Daily freezes of 30gb ipod

doesn't matter how strong the battery is. doesn't seem to matter how long i've been listening. but my 30gb ipod, which i've only had about two months, freezes every single day during playback. sometimes i have to reset it more than once a day. i've tried the five Rs to no avail. any ideas? thanks!

see doing this helps
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”

Similar Messages

  • 30GB Ipod skipping/freezing

    My 30Gb ipod is having a meltdown. It's decided that it doesn't want to play songs anymore. It can get 10seconds into a song then it starts to freeze up have trouble then skip to the next song and do the same thing. Sometimes it will get half way through a song before it does it or if i'm lucky it will actually play a whole song. I'm not sure how to fix this I'm thinking about doing a restore to factory settings. I did this last year when I had a different but equally serious problem. But I want to see if I can get more information before doing this as it's a last resort.

    Since the release and update of iTunes 7, I have not faced any problem, but I heard a lot of articles from this forum about the errors 1417, 1418, 1428 and 50 etc. I could not make any suggestion and find a solution about it, all I could do is to copy some threads from some successful cases mentioned on this forum.
    Until yesterday, I finally received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
    I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
    1. A window based PC
    2. A Mac computer
    3. An USB iPod cable
    4. A Firewire iPod cable
    5. An iPod AC charger
    As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
    How to reset iPod
    http://docs.info.apple.com/article.html?artnum=61705
    The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
    I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
    I changed my mind, and put the iPod into disk mode
    Putting iPod into disk mode
    http://docs.info.apple.com/article.html?artnum=93651
    Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore”, after a few seconds, an Error message pop-up with Error Message 1417, the sign that I have been waiting for quite sometime.
    I ejected the iPod and the screen immediately showed a folder exclamation mark (a sign indicating a corrupted or a failure iPod OS). I am forced to put the iPod into disk mode again, connected with the Mac computer and open the Disk Utility
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    It managed to complete the Restore process, and started to sync with the iTunes. However, it got stuck at the song no.238 from the total of 2000. I left it for an hour, but with no process, instead the iPod became “Hot” and the iTunes showed an Error message of 1428. I ejected the iPod from my Mac computer, the iPod’s screen turn to show the famous killer icon;“The Sad iPod“.
    This time it was totally dead, even failed to put it into Disk Mode and non of the computer could recognize it. Sigh, I hated to do it but I knew that I must did the following:-
    Holding the iPod in my Palm, and hitting it on a surface of a Sofa with 5 attempts.
    Did not surprise me, the iPod turned on and it showed the Language Menu on the screen. So, I put it into Disk Mode and connected with my window PC.
    The PC showed a sign and indicated that an USB device had been connected with it. I opened the iTunes and did a Restore there.
    However, an Error Message 50 showed up, but I were not worried about it, connected it back with my Mac computer with it in Disk Mode. As expected the iTunes opened and allowed me to do a Restore there.
    This time it managed to complete the process and a window of register pop up. After the completed the process, the iPod started to sync with the iTunes again, which finally managed to complete the process.
    I left it connecting with the AC charger overnight. In the next morning, I switched it on and have a play with it, I am so glad as it is working like a charm.
    From the above experience, I would like to share it with the user the following:-
    1. It always better to charge with an ac charger instead of the computer, as when an iPod carrying with very low battery, it may not able to get charge from a computer
    2. Try to connect the iPod with a computer, switching between USB and Firewire
    3. Try to format an iPod with HD problem, with a different kind of computer e.g. Mac or PC, as the formats are totally different, the way it formats may able to solve the bad sectors on the HD
    4. It may get better chance to get your iPod recognized, if you put it in Disk Mode
    I hope the following works in your case as I did.

  • 30gb iPod Video freezes

    Could someone please help me, or tell me if this is 'normal'?
    I bought a 30bg iPod Video about 10 days ago. I installed the software on my computer...reset the iPod when I first plugged it in. Loaded up about 750 songs and about 35 pics.
    The thing is, EVERYTIME I go running (basically every time I use it) it freezes. The play icon is still on the screen, but the song is not playing. Sometimes it happens in the middle of the song, sometimes before the song starts. (By the way, I always have the iPod on shuffle...does this make a difference?)
    Saturdat morning, I had to reset it 3 times!!!!
    The battery seems to run down fairly quickly, as well.
    Have I done something wrong, or did I get a bad unit.
    Help!

    So what the support guy says is fairly true. The video has a hard drive and a small RAM buffer. The nano is all RAM. Hard drive's don't like being moved around and if the video is reading the hard drive at the time, it's going to skip and potentially freeze.
    See iPod : Maximizing skip protection
    and Troubleshooting songs that skip on iPod
    So if you're using a playlist with any videos on it, that's really bad (cause videos eat up a lot of the RAm buffer).
    But if you have long songs that can aggravate the situation too.
    Best option is to get a nano or a shuffle if you want to run. If you want to try staying with the video and run, position it somewhere that minimizes motion (a fanny back or belt clip may help) or higher up on the arm for an armband.
    Oh, I just read your bit about having it on shuffle - yes that is bad. When it's not on shuffle it will read as much o the playlist as it can into RAM. When it's on shuffle, it doesn't know what the next songs are going to be. Even with shuffle off, manually changing songs repeatedly can have a similar effect. Just build a playlist you like and run with it.

  • Only certain purchased videos locking up 30GB iPod video

    What causes certain videos to lock up my 30GB iPod video, but not others? All the videos I have are either purchased or free podcast downloads; All from iTunes.
    I transfer the files all the same way to my iPod, by clicking and dragging the file to my iPod in iTunes.
    Some play all the way through without an issue.
    Some start at the beginning and then lock up after 10 or 15 seconds and I have to reset my iPod because it won't let me do anything else.
    Others start playing right in the middle of the video and then after playing for about 10 or 15 second, it locks up and I have to reset my iPod because it won't let me do anything else.
    I performed the 5 R's, no luck. I checked out and compared the file properties between one of the files that plays and one of the ones that don't. They're identical.
    I'm bummed because I'm paying for videos that I have to watch on my PC, not on my iPod. So what might be causing this problem?
    HP 1.9GHz Intel Pentium 4   Windows XP   30GB iPod video with software version 1.2 and iTunes version 7.0.1

    I have the same problem; at least there's more than one out there. One of the videos I downloaded eventually began to work (I'm not sure why) but it kept freezing up and the audio had horrible static. (When I played it on the computer through the ipod, it worked fine.)
    I cannot find an article on this site that explains what to do about that problem and apparently you can't simply send an email to a tech support center to ask about it. I guess I'll have to bring it to a store...
    Compaq Presario V2000   Windows XP  
    Compaq Presario V2000   Windows XP  

  • Daily Freezes/Blue Screen Shutdowns on HP M8100N Desktop Product GC673AA w/ Vista

    Hi - Hopefully someone can help me fix the Daily Freezes/Blue Screen Shutdowns on my HP M8100N Desktop Product GC673AA w/ Vista.  Occasional freezes started about 3 months ago and ocurred maybe once every 3 weeks.  They gradually progressed to the point that I am booted off my PC daily.  I've resarched message boards and tried to resolve on my own with no success.  I get different messages on The Blue Screen that appears since I changed the settings to not allow automatic shutdown.  Among the Error messages are the following:
         DRIVER_IRQL_NOT_LESS_OR_EQUAL. (i Wrote the additional detail  which I can provide if needed, but all of the messages reference disabling BIOS memory options for caching/shadowing)  I've tried but cannot find the option anywhere when I get into the BIOS screen.
         KERNAL_DATA_INPAGE_ERROR ( i CAN PROVIDE ADD'L INFO IF NEEDED)
         CHECK ADEQUATE DISK SPACE.  IF DRIVER IDENTIFIED IN STOP MSGE DISABLE OR UPDATE IT.  CHECK BIOS UPDATES.        DISABLE BIOS MEMORY OPTIONS
         BAD_SPOOL_HEADER
    These are 4 Blue Screen mesages since I changed the Shutdown settings.
    Any help would be appreciated.  I've tried all kinds of fixes with no success.  I only download basic HP, Vista, and basic software updates.  My spyware is AVG, Advanced System Care, and Spyware Dr.
    I've considered a System Recovery but have never been able to do a backup since buying the PC in 2007.  I always get the Error message:  BACKUP ERROR I/O Device Error OX8007045D.
    Any help resolving these issues would be greatly appreciated.  Thanks. 

    Hi Mark05,
    Please let me know if you need assistance. You might want to look at this document on reducing heat.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01657439
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • "Disk cannot be read from or written to" when syncing 30GB iPod

    "Disk cannot be read from or written to" when syncing classic 30GB IPod.
    We have a few thousand songs and about 50 videos on the above ipod. Just yesterday, we received the "disk cannot be read from or written to" message when trying to sync and charge the ipod.
    Our software is up to date, and we restored the factory settings, to no avail. The ipod actually starts to sync, but after about 20 mins. we receive this message and only 103 songs and 21 videos have been synced. We have a second newer ipod with 80GB which syncs from the same itunes account with no problems.
    We recently added photos, so we tried to sync the 30GB ipdo without the photos, but still received the subject error message.
    Please help!

    Sounds like a hardware problem - a bad disk or, at the very least, bad sectors on the disk in the iPod.
    There probably is not much you can do. You can try putting the iPod into disk mode and check the drive using Windows:
    Open My Computer
    Right click the iPod
    Choose Properties
    Go to the Tools tab
    Click the Check now button
    Windows may or may not be able to salvage the drive. You do not say if you can still use the iPod without errors; there is the possibility that you will lose data on the iPod during the repair.

  • Volume control problem with 30GB iPod 3G, Universal Dock, and Apple Remote

    I just hooked up my 30GB iPod 3G to the Universal Doc and tried the my new Apple remote. The only buttons on the remote that work in controlling my iPod while on the dock are the play/pause and the skip forward and back buttons.
    For some reason the volume up and down buttons don't adjust the volume on my iPod while it's on the dock. Any ideas? Shouldn't the volume up and down work? Or do they only work on the newer iPods?
    Any info appreciated.
    17' Aluminum Powerbook Mac OS X (10.4.3) 30GB iPod 3G
    17' Aluminum Powerbook   Mac OS X (10.4.3)  

    btabz,
    Thanks for your response. No the iPod doesn't respond at all--the volume display doesn't come up or change.
    When I press the play/pause or either skip forward or back on the remote, the iPod, while on the dock, lights up and responds to the command as it should. But when I press volume up or down on the remote the iPod does not respond at all.
    According to Apple's store info on the remote, the volume up/down controls should work. I am wondering if maybe it doesn't work with the 3Gs for some reason. But if that is the case, Apple should indicate that. It is kind of frustrating to not be able to adjust the volume.
    Thanks,
    gerb38
    17' Aluminum Powerbook   Mac OS X (10.4.3)  
    17' Aluminum Powerbook   Mac OS X (10.4.3)   30GB 3G iPod

  • 30GB iPod stops in middle of songs shows apple on screen

    I have a brand new 30GB iPod I'm running on Windows xp. In the middle or at anytime during a song the ipod with stop playing, show an apple against a black screen for about 5 seconds then return to the main menu.
    I have latest iTunes, I've updated it, restarted it and even fully restored it. It continues to have the problem.
    Please help.
    Thanks,
    Matthew.

    I never had the problem prior to updating the firmware on my iPod. I personally think that it's unacceptable, and needs to be addressed right away.

  • I have a 2004 30gb ipod colour.....it was previously set up so i could manage the music on an old mac book pro g4.....i now have a new mac book pro, but i cannot get the music from my old ipod on to my mac......how do i do this???

    i have a 2004 30gb ipod colour.....it was previously set up so i could manage the music on an old mac book pro g4.....i now have a new mac book pro, but i cannot get the music from my old ipod on to my mac......how do i do this???

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your Mac and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    Once you have successfully done that you can go ahead and choose Erase and Sync when you plug your iPod in.
    B-rock

  • ITunes 7.3.1 *SLOW* sync on 30GB iPod

    Hi everyone,
    Since upgrading to iTunes 7.3.1 my sync time for my 30GB iPod has gone from "quick" to "15 minutes or more." My library is rather small compared to others on this forum (only 25GB). I reloaded my iPod (OS and Data) and it is still slow. I can only assume something is weird with 7.3.1 or my install. Is anyone else experiencing this slow down?

    So, I am definately a true blonde. I didn't notice the iPod screen was able to scroll DOWN...thus making it obvious you can select to "manage manually" and thus play iPod songs in your iTunes...yeah, took me calling the iPod support store and waiting about 20 minutes to get that one... oops. =)

  • 30GB iPod Video Prevents ASUS A7N8X-X Mobo from Completing POST

    Greetings,
    I've owned my iPod for about a week now, but it seems to have a little bit of an issue with nForce 2 based ASUS A7N8X-X motherboards, specifically in regards to the fact that if the iPod is connected to the PC during boot, the motherboard will not complete its POST and the boot is aborted. Where the POST aborts isn't consistent, but the majority of the time, it will abort on or before the CPU diagnostic. If I disconnect the iPod and then reset the system, the motherboard completes its POST as it normally would.
    I was wondering if there were any other users who have experienced this. I have the current generation 30GB iPod Video and I'm using the dock cable that was included in the package.
    Thanks.

    Anything to do with this?
    http://docs.info.apple.com/article.html?artnum=93953

  • Bright white Screen on 30GB IPOD

    I bought a 30GB IPOD about three months ago. I was carrying the IPOD in my pocket with a radio tuner attached to it. I wasn't using the thing. I didn't run or even sit on it. It was in my pocket for about 5 minutes. When I took it out the screen was bright white. That's it, nothing else on it. I hooked it up to the computer. It doesn't even recognise it. The controls don't do any thing either. Anyone got any ideas?
    Dell   Windows XP  

    wait til the batteries run out. then connect it back to your comp.
    Or try the 5 R's
    1. Reset your iPod.
    2. Retry with a different USB port.
    3. Restart your computer.
    4. Reinstall iPod and iTunes software.
    5. Restore your iPod.
    i'd go for the first option though

  • The video button does not activate on itunes when i connect the 30GB ipod

    I have a 30GB ipod. when i connect it to the computer and start itunes, and go to the "ipod" tab, and then "video", after that, none of the video buttons are active (such as "actomatically update all videos"; "do not update videos" etc.
    I have the latest version of itunes and have also updated the software on the ipod.
    Please help me.

    That's because you must have the iPod under the Music tab set to either
    1-automatically update songs and playlists or
    2-automatically update selected playlists
    for the video tab to be accessible.
    Once you select auto update then go to the video tab and select auto update or playlist update for videos.

  • Firewire supposed to work on 30GB ipod w/video?

    I finally got a firewire to dock cable for my old 40GB iPod and it went kablooey...bought a new 30GB iPod w/video and when I plugged it into the firewire on my iMac I got an error message saying firewire wasn't supported!!
    WTH, Over?

    I finally got a firewire to dock cable for my old 40GB iPod and it went kablooey...bought a new 30GB iPod w/video and when I plugged it into the firewire on my iMac I got an error message saying firewire wasn't supported!!
    This news is akin to the raid on Pearl Harbor in terms of freshness. Your iPod comes with a USB cable and the FW can still be used to charge it (handy to charge on a computer not synced to the iPod), so why fret?
    Message was edited by: Charter Members of the Pokaroo Fan Club

  • I have a 30GB Ipod Classic with sync question

    I have not synced in quite a while. When I tried to sync this morning, I received the following message:
    "The ipod is synced with another iTunes library. Do you want to erase this ipod and sync wit this iTunes Library"?
    I see all of my music on the laptop library and all of the music ont he iPod itself, but i am concerned about what to do now.
    Please help.

    are you sure you have a 30gb ipod classic - the ipod classic is only 80gb and 160gb - if it is 30gb it must be an ipod video.
    would advise you to re-post your message in the correct forum so people can with more experience in the ipod video can help you.
    hope this helps!

Maybe you are looking for

  • Problems with safari screen grayed out unable to load pages from search

    Using IPAD last night and did a google search and google suggestions dialog box remains open along with keyboard, does not allow me to select any search results as the page is grayed out. When I try to select a new page, bookmarks of the back arrow I

  • How to check if a user has access to a responsibility

    Hi, I have a user_id in the controller. How do I know if this user has a particular responsibility added to him or not. I guess there a specific proflle call which gives this information. Can you give me that information. Thanks, HC

  • Connection mysql jdbc error ?

    I have program java likes this : import java.sql.*; public class LoadDriver {     // Define the JDBC Driver and the database connection URL     public static final String DRIVER = "com.mysql.jdbc.Driver";     public static final String URL = "jdbc:my

  • Tutorial to build a comments page

    I am looking for a comments tutorial that I can put on my webpage for a particular subject. Such as people wanting to make a comment on a movie and the ability to quote other people. I would like not to require people to login to leave a comment. Tha

  • Methods for migrating existing servers to new hardware

    I have 10 Solaris 8 and 9 boxes (SF4800 and V480). We are moving these to new hardware (V490 and V440). All have mirrored boot disks, some using VxVM and some using SDS. All are connected to SAN storage (Sun 3900 and EMC). I am looking for the easies