Daily Messages relating to (invalid field in cdb)

Hello all,
I am investigating a set of messages that occur at the same time every day. See excerpt below. They occur at 9:41 everyday and are shown in the oldest messages file which go as far back as May 1st. Is there anyway to find out what is causing these messages? The server is a Sun-Fire V440 running Solaris 9 with c1t0d0 and c1t1d0 hardware raided. I was not a part of the original setup so I do not have much details on how the initial configurations went. I have searched the net and found that the ASC:0x24 basically indicates an illegal request was sent to the device and is of no harm, but I want to know why they occur at the same time every day. Any help will be greatly appreciated. Thanks
May 29 09:41:15 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
May 29 09:41:15 servername      Error for Command: inquiry Error Level: Informational
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      Requested Block: 0 Error Block: 0ear
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      Vendor: LSILOGIC Serial Number: LSI INTERNAL
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      Sense Key: Illegal Request
May 29 09:41:15 servername scsi: [ID 107833 kern.notice]      ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
May 30 09:41:16 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
May 30 09:41:16 servername      Error for Command: inquiry Error Level: Informational
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      Requested Block: 0 Error Block: 0
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      Vendor: LSILOGIC Serial Number: LSI INTERNAL
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      Sense Key: Illegal Request
May 30 09:41:16 servername scsi: [ID 107833 kern.notice]      ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
May 31 09:41:16 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
May 31 09:41:16 servername      Error for Command: inquiry Error Level: Informational
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      Requested Block: 0 Error Block: 0
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      Vendor: LSILOGIC Serial Number: LSI INTERNAL
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      Sense Key: Illegal Request
May 31 09:41:16 servername scsi: [ID 107833 kern.notice]      ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0

Well from the old explorers I am inclined to think maybe its something else and not processes. Maybe what you said about the LSI card drivers sending bad values to the scsi drivers. From the old explorers also there was no iostat or vmstat or anything that looks suspicious in the process list. I am inclined to believe these messages existed since installation of the server.
Dec 26 15:05:06 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Dec 26 15:05:06 servername Error for Command: inquiry Error Level: Informational
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] Vendor: LSILOGIC Serial Number: LSI INTERNAL
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] Sense Key: Illegal Request
Dec 26 15:05:06 servername scsi: [ID 107833 kern.notice] ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
Dec 27 15:05:07 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Dec 27 15:05:07 servername Error for Command: inquiry Error Level: Informational
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] Vendor: LSILOGIC Serial Number: LSI INTERNAL
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] Sense Key: Illegal Request
Dec 27 15:05:07 servername scsi: [ID 107833 kern.notice] ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0
Dec 28 15:05:06 servername scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Dec 28 15:05:06 servername Error for Command: inquiry Error Level: Informational
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] Vendor: LSILOGIC Serial Number: LSI INTERNAL
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] Sense Key: Illegal Request
Dec 28 15:05:06 servername scsi: [ID 107833 kern.notice] ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0x0

Similar Messages

WaveBurner does't burn CD (Invalid field in CDB)

WaveBurner does't burn CD (Invalid field in CDB)

+a lack of free space on my hard drive (10 GB unused).+
I don't know what the 'invalid field in cdb' is, but that amount of free space is not enough to run the app. You need to keep at least 25 GB free.
However, I researched that error message and it may indeed be some incompatibility with the drive.
Can you create a disk image file?
If so, then iDVD is not the problem. You can then probably burn to disk from the disk image file using Disk Utility or Toast.
Post back if this does not help.

WaveBurner - invalid field in cdb

I have been using logic for years and have never had this problem with Waveburner. I went to burn a copy of a master, the only difference in it and earlier copies is I was adding the ISRC. When trying to burn I got this message:
"Disk drive didn't respond properly and cant recover or retry. Invalid field in CDB"
Any ideas on what the problem might be?
WaveBurner 1.6.1.(331.9)
Model Name:          MacBook Pro, Mac OS X (10.6.8)
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
HL-DT-ST DVDRW GS21N:
Firmware Revision:          SA18
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO

+a lack of free space on my hard drive (10 GB unused).+
I don't know what the 'invalid field in cdb' is, but that amount of free space is not enough to run the app. You need to keep at least 25 GB free.
However, I researched that error message and it may indeed be some incompatibility with the drive.
Can you create a disk image file?
If so, then iDVD is not the problem. You can then probably burn to disk from the disk image file using Disk Utility or Toast.
Post back if this does not help.

Cannot edit wiki pages-- Exception message: Invalid field name

We have migrated from one Sharepoint 2010 environment to another Sharepoint 2010 environment and only wanted to preserve a few sites, mostly Enterprise Wiki Sites.
We have imported 5 total Enterprise Wiki Sites, all of which point to particular Term Sets in Managed Metadata.
2 wikis are pointed to term set A, 2 wikis are pointed to term set B and one wiki is pointed to term set C.
One of the wikis pointed to term set A is working, and one is not
The malfunctioning wiki has the following symptom:
Whenever you try to edit a page (new or existing) and save your changes, regardless of whether it is tagged, you cannot save your changes. When you try, you get the error below.
Error
Failed to get value of the "Wiki Categories" column from the "Managed Metadata" field type control. See details in log. Exception message: Invalid field name. {f863c21f-5fdb-4a91-bb0c-5ae889190dd8}
https://sharepoint.domain.com/wiki/adminwiki /wiki/adminwiki/Pages.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 4188c150-de8f-4940-9dbd-54939f117bfe
Date and Time: 3/12/2012 4:26:09 PM
Go back to site
To me, it looks like there is an invalid URL, since it gives the URL path, and then there is a space, and then it also has a relative URL to /wiki/adminwiki/pages ...is this normal?
Any ideas on how to fix this is great. I don't think it has anything to do with the Managed Metadata service or the Term Store since the other wiki site (pointing to the same exact Term Set) is working normally with no problems.

To solve the problem make sure that the template you are using for the current page (with errors) has the same content type as the page. In example of the Enterprise Wiki page, I forgot to set the content type to an Enterprise Wiki page on a custom page
template I just added to the Master pages.
So what I had to do is:
go to properties of the page with errors described above and set it to be
Enterprise Wiki page
go to master pages and set the custom template to be of the same type, Enterprise Wiki page
That solved the problem

Error Message (ORA-01722: invalid number) when add amount into Number field

I am using VB.net, trying to insert data into a field called amt with Data Type 'Number'.
my vb.net code is as follows
Dim oradb As String = DatabaseConnectionString
Dim AmountValue As Decimal = 123.45
'get the connection
Dim conn As New OracleConnection(oradb)
'open the database connection
conn.Open()
'create oracle command
Dim cmd As New OracleCommand("INSERT INTO TBL1 (AMT) VALUES (:AMT)", conn)
cmd.CommandType = CommandType.Text
cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
'Execute
cmd.ExecuteNonQuery()
I got error message "ORA-01722: invalid number". Please help

Did you also change the below line before inserting Integer 123:
cmd.Parameters.Add(":AMT", OracleDbType.Decimal, AmountValue, ParameterDirection.Input)
to
cmd.Parameters.Add(":AMT", OracleDbType.Integer, AmountValue, ParameterDirection.Input)

TS1292 itunes says my itunes card "has not been properly activated" when i enter the code. this is not the "invalid" message related to entering the code improperly.

itunes says my itunes card "has not been properly activated" when i enter the code. this is not the "invalid" message related to entering the code improperly.

Are you able to go back to the store that you bought it from and ask them to activate it properly ? If not then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

"Invalid Field Name" Error message on Client System

Hi all,
I have installed some addons on server, and the same is installed on client systems as well. on server everything works well. But when it comes to client systems, one particular form shows an error message, "Invalid Field Name", on loading the form.
I have the same .srf's as on server but still the problem persists. If anybody knows the cause of the problem, please let me know what could be the reason.
Regards,
Rohan S. Kamble.

Hi Rohan,
Are you sure you have the same version of DI (also addon) on your client and your server side?
Reinstall the addon on your client, check if the problem still happens.
Regards,
Jay.

BAPI-structure: invalid change message while changing structure field lengh

Hi Experts,
I've one structure which is used in many BAPIs.
I want to change the field lengh of one of the field in the structure.
When I'm activating it, it is giving me message BAPI-structure: invalid change.
Can you help me on this issue ?
Naimish.

Look at [BAPI Programming Guide (CA-BFA)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf]
If your BAPI is released, you wont be allowed to change the structure, so you should un-release the BAPI, BOR and FM before updating the structure parameter.
Regards

Exception message, failed to get value, could not load managed metadata, invalid field name

Hi, i have created some site collection columns with managed metdata and taxonomy term sets. I have then created some site content types of those site columns. Some of them function properly and some don't.
When i have created or uploaded a document to the document library i start to "tag" the document by first choosing witch conent type i want too use, but when it comes to save the document it renders an error message(its not the full content
of the message):
"exception message, failed to get value, could not load managed metadata, invalid field name"
I have created some other site content types before and with the same site columns and they do not generate a error message. Is there a solution for my dilemma?

try these links:
https://prashobjp.wordpress.com/2014/02/14/failed-to-get-value-of-the-column-name-column-from-the-managed-metadata-field-type-control-see-details-in-log-exception-message-invalid-field-name-guid-site-url/
http://www.sharepointconfig.com/2011/03/issues-provisioning-sharepoint-2010-managed-metadata-fields/
http://blog.goobol.com/category/sharepoint/sharepoint-issue-troubleshooting/
http://www.instantquick.com/index.php/correctly-provisioning-managed-metadata-columns?c=elumenotion-blog-archive/random-whatnot
https://pholpar.wordpress.com/2010/03/03/taxonomy-issues/
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

Error Message - ORA-01722 Invalid Number

Hello:
I have the following situation. When I create an organization, a record is inserted into the following table, AGREEMENTS, and populates four fields.
I have an update form which selects the organization from the AGREEMENTS table so the user can populate the rest of the table. In addition, on this form, there is a drop-down box which allows the user to select the name of a legal document along with the version of the document in which the user needs to select. This select list is created via an LOV joining three tables. The item name for this select list is :P6_DOCUMENT.
The code for the LOV is:
SELECT S.DOC_NAME||' - '|| O.VERSION_NO AS DOC, O.ORG_DOC_CURR_KEY
FROM SUPPORTING_DOCS S,
     ORG_DOC_CURR_VER O,
     AGREEMENTS H
WHERE
    S.DOC_TYPE = 'HISA'
AND S.SUPPORTING_DOC_KEY = O.SUPPORTING_DOC_KEY
AND H.ORG_KEY_LE = O.ORG_KEY
AND O.ORG_KEY=:P6_ORG_KEY_LEWhen the user completes the form, the SUBMIT process is a PL/SQL block consisting of an UPDATE statement to update the AGREEMENTS table based on the selected organization and an INSERT statement to insert a record into the AGREEMENTS_DOC table to store the value stored in :P7_DOCUMENT.
Ok, now here is where my problem starts.
When I first bring up the form and I select the organization I want to update, I click the Search button to find the organization and I receive the following error message: ORA-01722 Invalid Number.
At this point all I'm doing is a basic search. There is no insert/update or anything going on. I'm not understanding why I would be receiving this error message.
The search is based on the database column ORG_KEY_LE whose datatype is NUMBER.
In my application, the item assigned to ORG_KEY_LE is P6_ORG_KEY_LE.
I have a PL/SQL block process created (On Load-Before Header) in the Page Rendering area of my page definition. The PL/SQL code that is written is:
BEGIN
IF :P6_SEARCH_ORG != '0' THEN
:P6_ORG_KEY_LE := :P6_SEARCH_ORG;
END IF;
END;I then have an Item created, :P6_SEARCH_ORG, which is a Select List. In the LOV portion of the page for this item, I have the following:
select ORG_KEY_LE display_value, ORG_KEY_LE return_value
from AGREEMENTS
order by 1The reason for using this table is because this table contains the newly created organization which needs to be updated with the remaining columns of data.
I then have a Search button in the Button area which has the following settings:
Button Position: Region Template Position #CHANGE#.
Condition Type: Value of Item in Express 1 is NULL.
Expression 1: :P6_ORG_KEY_LE.
To troubleshoot this problem, I created two pages, one page to do the UPDATE and the second page to do the INSERT.
The SEARCH functionality in both pages are identical.
When I run my UPDATE page, which only involves updating the missing fields, the process works. I have my search box, I'm able to search for the organization, make my updates, and I'm good.
When I run my INSERT page, which involves inserting the record with the assigned document, I receive the error message after I click the SEARCH button. In order to INSERT the record into this table, I first need to SELECT the organization that was UPDATED in the AGREEMENTS table (using the UPDATE page described in above paragraph). When I select the organization, the user can then assign the appropriate legal document to the organization and insert the record into the AGREEMENTS_DOC table.
Can someone help me with this error message? I'm not sure why I am able to perform my SEARCH on a page with the UPDATE statement, not able to perform the SEARCH on the page with my INSERT statement, and not be able to perform the SEARCH on the page that combines the UPDATE and INSERT statements.
I did some more troubleshooting and I do believe my SUBMIT process which contains the INSERT statement is the issue. I created a fourth page which doesn't have a SUBMIT process. I brought up the form, searched for my organization and the information for that organization appeared. The problem is definately with my UPDATE/INSERT process.
The PL/SQL block for the Submit process is the following:
BEGIN
update
    MDD.HISA_AGREEMENTS
     set
       LAST_UPDATED_BY=V('APP_USER'),
       APPROVER_SALUTATION=:P6_APPROVER_SALUTATION,
       APPROVER_FIRST_NAME=:P6_APPROVER_FIRST_NAME,
       APPROVER_MIDDLE_INITIAL=:P6_APPROVER_MIDDLE_INITIAL,
       APPROVER_LAST_NAME=:P6_APPROVER_LAST_NAME,
       APPROVER_NAME_SUFFIX=:P6_APPROVER_NAME_SUFFIX,
       APPROVER_EMAIL_ADDR=:P6_APPROVER_EMAIL_ADDR,
       SPONSOR_EMAIL_ADDR=:P6_SPONSOR_EMAIL_ADDR,
       APPROVER_TITLE=:P6_APPROVER_TITLE
where
      ORG_KEY_LE=:P6_ORG_KEY_LE
INSERT INTO
    HISA_AGREEMENT_DOCS
      (HISA_AGREEMENT_DOC_KEY,
       ORG_KEY_LE,
       APPLICATION_KEY,
       STATUS,
       STATUS_DATE,
       CREATED_BY,
       ORG_DOC_CURR_KEY)
VALUES
      (HISA_AGREEMENT_DOC_KEY_SEQ.NEXTVAL,
       :P6_ORG_KEY_LE,
       :P6_APPLICATION_KEY,
       'C',
       SYSDATE,
       V('APP_USER'),
       :P6_DOCUMENT)
END;There is something wrong with the above statement and I do not understand what it could be. Can someone help?
Thanks for the help.

Hi,
I believe you are on to something.
The select list for item :P6_DOCUMENT appears when I first bring up the form. When I select my organization and receive the error message, I clicked on the Session in the Developer's bar. The value in item/field :P6_DOCUMENT shows %null%.
This is the path in which my user would like to accomplish her task:
1. Select an organization
2. Display the information for that organization from the AGREEMENTS table
3. Enter the data for the remaining fields in the AGREEMENTS table
4. Select the document (:P6_DOCUMENT) from the drop-down.
5. Click Submit
6. Update the AGREEMENTS table with data entered in #3.
7. Insert a record into the AGREEMENTS_DOC table with the selection from #4.
Somehow I need the :P6_DOCUMENT field not to show the %null% during the SEARCH functionality. I think that is causing the problem.
How do I fix this?

Invalid field in parameter list. (0x26, 0x00)

I was archiving my old family videos and making a nice movie of them in final cut express. I exported them the same as I always do and created a menu using the reflections theme in iDVD. The movie was big so I adjusted the settings for DVD+R DL as I hae done before and clicked burn. I use and external Sony DVD Burner that is wonderful and has never given me any trouble.
After about ten hours I came back and there was an error message.
Burning Finished
Errors were found during the burning process
OK
When I clicked on the down arrow this appeared...
The recording device reported the illegal request: Invalid field in parameter list. (0x26, 0x00.)
So i clicked ok and this appeared...
Multiplexor Error
There was a problem during multiplexing/burning
ok
So I clicked ok and took the dvd to try and play it in a DVD player, obviously it wouldnt work so I quit iDVD and restarted my mac. I tried the process agian with another DVD and after 10 hours, same message and same result. So I went to the store and got sony DVDs (I was using memorex ones), but still, even with sony's DVDs I go tht esame message.
PLEASE HELP ME
imac G4 Mac OS X (10.4.10) 800 MHz PowerPC G4, 512 MB SDRAM

I'm glad to be here.
However this doesn't help. When I click on the link
and error message appears.
Today is very frustrating
Yikes! I surely didn't mean to add to your aggravations today!
Try this:
http://discussions.apple.com/thread.jspa?messageID=4664212&#4664212
:)Sue

Invalid field format (screen error) on Table Control

Hello,
When selecting a line or multiple lines on a screen made by me(using a Table Control), I get Invalid field format (screen error). Debugging the code it sends the message when looping the internal table on PAI to check if there were values changed. Is there a reason why this error appears on this?
loop at it_values.
    chain.
      field pvalues-BEGDA.
      module CHANGE_QUEUE.
    endchain.
endloop.
Thanks.

No need to loop to check whether data is changed after PBO, just check System Field SY-DATAR, it will be set to 'X' if any field was changed.
So the following code is enough;
IF SY-DATAR EQ 'X'.
   PERFORM SAVE_DATA.
ENDIF.
Regards
Karthik D

Error Invalid field format (screen error) in module pool

Hi
experts i am doing module in whichi had many check boxes on screen and each check box has function code means i want to do some thing else . but as i click the first or any other check box i get a error message
INVALID FIELD FORMAT (SCREEN ERROR).
Can anyody help me with this asnwers will be rewarded points .
regards

Dear Farukh,
can you please let me know how have you declared you check boxes.
how did you handle the click or the function codes in the user command module in your PAI.
The declaration of your fucntion codes can be done when you create your screen fields and then they need to be handled in the user command module i.e what you want to do when suppose you click on that particular check box.
Thanks
venugopal

Invalid field format (screen error)

We are using custom module pool report for displaying information. Information display in Table control which has also Radio button option for the further processing. After unicode conversion we are getting error while accessing the screen as "Invalid field format (screen error)" when user select Radio button. In production environment we are not facing any issue, but in Dev + Qas we have this issue. Nothing is changed as all environment are sync. To solve the issue we re-defined the Radion screen element, but no success we are still getting same error. I am not sure whether it is related to Page Format or something else. Could you please let me know whether anybody faced this issue ? For the information, I already searched on SDN and SNote, but there is no post or SNote

Have you checked if there are overlapping fields on the screen.
I've seen simular errors and usually it was beacuse of some change by SAP that made it so that the defined length of the screen field was suddenly to small.
I'm not saying that this is the case in your situation, but it never hurts to try and change the length of your screen field and see if that resolves the issue.
Arthur

Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

Hi!
Need some help with the same:
Help Needed - My BB 8520 Curve has this message-CRTranRec::GetLinkedRecordID:Invalid linked record id while sychronisation using the desktop software

Hi sameer197301 and welcome to the BlackBerry Support Community Forums!
To clarify, are you seeing this message displayed on your BlackBerry® smartphone or on your computer?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Daily Messages relating to (invalid field in cdb)

Similar Messages

Maybe you are looking for