Daily Monitoring of PRD of BI, XI, ECC, through Solution manager

Dear all ,
I have only configured Earlywatch alert for BI , ECC 6.0 on Solman(every week monday i got EWA report and  I have taken action as per the EWA report).
Now my question are ,
Daily Monitoring of PRD of BI, XI, and ECC is possible ?
Weekly Monitoring of DEV & QAS of BI, XI, ECC, ?
EWA for XI is possible ?
Finally how can i completely use Solman server for monitoring ,etc....
Kindly advise
Regards

Hello,
Daily Monitoring of PRD of BI, XI, and ECC is possible ?
Of course possible, what kind of monitoring are you looking for?
Using the System administration functionality you can perform the pro-active monitoring, which will also trigger auto reaction methods whenever the thresholds are reached, as per the setup performed.
There are SAP standard parameter monitoring available, in addition you can define your own parameters to be monitored in the System administration workcenter functionality.
Weekly Monitoring of DEV & QAS of BI, XI, ECC, ?
You can use the central system monitoring functionality which enables you to perform monitoring tasks as per the period/frequency specified.
You can also input your/teams monitoring notes/observations and generate it as a separate report.
EWA for XI is possible ?
It is possible; for ABAP stack, perform the same steps as you performed for other ABAP (ECC) systems, for Java stack of XI, configure the Solution Manager Diagnostics which will trigger the EWA for Java part. Finally you receive a consolidated (ABAP+Java) EWA next Monday.
Finally how can i completely use Solman server for monitoring ,etc....
EWA, SLR provide you with a reporting functionality which again is a result of monitoring your system over the previous week.
Using System administration and Central system monitoring you can leverage the monitoring capabilities.
Using SMD, Wily you can extend the monitoring of Java and dual stack systems
Using BPMon you can attain the Business process monitoring.
In addition, in the work center you can see additional monitoring options, like. RFC monitoring.
Hope this helps.

Similar Messages

  • How to monitor all SAP Server through solution Manager?

    Dear Friends,
    How to monitor all SAP Server through solution Manager?
    Is it possible if yes then how? Please forward configuration and transaction also.
    Please help me as early as possible..
    Thanks,
    Regards,
    Sachin

    Hi sachin,
    You can monitor your sattilite systems through solution manager.
    If you want to monitor systems in solution manager means you need to configure those systems in solution manager.
    Before including the systems in solution manager we need to create a solution using tcode <b>DSWP</b>.
    After that you can include the systems using tcode <b>SMSY</b>.
    For configuring the systems we have lot of phases its very difficult to explain here.
    Try to login to<b> service.sap.com</b> and <b>help.sap.com</b> find the helpfull guides.
    i hope it will help you.
    any issues post it.
    kiran kumar.v

  • Monitoring of Standalone EP 7.0 system in Solution Manager 7.0

    Hi Experts,
    I need to configure Solution manager 7.0 for monitoring EP 7.0 (Stand alone ) system.
    Can you share documents related to configuration of Solution Manager 7.0 for monitoring EP 7.0 system?
    Thanks,
    Anit

    Hi,
    EP Monitoring is done by Solution Manager Diagnostics.
    Some Basis steps for ref
    1. Definition of EP system thru SMSY in solution manager system
    2. SMD agent installation in EP system with CCMS ping cofiguration in both solman and EP system
    3. Wily Introscope Enterprise manager installation in solution manager system
    3. From SMD wizard, you can configure the list of activities to be monitored for a EP system.
    For detailed info check SMD installation guide
    Regards
    KT

  • How to Configure Solution Manager for 1.Download SuppPacks 2. Monitoring 3

    We recently upgraded to ECC 6.0 and installed Solution Man., very vanilla.  Basically just to get the Key to do the upgrade with.
    I would really appreciate it if someone could share any documentation that would provide guidance on how to now further configure SolMan for the following
    1.  Monitor our Landscape which comprises of ABAP ECC (java is installed though not actively using), and SAP BI 7.0
    Sandbox, Dev, QAS and Prdn  for BOTH ECC & BI
    2. Download Support Patches from SAP Marketplace (currently we have had to donwload the long way with download manager creating a message to get them apporoved whew... this is work..)
    3. Add messages to SAP Market Place (thru SolMan)
    4 Possibly monitor security and manage userids etc (if possible)
    And if there is functionality that will make the BASIS experience better I would definitely appreciate it.  We don't need the help desk as we already have it ,but, we may take advantage of Project documentation
    I would really really appreciate it if someone could advise
    Kind Regards & Thank You
    Maria

    Hi Maria,
    With solution manager you can definitely do a world of things, below is a list inclusive of the features you wanted:
    1. Dowload SP-Stacks, etc - you will have to configure Maintenance Optimizer for this (MOPZ).
    2. Monitoring - you can monitor your ABAP and JAVA stacks using the monitoring features of CCMS which is embedded in Solution Manager, please have a look at the monitoring setup guide (for NW04S) in the Service Marketplace. Basically, it uses agents such as SAPCCMSR for JAVA Stacks and SAPCCM4X for ABAP stacks.
    3. You can also configure availability monitoring using th same guide as above - this uses the CCMSPING tool.
    4. You can monitor your business processes using the BPM/BPMon features of solution manager - you will also get this guide in http://service.sap.com/solutionmanager.
    5. You can scheule your earlywatch alerts (EWAs) in solution manager system - have a look at the following link for this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0f35bf3-14a3-2910-abb8-89a7a294cedb
    6. You can also have DBACOCKPIT on your Solution Manager system and have it tomonitor backups, etc on your satellite systems. For thsi have a look at SAP notes 1028624, 1025707 and 1027146 (and the DBACOKPIT guide in SAP Note 1028624).
    Hope this is helpful. Kindly award points if useful.
    Thanks, Dibya

  • Monitoring EWA in solution manager for EP

    Hi
    How to monitor and configure the EP 7.0 on solution manager 7.0 for SP 16
    Can any body give the doc and steps to do.
    Regards

    Hi,
    Follow Guides
    Setting Up your Central Monitoring [original link is broken]
    Notes
    987835 - How to define Solutions in SMSY for Diagnostics
    976054 - Availability of EWA for Non ABAP components
    Prerequisites
    The SAP EarlyWatch Alert is available for:
    SAP systems based on ABAP stack of SAP Netweaver or SAP WebAS
    SAP R/3 (minimum release 3.1H)
    The Java stack of SAP Netweaver components with a J2EE Engine 6.40 or above (requires ST-SER 700 2007 1 or above on the Solution Manager)
    The main prerequisites for using SAP EarlyWatch Alert are:
    A remote connection between your SAP component and your SAP Solution Manager
    On a ABAP stack system implement SAP Note 69455, run report RTCCTOOL and follow instructions.
    For a Java stack system or a CRM system: setup of Solution Manager Diagnostics. For Java SAP Note 976054 describes the prerequisites.
    The EarlyWatch Alert content is shipped on the Solution Manager with software component ST-SER u2018SAP Solution Manager Service Toolsu2019 and on the satelite systems (ABAP) with software components ST-PI u2018SAP Solution Tools Plug-Inu2019 and ST/A-PI u2018Application Servicetoolsu2019.
    Chk Pdf
    https://websmp201.sap-ag.de/~sapidb/011000358700002009362008E.pdf
    /people/federico.babelis2/blog/2006/04/25/system-monitoring-configuration-guide-for-dummies
    Hope it solves ur problem
    Regards
    Prakhar

  • Technical monitoring in solution manager 7.1

    Hi ,
    Can you please some one provide the technical monitoring(7.1) document.
    Thanks in Advance.
    Vijay R.

    Hi Vijay,
    Please check the below link
    System Monitoring - How-to Guides - Technical Operations - SCN Wiki
    http://wiki.scn.sap.com/wiki/download/attachments/269157890/Setup+System+Monitoring+and+Alerting.pdf?original_fqdn=wiki.…
    Solution Manager 7.1 Technical Monitoring - YouTube
    https://websmp209.sap-ag.de/~iron/fm/011000358700000209892011E/002007974700003419442012WRK2?TMP=1403552583690
    Rg,
    Karthik

  • System Monitoring though Solution Manager

    Hi ,
    Can someone tell me SAP Notes for doing system monitoring through Solution Manager if i don`t want to use CCMS .

    Hi
    I think you are looking for Central monitoring using Solman .. If yes please go through the following links
    http://service.sap.com/moniotring
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
    You are still going to use CCMS but if an alert occurs in satelite system , it will forward this alrt to Solman and solman will send out the alert .This happens if you configure central auto reaction , You can also monitor other system by adding the systems to Solman using SMSY_SETUP/SMSY  and define solution using DSWP/SOLUTION_MANAGER . These are well documented with screens in
    http://service.sap.com/rkt --> Solution manager --> Solman Manager < rel > --> Technology Consultants and System Administrator     
    I dont think there is any note which talks about the entire configuration
    Thanks
    Prince Jose

  • Daily monitoring tcode for PI system

    Dear All
    Please tell me daily monitoring Tcode for PI7.0 system
    Regards
    Jitendra Singh

    Hi Jithendra,
    Basic tcodes like SMQ1,SMQ2,SM59,SM50...ECC side all normal tcodes..Above tcodes are for PI consultants.
    Take a look at it
    Complete List of SAP Basis TCode - Basis Corner - SCN Wiki
    Hope it helps.
    Regards,
    Kannan

  • Is cutomization possible in NWA for having Daily Monitoring?

    Hi All,
    I'm working on NWA Administration & Monitoring stuff & need to know, wether customization is possible in it, by which i can have Daily monitoring stuff going in it by way of Common Tcodes like SM21, ST22 etc? I know this can be done in EP, but can i get this developed in NWA too?
    Waiting eagerly for reply.

    hi,
    I think you can use JSF
    cheers
    Trajano

  • Detailed list of daily monitoring activities in Basis

    Hello Experts,
    I need a detailed list of daily activities and transactions that are to be monitored in SAP BASIS as system administrator. Iam looking out for such a document since long but could not find one . I need the activities and transactions list along with details of analysis that if something goes wrong or something is missing while performing any activity / transaction ,how to check that and how to rectify that along with descriptions of technical terms used for analysis in the transaction or during performing an activity.
    I hope ppl must hv prepared such a detailed analysis list for monitoring their R/3 , BIW , Solution Manager and Portal systems . Requested to forward the needful document to me at earliest on my Email id [email protected] .
    Good points guaranteed as this document is very urgent to me so shall go out of way to assign more points if document is useful .
    Thanks and Regards,
    Somya

    Daily Task:
    Check that all application servers are up.      SM51 – SAP Servers
    Check the CCMS alert monitor      RZ20 – CCMS Monitor - Look for Alerts
    Check work processes (started from SM51).      SM50 SM66 – Process Overview - Analyze work processes with a very long "running" status or status "complete"
    Look for any failed updates (update terminates).      SM13 – Update Records Check all updates with status error
    Check System Log      SM21- System Log      Check for: Errors
    Review for cancelled and critical jobs      SM37 – Select Background jobs      Review any cancelled or long running job
    Check for "old" locks      SM12 – Lock Entry List      Check for locks older than one day. Analyze
    Check users on system      SM04 – Users AL08 – Users      Review for unknown or different user ID and terminal. Take a look at the user distribution on servers
    Check for spool problems      SP01 – Spool List      Look for spool jobs that have been "in process" for over an hour.
    Review and resolve short dumps      ST22 - ABAP Dump Analysis      Look for an excessive number of dumps Look for dumps of an unusual nature
    Review workload statistics.      ST03 – Workload: Analysis of <sid>
    Check QRFC      SMQ1 - SMQ2      Check no. of queue entries, deregister and register queues
    Check TRFC      SM58      Check hanging TRFC's
    Review UNIX system logs for problems.      OS06S – OS Monitor      Review operating system log
    Review buffer statistics.      ST02 – Tune Summary      Look for swaps
    Please note that above list is to be understand and accordingly check respect to your SAP R/3 system. Any decision to be taken is depend on your system and your analysis. This is just the few transactions which is given to help you to start with your activity.
    Reward points if this is of any help to you.
    Thanks
    Best Regards,
    Chetan Khatri

  • Solution manager 7.1 installation in ECC 6.0 landscape

    Dear All,
    I am planning to install solman 7.1 SP04 in my landscape where the managed systems are running on ECC 6.0. SP 07(PRD, DEV,...).
    Is it fine to start installation with current landscape or i need to upgrade the ECC version.
    Any documents available regarding the technical system patch level requirements for Solution manager 7.1 installation.
    Please suggest.

    Hi Jithu,
    Pls refer below links,
    Solution Manager installation 7.1
    SAP Solution Manager 7.1 – SAP Help Portal Page
    Dia Agent Connect To system in solman 7.1 sp10
    Regards
    K.N

  • System Monitoring in Solution Manager 4.0

    Hi all,
    I want to set up system monitoring for landscape BW, ECC and SCM systems using Solution Manager 4.0 and am new to Sol Man.
    So could anyone please help me with the steps.
    Thanks in advance,
    Sandeep.

    Sandeep,
    Trust me, there is no one resource that you can refer to and complete this system monitoring project. I recently configured this a couple of days ago. I can tell you that I haven't completed it yet. I have only completed the configuring the 'System Monitoring' part of it. I am yet to define monitors so that, I can monitor what I want of the satellite systems. So far, it took me about 4 days. Let me point out the basic steps you need to follow. Beyond that, please refer to the links I paste below:
    Steps to configure 'System Monitoring' in Solution Manager:
    1. Follow the 'Solution Manager Preparation' found under SPRO --> Solution Manager --> Read Me.
    2. Make sure you have the latest ST-ICO and ST-SER installed in your Solution Manager (Note: 892412).
    3. Make sure the Solution Manager has the latest support packages applied.
    4. Prepare the 'Satellite Systems' as per note 455356:
         a. Create the role 'SAP_BC_CSMREG' (if it doesn't exist) with the following authorization objects
              --> S_CCM_RECV (with the objects and values mentioned in the above note)
              --> S_RFC (with the objects and values mentioned in the above note)
              --> S_RZL_ADM (with the objects and values mentioned in the above note)
              --> S_CUS_CMP (with the objects and values mentioned in the above note)
         b. Create a 'communication' user CSMREG (if it doesn't exist) and assign the profile S_CSMREG
    5. Create the user CSMREG in Solution Manager using RZ21 transaction
              -->RZ21 --> Technical Infrastructure --> Configure Central System --> Create CSMREG user (Provide the required password and confirm).
    6. An agent needs to be registered in all the satellite systems that collects the monitor statistics and pass on to the Solution Manager. Before registering the agent in the satellite system, a 'CSMCONF' file has to be generated in the Solution Manager and store it in a central location which, will be used by the CCMS agent while registration. This CSMCONF file holds the communication details for the agent to talk to the Solution Manager. To create CSMCONF file, proceed as follows:
              --> RZ21 --> Technical Infrastructure --> Configure Central System --> Create Start CSMCONF for Agents
              --> Store the file in a central location that can be accessed by the satellite system/s.
    7. In the satellite system, copy the file 'CSMCONF' to the working directory of SAPCCM4X (F:\usr\sap\PD1\SYS\DVEBMGS01\log\sapccm4x - for example. If the 'sapccm4x' folder does not exist, create one).
    8. Copy the downloaded 'SAPCCM4X.exe' file to the kernel directory on the satellite system.
    9. Execute "sapccm4x -R pf=<path of the instance profile>". This should ask for the 'CSMREG' password and the admin user password on the solution manager system. Please input the same and confirm other questions. Upon confirmation, the CCMS agent should be registered in the satellite system.
    10.Make sure you establish the trusted RFC connection on the Solution Manager to the satellite system you would want to monitor. This you can do from 'SMSY' transaction.
    11.After successfully creating the RFC connections, and assigning the system to a logical component, please go to transaction, 'SOLUTION_MANAGER'. You can see the monitored system in the System Overview.
    Below are the reference links:
    Weblogs Related to Solution Manager
    Hope this helps. Award with relevant points if my response is helpful.
    Thank you.

  • Solution Manager 4.0 Solution Monitoring User -Roles-Profiles for Satellite

    Hi All,
    I have installed Solution Manager 4.0 (OS -Linux ,Database - DB2) .
    Now i need to connect solution manager to the R/3 4.6C
    Satellite Systems (DEV, QAS ,PRD) for Solution Monitoring
    and Service level Reporting .
    I have read the configuration guide , but unable to get clear idea .
    1) what users (alos type of user -Dialog , Service, Communication etc) do i need create in DEV , and Test in QAS  for solution Monitoring  .
    2) what exact roles /profiles need to be assigned to these users in satellite systems .
    3) what users/roles /profiles needs to be done in SOLMAN system
    i have applied all the required plug ins and support packs
    in satellite systems and solman 40 ..
    Please advice  . Your response will be a great help for me .
    Satish

    Hello Satish,
    Just clarify, if u have meant connecting the satellite systems for EWA reports to be precise. Early watch Reports. If its is the case, then repond so that i can putin my inputs which may be helpful for you in this config.
    Rgds,
    Sri

  • System Monitoring Setup in Solution Manager

    Hello Experts,
    We are going to implement and configure Solution Manager - System monitoring setup for pre testing purpose
    Currenly we have installed below SAP Systems
    1.Solution Manager Server
    2.ECC server (Without Ides) - Abap
    3.CRM Server (Without Ides) -Abap + Java
    We need to setup below tasks in Solution Manager
    1.Early watch alert
    2.System Monitoring
    3.Central System Administration
    4.Business Process Monitoring
    5.Service Level reporting
    1.Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
    Could you please someone give input reg this.
    Thanks
    Thirumal
    Edited by: Thiru Thirumal on Aug 6, 2008 4:56 AM
    Edited by: Thiru Thirumal on Aug 6, 2008 4:57 AM

    Hi,
    Q. Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
    A. Yes.
    Check with links for
    1.Early watch alert
    This process helps you to identify potential problems early, avoid bottlenecks, and monitor the performance of your ABAP and JAVA systems and your most important business processes, regularly, automatically and effectively. The data collection infrastructure comprises the ABAP Service Data Control Center and the JAVA function module Data Provider. The SAP EarlyWatch Alert in the SAP Solution Manager is a service provided by SAP.
    To be able to use it, you have:
    maintained the non-ABAP systems correctly in the system landscape maintenance (transaction SMSY)
    RFC u2013 Connections between: and an RFC u2013 Connections established.
    your satellite systems and the SAP Solution Manager system
    SAP Solution Manager and the SAP Service Marketplace
    Solution Manager system and Solution Manager Diagnostics
    Cf: Solution Manager IMG (transaction SPRO).
    checked the availability of the tools required for the SAP Service sessions (add-on ST-A/PI), with the report RTCCTOOL.
    activated Alert Monitoring and set-up the Automatic Session Manager (ASM) in the Service Data Control Center (SDCCN) of your satellite systems, for all SAP satellite systems and the central SAP Solution Manager of your solution
    set-up your systems in a solution landscape in the SAP Solution Manager
    configured Solution Manager Diagnostics
    2.System Monitoring
    The system monitoring in the SAP Solution Manager is, as described above, like a system-wide central CCMS. It can also contain the central CCMS (CEN) of satellite systems. These CENs can then monitor other components.
    The graphical display in the SAP Solution Manager gives you access to the alerts of all systems in a solution. You can go to the local or central CCMS of the satellite systems.
    The system proposes the most important alerts in the CCMS monitor collection, according to SAP experience, and their alert thresholds, for each system in the solution, in the system monitoring Session. You can activate or deactivate these alerts. The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager, overwriting the values in the local CCMS.
    3.Central System Administration
    You activate the customizing for business processes in your solution, in the Business Process MONITORING session in the SAP Solution Manager. A monitoring tree element (MTE), or a monitor collection, u201EBPMu201C of several monitoring objects, is created in the local or central (CEN) CCMS of the satellite system.
    The data is collected for the monitoring types of the business process monitoring in contrast to system monitoring, as follows:
    ● The system collects performance (dialog transactions), posting cancellations (V1 and V2) and u201EOther CCMSu201C and interface data, in the local CCMS of the satellite systems.
    ● The system collects background processing, application list, application monitors, delivery lists, and document size data, in the central SAP Solution Manager CCMS.
    The SAP Solution Manager system copies the data from the local CCMS.
    The graphical display in the SAP Solution Manager simplifies access to the alerts for the business processes, business process steps or the interfaces between the systems in a solution. You can go to the local CCMS of the satellite systems.
    The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager. These overwrite the values in the local CCMS.
    4.Business Process Monitoring
    The system and business process monitoring (including interface monitoring) in the SAP Solution Manager, both use the Computing Center Management System (CCMS) (transaction RZ20) architecture. This means that system alerts which occur in the local CCMS, are passed to the SAP Solution Manager via RFC connections between the SAP Solution Manager and the satellites. The system shows these alerts in a graphic or in Sessions. You can also handle the alerts centrally, without having to go to the local CCMS of the satellite systems.
    You can see the alerts from several systems in a solution landscape in the SAP Solution Manager, in a graphical overview, in contrast to the local CCMS of the SAP Solution Manager satellite systems. This is the view of a central CCMS (CEN). You can also monitor non-SAP systems in a central CCMS (CEN) of a satellite system
    5.Service Level reporting
    http://service.sap.com/solutionmanager for all solman tasks as given below.
    http://www.asap.net.cn/homepage_en/Solution%20Manager%20EN.pdf
    http://help.sap.com/saphelp_sm32/helpdata/en/1b/f02c41ab78f66fe10000000a1550b0/content.htm
    http://help.sap.com/saphelp_sm32/helpdata/en/9f/1f46570f8a4a268b3154e0e0f07280/content.htm
    Regards,
    Srini Nookala

  • Developement overview / monitoring in Solution Manager

    Hello all,
    I'm novice in Solution Manager and I don't know if my requirements are feasible.
    I created a structure in SolMan, I found out how to uploaded "development specification" into Proj.documentation tab. Even the statuses for documents are OK.
    What I'd like to do now is to use SOLAR02->Development tab to create "one dummy line" exactly for one development specification.
    I don't want to use connection to ECC backend system so I need to define new "object type" and configured in different way (e.g. like the BMDD obj.type but with different behavior). In that line I'd like to keep the track about the development progress with using special statuses.
    Only thing is, where am I supposed to define new "object type" .. or if my idea is able to be done in Solution Manager at all.
    Thanks for any comments, reward points for everyone.
    Tom

    >
    Kamal Kumar wrote:
    > Hi Expert ,
    >
    > Is it possible to monitor the LDAP Server in Solution Manager.
    > If yes then how should i proceed
    >
    > Regards,
    > Kamal
    Hi Kamal,
    The monitoring setup for non-SAP software is actually not done on the solution manager system itself. The solution manager gets its feed of alert information from the satellite systems... specifically from CCMS.
    For SAP systems, alerts from CCMS are activated and set up by default for the SAP environment. For third-party systems you have to be able to set up the interface to feed monitoring information from your non-SAP software to SAP's CCMS infrastructure.
    You can get some information on CCMS agents via the website at http:
    service.sap.com\monitoring. Go to 'System Monitoring and Alert Management' -> 'Monitoring in Detail'
    I hope this information helps.
    Regards
    Amit

Maybe you are looking for