Daily monitoring tcode for PI system

Dear All
Please tell me daily monitoring Tcode for PI7.0 system
Regards
Jitendra Singh

Hi Jithendra,
Basic tcodes like SMQ1,SMQ2,SM59,SM50...ECC side all normal tcodes..Above tcodes are for PI consultants.
Take a look at it
Complete List of SAP Basis TCode - Basis Corner - SCN Wiki
Hope it helps.
Regards,
Kannan

Similar Messages

RCA:Database Monitoring error for SAP Systems on OS/4000 with DB4

Hello Experts,
We are trying to add ECC systems in DATABASE monitoring(DBACOCKPIT) in RCA workcenter of solman 7.0 ehp1 sp26, the DBSID of the systems are shown as *LOCAL.hence the system is not getting added .This is the case only for system on OS/400 and DB4.
The DBSID in RCA is fetched from SMSY-Which is fetched from SLD->The data supplier in ECC pushing the data to SLD
The DBSID in System(Menu)-Status is showing as LOCAL, hence this DBSID(LOCAL) is reported in SLD->SMSY
any pointers on this?

Hi Nilesh,
Please have a look into below SAP note
1887354 *
[ODBC SQL Server Driver] Associated statement is not prepared
Hope this helps.
Regards,
Deepak Kori

System Monitoring (Availability of satellite systems)

Hi!
I would like to set up System monitoring in SAP Solution Manager.
First of all the availibility of SAP systems is of great interest for me.
How can I create and add the monitoring context for the systems in tcode RZ20?
Is some suitable documentation for my question?
Thank you very much
Philip

Hi,
the relevant documentation can be found under item "Availability Monitoring with CCMSPING" at
<Monitoring Availability> [original link is broken]
Best Regards, Vital

Is cutomization possible in NWA for having Daily Monitoring?

Hi All,
I'm working on NWA Administration & Monitoring stuff & need to know, wether customization is possible in it, by which i can have Daily monitoring stuff going in it by way of Common Tcodes like SM21, ST22 etc? I know this can be done in EP, but can i get this developed in NWA too?
Waiting eagerly for reply.

hi,
I think you can use JSF
cheers
Trajano

CCMS alert monitoring data for ORACLE is not visible in Central system

Hello,
I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
Thanks,
Vinod Meno

Bhudev,
Thanks for the quick respose..
1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
Regards,
Vinod Menon

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

Regarding authorization in solution manager for Central system monitoring

Hi,
I want to Prevent users from deleting Task logs in central system monitoring
in solution manager
I have assigned the roles SAP_SV_SOLUTION_MANAGER_DISP
But it gives display authorization for everything unable to keep track of
changes in monitoring
Can anyone please help me to prevent users from deleting task log history
Since I have to keep track of one month data
What can be the suitable role for it ? or what authorization objects i should
make a change to prevent deleting tasklog.
Kindly help me in this regard
Regards
Sanjeev.S

Thanks for your prompt reply
I am not saying about SDDCN
In transction solution_manager => opertation set up = > central system
administation
we will do manual monitoring for sattelite systems in this path. what we monitored
will be entered in task log history.
So what can be the suitable role to prevent the deleting of the task log history.
There is option delete task history. if any one by mistake clicked on that ,all the
records of monitoring will be lost.
so kindly suggest me a suitable solution

BW Monitor error Could not find code page for receiving system

Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
Srinivas

The log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

System monitoring setup for j2ee

Hello,
I am seeting up system monitoring in my solution manager7.0 for XI systems. I am able to configure abap engine but not j2ee. whenver i clicked on active check mark for dispatcher and server hearbeat it is turning to red colour where as user defined alert i am able to configure. When i click on dispatcher heart beat and try to open properties it is telling you cann ot maintain properties. Could someone guide me to setup system monitoring for j2ee.
Thanks,
Kiran.

Check
http://service.sap.com/diagnostics
Did you set up the SMD agent on your XI system?
Markus

Rule based monitors (RZ20) - Show system availability for selected systems

Hi experts,
I'm new with CCMS monitoring and need an advice for rule based monitors.
I want to create three alert monitors (RZ20). One for our developing systems, one for our quality assurance systems and one to monitor our production systems.
For the start, I want to show data in each of this monitor for free space of the filesytems (MTE class: "FilesystemFreeSpace"), for users which are locked out (MTE class "R3SyslogSecurity") and for the availabilty of the ABAP systems (MTE class "Availability_SysPercent_ABAP").
I started to create the monitor for our developing system and got a problem. I started with the rule "CCMS_DEFINE_R3_SYSTEMS" to select our developing systems "HRT", "CRT" and so on. Under this nodes, I defined the mte classes ("CCMS_GET_MTE_BY_CLASS") which needs to be shown: "FilesystemFreeSpace", "R3SyslogSecurity" and "Availability_SysPercent_ABAP".
When I checked the results, I was able to see the free space of the filesystems and whether a user has been locked out. Unfortunately, I recognized that the availability is not shown. Instead there is the message "No MTEs currently available".
I'm aware, the availability cannot be shown on this way, since the agents are part of the central monitoring system and hence i need to choose the central system for "CCMS_DEFINE_R3_SYSTEMS". However I'd like to show the availability separated for each system under "HRT", "CRT" and so on. That means for example, there should me a node "HRT", which contains the free space of the filesystems, whether users are locked out, and the availability for the system.
It's not a problem to get a solution with a static monitor. I simply create a virtual node "HRT" and tick the checkbox under "<central system>, ..., <availability>, <hrt> ..."
However, I'd like to use rule based monitor to keep the effort at a minimum by not ticking thousand of check-boxes when I expand the monitored objects.
I also tried to use the rule "CCMS_GET_AVAILABILITY_FOR_SYSTEM", but it doesn't work and SAP documentations say "This rule is reserved by SAP for later use".
Does anybody know a solution for my problem?
In addition, I've got one more question concerning rule based monitors: If I want to create a monitor for my developing systems, I'll not be able to choose "<all>" for "CCMS_DEFINE_R3_SYSTEMS". Do I need to create "CCMS_DEFINE_R3_SYSTEMS" for each system separately? Or is there another possible way?
Thanks for your help in advance.
Bob
Edited by: Bob Norwich on Oct 17, 2010 12:04 PM
I read something about logical MTE classes: http://help.sap.com/saphelp_nw04s/helpdata/en/31/5462405c910272e10000000a155106/frameset.htm --> Does I need to use this?

Sorry Sean for my very late anwser.
I was very busy in my company.
Yes, I had tried you suggestion but it didn't work for me.
The problem is, that the Agent "CCMSPING" is part of the central monitoring system by definition.
Furthermore I tried to copy the default availabiliy monitor to look how it is definied. It didn't help.
I made the decision to define my monitor differently (an extra monitor for the availability for all system) and replace this temporalily solution when ""CCMS_GET_AVAILABILITY_FOR_SYSTEM" will be available.
The situation is not so bad after all.
Thx for your help. I appreciate it!!
Bob

End to End Monitoring confiuguration for 3rd party systems

Hi,
I have been trying to racking up materials for end-end configurations for 3rd party systems and can't find any..All the ABAP systems are perfectly configured in our End-End Monitoring system but can't find any of the third party systems..Is there a seperate method to configure 3rd party systems?
-Teresa

Hi Teresa,
You can't include 'Third Party' systems in end-to-end monitoring. We had raised a SAP note for the same and below is SAP response..
"End-to-end monitoring stands for the functionality included as of 6.40 that enables you to track XI messages accross several systems. This functionality can be configured for all components that are able
to contribute information to this process monitoring, i.e. only SAP systems can be configuered."
Also check this from online help..
"The Runtime Workbench receives the data for end-to-end monitoring from the Process Monitoring Infrastructure (PMI), which is an SAP monitoring tool for monitoring end-to-end technical processes involving multiple SAP components."
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
Regards
Anand

SCEP 2012 System Center Monitoring Pack for Linux v4.5.10.1 Problem

Hi Everyone!
We are having a problem with OpsMgr 2012 R2 and the System Center Monitoring Pack for SCEP 2012 for Linux v4.5.10.1. We have successfully deployed the Linux OpsMgr 2012 R2 agent to our test CentOS 6.5 VM as well as SCEP 2012 v4.5.10.1. We have
imported the System Center Monitoring Pack for SCEP 2012 for Linux management packs into OpsMgr 2012 R2 which is successfully discovering SCEP on our Linux VM, but when looking at the details for the monitor, it indicates that SCEP is "not found"
as seen in the following screen shot...
As seen in the following screen shots, everything else seems to be installed, configured, and working properly...
Any assistance or guidance would be greatly appreciated!
Regards,
JJ

Magnus_001 (big ups) and I were able to get discovery to stop failing on the Linux side of things, but the SCOM MP is still highly problematic. Their pdf guides for SCEP implementation on Linux has a bunch of typos and errors -- for example, listing
'/bin/sh' instead of '/bin/bash', and one of the lines (the one that includes "export LANG=C" won't run no matter what. When we disassembled the SCOM MP, we found that there's an extraneous space at the end of the command, current thought is
that that's causing a regex to fail within sudo. All of their commands, from what I can tell, need to be specified as NOPASSWD within sudo; if you see errors about ssh-askpass with that you can confirm that there are likely typos in their guide sourced
from the pdf. We eventually allowed '/bin/bash' to get the programs to run since we couldn't get a regex match to catch their command (which should be in a script). We are out of failures that we can discover with logging on the Linux side; it's
likely to be an error within the MP at this point.
When we look at the powershell script in the MP library, the "not found" error is the default state, set immediately after stdout is captured from the discovery script. I'm guessing that there's some problem interaction between that script
and the parsing thereof, as when we run the script locally as root we see the output that we'd expect. For all I know that's a line ending or locale problem.
Troubleshooting on the linux end is problematic, as instead of distributing a script to check on the linux side (which makes the sudo part of things much easier), the script is hard-coded within the MP. From what I understand it would need to be disassembled
and recompiled to change.
The snippet below may be of use to someone for use in their sudoers file, it will make the checks work on the linux side at least. I wouldn't recommend this for anything beyond testing, as specifying that an account can run a full bash shell as root
without a password is a terrible idea.
#replace scomactionaccount with whatever your scom action account is called
User_Alias SCOM = scomactionaccount
Runas_Alias SCOM = root
SCOM ALL = (SCOM) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
SCOM ALL = (SCOM) NOPASSWD: /bin/bash

System monitoring templates for SP11

Dear colleagues,
could anyone please to share system monitoring templates for SP11 like as http://wiki.scn.sap.com/wiki/display/TechOps/SysMon_SupportedProducts?
Thanks a lot,
Alexander

Dear Roland,
Is it possible to get it for documentation purposes in any way now? For example, export it out of the existing system.
With best regards,
Alexander

Tcode for deleting source systems

Dear all,
is there any tcode for deleting source systems in BI 7.0? I tried RSAP_BIW_DISCONNECT and RSAR_LOGICAL_SYSTEM_DELETE, but these two didn't exist in BI 7.0. Please help. Thanks.
Jin Ming

hi,
chk the below link
How to delete source systems?
Ramesh

Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2

I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0

Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!!

Daily monitoring tcode for PI system

Similar Messages

Maybe you are looking for