DAILY rate using X013
Hi,
In person related valuation bases, when i run the payroll for an employee in simulation mode using PCR X013 i am getting output (amount) in HOURLY rate basis.
To get the same output in DAILY rate basis, what changes/config do i have to make? Plz suggest....thanks
Rgds
Dixit
PCR related with :
1. employee subgroup groupings set up in your system and
2. wagetypes.
example of the employee subgroup groupings:
- hourly wage earner
- period wage earner
- salaried employee
to set up daily-rate-basis you need to do setting related with those two things.
Similar Messages
-
how is the status_code in gl_daily_rates set in front end of the oracle application.
The status_code has values 'c' and 'o'.
Regards
sudharshanHello.
Status_code 'C' indicates that the daily rate is not used by any set of books that has
average-balances enabled.
Status_code 'O' indicates that the daily rate is used by at least one set of books that
has average-balances enabled.
Status_code 'D' indicates that the rate is to be deleted.
Hope this helps.
Octavio -
Help with GL Daily Rates download from website in to Excel
Hi all,
I have a requirement wherein I need to create a concurrent program that will update the daily rates table in GL. The rates need to be pulled from www. oanda.com
If anybody has any experience in updating the daily rates table automatically would appreciate if that is shared.
Here the problem that I have is that we are planning to get daily rates from oanda.com So I am looking for some method to get data from site and upload interface table
automatically. We can also receive daily csv files from them mailed at our inbox, but then not getting any clue as to how can we automatically FTP the file to unix box
so that we can then use that file to insert records into interface table. Any kind of response is welcome and appreciated.
ThanksDuplicate - GL Daily Rates download from Oanda.com
-
What is the significance of gl daily rates interface
Hi,
What is the use of gl daily rates interfaceHi,
This is one of the interfaces in GL which uses to transfer daily rates data from feeder system into Oracle database table GL_DAILY_RATES
concurrent program: "Program-Daily Rates Import and Calculation"
Interface table: GL_DAILY_RATES_INTERFACE -
Schedule a daily job using JOB_CLOSE
Hello,
I want to schedule a daily job using job_open, job_submit & job_close.
This job should run everyday at 22:00 hrs.
What are the parameters I need to set for the FM JOB_CLOSE?
Thanks,
A PothuneediLook at this sample provided by SAP : <a href="http://help.sap.com/saphelp_sm32/helpdata/en/fa/096d8e543b11d1898e0000e8322d00/content.htm">Sample Program: Start-Time Window with JOB_CLOSE</a>
Sample Program: Start-Time Window with JOB_CLOSE Locate the document in its SAP
<b>Library structure</b>
* Submit job: start-time window defined, with periodic repeat and
* with target system upon which the job is to run.
* In this case, you must provide start date settings. You can
* have the job started immediately with a JOB_CLOSE parameter,
* set the start date yourself, or ask the user with
* BP_START_DATE_EDITOR.
* Example: Provide start-date specifications yourself.
STARTDATE = '19970101'.
STARTTIME = '160000'.
LASTSTARTDATE = '19970101'.
LASTSTARTTIME = '180000'.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = JOBNUMBER " Job identification: number
JOBNAME = JOBNAME " and name.
SDLSTRTDT = STARTDATE " Start of start-time...
SDLSTRTTM = STARTTIME " window
LASTSTRTDT = LASTSTARTDATE " Optional: end of...
LASTSTRTTM = LASTSTARTTIME " start-time window
PRDMONTHS = '1' " Restart at intervals of
PRDWEEKS = '1' " the sum of the PRD*
PRDDAYS = '1' " parameters
PRDHOURS = '1'
PRDMINS = '1'
STARTDATE_RESTRICTION = BTC_DONT_PROCESS_ON_HOLIDAY
" Restrict job start to work
" days; don't start job if
" scheduled on holiday.
" Other values:
" BTC_PROCESS_BEFORE_HOLIDAY
" BTC_PROCESS_AFTER_HOLIDAY
CALENDAR_ID = '01' " ID of R/3 factory calendar
" for determining workdays
TARGETSYSTEM = 'hs0011' " Optional: name of the host
" system on which the job is
" to run. Set only if
" absolutely required.
" Example: A required tape
" drive is accessible only
" from a single host system.
IMPORTING
JOB_WAS_RELEASED = JOB_RELEASED " If user has authorization
" to release jobs to run, job
" is automatically released
" when it is scheduled. This
" field is set to 'x' if the
" job has been released.
" Otherwise, the job is sche-
" duled but must be released
" by an administrator before
" it can be started.
EXCEPTIONS
INVALID_STARTDATE = 01
JOBNAME_MISSING = 02
JOB_CLOSE_FAILED = 03
JOB_NOSTEPS = 04
JOB_NOTEX = 05
LOCK_FAILED = 06
OTHERS = 99.
IF SY-SUBRC > 0.
<Error processing>
ENDIF.
Regards -
HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisitionHi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments -
Daily wages - some emp are paid on daily rates.
daily wages - some emp are paid on daily rates.
Suppose a emp salary is 200 per day .
His salary break up for 200 rs.-
Basic 100 rs
HRA 50 rs
Convyance 50 rs
How IT 08 maintain daily wages rates
he worked 26 days and getting 200*26 =5200 in month.
If he works 22 days in a day salary is 22*200=4400.he worked 26 days and getting 200*26 =5200 in month.
If he works 22 days in a day salary is 22*200=4400.
He worked for 26 days that means Payroll days so, you can map PRCL 2 for the wage types which u are maintaing in IT0008 which talks abt Payroll days
If he works 22 days in a day salary is 22*200=4400.
here 22 days out 26 the rest 4 days he must be absece right can u please let us know that -
Incorrect Exchange rate used for return deliveries
Hello Friends I have following problem can someone please help
Germany has produced a return document for a delivery in the month of April. The document type WL (GR) has been used for this. The customizing is set up for this document type to use the exchange rate type P. Anyhow, the system has used this x-rate type for the entry on the account 5000000 but the account 5500000 was translated with a different x-rate. After investigating we found out that the x-rate used is the ZPLN rate which was due on document day plus one (13th of April). As a result the account clearing with the transaction F.13 did not work. Additionally a PPV (exchange rate related) has been booked to bring the journal to zero were no PPV should have been booked.
After my research i found Return was done for 7 pc u2013 based on different exchange rate than goods receipt (exchange rate type P) u2013 now we are not able to clear this documents (using F.13) becouse amounts are not balanced.
Could someone Please help.and provide details what i need to do fix this
Regards
Vishalcan someone please help
-
Unable to update wip resource usage rate using wip_txn_interface
Hello All,
I am unable to update wip resource usage rate using wip_txn_interface.
The rows were processed in the interface table and Cost Manager also completed normal, but the rows were not updated.
Can you please help?
Thanks,
GaniHI Gani,
Is that stuck with any error?, please provide the error message if possible.
Thanks,
Raghav -
15% * daily rate
How do i do for Valuation Base
for WT : Night Differential 15%Rule X010 : gross pay is calculated by the wage /001
Rule X015: it looks for V_512w_b and if the val basis is 01 and Stmt wage type is /001 and the percentage is 15%. then 15% of the value (total pay) will be multipliled with no. of hrs displayed against the wage type. -
How can i schedule jobs daily by using fm's
hi all,
am using open job ,submit job,close job fm's to schedule back ground jobs,
want to schedule it daily which parameter i need to pass in close_job for daily job schedulingyou can get the clear documentation by using ABAPDOCU transaction.
Regards
Mani. -
Diff. Exchange Rates used in Diff. Scenarios(Import/Export/Other)
Suppose maintained following Rates against USD in OB08 -
B (Bank Selling Rate) - 46
M (Avg. Rate) - 45
G (Bank Buying Rate) -44
Which Exchange Rate Types are used in case of following -
In case of Import -
In PO
In GRN
In MIRO
In Case of Export -
In SO
In Billing Document
In Sales Accounting Document
In Excise Accounting Document
Also in case of following -
At the time of Receipt
At the time of Payment
At the time of Revaluation of Open Items of Customer
At the time of Revaluation of Open Items of Vendor
At the time of Clearing of Advance against Vendor Invoice in F-44
Please guide in this regard...
Thanks & Regards...
AmeyaHi,
The default for all of these is Rate M.
Via Customising it is possible in most cases to use a different rate.
Kind regards -
My Photo website host (SmugMug) converts uploaded video files at a specific Data Rate in Mbps before installing them. I would like to compress my slideshow video file to the same rate before I upload it to reduce file size and upload time. When I choose the "Custom" setting for an Export, I can choose 1 of the 5 Quality choices and see the estimated file size. But, I cannot know what the actual Data Rate is until after I wait a long time to export the slideshow (hours for a long slideshow) and then examine the resulting file in QuickTime Player's Inspector.
I ran a few tests using a short slideshow (16 images, 1:23 mins/secs) at 1,728 x 1,080 resolution to find out the bit rates for various quality level choices.
Export setting Quality Resulting bit rate File Size
HD 1080p default 20.68 Mbps 214.8 MBytes
Custom Best 20.49 212.8
Custom High 6.25 65.0
Custom Medium 3.97 41.3
However, I don't know if those bit rates will be the same for different length slideshows or for different output resolutions. My SmugMug host site uses an 8.0 Mbps rate for a 1728 x 1080 video file. If I choose Custom/Best, my file will be almost 3 times bigger and much higher quality than necessary, but if I choose Custom/High, my file will be smaller and lower quality than SmugMug's converted version.
I have installed MPEG StreamClip that will let me convert an exported Aperture slideshow video file, and StreamClip allows me to choose a specific bit rate in Mbps. But, I would prefer not having to do a 2 step process (Export from Aperture, then convert in StreamClip). -
How to determine the accuracy of the frame rate using a Basler sca640-70gm?
To whom it may concern
I am guessing that the time between each frame varies from a nominal set frame rate.
How do I set that nominal frame rate?
How do I determine what the actual (frame by frame) frame rate or time between frames was in post pressing of the "video" image.
Thank you,
Todd
Solved!
Go to Solution.It is almost impossible to measure the frame rate accurately by measuring the time between consecutive frames. The latency of sending the images over the ethernet means they won't arrive at the computer with the same exact spacing they were taken at. Also, measuring the length of one short interval in LabVIEW is also very difficult. Windows latencies and other issues could make your measurement be off by quite a bit.
The only way I can see to verify the frame rate is to use a digital input into a counter and wire the shutter signal directly from the camera into the digital input. You could program the counter to measure between the rising edges of the shutter signal, and you would find out the frame rate is indeed very accurate and repeatable.
The only other way I know to accurately measure the frame rate in LabVIEW is to measure the time over a large number of frames (thousands) and divide the number of frames by the total time. Any minor errors in measuring the timing of a single frame go away with the large number of frames.
Bruce
Bruce Ammons
Ammons Engineering -
User Exit / Enhancement Point to set exchange rate using GR date in MIRO
Dear experts,
I'm trying to set exchange rate not as default but using GR date (When I input the PO number and click enter, the exchange rate should be set). So when system set the exchange rate, it will use the PO date, not GR date.
What user exit / enhancement point / BADI should I use?
I've already tried all user exit and BADI for MIRO but still not succeed. Is there anyone who could help me?
Thank you very much..
Regards,
ShirleyHi,
So as to capture Exchange Rate w.r.t PO date, it is suggested to go for Development/Enhancement with required import purchasing doc types in it. While doing GR and before posting the document you need to capture the Exch Rate as per PO date and replace with GR date Exch rate present in it through development.
Regards,
Maybe you are looking for
-
iTunes coredumped in the middle of syncing my Outlook calendar and left my Calendar named "_ModCal74cb._ModCal3cfb.Calendar" (yes this has happened twice). Does anyone know a way to get back to the correct, original calendar name without losing all m
-
World of Warcraft: Cataclysm CE Preorder
Greetings unto both the Alliance and the Horde, It has crossed my desk as I have been diligently typing responses to the many customer concerns I am a steward of that we weren't able to meet demand for some of our preorders that were requested to shi
-
How to create logical link for report and make that available in webui
Hi All, Please mention the steps to creae logical link for standard report(BI) or customized report and assiging it to work center, Thanks, priya
-
Why is my MacMini 6.1 always so high in Memory Used?
Hi, I was wondering if anyone could help me figure out why my MacMini keeps running slowly... I think it's to do with Memory Used, but I'm only guessing. Thanks. EtreCheck version: 2.0.11 (98) Report generated 6 November 2014 10:39:57 pm AEDT Hardwar
-
Just bought a new 60Gig.I have Nero Recode 2. It will convert DVD to MPEG-4 and it will play with Nero software. When I import to iTunes it is pixelated and audio and video are not in sync. Sorry if this has already been answered I went back and look