Daily report for system

hi,
   Actually we are configured SAPRouter and maintain service connection for all system in landscape.
   Do we need prepare any daily system report through solution manager.
   Plz suggest me
Manoj

You need to configure Solution Monitoring specially System Administration you can define the task that the administrators need to execute, a responsible for each one time to so it etc, at the end you can generate a report of this.
Review following link http://help.sap.com/saphelp_nw04s/helpdata/en/cb/df8a3eacd49076e10000000a114084/frameset.htm

Similar Messages

Does anyone have a daily report for system status?

Basically, I am looking for an automated daily report to give me the status of jobs and workflows. I am having a hard time finding the talbes and relationships for all the jobs, workflows, and tasks in the CMDB.
Once I know where to find all the pieces, I can take it from there.

Sounds like a job for OpsMgr.
- Get on the floor, do that dinosaur

How to create a daily report for sales order

hi
how to create a daily report for sales order. what fields it must consists of. what are the tables it need?

Hi
You have to use the sales order tables VBAK,VBAP and VBEP
So keep date field on selection screen
and treat this date as Order creation data audat field in VBAK.
based on this fetch the data from VBAK and VBAP with the following fields like
VBELN, KUNNR,NETWR,POSNR, MATNR,ARKTX,KWMENG,WAERS etc and display in the report
<b>Reward points for useful Answers</b>
Regards
Anji

Daily report for user sessions in oracle10g database

I would like to genarate the daily report for user sessions in oracle10g database
daily report of how many of sessions present in oracle database for each user

Thanks for link ( I know you always post the oracle document link here)
But I am expecting scripts( someting like logon trigger and logg off trigger) to genarate the user session report.

LMS 4.2.4 - Creating daily report for checking mac-adress list (IP hone) existing on the network

Hi,
we would like to create a daily report for checking (by user-tracking function) mac-address list on the network.
I try to use “report designer” on “report” dashboard without any success. Could you help us to provide or create a method for applying a report job every day for checking our mac-address list
Thanks in advance.

you can do the following
1. -create a quick report {Reports > Inventory > User Tracking > Quick Report}
2.export the last report which I suggested and filter the MAC address you are interested in
3. you can create a Custom report {Reports > Report Designer > User Tracking > Custom Reports } as per your need.
Thanks-
Afroz
*** Ratings Encourages Contributors ****

How we can get report for system shutdown for perticular year.

Dear Friend,
How we can get report for system shutdown for perticular year.
i.e. i want to know at what time and what date system has been shutdown for ther of 2006.
Thanks,
Sachin

Dear Sir,
Thanks,
But from system log file SM21 i have got only the time not date on which it has been shutdown and restart.
And another thing is that 15 dats before Log file data is atomatically deleted, so cant get it back.
Can you provide me is any another solution? i.e by heating perticular T code report come>
Sachin

Daily Report for e-mail alerts sent to via subscription

Hi All,
Good Day!!!,
We have multiple subscription in SCOM 2012 SP1.
we need to generate a daily report stating that this many Alert sent to this subscriber group and this many are closed .
Ex: We have [email protected] is the subscriber and for this subscriber we have created 3 subscription for send notifications.
In a native mode we can able to export alerts details by group or objects. but we need a report based on subscription.
Thanks in advance.
Thanks & Regards, Kesa_Kara

Hi,
Please refer to the links below:
OpsMgr 2012: Configure notifications
http://blogs.technet.com/b/kevinholman/archive/2012/04/28/opsmgr-2012-configure-notifications.aspx
Best Practices: E-mail Notification Subscriptions
http://www.opsconfig.com/?p=574
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Reporting for System Center End point Protection -Antivirus Infections,Signature updates,Errors/failures

Hi,
We have SCEP on all servers 2008 R2 and 2012, now basically we are loking for specific information on
infections
Signature Updates
Errors/Failures.
Regards,
gautham.K
MCTS-Microsoft Exchange Adminstrator,2010

The Antimalware activity report cover your 1 request.
The Computer Endpoint Protection status covers the other two request, it is a drill through for the other reports and it is within a hidden folder.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

About daily report for only one resource

hi
I had many resources as target resource but scenario is when user are provisioned from OIM to AD at the end of the day i need report of only AD the form of flat file or csv file..
regards
Avinash

hi Avinash,
Please check this link: http://docs.oracle.com/cd/E23943_01/doc.1111/e14309/refsched.htm
What they've explained above is: 1- You can create a java class with Schedule tasks reqs and this java class can create(add and append) results related of your OIM environment.
1.1- http://docs.oracle.com/cd/E14571_01/apirefs.1111/e17334/allclasses-noframe.html
2- If you are no familiar or have difficult with the first step. Use BIPublisher: http://docs.oracle.com/cd/E14571_01/doc.1111/e14309/understanding.htm#LLBFHHPQ
I hope this helps,
Thiago Leoncio.

Itunes u public - How to get daily report

Hello,
does anybody have any suggestion about how to get daily report for iTunes U public site ?
The only information I've found is in iTunes U Administration Guide for Private Site with the following example
http://deimos.apple.com/WebObjects/Core.woa/API/GetDailyReportLogs/example.edu? StartDate=2007-09-12&EndDate=2007-09-13 &credentials=Administrator@urn:mace:itunesu.com:sites:example.edu &identity=%22Jane+Doe%22+%3Cjdoe%40example.edu%3E+%28jdoe%29+%5B42%5D &signature=38bda70d9aa6975ae8756754034feb6e3c794aca4b21665f6dc85d2ed42d4f6b
but I do not understand how I can apply that for a public site.
How to get "credentials" ? What baout identity and signature? What I've is just my iTunes U Site Manger account name and pssword.
Any help is very appreciated.
Kind Regards,
Diego

Find the solution by myself.
There are two iTunes U sites with different credentials: one is the original iTunes U Public before first activation and another created automatically by the activation process. The last is the actual iTunes U Public site
managed by iTunes U Public Site Manger. The difference is the domain name of the site: if I sign in using my domain name with "-dz" added at the the end, I can access the actual credentials (Site URL, Debug Suffix, Shared Secret, Administrator Credentials) that differs completely by the ones of the original iTunes site.
No where I found information about that, neither I've received any notification mail about the domain name change after the site activation process.
Hope that can help.

POS system reports daily totals for each store, not for each cashier

Hi!
We are implementing SAP Retail (ERP 6.0 EHP4 stack 3), SAP PI (Netweaver PI 7.1 SP 8) and SAP BW (NetWeaver 7.0 ehp1 stack 4, incl BI content 704, SP 3 ) for a client. Their POS system is a 3rd party system, i.e. not SAP POS.
This issue concerns the fact that the POS system reports daily totals for each store, not for each cashier.
At my client, the daily settlements are done for each cashier. At the end of day, we will get cash drawers counted with sum of each tender (cash and checks) at the end of day. In addition, the POS system will send sum of each tender, sum of all sales and sum of different finance transactions made each day. However, this u201Ctotals messageu201D is not sent separately for each workstation, or for each cashier, but rather for each store. So we only gets the totals per store.
Questions:
i)     Are the tasks available for comparing totals to the aggregates for POS transaction able to handle u201Cstore-only figuresu201D?
ii)     If not, how can we adapt the tasks so they can handle u201Cstore-only figuresu201D?
iii)     Can we trigger outbound tasks sending WPUUMS and WPUTAB using outbound dispatcher automatically, or must we run this as a manual task of an employee, after checking that all stores have delivered their totals?
iv)     The u201Cstore-only figuresu201D does not include cashier statistics. Do we need the u201Ccashier statisticsu201D as total figures, or can we just populate the BAPI for each POS transaction with data, in order to populate BW infocubes for cashier statistics?
Thanks for any advice !
Best regards,
Oeystein Emhjellen

Hi Kees ...
Your profile indicates you are running Leopard v10.5.8
You need to upgrade to Snow Leopard V10.6 in order to use the App Store. This is an "upgrade", not an "update".
Make sure your Mac meets Snow Leopard's requirements here.
You must have the minimum of v10.6.6 installed in order to access the App Store.
You can purchase Snow Leopard here > Mac OS X 10.6 Snow Leopard - Apple Store

No data for daily report sent from my PC

Since a clean install of Windows 7 Ultimate on my PC, no data is being sent to the Cisco server from my PC. Previously I was running the RC version of Windows 7 Ultimate on this PC, with the same router and configuration, and no problems in being able to access a full daily report. I was using Outpost Security Suite Pro, which allowed the data to be sent, but am now using the native Windows firewall, configured to allow NM outward communications.
I asked Support to assist with configuring the Windows firewall, but they were unable to assist, as they did not know how to do this- I would have thought that as NM is Windows 7-compatible, this information would have been available to them.
My netbook is running Windows 7 Ultimate RC, with OUtpost Security Suite Pro, and does send the data for the daily report, when using my home wireless network and the same router, so I suspect that the Windows 7 firewall is causing the problem with the PC.
Can anyone advise me on the specifics of configuring the Windows 7 firewall to allow NM to send the necessary data so that I can get the daily report?
Running Network Magic version -5.5..9195.0-Pure. ADSL-2 connection; Netcomm Router NB6Plus4W;PC connection to router wired; PCI Adaptor card; VIPRE Antivirus and Antispware (disabling this made no difference)

ambergris77 wrote:
Since a clean install of Windows 7 Ultimate on my PC, no data is being sent to the Cisco server from my PC. Previously I was running the RC version of Windows 7 Ultimate on this PC, with the same router and configuration, and no problems in being able to access a full daily report. I was using Outpost Security Suite Pro, which allowed the data to be sent, but am now using the native Windows firewall, configured to allow NM outward communications.
I asked Support to assist with configuring the Windows firewall, but they were unable to assist, as they did not know how to do this- I would have thought that as NM is Windows 7-compatible, this information would have been available to them.
My netbook is running Windows 7 Ultimate RC, with OUtpost Security Suite Pro, and does send the data for the daily report, when using my home wireless network and the same router, so I suspect that the Windows 7 firewall is causing the problem with the PC.
Can anyone advise me on the specifics of configuring the Windows 7 firewall to allow NM to send the necessary data so that I can get the daily report?
Running Network Magic version -5.5..9195.0-Pure. ADSL-2 connection; Netcomm Router NB6Plus4W;PC connection to router wired; PCI Adaptor card; VIPRE Antivirus and Antispware (disabling this made no difference)
Hi ambergris77,
First only one Software can be turned on within the operating system, otherwise you have problems. Also Network Magic needs Full Access, not just Outward Access.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Report for daily production and daily sales quantities

Can you Please any body let me know what fields and tables should I pick to generate a report for sales qty and production qty for a material on daily basis. we are using PP PI

Hi,
You can use table MSEG for that purpose. Try BUDAT-MKPF as one of the selection parameters and use
MBLNR-MKPF = MBLNR-MSEG
MJHAR-MKPF = MJHAR-MSEG
Sort the results in ERFMG-MSEG and ERFME-MSEG using
BWART-MSEG = 101 minus 102 (for production)
SOBKS-MSEG = E
BWART-MSEG = 601 minus 602 (for sales).
Above stuff might be useful to you for your development requirement provided you are having Sales Order specific production.
Thanks & Regards,
Abu Arbab A

Std, report for Daily receivables

Hi Friends,
AP supervisor of my company would like to see report for Daily Receivables.
Is there any std. sap report that can provide him with this information.
please let me know.

Hi,
When I said develop I meant a custom ABAP report with the help of Developers. You can also try option of developing a ABAP query by using table BSID, but this may be difficult if the requirement is to list multiple days as columns (seven days as seven columns). I am assuming the Customer numbers will be rows in the report.
Thanks
Murali.

MIS report : Daily Cumulative Report for contract in SD module

Hi All,
           Do you have any idea about MIS report in SD module.actually my requirement is that
i have to generate daily cumulative report for contract. that means at time i am selecting ten plants
and correspondingly sum of total quantity,average rate and average weight of all the contracts for particular plant should be displayed in a column and various existing flavours should be displayed in a row.
for above requirement following output format is there:
plant ->           plant1               plant2              plant3 ....   .....
flavour             quantity rate     quantity rate
cumulative
total cumulative
please refer sample code,if any.
Thks & Regards
Shailesh

Hi,
You can ask your functional people what are the required fields to develop a report below are the table.
customer related tables:
KNA1 Customer master General Data
KNB1 Customer Master Co. Code Data
KNKK Customer Master Credit Control Area Data
KNVV Sales Area Data
KNVI Customer Master Tax Indicator
KNVP Partner Function
KNVD Output type
KNVS Customer Master Ship Data
KLPA Customer/Vendor Link
Sales Documents
VBAK Sales Document - Header Data
VBAP Sales Document - Item Data
VBUK Header Status and Administrative Data
VBKD Sales Document - Business Data
VBUP Item Status
VBPA Partners
VBFA Document Flow
VBEP Sales Document Schedule Line
VBBE Sales Requirements: Individual Records
Delivery Document
LIKP Delivery header table
LIPS Delivery item table
Billing document:
VBRK Billing document header table
VBRP Billing Document Item table
Shipping
VEKP Shipping Header Table
VEPO Shipping Item Table
Thanks
VIkranth

Daily report for system

Similar Messages

Maybe you are looking for