Daily Report using Grid Control

Hi guys
I would like to know if there is a way to schedule some daily reports under the Grid Control?
There are some cool reports that I wish to receive automatically in my mailbox everyday.
I don't know how to do that.
Thanks
Brahim DRIHEM

Hi,
It's very simple.
Select your report (with the radio-button) and click Edit.
Go to the schedule tab
Select "Schedule Report"
Select "Repeating" and fill out the details here
select "E-mail report each time the scheduled report completes"
Enter your mail address
Press Ok button.
Hope this helps.

Similar Messages

Performance reports using Grid Control

Hello!
Can we create and schedule database performance reports using oracle 10g grid control?
Thanks.

Hi
Yeah its possible to generate the performance reports using Grid Control.
Ex:
Oracle Enterprise Manager GRID Server contains built in reports to support Database Administrators to generate sightly reports.
First Thing is to click to "Reports" tab on the top, right hand side of the GRID Management Console (figure_grid_management_console). This page is where all the predefined and custom reports can be find. Now click on the "Create" Button on top of the page to create a new custom report. "Create Report Definition" page comes to the screen. There are four tabs for the definition of the report.

Creation of reports from Grid control 12c

Hi All,
I wish to create some reports from Grid Control and push to mail especially looking for Daily Health Check report like Tablespace,Locks,Alertlog file errors,File systems,Archivelog files sync information in to one report.
Thanks in advance.

The native reporting application i.e. Information Publisher does not support such a feature, but in you are using BI Publisher integrated with EM, then BIP allows you to control when to email reports. for example, on completion, on failure, etc ..

Report from Grid Control:Monthly Growth of each database in Single Report

Hi,I want to make the report from Grid Control for Monthly Growth of each Database for Capacity planning
I can See under Report->Storage->Oracle Database Tablespace Monthly Space Usage
But this is only for once database and I want to include all the database in single report that too with limited INfo
Want the format something like..just wanted to make you guys
Database Actual Size on 1st Actual Size on 30th INcrease in Size
1.
2.
Something close to above format will do...
Thanx
Gagan

Hi Thanx for the reply
But Which Tablespace Metric You are talking about?I can See 5-6 Tablespace Metric and infact I dont want the data at the tablespace level and I want the total size of the database and growth in last month as shown in ' Oracle Database Tablespace Monthly Space Usage '.
But Thanx again for the reply
Regards
Gagan

Report from Grid Control:Monthly Growth of Each Database on Single Report

Hi,I want to make the report from Grid Control for Monthly Growth of each Database for Capacity planning
I can See under Report->Storage->Oracle Database Tablespace Monthly Space Usage
But this is only for once database and I want to include all the database in single report that too with limited INfo
Want the format something like..just wanted to make you guys
Database Actual Size on 1st Actual Size on 30th INcrease in Size
1.
2.
Something close to above format will do...
Thanx
Gagan

Hi Thanx for the reply
But Which Tablespace Metric You are talking about?I can See 5-6 Tablespace Metric and infact I dont want the data at the tablespace level and I want the total size of the database and growth in last month as shown in ' Oracle Database Tablespace Monthly Space Usage '.
But Thanx again for the reply
Regards
Gagan

Data Guard Summary problem using Grid Control.

I setup data guard using Grid Control and after completion, the console of the standby database shows: "Unable to determine Data Guard information." under the Data Guard Summary section. The primary database is not showing the standby. I'm using Red Hat Linux Server 5.7 (64bit) and Oracle 10.2.0.5. This is a standalone (no RAC or ASM involved). When I run show configuration, the following comes up:
DGMGRL> SHOW CONFIGURATION;
Configuration
Name: PRODDB_ghph@ora01
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
ghph - Primary database
gsbh - Physical standby database (disabled)
Current status for "PRODDB_ghph@ora01":
SUCCESS
I tried searching online and metalink but nothing. Any help in solving this problem would be appreciated. TIA
Edited by: Gensis2001 on Jan 8, 2013 3:08 PM

Gensis2001 wrote:
Does this make any sense?
SYS@gsbh> SELECT * FROM V$ARCHIVE_GAP;
no rows selected
SYS@gsbh> select process, status, sequence# from v$managed_standby;
PROCESS STATUS SEQUENCE#
ARCH CLOSING 60353
ARCH CLOSING 60352
RFS IDLE 60354
MR(fg) WAIT_FOR_GAP 58673
4 rows selected.Currently standby is waiting for the sequence *58673* but the later on archives of series 60353... are already archived.
Can you confirm that only archive sequence * 58673* is missing or any more? If you have less number of archives are missing then see how the parameters you configured. like FAL_SERVER, LOG_ARCHIVE_CONFIG, LOG_ARCHIVE_DEST_n so on.
Check below command and see any errors with remote destinations
select severity,error_code,to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') "timestamp" , message from v$dataguard_status where dest_id=2;Source: http://www.oracle-ckpt.com/dataguard_troubleshoot_snapper/
If the archives are missing so many and you do not have backup, then certainly you have to choose incremental roll forward to synchronize the primary database, then only you can see the configuration status of Broker as valid. You can refer this article to perform incremental roll forward http://www.oracle-ckpt.com/rman-incremental-backups-to-roll-forward-a-physical-standby-database-2/

How to generate addm report using grid

Hi,
how to generate addm report using grid, please provide any relevant doc/links etc.
Thanks in advance.

how to generate addm report using grid, please provide any relevant doc/links etc.When you start with the wrong question, no matter how good an answer you get, it won't matter very much.
what is best way to divide board into 2 pieces using a hammer?
Edited by: sb92075 on Oct 25, 2010 7:22 AM

Can we schedule Loader Jobs (SQL Loader) using Grid Control ?

Can we schedule SQL Loaders jobs/process using Grid Control for 11g database ?
Or
Is it good to schedule it as external jobs using DBMS_SCHEDULER ?
OS is LINUX. Database is 11g R1 Grid Control will be the latest, I believe 10gR3.
Any other suggestions... (I know it can be done using OS utilities like cron and others but that is not an option for now.)
Thanks in advance.

Try this
-> Create a shell script to execute sqlldr
-> On Grid, create an "OS COMMAND" job and pass this script as parameters. You'll have options to schedule this job.
Let us know how it works.

Remove node using Grid Control

Hi
Can you post some steps removing node from 10gR2 CRS using Grid Control
Have 4 node cluster, and wants to impliment steps this way.
1) First remove instance(s) on node to remove by going "CLUSTER DATABASE(S)"
select SERVER
under "Change Database" select "delete instance" go from there...
2) go CRS page and choose "Monitoring Configuration" and choose and update
I have manual steps.. but wants to try with GC...
Any information is helpful
Thanks,
Krishna.

mrmessin wrote:
I have never gotten Grid Control and database control working for a single database. I have tried. Oracle dbca gives you a choice for Grid Control or database control but not both.
Right, because intuitively it doesn't make much sense (but, as i mentioned, my situation is a bit out of the norm).
But, would there be some sort of error message returned if you did go in and manually start EM? Have you tried to go in and manually start up the dbconsole when GRID control was already running?
I checked the port.ini file and it showed this:
Enterprise Manager Console HTTP Port (SAIN) = 5500
Enterprise Manager Agent Port (SAIN) = 1831
So it's recognized in that file. It seems odd that DBCA would bother to include that if you select instead Grid Control.
Regarding the additional overhead of running both, would it be a big deal to simply turn EM on when I want to use it, then to turn it off so as to eliminate the additional overhead??
Edited by: user10496131 on Oct 30, 2008 8:52 PM

Create data guard using grid control 10gR3?

Has anyone been able to create a data guard of 10g R2 (10.2.0.3 dbs) using Grid Control 10gR3?
My creation stopped on cloning the standby db step. And i had to finish it manually but i'm just wondering if it has worked for anyone else?

One step further. I enabled debug tracing for the agent and noticed that the creation of the windows service causes an error.
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Running oradim to install service for dg2
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Command: D:\oracle\product\10.2.0\db_1\bin\oradim.exe -NEW -SID dg2
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.tempLocFallback(): Test filename: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\test_temp_location.2976
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.removeFile(): To remove file D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\test_temp_location.2976
-: Thu Sep 27 10:14:53 2007: DEBUG: db_common.tempLocFallback(): Tested TEMP location: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/
-: Thu Sep 27 10:14:53 2007: DEBUG: clone_util.runOradim(): Output file: D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\dbclone.2976
-: Thu Sep 27 10:14:53 2007: ERROR: clone_util.runOradim(): D:\oracle\product\10.2.0\db_1\bin\oradim.exe -NEW -SID dg2:
The trace refers to file D:\oracle\product\10.2.0\agent10g/sysman/emd/upload/\dbclone.2976 :
DIM-00019: create service error
O/S-Error: (OS 1057) The account name is invalid or does not exist, or the password is invalid for the account name specified.
Although the other steps complete succesfully (using the same credentials), it fails creating the service. Don't know why, yet...

Physical database creation using Grid Control fail

I have tried several times to create a physical standby using Grid Control. Everytime, the job failed at the step "DBClone -> Destination Preparation". The log file indicated the following error message:
PLS-00553: character set name is not recognized.
When I check the spfile, I find that an extra word "PuTTY" was inserted into the spfile as shown in the following spfile, therefore, the instance cannot be started. In addition, everytime when issuing the command "cat spfilermslag.ora", the word "PuTTY" will automatically appear in the command line after the "cat spfilermslag.ora" command.
$ cat spfilermslag.ora
gé ú&PuTTYrmslag.__db_cache_size=150994944
rmslag.__large_pool_size=4194304
rmslag.__shared_pool_size=71303168
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/u01/app/oracle/admin/rmslag/udump'
[oracle@wppnode2 dbs]$ PuTTY
What is going on here? How can I fix the problem?
Thanks!

You might just have to do it the old fashioned way. At least it will be a good learning experience.

Unable to connect to Database using Grid Control

Hi,
I am attempting to connect to my Oracle Linux Machine which has 2 databases FROM my 10g Grid control which is on a Windows XP 32 bit.
Although I can login to the actual linux box with the host and database credentials ; I cant use the same to login to the database using Grid control.
I have tried testing the connection using Grid Control >> Preferences >> Preferred Credentials >> Host ; but its just not recognizing the credentials as correct.
When I attempt to startup the database using the host and DB credentials : ERROR MESSAGE : <servername> : <servername> comes up.
My agent on linux box is up. My Listener is running fine.
On my Grid control .. i have the DB, OMS, and Agent running as well.
Any inputs on this issue, I'd appreciate very much.

Thanks for your reply.
Under Hosts on the Main Grid Console Home Page >> "server3.sam" Status shows UP. This server houses my 2 databases. But when I click on Databases >> it shows Instance DOWN.
Status
Failed
Details Failed to connect to database instance: ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach).
I have verified that my lsnrctl status is good on the linux box. My target agent is up and running on it as well.
So I try to start the STARTUP button >> I enter the HOST Credentials of the Linux box and the Database credentials which I use "SYS" (in upper case - just in case that mattered) and choose SYSDBA ;
Error Message
server3.sam: server3.sam
I created a new dba account and try to login ... dont seem to work ; I tried using SYSTEM account and even altering my sys and system passwords .. all turn out negative.
And the ANSWER to your question ---> Grid Control >> Preferences >> Preferred Credentials >> Database Instance >> corresponding to my database name ; I enter my sysdba username / password AND the host username / password of my Linux box >> TEST >> which also turns out negative.
This entry is auto filled in since I "checked" the box "Save as Preferred Credential"; initially when I tried to start the DB using the STARTUP button.
By the way, my Win XP doesnt really have a password set under User accounts.
Any suggestions please ?

Has anyone used Grid Control to implement DataGuard?

Has anyone used Grid Control to implement DataGuard?

Hi,
You are right, without the B&K software there is not much I can load. However this is usefull information. The VIs that you have are a wraper for the calls to the ActiveX pulse control. If those VIs do not provide the functionality for the Intensity Module there are 2 options:
+The developer did not develop VIs for the module
+The Pulse ActiveX control does not exposes the functionality of the Intensity Module.
To find this out, you can create a new VI that opens a reference to the Pulse ActiveX object and start looking for some property that gives you a reference to the Sound Intensity Module, or a a function that allows you to run any methods from the module. There are a bunch of examples that ship with LabVIEW on calling Ac
tiveX modules.
You can also try to get the documentation for the ActiveX interface for Pulse to find out whether the Module is exported or not.
There is also the option to use Native LabVIEW functions for the Sound Intensuty measurements; the Sound and Vibration Toolset can take sound intensity measurements that are compliant with industry standards.
Let me know how this goes.
Regards,
Juan Carlos

Building reports around grid control database.

As a part of Grid control support activity many times we need spend hours to verify if all the targets have been assigned rules and thresholds so that they can generate alerts well before the trouble occurs.
So i was wondering is there any way by which which can write some script that will scan all the targets and find out which are not assigned to rules.
I am not sure if i can access these information from grid control database.
Can somebody help me in this ? is there any way to find out which rules have been assigned to which target or what is the threshold assigned to a particular targets by writing sql query / using oracle packages ?
Appreciate help in this regard.

Here is some sql I use for this purpose..
(I comment out pieces and such to tweak what I am reporting against)
Run this as sysman in your repository db.
select
target_type,
target_name,
metric_column Metric,
metric_name || ' ' || key_value Name,
decode(warning_threshold,' ',null, decode(warning_operator,'Equal To','=','Not Equal','!=','Greater Than','>','Less Than','<',warning_operator) || ' ' || warning_threshold) Warning,
decode(critical_threshold,' ', null, decode(critical_operator,'Equal To','Not Equal','!=','=','Greater Than','>','Less Than','<',critical_operator) || ' ' || critical_threshold) Critical
from mgmt$metric_collection m
--where target_type = 'oracle_emd'
--and metric_column = 'HostInfovszGrowth'
--and warning_threshold != '20'
--where target_type = 'host'
where-- metric_column like 'tnsPing'
-- (warning_threshold != '80' and critical_threshold != '95')
--and
target_type = 'oracle_database'
--and target_type = 'host'
--and
--target_type = 'oracle_listener'
--target_type = 'oracle_emd'
--and metric_column like 'generic%'
--and warning_threshold like '%ORA%'
and target_name like 'QL%'
and metric_column = 'pctUsed'
order by 1,3,2

Error while setting up Standby database using Grid Control

I am getting this on grid control 10.2 on windows env while creating standby database using EM. I have checked this folder and it does exists.
any ideas?
C:\oracle\ora10.1\network\admin\listener.ora: java.io.IOException: The system cannot find the path specified

There is no problem tnsnames.ora & listener.ora since I am getting the same error for just standby backup also.
this is error on emoms.trc file
2007-07-18 13:19:37,318 [EMUI_13_19_37_/console/database/instance/sitemap] ERROR perf.sitemap setMaintenancePage.1812 - java.sql.SQLException: ORA-00933: SQL command not properly ended
ORA-06512: at "SYSMAN.ECM_UTIL", line 509
ORA-06512: at line 1
java.sql.SQLException: ORA-00933: SQL command not properly ended
ORA-06512: at "SYSMAN.ECM_UTIL", line 509
ORA-06512: at line 1
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:180)
     at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:869)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1153)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2932)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3023)
     at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4132)
     at oracle.sysman.util.jdbc.PreparedStatementWrapper.execute(PreparedStatementWrapper.java:173)
     at oracle.sysman.util.jdbc.CallableStatementWrapper.execute(CallableStatementWrapper.java:135)
     at oracle.sysman.eml.ecm.cloneHome.repaccess.CloneHomeSql.getClonableHomes(CloneHomeSql.java:449)
     at oracle.sysman.eml.ecm.cloneHome.repaccess.CloneHomeSql.getClonableHomes(CloneHomeSql.java:561)
     at oracle.sysman.eml.ecm.cloneHome.repaccess.CloneHomeSql.isHomeClonable(CloneHomeSql.java:363)
     at oracle.sysman.db.adm.inst.SitemapController.setMaintenancePage(SitemapController.java:1807)
     at oracle.sysman.db.adm.inst.SitemapController.setRequestAttributes(SitemapController.java:1385)
     at oracle.sysman.db.adm.BaseController.handleEvent(BaseController.java:1154)
     at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:577)
     at oracle.sysman.db.adm.RootController.handleRequest(RootController.java:174)
     at oracle.sysman.db.adm.DBControllerResolver.handleRequest(DBControllerResolver.java:114)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:781)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:337)
     at oracle.sysman.eml.app.Console.doGet(Console.java:318)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:88)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:122)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:102)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:336)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:659)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
2007-07-18 13:19:42,505 [EMUI_13_19_42_/console/database/dataguard/create] ERROR em.dataguard validate.1118 - CreateBean: ClassNotFoundException: null
2007-07-18 13:19:44,224 [EMUI_13_19_44_/console/database/dataguard/create] ERROR em.dataguard validate.1118 - CreateBean: ClassNotFoundException: null
2007-07-18 13:19:46,052 [EMUI_13_19_44_/console/database/dataguard/create] ERROR em.dataguard mapHelpPage.2002 - StandbyUtil.mapHelpPage: dghelp for database/dataguard/createSchedule not mapped to any help ID.. Defaulting to oemdba_consens_data_guard_page
2007-07-18 13:19:47,130 [EMUI_13_19_47_/console/database/dataguard/create] ERROR em.dataguard validate.1118 - CreateBean: ClassNotFoundException: null
2007-07-18 13:19:53,052 [Thread-85] ERROR jobs.dbclone createTemplate.379 - TemplateManager.createTemplate(): Exception: java.io.IOException: The system cannot find the path specified
2007-07-18 13:19:53,052 [Thread-85] ERROR jobs.dbclone submitJobPreparation.3013 - DBCloneObject.submitJobPreparation(): Exception: java.io.IOException: The system cannot find the path specified
2007-07-18 13:19:53,052 [Thread-85] ERROR jobs.dbclone submitDBCloneJob.3228 - DBCloneObject.submitDBCloneJob(): Exception: The system cannot find the path specified
2007-07-18 13:19:58,006 [EMUI_13_19_58_/console/database/dataguard/create] ERROR em.dataguard onEvent.1038 - CreateConfigController: Exception: oracle.sysman.db.dg.util.VxxStandbyException: The system cannot find the path specified

Daily Report using Grid Control

Similar Messages

Maybe you are looking for