Daily sales book,some fileds required ,----urgent
hi experts,,,,
i need to give the dailty sales report/book details.
then my field list is like this
date
invoice no,
plant,
cust no.
cust name
item code
desc
qty
unit of measure
basic value------all these fields i got upto now from bkpf,vbrk,vbrp tables......
i need some more fields to execute this reprot.
list of fields is................
excise duty---rate,amount
education cess--rate,amount
vat/lst--rate,amount
cst--rate,amount
sales--rate,amount
others--rate,amount
where can i get these fields
In advance thanks to all of u who will get back asap.
Hi
OOPS, SORRY...
Regards
Eswar
Message was edited by:
Eswar Rao Boddeti
Similar Messages
-
Daily sales outstanding report
Hi Friends,
Client has requested a Daily Sales Outstanding(DSO) Analysis Report to be generated each month which should measure the average number of days a company takes to collect receivables after a sale is made.
Does SAP have any standard report for this, if not please guide me what should I do to get above requirement.
ThanksThe balance and the sales have been determined from table KNC1.However, this table is not updated per credit control area.
When one company code is associated with more than one credit control area, there are possibilities of errors coming in DSO, in some old releases.
OSS note 885637 may be relevant.
Function modules CUSTOMER_DSO_CALCULATION, CUSTOMER_DSO_EXPLANATION could be used in this calculation.
DSO days
The number of the days the customer took to clear an invoice is calculated as the DSO days,(the balances are set against the sales). The DSO days are calculated with the following formula:
DSO = Balance/sales per period x 30
DSO calculation: Number of posting periods to be included
The number of months to be taken into account determines how many previous months must be included when calculating the balance and sales per day.
<b>Customizing controls</b>
In customizing, SPRO>Financial Accounting>Accounts Receivable and Accounts Payable>Credit Management>Define Preliminary settings for credit management.
The day sales outstanding figure is normally calculated in the standard system using a 3 month period.
DSO Calculation with current balance or average of 3 months balance are set up in configuration. -
Daily sales by month and cumulative sales for year
Hi Experts,
I have a reporting requirement where I have to show daily sales by month and cumulative daily sales for particular month for the year.
e.g. If the current month is January then my result shows fine. see below
Calendar Day
Net Sales
Target
Sales Year
Actual
Target
01/01/2014
100
90
01/01/2014
100
90
02/01/2014
200
180
02/01/2014
300
270
03/01/2014
300
290
03/01/2014
600
560
04/01/2014
400
350
04/01/2014
1000
910
But If I am in the month of Feb and I want to show sales for the month and cumulative sales for the year for just Feb but instead of showing cumulative total from 01/01/2014 to end of Feb it starts again at begining of Feb - See below
e.g.
Calendar Day
Net Sales
Target
Sales Year
Actual
Target
01/02/2014
200
190
01/02/2014
200
190
02/02/2014
400
380
02/02/2014
600
570
03/02/2014
600
590
03/02/2014
1200
1160
04/02/2014
800
750
04/02/2014
2000
1910
Expected Result - sales for the year shoud show cumulative result from 01/01/2014 - 31/12/2014
Calendar Day
Net Sales
Target
Sales Year
Actual
Target
01/02/2014
200
190
01/02/2014
1200
1100
02/02/2014
400
380
02/02/2014
1600
1480
03/02/2014
600
590
03/02/2014
2200
2070
04/02/2014
800
750
04/02/2014
3000
2820
How do I achive this?
please help.What else you need?
looks like you got #working days for the month, use that metric as of jan 15th -
Field Sales Ord. is a required field
HI,
While doing 412 -e movement getting this error message
Field Sales Ord. is a required field for G/L account 1000 192006Hi,
I think the order movement you have selected must have some reference/reservation with it.
So whenever you select that particular movement, the order no. is essential.
This particularly happens for make to order production, where order is mandatory.
So just enter the order number in it, so the process gets completed.
Regards,
Siddharth. -
ORBO - Daily sales report includes Order Init Transaction?
Hi All,
Can you please any one guide me in ORBO application,the daily sales report includes the Order init transaction details?
Appreciate your help.
Hari.Oracle Retail application doesn't consider Sale of Item which has not been moved out from the store and in other words all the orders , layaway ,special orders Initiated considers will not be accounted as sale amount despite of retailer has received amount in advance( Item inventory get reserved for those transaction ) .Transaction amount of those transaction will be added in sale of the particular day when those transaction will get completed i.e. Item inventory ( SOH) get down .
I hope i have answered your question. Please let me know if further information required
Thanks
Himanshu Lohani
[email protected] -
Hi All,
I have a requirement to build a daily sales report (Revenues & Cost) Report:
Upon analysis of the Input and output layouts, i concluded that all the charateristics & Keyfigures are present in the COPA dsrc,, but except one Characteristcs called "Discount Group" is not there in the COPA DSrc.
As per my knowledge ,if i want to enhance the COPA Dscrc, i shud enhance the Operating concern or the structure of CE1XXXX Table
Can any1 tell me how to enhance the COPA DScrs Extract structure with this Discount group field?
The enhancement must be based on Sales order Number and its Item.
Thanks and Regardsehanced the COPA Extraction Structure
-
Daily Sales reports - $0 price items
In the daily sales reports, I'm getting some rows showing $0 customer price and royalty price. These are for paid, not free apps. It shows a product type identifier of 7 (instead of the usual 1).
What does this mean ?
Anyone else getting these ?Never mind.
I just realized that these are the no-charge update numbers. -
Table where weekly and daily sales data is stored
Can any one please tell me in which all tables i can get weekly and daily sales as i get in S001 which is period wise.
S001 Table itself is based on date which you can segerate on week and further daily and may be month. This is communication struture table ,. For futther details look of s*** table if you dont fullfill your requirement
reward points if useful
rajesh -
How to identify Sale Order costing is required for Items in Sales Order
Howstandard cos estimate*w to identify Sale Order costing is required for Items in Sales Order?
On which criteria we can conclude Sale Order Costing is reqd ?
? * means what and wat is the purpose and how to chk for the Item in Sales Order, either it is required or not**.Hi Dharamveer,
The best way is to make the order qty is equal to the quantity delivered. This way, when some one looks at this order in future - they think that the order was for X and the delivery was for X qty is completed. They will not know the background of the issue unless they go through change log. Even in change log, they see that the Ord qty was adjusted, but may not understand why?
The good practice is to make order qty equal to already delivered qty.
Create a new line for the remaining qty and reject the same with appropriate reason for rejection. This way, any one can understand the background , the reason for rejection easily. Hope it helps ! -
Rfvesbook (sales book report)
when I execute the report rfvesbook and I select document type Z4 (billing doc.transfer), I get a time-out transaction, now If I select any other document type) different from Z4 ones, the report runs OK. What could I do to report this problem.
regards,
m.salernoHi Balaji,
sorry, did nt really got your question. I dont remember to have seen a technical sap term by sales book. But if you are referring to domain, I guess it should talk about the sales made with respect to customer and the materials along with quantities sold. The answer may just be too vague, so please excuse for that.. Please provide more info so that i can understand the requirement more clearly..
regards
sadhu kishore -
Query for daily sales by warehouse
Hi
I need a query for Daily sales by warehouse. I am only new to this and struggling with generating.
ideally it will look like the below. With no selection criteria as I would like to schedule the report to email out at the end of each day.
Warehouse Revenue GP GP%
NSW $xxxx $xxx 35%
Would someone mind helping
thanksthankyou , But i have multiple warehouse and i dont want to use a selection criteria.
to expand on the original example
Warehouse Revenue GP GP%
NSW $xxxx $xxx 35%
QLD $xxx $xx 32%
VIC $xxx $xx 32%
Also the results should only show figures for the day the query is executed
Any help is appreciated.
Similar layout to this,except using query and whs code. the below is generated using sales analysis and customer group. -
No Daily Sales/Trend Report for today?
Has anyone received your iTunes Connect Daily Sales/Trend Report for today (1/25/10)? I have not received mine yet. First time it hasn't been up at this hour.
It usually arrives at 2:30am (it's 9:30am here now) or if it's delayed, usually in another region, there's a note in big red text on the reports page.As I recall (back when I only had a few apps just starting in the store), yes, no daily sales means no daily report. Wait for the weekly report to confirm.
-
Report on daily sale,stock availability,pending order,Ageing report
Report on
daily sale for time period
stock availability
pending order
Ageing reportDear Goutam
Through VF05, you can see sales daily.
For stock MMBE
For Pending Order, VA05
Thanks
G. Lakshmipathi -
It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??
Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times. -
Some apps require Adobe Flash; however, when I attempt to upload the program, I receive message to the effect that my iPad (version 7.0) cannot support Adobe Flash, so I am unable to view some attachments sent. I just bought my iPad recently and am still figuring everything out. If there is some solution to my problem, I would appreciate being advised. Thanks.
https://discussions.apple.com/thread/5461191?tstart=0
Maybe you are looking for
-
I use several yahoo email addresses and it has always been very convienent to see if it is a personal or business related message by simply seeing the To: line. Now all of sudden all I see is "me" and it is not at all helpful. I didn't make the chang
-
Runtime report designing VS 2008
Hi.. Can anybody please guide how to implement the requirement of end user report desiging in the our application exe using Crystal Reports 2008? Regards, Vibhuti
-
How to trigger attribute change run manaully
Hi all, i need to update a master data object with new data. i have the flat file. i scheduled info package and exected DTP (datasource - >Master data object). now I need to trigger attibute change run manually. How would i do that? Pls help Please s
-
I created a small project using the trial version. The project is 1440x1080. After removing the trial version I installed the released version from DVD with serial numbers. When I open the small project I still see the "created with ... 9 trial .."
-
Hi, I try to set the default button on my JPanel in a JDialog. When the dialog opens, my buttons is the defaultbutton. So far so good. When I fill in a list in my JPanel and I push then the enter-button my default button does nothing and the cursor s