Daily System Health monitoring report from SOLMAN

Hi Experts,
I am working on a project where I need to triiger a consolidated system health report from sol man, much like early watch report.
Only thing is that it should be generated daily for each system.
Well That makes the expectation.
Progress so far :-
     a. Applied E2E120 for managed system ie Technical monitoring is working for that system.
Challenge :-
   a. Generating a consolidated report, with checklists for system logs, dumps, qrfc / trfc's. As Technical monitoring is giving these info separately.
   b. Options in technical monitoring are too many and not sure which can deliver what i am looking for.
          a. IT Performance reporting
          b. Service level reporting
          c. SDCCN Reporting.
          d. or automatic configure reporting.
   c. The report has to be generated periodically only once in a day. It should not be alert monitoring that an system alert triggers a mail and management is bombarded with too many mails.
Any valuable suggestion will be very helpful and will certainly be rewarded.
Thanks
Abhijeet

Hi Jhansi,
few things first, I have really liked your blogs and forum discussion on Sol Man. They have been really very helpful.
Now, after spending around 2-3 days on it, Closest bet is "IT Performance reporting". With this i am compromising with consolidated report. (Just hoping management agrees for it )
But here is the new challenge I am going through. It is the web templates to use for specific checklist.
I used below link.
http://help.sap.de/saphelp_sm71_sp05/helpdata/en/3f/ecbef23769488f806177717adee541/content.htm?frameset=/en/a3/074aa01bbe4662b99bc20ec5263cf8/frameset.htm&current_toc=/en/81/6f8fe54f854ef2bd412c8660f5ed6e/plain.htm&node_id=463
I need template for System logs, qrfc, trfc, PI messages etc. It is not present in the link provided. Even searched on SMP, it was not available. Can we manually create and use the web templates.
Also when i used such templates, I am getting following error message in the monitoring
Let me know your inputs.
Thanks
Abhijeet

Similar Messages

Steps to configure BPM report from Solman 7.00 for productive system ECC6.0

Hi all,
Please given me the steps to configure Buisness process Monitoring reports from Solman 7.0 for productive system( ECC6.0, windows & database oracle 10.2),
I wanted to create the Reports of monitoring the buisness.
Regards,
Akash Basis consultant.

Thanks for replying Volker von Gloeden,
This thread is my first one in SDN & I am very glad that someone has given the answer ,
I will take a look for solution you have provided & will inform you.
Thanks again.

EWA report from SOLMAN not generating properly.

Hi expert,
EWA report from SOLMAN not generating properly. It's generating like Rating not Determined (Gray) - SAP EarlyWatch Alert.
Solman version: SAP EHP 1 for SAP Solution Manager 7.0
Thanks in advance. Any help appreciated.
Regards,
Debi pal

Hi,
Refer to SAP note: Note 762696 - Grey rating for Earlywatch Alert
Thanks
Anil

Administration Utilities - System Health Monitor - alui 6.1

I'm curious if there is a way I can turn the System Health Monitor utility into a portlet?
It seems like there should an easy way to do this, but I can't seem to find it. Any insight you might be able to provide on either the System Health Monitor or the administration utilities. Or anything that might help for that matter, would be be most appreciated.
Thanks,
-Kevin

Hi geoffgarcia, thanks for looking into my question. I have tried to pass the existing URL back in, as you have suggested, but with no luck. For example:
> Create new Web Service : URL : http://[MYPORTALSERVER]/portal/server.pt?open=space&name=diagnostic&psname=ObjMgr&psid=3&cached=true&control=EditorStart&editorType=10
and then generate a portlet to that service. When I add that portlet to my homepage it throws a
"Error Error - The server has experienced an error. Try again or contact your portal administrator if you continue experiencing problems."
error, but doesn't log the error. View source shows the error to be
"Current User does not have sufficient permission to object with id = 52: com.plumtree.server.marshalers.PTException.... blah blah blah...."
Any ideas? Maybe I'm missing a glaringly obvious setting/configuration?
Thanks again,
-Kevin

System level statics reports from sol man

hi all,
how can i check system level statistics reports from solution manager.
please help me.
rgds
vinnu.

Vinay,
Can you tell us how you solved the issue?
Regards,
Jai Shankar

Extracting Monitoring reports from J2EE system to SOLMAN

Hi,
I would like to monitor a J2EE system from Solution Manager system and obtain Some related reports from J2EE system to SOLMAN in order to analyze its performance.
please suggest me about the ideas to go about the same.
Your inputs will help me a lot.
Regards,
Kaushik

Hi,
To monitor JAVA system on Solution Manager you need to install Solution Manager Diagnostic or Sitescope or CA Wily Introscope for your java system and after that you can configure your Java monitoring on Solution Manager.
Please refer Note 1107033 for CCMS config for java.
V....

Report from solman to r/3

Hi,
Is it possible to fetch the crm_dno_monitor standard report which is availble in solution manager to r/3 system...
Regards,
Thiru. R

well in case you want to transfer the data fetched from a report to XI then you can use ABAP proxies (i think this is what you were looking for)
Ref:
To est. connection - /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Client Proxy - /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Server Proxy - /people/siva.maranani/blog/2005/04/03/abap-server-proxies

Cisco Prime Network Control System Health Monitor Reflected XSS

Apologies for the n00b question,
I am a security manager not a Cisco guru so please bear with me
Our Nessus scanner has picked this vulnerability up
Nessus states that there is no fix
Looking on Cisco's bug search the status is set to fixed,
https://tools.cisco.com/bugsearch/bug/CSCud18375
I found this article on Cisco's website
Multiple Vulnerabilities in the WLSE Appliance - Cisco 2011-12-10
There are two vulnerabilities that exist in the CiscoWorks Wireless LAN Solution Engine (WLSE). The first is a cross site scripting (XSS) vulnerability that may allow an attacker to gain administrative privileges on the system. The second is a local privilege escalation vulnerability that can be used by an attacker who already has authenticated access to the command line interface to obtain access to the underlying operating system. Cisco has made free software available to address this vulnerability for affected customers. This advisory is available at http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20060419-wlse
Is WLSE part of WCS or am I grasping at straws here? Our techies don't seem to think so
We are currently running CISCO Wireless Controller System (WCS) running on Version 7.0.240.0 which is end of life
Is there an upgrade path for newer software?
Has anyone else encountered this issue
http://www.kb.cert.org/vuls/id/830316

1. Its possible but some sort of lock/bug is preventing the removal of the controller. Is the controller reachable? Have you attempted to restart NCS to see if you are able to remove the controller afterwards?
2. 8510 not supported on NCS, you must upgrade to Cisco Prime 1.3.x or higher.
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.3/release/notes/cpi_rn_13.html#wp86690
3. Follow the upgrade steps for all information regarding patches and migration path:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/quickstart/guide/cpi_qsg_1_3.html#wp69624

SCOM health Check report

please suggest me how to generate SCOM health check report and automation for the same. I am using scom 2007 R2.
And need all windows servers health check report from scom as well...?

Hi
As a good starting point you could use these reports
http://www.systemcentercentral.com/scc-health-check-reports-management-pack-v2/ and some Details here
https://blogs.technet.com/b/kevinholman/archive/2010/07/21/system-center-central-some-really-cool-opsmgr-health-reports-available.aspx. Which give you a pretty good picture of your environment.
For a MG check up on the SQL side see here
http://blogs.technet.com/b/kevinholman/archive/2010/06/16/management-group-checkup-a-database-perspective.aspx
Cheers,
Stefan
Blog: http://blog.scomfaq.ch

MRP-Vendor Monitoring Report

Hello,
There is a need of vendor monitoring report from my client.
Here is the detail of the report need:
Its a report ,that will be used by MRP controller and expidetators to track vendor for the critical items
These critical items are the one ,which are due for delivery and with stock quanity going negative ,so these expidetors followup with vendors to make sure the delivery happens on time ,before negative stock situations
Note:Expidators ,wont take receipts into account ,during this period calculation of negative stock
Let me know ,if there are any questions ?
thanks,

Rajen,
True,its a report to monitor vendor delivery based on exisiting stock situation
So basically ,first understanding existing schedule from vendor ,we can get the expected delivery date,
based on which we need to keep run date as reference ,and calculate next 5 daily available capacity and list the same ,by excluding any receipts in b/w.
I have given descrption of the requirement in my earlier comment,the reason for asking the same is to confirm if someone has already worked on such scenario ,and can guide the report map in right direction.
Please read my earlier post again and provide any valuable reply
Regards,Srinivas

High Update Response Time ticket from solman

Hi Experts,
We have monitoring setup from solman. We are getting an alert for ECC prod that the there is High Update Response Time. Can you please let me know how to fix it?
Thanks,
Asad

Hi Asad ,
How many update work process do you have . See a high amount of wait time for the update process
You may increase their number if you have enough memory .
Go to SM13 , Go to -> Administration of update system
Goto - > Statistics
Response Times: Rules of Thumb - CCMS Monitoring - SAP Library
Less than 1 second is the recommended , though sometimes you may breach it .
Thanks ,
Manu

Only showing APP monitoring Reports in SCOM 2012 Reporting

Hi all,
Recently i upgrade the SCOM 2012 from 2007 R2 Managament Server only because in previous environment we have only one MS server and SQL server 2008 SP2.
Now i have 4 servers for SCOM 2012.
1) SCOM Managament server (which was upgraded)
2) SQL server 2008 SP2 (running 3 instances)
3) SCOM ACS server (New installation)
4) SCOM Reporting server (New installation)
I have using two accounts
1) SCOM.action 2) SCOM.sdk
When i install reporting, reporting Tab are showing in the SCOM
2012 console but only Application monitoring reports are showing in Reporting. I was deleted some MP’s and then import it but the report are not imported in reporting tab. I also check SSRS, it works fine. Both SSRS url’s works fine.
I don’t know whats the problem.. Please clarify me what’s the problem.????
Regards,
Kamran

Hi Muhammad,
I am also facing the exact issue as expalined above.
Even the application monitroing reports are not working. When i try to launch application monitoring reports from reportmanger , I get dataset error and see that apm.* views are missing.
Also tried deleting and importing the managementpacks, without any success. This issue is happening only in production environment.
It will be very helpful if you can let us know what Account permisisons need to be checked for. Thanks in advance.
Thanks

/BDL/TASK_PROCESSOR not getting triggered in satellite system from Solman

Hi,
We have scheduled EWA report in Solution Manager for one of the satellite system.
Solution Manager has sudddenly stopped creating of job /BDL/TASK_PROCESSOR0000002218 (ie job which is created immediately as EWA is scheduled in Solution Manager)
/BDL/TASK_PROCESSOR is running correctly and on hourly basis in satellite.
The EWA report is getting generated in Solution Manager after long time and without job /BDL/TASK_PROCESSOR0000002218 (is sessin specific job) being triggered.
Kindly help.
Regards,
Trupti M

Hi Paul,
My problem is solved.
Actually the Task: EarlyWatch Alert for Solution Manager under 'To Do' view of sdccn of satellite system was somehow getting scheduled as Back dated(ie instead of 30.04.2020 it was getting scheduled at 28.04.2010)
Due to this when we would do 'Start now' for the Task 'EarlyWatch Alert for Solution Manage' it was not getting triggered.
So I manually did refresh session which was mentioned under steps for manully sending data to SolMan under solution_mamanger tcode.
Due to this job BDL/TASK_PROCESSOR0000002237 got created.After this job got completed Task ''EarlyWatch Alert for Solution Manager ' got automatically generated.
I back dated the date for Task ''EarlyWatch Alert for Solution Manager" and started it.
Due to this the job /BDL/TASK_PROCESSOR0000002238 got created in satellite system for sending data to SolMan (This was not happening earlier.)
Extract from Solution_Manager tcode when scheduling:
When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
To start the task immediately, select it and right-click to call up the context menu.
Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
Thanks for all your help. Hoping my post will also be helpful for others.
Regards,
Trupti M

System Performance(Health) Monitoring Tool

Hi Experts,
We need to monitor our BW system performance at the database level, OS level, Data Retrieval level, Data loading level. Is there any tool or BW queries to track the performance?
Regards,
D. Dinesh

Hi Dinesh,
I think the best tool is to subscribe an Early Watch report from BW, you can find all necessary information under www.service.sap.com/bi. SAP will send you a very detailed report with all your problem in the system at every level (DB - AWB - BEx - GUI - ...).
If you do not want this report (you must pay to have it) you can try with Statistics, check in Business Content for all related Structures, also if I am not sure this will satisfy all your requirements.
Ciao.
Riccardo.

Is there is any way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory

Hi
Can Configuration Manager provide a way to find the data transfer from client to Configuration Manager for health monitoring and hardware Inventory. How can I know what amount of data is consumed during that process

Place archive_reports.sms in %systemroot%\ccm\inventory\temp\ for both 64-bit and 32-bit computers.
There are two situations where you can use this depending on the type of client:
1. To keep inventory reports on a client (that is not an MP), create the following file:
%systemroot%\ccm\inventory\temp\archive_reports.sms
2. To keep inventory reports on a MP (that is also a client), create the following file:
<x>:\sms_ccm\inventory\temp\archive_reports.sms
The XML file will be saved in the inventory\temp folder.
More information on the above here: http://blogs.technet.com/b/configurationmgr/archive/2012/09/17/controlling-configuration-manager-2012-using-hidden-files.aspx

Daily System Health monitoring report from SOLMAN

Similar Messages

Maybe you are looking for