Daily view displays recurring one day events for 2 days.

There are a number of recurring all day events (birthdays for example). From a browser accessing a group Wiki calendar, the daily view will display the event on BOTH the day it's scheduled for and on the next day as well.
The views for week and month are correct as are all views (even daily) from within iCal.
This happens from both Firefox and Safari.
Any idea how to address?

I just deleted the entire Google-account from the Pre calendar and re-added it. It seems that all events show up correctly now

Similar Messages

HT202337 list all-day events in day view on Mac icalendar with Yosemite upgrade

Before I upgraded to Yosemite, I loved that the day view of the iCalendar on the Mac showed all the calendar events (including all-day events) in a list view. Now that I have upgraded, the day view shows in the same format as week view with timed events primarily displayed and all-day events at the top in a small section with a scroll bar. I use all-day events a lot, and would much prefer the list of events (including all-day events) when looking at the day view! (It is this way on the iPhone, but no longer on the Mac icalendar.) How can I get back to this listed events in the day view?? Or if not, is there a way to move down the bar underneath the all-day events section (to show more of the all-day events at a time)? PLEASE? Help?? Thank you in advance!!

Carriebrandon03,
To Repair Disk Permissions, Home Folder Permissions and ACLs in Recovery Mode. Do the Following:
Shutdown your Mac > on reboot hold down the ( Command ) and ( R ) keys.
If prompted > Select the best language suited for you and tap the Arrow in the bottom middle >
On the "OS X Utilities" Window that comes up select Disk Utility and press the Continue Button > Select the indented Hard Drive mine is Macintosh HD > If you have FileVault enabled you may have to unlock the drive, I don't so I'm not 100% sure > Click the "Repair Disk" button, wait until you see "The Volume Macintosh HD appears to be OK" It will be green > Click the "Repair Disk Permissions" button wait until you see "Permissions repair complete" > Hit the Red X top left corner to close Disk Utility. > You will see the "OS X Utilities" Window again.
Select Utilities ( Menubar ) > Terminal > In Terminal type:
resetpassword
The "Reset Password" Window will open behind Terminal > Select your Hard Drive mine is Macintosh HD > On the drop down select your User's name > Click the "Reset" button bottom right > repeat for each user.
Select  ( Menubar ) > Shutdown
Screenshots Included below to help guide. Sorry about the quality of some of the shots as I had to take the photos of my screen.
Hope that helps,
Weston

Displaying more than 1 all-day event per day

I am going through the laborious process of entering data on my new iMac having previously shunned iCal on my MBP. All seems to be progressing well until...
In the first month I edited, 2 all-day events coincided and they displayed perfectly. However a few months later the same 2 all-day events coincided and, despite them being identical to the previous occurrence, only 1 event shows correctly and the second appears as 3 small dots. I have searched high and low for an answer with no luck. I have deleted them and re-entered in case there was an unseen error - same result. I cannot figure out why one day shows correctly and another not ? Any ideas or explanations ? Thanks, in advance.

I have several multiple entries on the same date and they all display in the calendar on the Iphone. This might be because I recorded these entries on the phone and not the computer.

I can only see 5 "All Day Events" in Day View.....

.... then I need to scroll down. Is there a way to 'expand' the All Day Events area so they are all visiable without scrolling? Thank you!

What IOS are you using?
With IOS7:
Settings > Notification Center > Calendar Dy View: ON
then scroll down to INCLUDE section
      Tap Calendar
          ALERT STYLE: Alert
          Calendar Alert > choose a sound here
          Show in Notification Center: ON
          Include > 5 items
          Show in Lock Screen: ON

To cure the March 2013 monthly Calendar problem I amended my All- Day events for April 1 to timed events on my iPad. Now the Calendar does not load at all on the iPad, but still OK on iPhone 5. Any suggestions please?

In order to cure the problem on my iPad of the month of March 2013 only causing the Calendar to close, I amended all "All Day" events on April 1 to timed events. Now my Calendar will not open, although my Calendar on an iPad 2 and on iPhones 5 & 4 work perfectly. I have tried turning iPad off/on, but no effect. Any ideas please?

I'm having the same issue with my 3rd gen iPad too. I always viewed my calendar in month view. It won't even open since it's stuck on month view.
I've quit the app (properly closing via taskbar) and re-opened - crashes immediatly.
Quit the app and rebooted (via holding home/power buttons until restart) and opened - still crashes immediatly.
Anyone know how I'm able to get access to the app so I can change all day events to timed events in April. Is it just April 1st or all of April? I haven't even opened my iPhones iCal yet to see if it's having the same issue.
Also, not sure if this will work but iCal on my mac wireless syncs my calendar events. I'm wondering if I change April 1st all day events to timed events whether it'll sync and fix the issue of crashing?

"All-day" events in iCal appear one day early in week-view on iPad

Just got an iPad and synced with iCal. I noticed that "all day" events appear correctly in day-view and month-view, but in week-view, they are shifted one day earlier. But if I choose to edit such an event, the information is still correct, e.g. an all-day event for Monday, May 31 and Tuesday, June 1, has that information, and it appears on Monday and Tuesday in day- and month-view, but in week-view, it has "slid left" such that it appears on Sunday and Monday. Anyone else seeing this? Any solutions?

I have the same issue on all day events synced from Exchange. The items look fine in the day or month view.

Some all day events don't show in day view

We are using Leopard server to host iCal with various machines running 10.5.8 Leopard and 10.6.7 Snow Leopard. We have 16 calendars we share under Delegates. Some calendars (on Leo & SL clients) are missing a specific "all day" event in day view but they are there in week and month view. The missing item is the same one across all machines. I've checked delegations but that does not fix it. I'm still doing a survey, but most of the machines missing the events are running SL. Anyone having this experience? Thanks

I take it then you don't have a memory problem. Just to clarify, your events on the calendar are fine, it's just the display
on the home screen where they disappear?
Have you tried a battery pull to reset all options? Pill the battery from the phone while it is ON, leave it out for about a
minute and replace. Leave the system completly reboot 1-2 minutes and see if the problem continues. This is a common fix on these forums.
Let us know!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Outlook 2007 and iPhone Calendar All-Day events not displaying correctly

I recently took the 3.1.3 update for my iphone and have since noticed that syncing all-day events from my Outlook 2007 exchange environment to the iphone is not working correctly. The all-day flag on the iphone is not being checked, thus the event shows up all over the calendar instead of just a single item at the top of the calendar. This only happens for multi-day events. Single-day, all day events show fine. Here's the tests I did:
1. Created a single day, all-day event for tomorrow June 18 in Outlook 2007. Made sure that they all-day checkbox was checked in Outlook. Waited for the sync and it shows up fine in iPhone calendar. There is a single line at the top of the "Day" view that lists the event. When you look at the event, the all-day checkbox is checked in iphone calendar.
2. Next I updated the event in Outlook to make it a multi-day, all day event. I changed the end date to be June 19. I made sure to leave the all day checkbox checked in Outlook. Once synced, the all day checkbox on the iphone is now unchecked and as a result the event takes up the whole "Day" view for both days.
Is there a solution for this? Only seen this since I updated to the 3.1.3 firmware. All events show up the right way in Outlook. It is only the iPhone calendar that shows them wrong. Thanks in advance for any help.

Same problem here.
All Day events entered in Outlook 2007 on my work machine that have ALL DAY checked and are only on that ONE Day, seem to come out fine. If however we have an all-day event that goes multiple days, then it enters it on my iphone taking up 00:00-00:00, which is very messy if you have two ALL-day envents on the same day (when tracking different personnel for example).
I have noticed the real annoying item though is that changing it on my iPhone 4 directly, that once I put in the right start and end dates, and choose ALL DAY, about 5 seconds later it actually changes the START DAY! This makes you go back to change the start day, then it changes the end day so you change that, and now finally all sorted.
This NEVER happened on my iPhone3G that I have used with Excahgne for over two years now. Only since I got my iPhone4.
PLEASE Apple, fix this!!!!

Multiple All Day Events Missing in Week View

Hello,
I just got my first BB a Curve 8900 and am very impressed.
The only thing I don't like is that if I have more than one all day event on a particular day, in Week View I can't see them.
(I've used a variety of other phones/PDAs over the years and this is not normally an issue)
I've googled this and haven't found much relating to it, other than people not seeing all day events on the home screen or something.
Is this a BB 'feature'? Is there a work around?
I'd like to be able to see my week ahead at a glance and don't seem to be able to.
Thanks in advance.

Hello RobertBL,
I have the same problem. In week view i only see 1 event on days with multiple day events. I use firmware version 4.6.1.152 (platform 4.2.0.91). My Curve 8900 is T-Mobile branded (Netherlands). Until now i haven't found a work around. In other calendars (pocket informant and Agendus) i don't have this problem in weekview, so it must be a BB firmware bug.
Greatings
Message Edited by maccloud on 05-06-2009 09:50 PM

IPhone 4 calendar entries get duplicated for all day events

Hi all,
A new one, I have an iPhone 4 which is duplicating all day events for no reason. You can delete one of the events and then it promptly shows up again. The other two all day events for the same item can not be edited or deleted. They originally where doing the same thing on the Mac but I resolved that by following Apple's support info on deleting the cache and resetting sync history. The Mac shows the correct calendar info just the iPhone is doing the duplicates. I've removed the iPhone calendar and then added it back to the iPhone to have the same thing happen. I've also copied all calendar info to a new calendar, removed the old one from iCal and the phone and synced the new one to have the same thing happen again. I am not using Mobile Me, never have and don't have an account so it's not that.

Angus,
I've found a solution that worked for me. I hope it works for you too:
1. Make a backup of your Mac iCal. (It's not a step to recover the data in case something go wrong, we'll need the backup file for sure)
2. Download iCal Dupe Deleter from http://www.nhoj.co.uk/icaldupedeleter/
3. Run iCal Dupe Deleter and select the calendar in wich you have the duplicated events. Then press the "Test selected calendar" button.
4. If the app finds any duplicates, another button will appear. Press it and follow the steps.
5. Once iCal Dupe Deleter has opened iCal and restored the data with the new one, load the backup file that you saved on step 1 and restore.
6. Sync your iPhone with iTunes as you usually do and your iPhone calendar will be perfect again.
Please, let me know if it works for you.

Organizing multiple all day events in one day

I'm trying to figure out if I can use iCal to act as my doggy daycare biz calendar.
I tried adding each dog's appointment as an all day event, creating multiple all day events per day, however I can't figure out if there is a way to organize the order of these events. They seem to appear in the order I add them in and I can't change that. Especially when I make some of the entries repeat on a daily basis the order just gets more and more messed up. I've tried doing this with only 5 clients as a test and things are looking horrid so far. I would need to be able to enter about 20 clients, and under multiple calendars.
Would be nice to be able to have this on my computer and on my iphone by using the iCal as opposed to maintaining my current pen and paper system. Any suggestions?

You can't change the order of the event, they do go in based on the order they are entered.

Easier way to create All-Day Events?

Creating an All-Day Event seems a little cumbersome to me and I was wondering if I was missing something. Is there a way to create an All-Day Event from scratch, meaning keyboard command/menu item? The only way I can find is to create a timed event, then mark it an All-Day Event with an extra step. I know you can click inside the Event section of the day in Week view, but if the day you are working on has the most All-Day entries, there is no place to click.
There is a command for New Event. Why not All-Day Event? I am sure I missing something, but I have searched the Help menus and support groups and cannot find a way to do it.
Thanks,
whardy7

Yes, I have. That is quite obvious. But, what do you do when there is already one there? That one takes up the empty space for double-clicking. If a different day has 2 events, you get lucky. In that case, there is empty space because the All-Day Events box grows to accommodate the highest number of All-Day Events for that given week.
Let me ask my question again. Once the All-Day Events box is full (which is dependent on the day with the most events - could be 1 event, 2 events, etc.), how do you add an All-Day Event? It seems there is no way. You have to create a timed event, then convert it. If your timed area is already full of events, that can be really tricky.
I hope that is clearer.

To-Do as All Day Event

Hi,
Is there any possible way to make an Applescript that automatically copies your To-Do items and then creates an All-Day event for each of them? This is really handy for viewing To-Do items with due dates from an iPod's interface.
Thanks,
Harrison

This might do the job. It makes a new event from any ToDo with a due date and deletes the ToDo. I have added a line to make the new event an all day event but this extra has NOT been tested.
AK
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">(* Convert ToDos with due dates to Events
AK IT Carlow May 2006
Sep 2007 - added line to make the new event all day*)
tell application "iCal"
set CalList to name of every calendar
repeat with ThisCal in CalList
set SomeTasks to todos of calendar ThisCal
set SomeTasks to reverse of SomeTasks --otherwise delete causes problems
repeat with ThisTask in SomeTasks
try
set DoItOn to (due date of ThisTask) + 3 * days --fails if no date
tell calendar ThisCal
set ThisEvent to make new event at end of events
set summary of ThisEvent to summary of ThisTask
set start date of ThisEvent to due date of ThisTask
if (count of (description of ThisTask)) is not 0 then set description of ThisEvent to description of ThisTask
if (count of (url of ThisTask)) is not 0 then set url of ThisEvent to (url of ThisTask) as text
set allday event of ThisEvent to true
delete ThisTask
end tell
end try
end repeat --ThisTask in SomeTasks
end repeat --ThisCal in CalList
end tell</pre>

Any way to make a day event show as a conflict?

I've asked this in the past, but don't remember the answer.
Is there any way to create a day event so that it would show up if someone did a 'check conflict'? Currently our department uses day events for many things, and we run into problems because people create meetings because they didn't find any conflicts. However, some people are actually not available because they have a day event for that day.
If there is no way to do this now, is it planned for a future release?

Hi Michael,
Unfortunately, day events are non-blocking events so they are not reported when you check for conflicts. It is something under consideration for a future release.
Thanks,
Lily

All Day Event not Shown as busy.

Hi when i make a all day event for somebody. It is not recognised as not avalible that day when i try to make a other appointment.

iCal does not provide a way to make an all-day event block your free time, though the underlying data format (and the server) does support that ability. If you want such a capability in iCal please file a report against iCal for that feature.

Daily view displays recurring one day events for 2 days.

Similar Messages

Maybe you are looking for