Daisy Chain 2 cinema displays to thunderbolt port on iMac?

Presently I have an iMac (mid 2011). I am running 2 cinema displays thru my 2 thunderbolt ports on my iMac. Is it possible to daisy chain these 2 additional displays to save a thunderbolt port? If so, how would be greatly appreciated.

Only Thunderbolt displays are capable of being daisy chained.
If you had one Thunderbolt Display and a Cinema Display then you could put the Thunderbolt Display first and then connect the Cinema Display into it, but it cannot be done with two Cinema Displays.

Similar Messages

Can the last link in a thunderbolt daisy-chain be a non-thunderbolt monitor using miniDisplay port?

Can the last link in a thunderbolt daisy-chain be a non-thunderbolt monitor, using miniDisplay port?
For example, Mac mini <--> external SSD <--> apple cinema display 30" (using miniDisplay port adaptor plugged into the SSD's second thunderbolt port)

TechnoMax wrote:
for instance STAE122 or STAE 127?
FWIW, STAE129 is the current version TB adapter
that is self powered and has TB daisy chain port.
STAE122 and STAE127 are older versions and
not the current model, though there may be stock of
these around. As to whether this will solve your issue,
I don't know.
Can I trick the Mac under Bootcamp as OS to use HDMI for the monitor? Dell officially says that the monitor can only accept 1900x1080 over HDMI, but some have fiddled wth different computers with custom settings that worked with some Monitors but mostly under Linux and to Dell 2711.
The MacMini HDMI port is hardware limited to 1980x1200.

What can I connect to the cinema display´s firewire port?

What do you think of connecting an external hard drive to the cinema display´s firewire port? My other firewire ports on my G5 are already occupied.

The FireWire ports on a Cinema Display can be used with anything that the FireWire ports on a Mac can be used for; they are included because a Mac and external monitor may be set up in a way that prevents the ports on the computer from being easily accessed.
(23780)

How to drive a 30" Cinema Display from a new 27" iMac?

How do I drive a 30" Cinema Display from a new 27" iMac that has no obvious video out port? There are lots of ports, but nothing resembling or identified as a video out port. Is the very small hole in the cabinet by the power in port the thing I'm looking for? If so, the power/video adapter for the Cinema will not work as is. Do I need a Mini DisplayPort to VGA Adapter? I am completely uncertain about this, and could use solid advice. The AppleCare tech I spoke with today seemed not to have a clue. He said he would get back with me on this. He didn't.

Overview
Every Mac with a Mini DisplayPort allows you to connect an external display or projector using an adapter. You can use an external display as your main workspace or to extend your desktop, or you can work in mirrored mode with a projector so you can view what your audience sees.
Use the Mini DisplayPort to Dual-Link DVI Adapter to connect your Mac to a 30-inch display that includes a DVI connector, such as the 30-inch Apple Cinema Display HD, and enjoy the ultimate widescreen canvas with a resolution of 2560 by 1600 pixels.
Compatible only with Mac computers with Mini DisplayPort and Mac OS X v10.5.6 or later.

Daisy chain two display port monitors (Dell U2913WM) to new Mac mini Thunderbolt?

Everything I read said that I could hook up a display port monitor to a Thunderbolt port on the mac mini. I purchased two display port monitors (Dell U2913WM) that can be daisy chained, and hooked them up. All I get is mirroring. Does anyone know how to turn off mirroring with this setup? I did not get the "uncheck mirroring" option in preferences until I hooked up the second via the HDMI port instead of a daisy chain. The problem with that is, I cannot take advantage of the full resolution through the HDMI. It seems I have wasted my money on two monitors.
Looking for advice on:
1) How to daisy chain these two Dell monitors to the mac mini and turn off mirroring and use an extended desktop, or
2) How to take advantage of the full resolution through HDMI port?
Any help would be greatly appreciated.
Thanks!

So re-reading this thread, I now realize you did exactly what I wanted to do but your issue was having a cloned vs. extended desktop. Oops!
I believe your "nothing plugged in" issue is the cable. I'm not sure that TB cables are backwards compatible with DP - I think it's only the ports. Do you see multiple monitors in "System Preferences > Displays" if you hook the monitors up like you described in your OP?
My Dell U2713H arrived today and it works like a charm with the supplied Mini-DP to DP cable. The built-in display on my 13" mid 2009 MBP still works if not in clamshell mode, although I will mostly use mine in my HengeDock. In the OSD of the monitor, you can access "Display Settings > Display Info" and it will show you the DP capability. Mine is only DP 1.1a and I believe to run 2 of these at full resolution you will need the bandwidth in DP 1.2 which includes MST (daisy-chaining). This could be your problem.
Can you access the same menu in your OSD and report back what your DP compatability is?
Thanks!
mgb

How to connect two DVI screens to Thunderbolt Display's Thunderbolt Port?

Hi everyone,
I have a new MBP and an external Thunderbolt Display. The Thunderbolt Display itself has a Thunderbolt port, and I was wondering if there is anyway to connect to DVI screens to that. My goal is to have the Thunderbolt Display and 2 x 24" Samsung DVI screens connected to my MBP.
Alternatively, has anyone had success using a third party device like the Matrox 2 go to drive multiple monitors from the usb port?
Thanks,
Dave.

You could try a TB>DVI adapter (here's one from Monoprice) but I don't know that it will work - I'm thinking that you could have at least one of your Samsung displays use it. You may also want to see if you can find a HDMI>DVI adapter for your second Samsung display - something like this?
I know that I've seen three monitor set-ups on YouTube - but I'm not sure what was connected to what. Easy enough to daisy-chain ATDs but it gets a bit tougher when utilizing HDMI ports, etc., and I'm not sure about the GPUs ability to drive all three displays.
Oops - sorry - strike that second paragraph - I thought that you were running a Retina display MBP...
Clinton
Message was edited by: clintonfrombirmingham

Cinema display VS Thunderbolt display

Hi!
I'm about to start a bidding on an Apple Cinema display 24" bought in july 2010. Now, besides general opinions about this display, are there any fundamental differences between the Cinema display (CD) and the newer Thunderbolt display (TD)?
What I already know is that the TD has 3xUSB, 1xFireWire, 1xThunderbolt and 1xEthernet on the back where the CD only have 3xUSB. Also, the TD only need the thunderbolt cable to the (i e) MacBook to function where the CD need to have the USB cable in addition to the cinema display cable connected to function.
Have I got that right?
I have the newest MacBook Pro with thunderbolt output, but do I still need the USB cable to get the 3xUSB hub on the display? Or is it enough with the cinema display cable from the display?
Hope I didn't make it to complicated to read =)
The price right now is almost 500$.
Oh, that's right - one more thing! I've read a little about compatiblity with different displays and computers. My MacBok Pro has thunderbolt output, but is it still possible to connect the Cinema display that does NOT support thunderbolt?
Jonas

I googled my question and found this article:
http://reviews.cnet.com/8301-13727_7-20043524-263.html
I quote the article:
"The new port is backward compatible so it can still be used to connect to DisplayPort devices; however, only the new port can be used to connect to Thunderbolt devices.
This means that while you can physically connect a Thunderbolt device to a Mac with DisplayPort, the device will not work, but if you connect a DisplayPort device to a Mac with Thunderbolt, then the device will work."
Helpful picture:
http://i.i.com.com/cnwk.1d/i/tim/2011/03/15/ThunderboltChart_270x130.png
So if you believe in this, I actually can use the Cinema display with my MacBook with thunderbolt port. Or am I getting this all backwards?
Jonas

Daisy chain my (3) new thunderbolt Lacie D2 external

I just purchased 3 new Lacie D2 4TB hard drives and a rack to hold them and I want to daisy chain them but they only have one TB port each, did I just waist $1300.00? Is there a hub or multie port TB wire to use....I cant be the only one in this exspensive dilema!

Why can't you daisy chain your drives. If it's because the iMac only has a Thunderbolt port and you have Firewire drivers purchase the Thunderport to Firewire adaptor from Apple: Apple Thunderbolt to FireWire Adapter - Apple Store (U.S.)
OT

Daisy Chain TB Display

I have tried to daisy chain a second TB display to my 13" MacBookPro. One display works but not the second. Is there a software issue or is there something I am not doing correctly.

Thanks turbostar and Jeff. Kinda answers the question but the table at http://support.apple.com/kb/HT5219?viewlocale=en_US has a small caveat at the bottome that says:
"You can connect a second Apple Thunderbolt Display (27-inch) to a MacBook Pro (13-inch, Early 2011) and (13-inch, Late 2011), but the built-in display on the MacBook Pro will go dark. This is expected behavior."
So, where are the instructions for this to actaully happen?
Thanks!

Can I use my macbook pro mid 2012 as an external display using thunderbolt port

Hi,
I want to use my macbook pro (mid 2012) screen as an external display for a raspberry pi using a HDMI to Thunderbolt cable, via the thunderbolt port on the macbook pro. Would this be possible? Can the macbook pro's thunder bolt port act as an input and is any additional software required?
I look forward to hearing from you.
Thanks in advance!

Welcome to Apple Support Communities
You are referring to Target Display mode. Target Display mode can only be used in 27-inch iMacs and iMacs with Thunderbolt, not MacBooks Pro > http://support.apple.com/kb/PH11302
Unfortunately, you can't use the MacBook Pro as a display. It doesn't support the monitor mode

Two 27 cinema displays (not thunderbolt)

I have two non thunderbolt 27" cinema displays (2010). I want to attach them to a mac mini, is that possible?
Thanks,
Daniel

I tried the CinemaView Duo Dual Display Extender for Mini Displayport, but it causes one of the displays to resolve at 800x600 maximum, and is very distorted.

Apple 23" Cinema Display - The USB Ports Are Not Working

The USB ports on my Cinema Display are not working. I do have both Tiger and Leopard installed on my Power Mac G5. Does this issue have to do with Leopard? If so, how can I fix this issue?

I would power down everything, disconnect the monitor from the computer, and the power from the computer and the monitor, wait 15 minutes, and reconnect the power. *Double check* your monitor connections, make sure the USB is properly inserted to the compters USB port. Might try a different port. If the USB ports of the computer work with known working devices (like a keyboard) and the problems continue, it looks like the monitor ports have a hardware problem.

Can I use a 30" Apple Cinema display with a new 27" iMac?

I have a brand new iMac(27-inch, Late 2013), OS X Mountain Lion (10.8), i7 3.5 GHz, 32MB RAM, 4GB NVIDIA. I will soon be upgrading it to Mavericks, if that makes a difference. My understanding is that the resolution on it is 2560 x 1440.
I'm looking at buying a used 30" Apple Cinema display. I'd like to use it with my new iMac. The only advantage for me would be that the 30" screen is larger and things on it easier to see (or so I'm guessing).
I need to know if the 30" Cinema display would work with my new iMac, and if it would, as I'm guessing, give me a larger, easier-to-see screen.
I currently have my new iMac connected to my old mid-2010 iMac as a target display (that old iMac has a minidisplay port--no Thunderbolt), and that works great. I just want a larger screen.
I called Apple support, and the tech rep wasn't sure it would work. He seemed to think that the 30" Cinema displays were made with different connections. Some had minidisplay ports (which he thought would work), and some a cord built into them that provided some other type of connection (that I guess would not work as far as he knew).
Can anyone tell me if this would work? Would my new iMac and its video card support the 30" Cinema display? Would the result be as sharp and good-looking as my iMac's built-in 27" display, but only bigger (which is what I'm hoping for)? Any advice is appreciated.
I don't yet know many of the specifics of the 30" Cinema display I'm considering. I know it is about 3 years old. And here is a picture of the back of it:

Yes, you should be able use the 30" Cinema Display with your new iMac without problems. You'll need a mini-DisplayPort to Dual-Link DVI adapter:
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter
I haven't had the 30" myself to test so I don't know if there any caveats. Perhaps someone else here will have personal experience.
Regards.

How to connect old Cinema Display (plastic frame) to new imac 2012 27"?, How to connect old Cinema Display (plastic frame) to new imac 2012 27"?

I just got an imac 27 late 2012, and like to connect and old Cinema Display 20" with plastic border( looks like an easel) what adapter do I need?, if this. Is possible at all..., thank you

Hi Cathy,
What connector is on that Cinema? ADC, VGA, or DVI?
Video Card:
GeForce GTX 675MX
VRAM Type:
GDDR5
Details:
This model has a NVIDIA GeForce GTX 675MX graphics processor with 1 GB of dedicated GDDR5 memory. At the time of purchase, it can be custom configured with a NVIDIA GeForce GTX 680MX with 2 GB of dedicated GDDR5 memory for an extra US$150.
Standard VRAM:
1 GB
Maximum VRAM:
1 GB*
Built-in Display:
27" 16:9 Widescreen
Native Resolution:
2560x1440
Details:
This model has a 27" LED-backlit 16:9 widescreen TFT active matrix display with IPS technology and a native resolution of 2560x1440. Apple also reports that the "cover glass is fully laminated to the LCD and an anti-reflective coating is applied." Previous Aluminum iMac models have the LCD covered by glass. The company no longer reports viewing angle or contrast ratio, however. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display replacement, keyboard replacement, a hard drive upgrade service, and more are provided.
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-late-2012-specs.html

HD support for 23" cinema display with a 20" intel Imac?

By using a 23" HD cinema display as a second monitor, will it still do HD even though the 20" intel Imac does not show HD? Is there anything special I need to do enable HD in this configuration?
imac 20" Mac OS X (10.4.8) dual 23" HD

I just received my intel 20 in IMAC and tried to hook it up with my 23 in cinema HD display. The display looks awful - lots of flickering, very grainy, all pink and blue. Thought it was the adapter (DVI to mini DVI), so I changed it. Tried clicking the "detect display" button, tried resetting PRAM, changing resolutions, all with no improvement. Plugged the display back to my old powerbook 15 in and it was picture perfect. My IMAC also has an upgraded 256VRAM. Am I missing something? Any recommendations are welcome.
Imac5,1 Mac OS X (10.4.7)

Daisy Chain 2 cinema displays to thunderbolt port on iMac?

Similar Messages

Maybe you are looking for