Damage Analysis report in plant maintenance
Hi,
I need to display the damage cause analysis via Transaction code MCI5. But the report does not display the description of the damage code. Could someone help me to fetch a report for the damage analysis with the text description.
Thanks,
Please clsoe this duplicate thread.
Similar Messages
-
Plant maintenance damage analysis report
Hi,
Could anyone please tell me how to fetch the damage analysis report with the code and description, t-code MCI5 does not give the description of the damage code.
Better, can someone please provide me with the steps to create a new MIS report with the use of infosets and infostructures,
thanks
ansarBeatle,
Once the report is executed, choose the menu settings > Characterstic display > key and description to display both the Code and the associated description. If you want toset this for specific user always, choose the user settings on the initial screen and set the Characteritic display to "Key and description" in the parameters screen.
Hope this helps.
Regards
Narasimhan -
SAP Standard Reports for Plant Maintenance
Dear Gurus,
Am a newbie in SAP trying to do Plant Maintenance.
Is there a list of standard reports for Plant Maintenance ?
What T-Code is that ?
Regards,
TootsieHi Thyaga,
Thanks. The answer is correct, and helpful. I can't see how the answers are awarded yet. Maybe I did not mark it as question when I create it?
Will try again next time. Happy Dewali to you.
Regards -
Query on MCJC - MTTR/MTBR Functional Location report in Plant Maintenance
We have recently upgraded our SAP 4.7 system to mySAP ERP 2005 ecc6.0.
We are facing problem in report derived using tcode'MCJC' in Plant Maintenance.When we execute MCJC (MCJC - MTTR/MTBR Functional Location ) transaction, there is no data appearing in the report output.This report is used to get the functional locationwise data from maintenance order. The transactions are entered for creating maintenance order & notifications through IW31. This is getting updated in table s070.
This is a standard report and was working fine in SAP 4.7.Hello Mr Subrahmanyam,
When you are saying that the Equipment is in Breakdown, it may happen that the whols FLock could be considered in Break down, but not necessary,
say we take an Example of a Work Shop, where Mechanical Workshop is the Functional Location and it has N no of Equipments like Lath, Grinding m/c, Welding M/c, Shaper Etc.... in this case can you please tell me if only one of the above mentioned Equipment is under Break down can the Whole Mechanical Workshop be termed as under Shut down.
What you are saying is correct in the Line Production, where we can have the Predessing as well as the Succeding Equipments, there for the Critical Equipment you generally have a Back-up Equipment, may be possible the capacity of the Backup might not be same as the mail Equipment, but still it can serve the Purpose for the Time Being. in that condition how can you say that the whole FLock is in Breakdown.
Hope I am able to clarify.
Regards,
Yawar Khan -
BI - PM (Plant Maintenance Implementation & Extraction )
Hi Gurus,
Could help in implementing of PM(Plant Maintenance) in BI & BI Extraction for PM Module
Provide me what is the pre requisite for implementing PM in BW/BI
Thanks in Advance
VenkateshHi,
Plant Maintenace has its significance in SAP-BI
PM is the integration of MM,Production,SALES & Distribution,Controlling etc,.we will keep all these data ready and depending on the user requirement we will create reports on Plant Maintenance
for more details go through the below link given by SAP
http://help.sap.com/saphelp_47x200/helpdata/en/2b/1b713896fab752e10000009b38f889/frameset.htm
http://help.sap.com/printdocu/core/print46c/en/data/pdf/MYSAP/SR_PM.pdf
Regards,
Marasa. -
Creating Z report for material stock (plant maintenance module)
hello,
we are implemented Plant maintenance module (SAP PM) in our organization.
our requirement is to create a stock report which will incldue
followings:-
1)material number
2)plant number
3) storage location
4) material type
5)valuation type
6)Opening Stock
7) OpValue
8)Received Stock
9) ReceiptValue
10) Issue Stock
11) IssueValue
12) Closing Stock
13) Closing Value
we want above details in ALV grid format.
to gert all the details for perticular material, we calcute closing stock and closing value in following manner:-
opening stock + received stock - issue stock = closing stock
opening value + recipt value - issue value = closing value
we are unable to find table name for accessing opening stock, received stock , issue stock & opening value ,recipt value , issue value from system. please suggest table name information for getting above details for creating Z reportDear friend,
Before to make a decision to bulid a custom report make sure you have checked out the following standard transactions:
MB5T Stock in Transit
MMBE Stock Overview
MD04 Stock/Reqs list
MB53 Plant Stock Availability
MB52 Warehouse Stock
MB5M Expiration Date list
MB5B Stock for Posting Date
MB5T Stock in Transit
MBBS Valuated Special Stock
MBLB Stock with Subcontractor
The possible tables are:
MARA, MARD, MARC, VBEP, VBAK(VBAP), EKKO(EKPO), EKBE, EBAN, EBEW, MSEG, MKPF,...
Good luck! -
Plant Maintenance Reports & Report Writer/Painter
Has anyone ever used Report Painter or Report Writer to produce SAP Plant Maintenance Reports? If so, what was your experience in using this tool and how difficult is it to produce reports?
The report that needs to be generated is for overdue PM orders (PM09) ....these are scheduled preventive maintenance orders.
We need to be able to determine if they are completed and if they are on time. This report needs to have the flexibility to choose the following
Functional Locations
Equipment
Plant sections
Main Work Center
Basic finish date / Planned Date / Overdue date (to be determined)
Maintenance Plan
Maintenance Activity Type
Group
We need to be able to run a chart from this data to show how many PM's are behind, how many were completed on time compared to the requirements, and any other chart that would be available (i.e. pie, line, bar etc.).
Thanks
RuthieHi,
the fields that you want in ur report must be available in ur operating concern data structure,,,
pls check if the characteristics and the value fields that you require is available in the data structure,,,
check KEA0 transaction..
Reward points if useful -
Hi gurus,
In some reports output i found the button ABC analysis button.
What are the featurs of this button, can anybody explain it.
Cheers,
SumithHi Sumith,
ABC analysis is used to classify characteristic values in order of importance for particular key figures.
Examples: ABC Analysis
An ABC analysis divides items into three categories:
A: Important
B: Less important
C: Relatively unimportant
Following are some of the examples of ABC analysis being used for different reports.
Purchasing Information System:
You can use the ABC analysis to classify vendors in terms of the key figure invoiced amount.
Sales Information System:
You can use the ABC analysis to classify sales organizations with regard to the key figure incoming order or material or the key figure invoiced sales.
Inventory Controlling:
You can use the ABC analysis to classify materials according to the key figure usage value.
Shop Floor Information System:
You can use the ABC analysis to classify work centers in terms of the key figure scrap quantityu2019.
Plant Maintenance Information System:
You can use the ABC analysis to classify object classes with regard to the key figure breakdown duration.
Quality Management Information System:
You can use the ABC analysis to classify vendors according to the key figure number of lots not in order.
Hope this helps you.
Rgds
Manish -
Re: Fleet management in Plant Maintenance
Hi Guru's
Here i have an issue reg the configuration screens in PM
In SAP-SPRO---Plant maintenance and Costumer Services, I am not able to find the Screens required for configuration for FLEET MANAGEMENT i e.,
1) Set List Processing for Fleet management objects.
2) Set reference object screen for Vehicles.
3) Consumption Relevant Counter reading Update.
These are mandatory for capturing the cost of the fuel into reports of Vehicle analysis report.
Please any one can Send me whether we need go for any Patches or to update any notes.
Present i am using ECC-6 EHP-5
Please reply back ,it is very urgent.
Regards
KumarI hope, for the below points there is no separate configuration.
1) Set List Processing for Fleet management objects.
2) Set reference object screen for Vehicles.
For 3) Consumption Relevant Counter reading Update.
IMG => PM & CS => Information systems for PM & CS => Configure Measurement document update
I hope, this is common for all the versions. Please check. -
can any get me code
interactive sales performance analysis report, comparing performance of sales in a sales organization over a user specified date range.hi,
check weather upto what extent it is useful for you,
Shipping Location - Plant VBAP-WERKS
Order Number VBAK-VBELN
Order Amount VBAP-NETWR
Order Base quantity VBEP-LMENG
Scheduled Ship Date VBEP-EDATU
Customer Name KNA1-NAME1
Customer City KNA1-ORT01
Customer State KNA1-REGIO
Customer Country KNA1-LAND1
Material VBAP-MATNR
Material Description VBAP-ARKTX
REPORT ZDOR1 .
Tables declaration ****************************
tables : vbak,
vbap,
vbep,
vbfa,
kna1,
vbpa.
variable Declaration ********************
data : int type f,
int1 type f,
s type f value '0.574'.
data : x type i,
y type i.
Internal table declaration ***************
data : begin of itab occurs 0,
vbeln like vbak-vbeln,
kunnr like vbak-kunnr,
werks like vbap-werks,
netwr like vbap-netwr,
matnr like vbap-matnr,
arktx like vbap-arktx,
lmeng like vbep-lmeng,
edatu like vbep-edatu,
name1 like kna1-name1,
ort01 like kna1-ort01,
regio like kna1-regio,
land1 like kna1-land1,
erdat like vbfa-erdat,
avg type f,
end of itab.
Selection Screen **************************
selection-screen : begin of block blk1 with frame title text-001.
select-options :
s_vbeln for vbak-vbeln,
s_vkorg for vbak-vkorg,
s_kunnr for vbak-kunnr,
s_werks for vbap-werks,
s_auart for vbak-auart.
parameters :
fdate like sy-datum obligatory,
tdate like sy-datum default sy-datum obligatory.
selection-screen : end of block blk1.
selection-screen : begin of block blk2 with frame no intervals.
parameters : p_excel as checkbox,
p_title as checkbox.
selection-screen : end of block blk2.
Event Processing **********************
initialization.
fdate = tdate - 365.
s_vkorg-sign = 'I'.
s_vkorg-option = 'EQ'.
s_vkorg-low = '2022'.
append s_vkorg.
s_vkorg-low = '2024'.
append s_vkorg.
s_vkorg-low = '2114'.y
append s_vkorg.
s_auart-sign = 'I'.
s_auart-option = 'EQ'.
s_auart-low = 'OR'.
append s_auart.
s_auart-low = 'TA'.
append s_auart.
s_auart-low = 'ZXD'.
append s_auart.
s_auart-low = 'KB'.
append s_auart.
s_auart-low = 'KE'.
append s_auart.
disply the report header *************************
top-of-page.
if p_title = ' '.
write : /001 ' report:', sy-repid,
115 ' Date :', sy-datum.
write : /001 ' System :',sy-sysid(3),sy-mandt,
115 'page :',sy-pagno.
skip.
write :/ 'From date :', fdate, 'To Date :', tdate.
Uline.
skip.
endif.
if p_excel = ' '.
write : /1 text-002,
10 text-003,
20 text-004,
40 text-005,
60 text-006,
80 text-007,
115 text-008,
130 text-009,
140 text-010,
145 text-011,
160 text-012,
200 text-013,
220 text-014.
Uline.
else.
write : /1 text-002,
10 text-003,
20 text-004,
40 text-005,
60 text-006,
80 text-007,
115 text-008,
130 text-009,
140 text-010,
145 text-011,
160 text-012,
200 text-013,
220 text-014.
Uline.
endif.
Start-of-selection **********************
start-of-selection.
if p_excel = ' '.
new-page line-size 132 line-count 65.
else.
new-page line-size 260 line-count 999999.
endif.
perform get_sales_data.
perform get_output_data.
get_sales_data *************************
form get_sales_data.
select vbak~vbeln
vbak~kunnr
vbap~werks
vbap~netwr
vbap~matnr
vbap~arktx
into table itab
from vbak as vbak inner join vbap as vbap
on vbak~vbeln = vbap~vbeln
where vbak~vbeln in s_vbeln
and vbak~vkorg in s_vkorg
and vbak~kunnr in s_kunnr
and vbak~auart in s_auart
and vbap~werks in s_werks
and vbak~erdat between fdate and tdate.
loop at itab.
select single edatu lmeng from vbep into (itab-edatu,itab-lmeng)
where vbeln = itab-vbeln.
select single name1 ort01 regio land1 from kna1 into
(itab-name1,itab-ort01,itab-regio,itab-land1)
where kunnr = itab-kunnr.
select single erdat from vbfa into itab-erdat
where vbeln = itab-vbeln
and vbtyp_n = 'R'
and vbtyp_v = 'C'.
modify itab.
endloop.
loop at itab.
move itab-netwr to x.
move itab-lmeng to y.
if ( y 0 ).
int = x / y.
int1 = int * s.
move int1 to itab-avg.
else.
move 0 to itab-avg.
endif.
move x to itab-netwr.
move y to itab-lmeng.
modify itab.
endloop.
endform. "get_sales_data
get_output_data ***********************
form get_output_data.
loop at itab.
if P_excel = ''.
write : /(4) itab-werks under text-002,
itab-vbeln under text-003,
itab-netwr under text-004,
itab-lmeng under text-005,
itab-edatu under text-006,
itab-name1 under text-007,
itab-ort01 under text-008,
itab-regio under text-009,
itab-land1 under text-010,
itab-arktx under text-011,
itab-matnr under text-012,
itab-avg under text-013,
itab-erdat under text-014.
else.
write : / itab-werks under text-002,
itab-vbeln under text-003,
itab-netwr under text-004,
itab-lmeng under text-005,
itab-edatu under text-006,
itab-name1 under text-007,
itab-ort01 under text-008,
itab-regio under text-009,
itab-land1 under text-010,
itab-arktx under text-011,
itab-matnr under text-012,
itab-avg under text-013,
itab-erdat under text-014.
endif.
at end of vbeln.
sum.
write : / itab-werks under text-002,
itab-netwr under text-004,
itab-lmeng under text-005.
skip.
endat.
endloop.
endform. "get_output_data
Regards -
What are the standard tables for plant maintenance in r/3
I need the list of standard tables for plant maintenance in r/3. and also
is there any way we can find the field name and table which it belongs to in r/3, based on the description of the field.I NEED THE FIELD NAMES FOR FOLLOWING FIELDS AND CORRESPONDING TABLE NAMES
Equipment status
registration number
insurance type
insurance type description
registration date
expiry date
insurance companies
expiry date
policy number
amount insured
premium paid
created by ..so ..on
for our report in PM .. insurance data report
THANKS -
Origin Object Type for Plant Maintenance Orders in Profit Center Accounting
Hi,
I want to make a selection for plant maintenance orders in transaction KE5Z, report for line items in Profit Center Accounting. When checking possible input options for the selection field <b></b>Origing Object Type<b></b> the system shows value 15 for Maintenance Orders. However I discovered in our system the maintenance orders are reported as Origing Object Type 03, which is Overhead Orders according to the selection list. So I cannot distinguish between overhead orders and maintenance orders in this report.
What is the cause our maintenance orders are assigned to Origin Object Type 03 in stead of 15 and what is the customizing transaction to correct this ?Looks like, this is no longer supported. Refer to note 168004 and 102434.
Cause and prerequisites
These functions were not programmed to meet the above requirements.
As of Release 4.0, the object type is transferred directly.
Solution
Once you have implemented the advance correction. the origin object type 'Overhead cost order' (03) is assigned irrespective of what is the SCOPE for orders.
As a result of implementing this note or as of Release 4.6B, the order category distinguishes between overhead cost orders and production orders in the origin object type. In this case, the following origin object types result (as described above in 1.):
Order category 04 to 10, 40 => 04 (production order)
All other order categories => 03 (overhead cost order)
The logic that the origin object type was set depending on the object class (as described above in 2.) is no longer supported. The object class can be evaluated separately in Reporting. -
The corrections of this note refer in Release 4.0B to the corrections from Note 102434. -
Hi
The users wants a Variance analysis report in such a way say there a is variance from target to acutal by cost elements detail of from where that variance come from other than from general variances categories.
Say for ex: if it is a input quantity variance of 10, they want a report showing from were that variance come from, in more detail. They don't want to go to every order at month end to look and analyse every single PO to see why the variances, is it feasible in SAP?
Thank you,
NiviThese reports run on summarized values. Please run KKRV for summarization by plant for the given periods.
-
Hi all
Can anyone tell me where can I raise queries about Plant Maintenance?
Looking is an option.
Edited by: kishan P on Oct 5, 2010 2:35 PMDear Saran,
Thanks for responding to my query. Kindly let me know does these tables have got any link with other Quality Notification tables like QMEL, QMFE, QMIH, QMMA, QMSM, QMUR and QPCT. I am picking rest of my report data from these tables.
Regards,
Alok.
I'll be rewarding you the points without fail. -
Plan cost in Plant maintenance order
Hello,
I need to show plan cost in plant maintenance order on the report. It appears in the cost tab (overview tab inside the cost tab). Please let me know if you know any function module.
Regards,
Eswar.Try
CALL FUNCTION 'PM_WORKORDER_PLAN_COSTS_SET'
Standred program is using this FM and it has table " PMCO "<b>
include = LCOIHF2Y</b>
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"<b></b>
Maybe you are looking for
-
A newbie problem - Why 'ORA-00942: table or view does not exist'
Hi, I am a newbie having a very basic problem. I have just created a table by reading in a CSV file. However when I try to SELECT from it, I get an error message saying :- ORA-00942: table or view does not exist How can this be when I can see the tab
-
CS4 and Windows 8 compatibility
Has anyone successfully installed CS4 on Windows 8? I am currently using Windows XP and received a pop up saying Microsoft are no longer releasing updates for XP after August and I am entitled to a free download of Windows 8. I am trying to decide wh
-
Amount import script based on entity
I have a local currency data file with all of my entities in it. However, because of the way SAP stores one of the currencies I need to multiple the amounts for one entity by 100. I have attached the script below to amount field in the import format
-
Image swaps with fade out and in
I am new to Dreamweaver, in fact only got into it to do my own website. I want to create image swaps with a fade out and then fade in with the new image. Nowhere can I find out how to do this so far. Can anybody point me in the right direction. Many
-
HT1848 iTunes and music transfer from laptop to iPad 2
I'm trying to transfer music on my laptop iTunes to my iPad. How can I do this?