Damaged audio configuration

I have a file that was working fine last night. now when I open it, it will play but the faders in the mixer are stuck. I can control them in the inspector, but if I try to drag a fader in the mixer after a couple of tries, Logic will crash. I occasionally get a 'damaged audio configuration' message.
Last time I opened it all my Virtual instruments had gone silent.
Any thoughts?

There is no automation data. I'm going try rebuilding it in a new file and recreate the VIs.
That's about all I know how to do - unless there's a way of reparing the audio configuration.

Similar Messages

Any way to fix "damaged audio configuration"?

have a session here that says it has a "damaged "audio configuration". the session still opens, but is there any way to fix this?

I could make out a few of the words, but I couldn't get the context of it. As ryclark says, it's way too far gone for any treatment I'm aware of. With noise, there's often something that can be done, but with distortion you simply can't do anything even remotely sensible at all.

"audio configuration is damaged" error while while loading "crashed" song

I've been working on a song for quite a while, I created a new track, moved a copy of a sequence from another track to this new track and opened the media browser to find a sound for the new track. Each preset I tried caused the error message ("audio configuration is damaged") to be displayed and I needed to hit the "ok" button 6 or 7 times to let the song play. Soon Logic crashed completely and now the song won't open at all (same error message every time).
Any thoughts, suggestions?
Thanks much!

Hi everyone,
I just ran into the "audio configuration is damaged" error twice tonight while working on a project. I wasn't able to recover the first project which cost me about 4 hours of work so I started a new project and after a couple hours got that error again while dragging a sample from the loop browser into a new track. I was able to load up a backup before I got the error, saved that as a new project file and apparently it's working again but clearly this is unacceptable.
I'm currently considering doing a fresh install of both Mac OS X and Logic Studio.
Apple, please look into this instead of archiving the threads related to the "audio configuration is damaged" bug. There are at least 10-20 threads already on this topic, yet they always get archived. I'm seriously considering ditching Logic and doing my arranging/composing also in ProTools from now on.

Audio Configuration damaged...

I started a song yesterday that was fine and dandy for a while, but now when I open it I get a message saying "Audio configuration damaged." Anyone know what this means and how I can fix it (without having to recreate the song from scratch, of course).
It still opens and seems to play just fine, but messages like that make me nervous....
Thanks,
-Jeff

No DAE+DTDM here, and I just had this happen this morning.
I had renamed the song, to reflect the edits I was doing, and only had a couple of back-ups that had been saved, when Logic crashed, and I got the "Audio Configuration Damaged " window when I tried to re-open.
In my case, the "Damaged" prompt wouldn't go away, no matter how many times I hit "O.K." I had to force quit Logic.
And the 2 back-ups that were in existence were also damaged.
Fortunately, because I had re-saved under a slightly different name, from an existing version, I was able to start over... but still losing 25 to 30 minutes of work.

"audio configuration damaged" ...except its not.

when im scrolling through the midi instruments and effects for vocals, sometimes a window pops up saying "audio configuration is damaged" but i can still play and record the midi sounds and effects!! any one know why this is happening? thanks

I haven't been able to resolve this issue. I attempted to export the critical files track so I didn't need to re-edit them but the file was mute when I tried to play it back.
I then reverted to a previous backup that I had on time machine about an hour before the issue appeared.
I'm now back to where I was but I still don't know what caused it.
Praise be to who ever came up with the idea of time machine. I dips me lid yet again for saving my arse.

The Notorious "Audio Configuration is Damaged" Error

i've seen it discussed on every Logic-related message board on the web. no solution seems to have been found.
i've been another victim of this strange error since last night.
it happened while i was assigning a software instrument to a track.
i've trashed logic preferences, repaired disk permissions. nothing has helped so far.
saved the project with a different name. still the same.
a message keeps popping up saying "Audio Configuration is Damaged".
it pops up every time i change an instrument, track settings or open plugin windows on a track, or try to save the project.
i do eventually manage to perform whatever i need, but only after clicking OK each time that error message pops up.
what's this? any news on how to fix this?

Hi everyone,
I just ran into the "audio configuration is damaged" error twice tonight while working on a project. I wasn't able to recover the first project which cost me about 4 hours of work so I started a new project and after a couple hours got that error again while dragging a sample from the loop browser into a new track. I was able to load up a backup before I got the error, saved that as a new project file and apparently it's working again but clearly this is unacceptable.
I'm currently considering doing a fresh install of both Mac OS X and Logic Studio.
Apple, please look into this instead of archiving the threads related to the "audio configuration is damaged" bug. There are at least 10-20 threads already on this topic, yet they always get archived. I'm seriously considering ditching Logic and doing my arranging/composing also in ProTools from now on.

ITunes cannot run because it has detected audio configuration problem?

I've got Windows XP, recently did a system restore and was forced to re-install iTunes afterwards. After installation, I click the iTunes icon and get a pop up "iTunes cannot run because it has detected a problem with your audio configuration." I went to the iTunes support page and found a similar trouble shooting scheme. I applied both options and both failed. I tried re-installing again to repair, but after the repair, the problem still remains. I found a major difference in the trouble shooting scheme however and I wander if that could be it. The web page shows quick time's audio channels as "Stereo (L R)", however my quick time control panel doesn't feature that channel. Instead, there are 7 "LayoutTags" to choose from, each containing 7 digits. I'm no computer whiz, so I'm going to need help on this one.

replying to lowriderpharaoh.
hmmmmm. it's sounding like you've still got a damaged version of QuickTime in the PC. (or at least, there's something going wrong with the quicktime.)
let's try swapping out the QuickTime again. we'll take a few additional explicit precautions this time.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
if it doesn't launch properly, are you still getting the unusual display effects in the QT preferences?

Audio Configuration Contains Unknown items

Has this issue been resolved ?? I have been using Logic Pro 9 for 3 years and yesterday I encounter this issue. Been searching all over the internet and seems like there are lots of questions out there but I did not see any resolution ?? Thought I will post it here. I even ran Logic Pro in 32 bit mode. I usually run in 62bit, but nothing has changed. Please help !!!

Hey,
We have related problem...we have a project we started in Garageband '08 that developed "audio configuration is damaged" alert that leads to an ""audio configuration contains unknown items" alert after hitting ok. We have a Mackie Universal Control hooked up to our setup. We tried to load the project into Logic Studio, but the same messages pop up. In Garageband you can click past it repeatedly and get back to your project, BUT in Logic you can never get past the messages, and you have to force quit. Not sure if the Mackie control board caused this problem...don't have a solution yet and have not figured out how to extract the pieces of the Garageband project into a new project.
HELP!
Thanks,
Chaz

After upgrade to iTunes 11 "iTunes has detected a problem with your audio configuration"

After upgrading to iTunes 11 I have lost all sound on my PC running Windows XP. When I try to open iTunes I get the following message: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." I have also lost sound when I attempt to listen to audio from a Website while in a browser session. I notice I have also lost the volume setting icon from the system tray in the lower right corner of the screen.
Please advise.

Something went wrong during the upgrade to iTunes 11. I have lost audio on my desktop PC running Windows XP. No sound in iTunes: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." No sound during browser sessions. The volume control icon disappeared from the system tray in the lower right corner of the screen.
It seems that an audio driver(s) were damaged or deleted. When I go into the Control Panel and check the reading for the audio hardware, the entry for the DVD/CD-ROM drive says:
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Click Troubleshoot to start the troubleshooter for this device."
Please advise.

Audio Configuration Destroyed

Hello. I just spent 16+ hours creating a masterpiece, and now when I try to open Logic, it tells me that the "Audio Configuration is Damaged!". All the tracks are limited to only 9 simple audio tracks. No Buses, no outputs, no audio instruments, no nothin'. Anyone have any input on this lack of input?
Thanks for your help!
-Dylan

I haven't been able to resolve this issue. I attempted to export the critical files track so I didn't need to re-edit them but the file was mute when I tried to play it back.
I then reverted to a previous backup that I had on time machine about an hour before the issue appeared.
I'm now back to where I was but I still don't know what caused it.
Praise be to who ever came up with the idea of time machine. I dips me lid yet again for saving my arse.

Itunes cant open due to Audio Configurations

I was Messing with my sound settings because of an over the internet Voice program called Ventrillo I don't think that the Program has anything to do with the error but I don't know how to get either itunes to open or how to get my sound settings back to default

Does this help?
iTunes has detected an audio configuration problem

ITunes wont open due to audio configuration.

Hopefully someone can help me, when I click to open iTunes, a message pops up saying "iTunes cannot run because it has detected a problem with your audio configuration." I have windows vista and dont know what I need to change or where I change it. Please help!
Nicole.

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Itunes starts but fails to open due to audio configuration problem

Hi
I have been running itunes 7.1 quite successfully until today. Running on windows xp/toshiba laptop.
Problem occurs when i select itunes on desktop, itunes appears on task bar below, after a number of seconds the following error message appears "itunes cannot run because it has detected a problem with your audio configuration", once I click ok on this message itunes terminates.
No changes have been made to my audio configuration (to the best of my knowledge), i can run Windows Media Player and that works fine, so too real player.
I reinstalled itunes, but this did not resolve the problem. I also ran itunes from another logon on my laptop and that presented the same error. I checked all my audio settings in the control panel and also ran the diagnostics on each device and all appears to be fine.
Has anybody faced the same issue, and could anybody advise on any diagnistic tool that could assist in pinpointing the configuration problem?.
Thanks
Toshiba Satellite Windows XP Pro

Hi
Got it resolved, thanks for the prompt responses all!.
Resolved by removal current version of Quicktime thru the control panel (add/remove programs), and then reinstalled from the website.
Phew!
Toshiba Satellite Windows XP Pro

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

Damaged audio configuration

Similar Messages

Maybe you are looking for