Damaged pdf messages

messages on email coming in refuse to download, save, print or edit even when sent as pdf file to this customer

please give me a functional acrobat reader to decipfer, open pdf files the main difficulty of this non functioning program

Similar Messages

I am having trouble with pdf files continuously get damaged file message when try to open downloaded pdf with adobe reader

Cannot open downloaded pdf's with adobe reader. Have latest version of adobe program continuously get damaged file message. Anybody else having this problem? Using imac with osx10.7.1 (latest lion)

I am having the exact same problem. This is very disturbing.
Lately I have been deluged with adobe update dialogues. I don't know whether this is real or some kind of bugus malware phenomenon.
Imagine my surprise when I looked here in the forum and I am not alone.
Kaufmann's remark that we shouldn't be using adobe reader doesn't explain why it is malfunctioning like this. I have been using the reader on Mac OS for years, and I don't get what's happening now.
Does anyone realy know what is going on?

How can I repair damaged pdf files?

I have several hundreds of damaged pdf files and want to repair them. I need to know how to repair them, for example with a software!

Hello Sukrit,
thank you for your reply!
I have deleted the PDF Files and needed to recover them. The size will be shown, but I can't open all of them.
I would like to recover them again or change them again to PDF files, if possible.
With regards,
Stephan
Von meinem iPad gesendet
Am 24.04.2015 um 15:41 schrieb "sukritd15" <[email protected]>:
How can I repair damaged pdf files?
created by sukritd15 in PDF Forms - View the full discussion
Hi Stephan ,
Acrobat is capable of repairing the damaged PDF' ,however it depends on the requirement as to how do you want to repair them.
There could be several reasons that can damage a PDF.
We need to know the cause that has damaged those PDF' and how exactly you want to repair them in order to assist you accordingly .
Regards
Sukrit Dhingra
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7474818#7474818 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7474818#7474818
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in PDF Forms by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Constant 'damaged file message when it isn't

Please help, I have an IMAC, and I just cant seem to get Adobe Reader to work write. Now I get a damaged file message on a PDF both emailed to me anda document I downloaded, when I know for a fact there is nothing wrong with the document at all because it works on my IPAD and PC? HELLLLLLPPP

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Using an early 2011 15 inch macbook pro to watch a rented dvd. the screen displayed a skipping over damaged section message, then the dvd froze. first unable to eject the dvd, now it can't be inserted. Hardware prblm? reset the superdrive?

I was viewing a rented dvd when a "skipping damaged area" message was shown and then the dvd froze. At first I was unable to eject the dvd with the eject botton though the superdrive made "ejecting" noises, and followed the cue "finder using dvd" and ejected it. Now the drive will not accept any dvds. Does this sound like a hardaware problem, or is it possible that some sort of "reset" needs to take place?

Before wasting your time heading to your local Apple Store, try resetting your SMC. It doesn't work all the time, but sometimes it's just the thing to save you time.

Trying to install 10.9 yields "damaged HD message," but disk utility shows everything is fine.

Running mid-2010 MacBook Pro 13'' with OSX 10.7.5.
So, like many who have tried to install the new update, mine says it cannot be installed due to a damaged Macintosh HD. Attempting to fix it through the Disk Utility available during the install allows me to Verify Disk. I get an error that it needs to be repaired, but the repair option is greyed out. Booting it into Recovery and using Disk Utility again shows a damaged disk, but this time I can repair it. It repairs and everything reads as fine; even verifying the disk again shows that the system is fine. This is where it gets screwy.
Upon reboot, the Mavericks install wizard once more gives me the damaged HD message. It once more shows a damaged disk through the Maverick's screen Disk Utility. Booting it into recovery shows the damage again, is fixable again. Rinse, repeat.
Booting into Safe Mode and running Disk Utility shows an undamaged Mac HD. It also allows me to access everything as normal (which is how I am on here now), albeit much more slowly. Additionally, my Boot Camp partition works just fine.
I wouldn't mind abandoning the install, but the Mavericks install will not allow me to boot into my Mac HD because of some error. I also cannot avoid restarting into the Mavericks install wizard unless using Safe Mode. I attempted to delete the downloaded Mavericks "application" in the launch pad, but this does not affect my normal boot, and it appears again the next time I boot into Safe Mode.
I don't know what's wrong with this, but I don't thing it's a hardware issue, because this only affects Mavericks. Can anyone tell me how to either 1) install Mavericks, or 2) banish this **** from whence it came so I can have my computer back? I've been trying to fix this for at least 9 hours, I'm starting to feel rather infuriated.
The only option that I can think of at this point is to reformat and do a clean install of 10.9. Alternatively, maybe just keep 10.9 off my system because it seems to be a POS.

Running mid-2010 MacBook Pro 13'' with OSX 10.7.5.
So, like many who have tried to install the new update, mine says it cannot be installed due to a damaged Macintosh HD. Attempting to fix it through the Disk Utility available during the install allows me to Verify Disk. I get an error that it needs to be repaired, but the repair option is greyed out. Booting it into Recovery and using Disk Utility again shows a damaged disk, but this time I can repair it. It repairs and everything reads as fine; even verifying the disk again shows that the system is fine. This is where it gets screwy.
Upon reboot, the Mavericks install wizard once more gives me the damaged HD message. It once more shows a damaged disk through the Maverick's screen Disk Utility. Booting it into recovery shows the damage again, is fixable again. Rinse, repeat.
Booting into Safe Mode and running Disk Utility shows an undamaged Mac HD. It also allows me to access everything as normal (which is how I am on here now), albeit much more slowly. Additionally, my Boot Camp partition works just fine.
I wouldn't mind abandoning the install, but the Mavericks install will not allow me to boot into my Mac HD because of some error. I also cannot avoid restarting into the Mavericks install wizard unless using Safe Mode. I attempted to delete the downloaded Mavericks "application" in the launch pad, but this does not affect my normal boot, and it appears again the next time I boot into Safe Mode.
I don't know what's wrong with this, but I don't thing it's a hardware issue, because this only affects Mavericks. Can anyone tell me how to either 1) install Mavericks, or 2) banish this **** from whence it came so I can have my computer back? I've been trying to fix this for at least 9 hours, I'm starting to feel rather infuriated.
The only option that I can think of at this point is to reformat and do a clean install of 10.9. Alternatively, maybe just keep 10.9 off my system because it seems to be a POS.

Incorrect structure was found in the PDF message

I have a folder level javascript that creates a custom menu item which when clicked inserts a page at the end of the open document.
Sometimes when executed, a dialog box appears that says "An incorrect structure was found in the PDF file" but the page is inserted anyway.
We work with a lot of documents that have been scanned as a PDF. However, as I said it only occurs with some documents....
Is it just the way they have been scanned? Or is there an error in my script? Or perhaps another explanation?
Could I suppress that particular alert since the page is inserted anyway?
---edit----
I have just checked the script with Acrobat 7.0 and although I don't get the 'Incorrect structure was found in the PDF' message the javascript debugger appears with this message in the console:'Exception in line 19 of function anonymous, script folder-level:App:InsertSummaryPage.js' but once again the page is still inserted anyway.
Here is the javascript I am using to insert a page:
trustedNewDoc = app.trustedFunction(function ()
app.beginPriv(); // Explicitly raise privilege
this.insertPages({nPage:this.numPages-1, cPath:"/C/Program Files/Adobe/Acrobat 7.0/Acrobat/Javascripts/SummaryPage.pdf"});
app.endPriv();
app.addMenuItem({cName:"Insert Summary Page", cParent:"Tools", cExec:"trustedNewDoc()"});
Thanks

Larry – I did what you said and got the form to comply. I combined all the pages and suffered as the software bombed about every third or fourth move I made. For some reason, the form fields work like they should, but the text never goes into the order you want it to. I was having to move the text to the bottom and it would bomb every time I did. I would launch the software again and it would work for about 5 or 6 moves, but every time I moved the text to its proper place in the order, it bombs the program.
But your suggestion was the correct one.
I did get the message that some of the names were the same and I’ve had that happen before. I’ve gotten better at my naming convention. I’m hooked up to a network here and some times when they are doing whatever they do behind the scenes, I’ve had the software not cooperate or not perform optimally.
Our forms here were all built long ago, and the nature of them is to cram as much info onto a page as you can. It’s not uncommon to have 150 – 200 items per page. This makes compliance a real effort.
Thanks again for all your help.
Rob

HT2499 I inserted a brand new DVD and it quit half way through and gave me the "skipping over damaged area" message.

I got this laptop refurbished from Apple in July. It was originally released in October 2011. I have watched DVD's on it previously, but lately, in the past 3 weeks, it's been pooping up the "skipping over damaged area" message. I put in a brand new DVD and half way through, it did it again, and I can't get past it. Any thoughts on what the problem may be?

You can just open Terminal (in Utilities) and run the rm command (make sure you type it exactly) and then reboot. With /.AppleSetupDone gone the system will think it is the the second part of an installation, i.e., after it installs and reboots and starts the Setup Assistant. You will see the Welcome and music all over again and then you can go through the setup prompts again, this time specifying a password.

Unsupported format or damaged files message?

On importing files into CS5 I get the "Unsupported format or damaged files" message. I assume I need the correct Codec? I am on a PC windows 8.1. Anyone know how to solve this?

Hi,
You haven't mentioned the file type. Are you importing through the media browser?
Rename the parent folder that contains the files or try to move the files to a different location and see if that helps.
Thanks,
Rameez

Fixing a damaged PDF

How could be possible to fix a damaged PDF file ? You would letting me know because this is the third time that I am getting stuck within.
Kind regards,
Masoud Mostafaee

Hi Masoud,
There's no way to fix a damaged pdf via Acrobat.
There are though many 3rd party tools available online that might help.

I am unable to read PDF messages in my iPad

I am unable to read PDF messages on my iPad even though I do have the Adobe Reader installed.

Alec
Thank you for your quick response. Nothing happened when I opened it. Just before I posted my concern I registered for Adobe, and voila, I went to my message and it opened. Just think that it was meant to be.
QuiltingPennyBend
Sent from my iPad

Missing or damaged cartridge message

On Photosmart C309g, missing or damaged cartridge message continues to show after all cartridges have been replaced and the contacts have been cleaned. (several times) This has happened before and for whatever reason rectified itself. Any Thoughts??? Thank You

Hi @Stringbass
The issue could be the cartridge(s) or printhead. I found a document that addresses this particular error. I also located another that is for a different issue, the the steps guide you through a manual printhead cleaning which might help. Please use both links below to perform the necessary troubleshooting;
'Ink Cartridge Problem - The Following Ink Cartridge(s) Appear to Be Missing or Damaged' Message Dis...
'Printhead Problem' or 'Printhead Appears to be Missing or Damaged' Message Displays on the Computer
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Damaged Cartridge Message

After replacing one color cartridge because it was low, I keep getting a damaged cartridge message. I replaced the "damaged Cartridge" and the message appears again for a different color OR it says that color is empty.

Hey there @TSterling , welcome back!
I came across your post about the error message you are faced with on your Photosmart Plus, and wanted to share my suggestions with you.
Here are some steps I would recommend:
Power reset:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Also try this guide: 'Printhead Problem' or 'Printhead Appears to be Missing or Damaged' Displays for HP Photosmart Premi...
If the problem continues, give us a call and we can discuss your printer replacement or trade in options with HP as you would need a new unit.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Damaged .pdf file when exporting / printing

Post Author: darrens
CA Forum: Exporting
Hi,
I scoured Google, these forums, and Crystal support but haven't found a solution to my issue.
I have a Crystal report (version XIR2) served from an Enterprise server. I also have a ASP.NET C# application that calls and runs this report in a DHTML CrystalReportViewer. The actual report runs just fine.
Clicking the print button in the report viewer's top toolbar causes the viewer to attempt to export the report to a .pdf, from where you can actually print it. This is where my problem lies! When Adobe Reader opens and attempts to open the temporary .pdf file generated from the viewer, I get the message "Adobe Reader could not open 'filename.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)." This also happens when trying to export the report directly into PDF format. Everyone who would run this report, including me, is using Adobe Reader 8.1.
Exporting to other file formats seems to work just fine. Excel and Word have no problems.
Also, interestingly enough, exporting to PDF and trying to print in Internet Explorer 7 works just fine! These problems seem to only occur in IE6. Unfortunately, it is not possible for us to use IE7 yet, so we are stuck with IE6. Additionally, we are stuck using the DHTML viewer, so other viewers, like the ActiveX or Java viewers, are not options for me.
I had found some articles in Business Object support saying this problem was related to WebSphere, and there were various solutions I found related to that. However, WebSphere isn't used anywhere in our organization, so this problem must be stemming from elsewhere.
Anyone have any ideas? Thanks in advance for taking the time to read / reply to this thread. If anyone needs more information, feel free to ask!
Thanks,Darren

Post Author: fyz
CA Forum: Exporting
Hi,
I think your pdf file is probably damaged. There is a tool called Advanced PDF Repair. I have used it to repair many corrupt PDF files successfully. Its homepage is http://www.datanumen.com/apdfr/ Maybe you can have a try.
Alan

How to resolve damaged PDF file (via GUI_DOWNLOAD)

Dear forumers,
I am having problems with the GUI_DOWNLOAD method for downloading PDF files to the presentation server.
The SY-SUBRC code is 0, and the PDF file gets downloaded and saved in the presentation server.
However, opening any PDF files would be unsuccessful due to the error message that the file is damaged.
Text files on the other hand, are fine.
What could be wrong here, and how can I resolve this issue?
Appreciate any inputs here at all.
Many thanks.
P/S:
I had earlier tried this with GUI_DOWNLOAD FM, but with the same results as well - the issue still persists.
Attached here is the screenshot of the error message when opening a PDF file.

Codes extract:-
*&      Form download_all_attachments
*       Download all attachments
FORM download_all_attachments .
DATA: lv_obj        TYPE swotobjid-objkey.
DATA: lv_instid     TYPE sibfboriid.
DATA: lv_classname TYPE bapibds01-classname.
DATA: lv_fol_id     TYPE soodk.
DATA: lv_doc_id     TYPE soodk.
DATA: lv_filename   TYPE string.
DATA: lv_path       TYPE string.
DATA: lv_fullpath   TYPE string.
DATA: lv_path_tmp   TYPE string.
DATA: lv_result     TYPE i.
DATA: lv_sapusr_dir TYPE sdok_chtrd.
DATA: lv_directory TYPE string.
DATA: lwa_srgbtbrel TYPE srgbtbrel.
DATA: lwa_conn      TYPE bdn_con.
DATA: lwa_errormsg TYPE iwerrormsg.
DATA: lt_srgbtbrel TYPE STANDARD TABLE OF srgbtbrel.
DATA: lt_conn       TYPE STANDARD TABLE OF bdn_con.
DATA: lt_conn_tmp   TYPE STANDARD TABLE OF bdn_con.
DATA: lt_objcont    TYPE STANDARD TABLE OF soli.
FIELD-SYMBOLS: <lwa_final> TYPE zfidocattach.
CONSTANTS: lc_attach_field TYPE slis_fieldname VALUE 'ATTACH'.
CONSTANTS: lc_temp_path    TYPE string         VALUE 'C:\temp'.
CONSTANTS: lc_separate(1) TYPE c              VALUE ';'.
CONSTANTS: lc_period(1)    TYPE c              VALUE '.'.
LOOP AT gt_final ASSIGNING <lwa_final>.
    CLEAR: lv_obj, lv_instid, lv_classname,
           lt_srgbtbrel, lt_conn, lwa_srgbtbrel.
    CONCATENATE <lwa_final>-bukrs <lwa_final>-belnr <lwa_final>-gjahr
           INTO lv_obj.
    lv_instid = lv_obj.
    SELECT *
      FROM srgbtbrel
      INTO TABLE lt_srgbtbrel
     WHERE reltype = lc_attachment_rel
       AND instid_a = lv_instid
       AND catid_a = lc_borobj_ctgy.
    SORT lt_srgbtbrel BY typeid_a.
    DELETE ADJACENT DUPLICATES FROM lt_srgbtbrel
      COMPARING typeid_a.
    LOOP AT lt_srgbtbrel INTO lwa_srgbtbrel.
      CLEAR lt_conn_tmp.
      lv_classname = lwa_srgbtbrel-typeid_a.
      CALL FUNCTION 'BDS_GOS_CONNECTIONS_GET'
        EXPORTING
          classname          = lv_classname
          objkey             = lv_obj
          client             = sy-mandt
        TABLES
          gos_connections    = lt_conn_tmp
        EXCEPTIONS
          no_objects_found   = 1
          internal_error     = 2
          internal_gos_error = 3
          OTHERS             = 4.
      APPEND LINES OF lt_conn_tmp TO lt_conn.
      CLEAR: lwa_srgbtbrel, lv_classname.
    ENDLOOP.
    LOOP AT lt_conn INTO lwa_conn.
      MOVE lwa_conn-loio_id TO lv_fol_id .
      MOVE lwa_conn-loio_id+17(25) TO lv_doc_id .
      CALL FUNCTION 'SO_OBJECT_READ'
        EXPORTING
          folder_id = lv_fol_id
          object_id = lv_doc_id
        TABLES
          objcont   = lt_objcont.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION 'IW_C_GET_SAPWORKDIR'
        IMPORTING
          sapworkdir = lv_sapusr_dir
          error_msg = lwa_errormsg.
      IF sy-subrc = 0.
        lv_directory = lv_sapusr_dir.
      ELSE.
        lv_directory = lc_temp_path.
      ENDIF.
      CONDENSE lv_directory.
* Filename format:
* Company code;YYMM(posting Date);Document number;Attach File name.ext
      CONCATENATE <lwa_final>-bukrs lc_separate
                 <lwa_final>-budat(4) <lwa_final>-budat+4(2) lc_separate
                 <lwa_final>-belnr lc_separate
                 lwa_conn-descript lc_period lwa_conn-docuclass
        INTO lv_filename.
      IF lv_path IS INITIAL.
* Display save dialog window
        CALL METHOD cl_gui_frontend_services=>file_save_dialog
          EXPORTING
            default_extension = 'ASC'
            default_file_name = lv_filename
            initial_directory = lv_directory
          CHANGING
            filename          = lv_filename
            path              = lv_path
            fullpath          = lv_fullpath
            user_action       = lv_result.
        IF sy-subrc <> 0 OR
           lv_result <> cl_gui_frontend_services=>action_ok.
          EXIT.
        ENDIF.
        CHECK lv_result EQ '0'.
      ELSE.
        CLEAR: lv_path_tmp, lv_fullpath.
        lv_path_tmp = lv_path.
        CONCATENATE lv_path_tmp lv_filename
          INTO lv_fullpath.
      ENDIF.
      CALL METHOD cl_gui_frontend_services=>gui_download
        EXPORTING
*          bin_filesize              =
          filename                  = lv_fullpath
          filetype                  = 'ASC'
*          APPEND                    = SPACE
*          write_field_separator     = 'X'
*          HEADER                    = '00'
*          TRUNC_TRAILING_BLANKS     = SPACE
*          WRITE_LF                  = 'X'
*          COL_SELECT                = SPACE
*          COL_SELECT_MASK           = SPACE
*          DAT_MODE                  = SPACE
*          CONFIRM_OVERWRITE         = SPACE
*          NO_AUTH_CHECK             = SPACE
*          CODEPAGE                  = SPACE
*          IGNORE_CERR               = ABAP_TRUE
*          REPLACEMENT               = '#'
*          WRITE_BOM                 = SPACE
*          TRUNC_TRAILING_BLANKS_EOL = 'X'
*        IMPORTING
*          FILELENGTH                =
        CHANGING
          data_tab                  = lt_objcont
        EXCEPTIONS
          file_write_error          = 1
          no_batch                  = 2
          gui_refuse_filetransfer   = 3
          invalid_type              = 4
          no_authority              = 5
          unknown_error             = 6
          header_not_allowed        = 7
          separator_not_allowed     = 8
          filesize_not_allowed      = 9
          header_too_long           = 10
          dp_error_create           = 11
          dp_error_send             = 12
          dp_error_write            = 13
          unknown_dp_error          = 14
          access_denied             = 15
          dp_out_of_memory          = 16
          disk_full                 = 17
          dp_timeout                = 18
          file_not_found            = 19
          dataprovider_exception    = 20
          control_flush_error       = 21
          not_supported_by_gui      = 22
          error_no_gui              = 23
          OTHERS                    = 24.
      IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
*      CALL FUNCTION 'GUI_DOWNLOAD'
*        EXPORTING
*          filename              = lv_fullpath
*          filetype              = 'ASC'
**          append                = 'X'
*          write_field_separator = 'X'
**          confirm_overwrite     = 'X'
*        TABLES
*          data_tab              = lt_objcont
*        EXCEPTIONS
*          file_open_error       = 1
*          file_write_error      = 2
*          OTHERS                = 3.
      CLEAR lwa_conn.
    ENDLOOP.
ENDLOOP.
ENDFORM.                    " download_all_attachments

Damaged pdf messages

Similar Messages

Maybe you are looking for