Damages sound of my movies after exporting, whatever the format ? any idea ?

Hello guys, every project I export (whatever the final destination : quick time, mac, Ipad, etc) comes out with a movie with a damaged sound for the whole movie. Basically, I use unprotected music from AAC or MP3 files, perfectly red in the orginal project. I checked the sound issues for every part (the green tip) and they are always valid. For information, video is great in the meantime.
As I'm a new on FCPX, maybe I missed a parameter or ....
Can you help ?
Thanx

Works perfectly, thanks.
I realize the "Imovie look like design" isn't really appropriate as lots of media (pictures, sounds) should be converted specifically for FCPX.....

Similar Messages

Issues between mac and iPad: after resetting my mac i can't synchronize new movies downloaded in the iTunes store from my mac to the iPad. any idea what to do?

Hi, I cant synchronize moves downloaded from the store to my mac with the Ipad anymore after I had to reset the mac. It works for older movies still but not for new ones. I cant watch them on the mac but they just dont synchronize with the ipad. any idea?

What happenes when you try?
Error message?
What does it say?

HT1766 Have sound only with headphones after apples new IOS install, any help would be appreciated.

Have sound only with headphones after apple latest iOS install, any help out there?

http://support.apple.com/kb/TS2802

After updating mini ipad to ios7 the sounds are very bad. Kind of distortion. Any idea?

After updating mini ipad to ios7 the sounds are very bad. Kind of distortion. Any idea?

Found it myself.
Restore settings + restart device fixes the problem.

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

Take a look here:
http://support.microsoft.com/kb/953266
If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
Regards.

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

If You are trying to watch content when you are downloading, it let it download then watch it this works for me as i had the same problem.

I have mavericks installed. my safari crush since this morning. to use it again i have to close the program and reopen it. after few clicks crushes again. any idea?

i have mavericks installed.
my safari crush since this morning (I can not scroll between pages, if I try to reopen the page, safari open in exactelly same point is blocked).
to use it again i have to close the program and reopen it. after few clicks crushes again. any idea?

Quit the application. Force quit if necessary.
Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data

Iphone 4s is slow scrolling though pages after exiting setting, 3sec lag, any ideas how to fix?

Iphone 4s is slow scrolling though pages after exiting setting, 3sec lag, any ideas how to fix?

I have the same issue on mine...

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

Using the Cyclops speed camera app, the sound on my iPhone 4s switches off after a few minutes. Any ideas?

when using the Cyclops speed camera app the sound on my iPhone 4s switches off after a short while. If I close the app and reopen it, there's still no sound. If I restar the phone and open Cyclops I get sound "welcome to Cyclops" or whatever the greeting is. Has anyone got any ideas?

I've taken several Express devices apart in the past to experiment with them. The internal components warm up quite a bit in the first 10-15 seconds. They continue to heat up after this. It takes 3-4 minutes or so before the heat transfers to the outer case for dissipation.
Nothing is certain, but I'm 95% sure that this is your issue. But, trying to find a microscopic break in a circuit board trace is, as I mentioned, a real longshot. If you have the time and have done things like this before, it might be worth a shot.
I guess the bottom line is that even if this is not the issue, the device will still need to be replaced since Apple does not offer repairs. There are no software or firmware fixes for somthing like this.

I have an ipad with 8.1.1 software. I lost my thumbnails on my movies after one of the system updates but not sure which one since I don 't look at the movies that often.

I have an ipad running 8.1.1. I lost all of my movie thumbnails after one of the system updates, but I'm not sure which one since I don't look at the movies that ofter.How do I restore my thumbnails. They are fine in itunes on my imac that I sync with.

onix_76 wrote:
how come? Documents also have on hand to buy as photo and check the box
So what? The second-hand shop you bought it from didn't follow the right procedures. You also didn't follow the right procedures to make sure that iPhone was not in Activation Lock. It's like buying a car for cash but not getting the title signed over to you. It's not your car if you don' have the title. And that's not legally your iPhone if the previous owner's Apple ID is still registered to the device for Find My iPhone/Activation Lock.
Only a proof of purchase from the ORIGINAL retail store would do any good at all. Return the device to where you bought it and demand your money back. If they refuse, either get a lawyer and/or turn in the device to local police. If you're in possession of stolen property, then the cops won't care about where you got it from.

Change in report format after exporting from pdf format to excel format.

Hi,
I got a problem while exporting the pdf format of the Report to Excel format "Fully-Foramtted Grids and Texts".
The format gets automatically changed.
Is there any solution to this problem.

Can you give some more details?
Which version are you using (and which patch level - if any).
Also what formatting is default on the reports and what is the default format in excel.
What exactly is different between PDF and excel?
Another possibility is that font substitution is going on??

I am having trouble using reverb of any kind; it does not sound natural, but rather "pixilated." Does anyone have any ideas for a solution? I have used Silververb and Space Designer and am having the same problem...

I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!

This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way.

Ball of death after 10.5.8 upgrade, any ideas why?

Gidday all
I have just upgraded to 10.5 and then to 10.5.8 doing a archive and install, after this upgrade my mac starts, shows the login screen, I enter my password, and the login process starts, this is where the problem starts, most of the time the dock will appear, but no menu bar at the top of the screen, and no drives (two internal drives) shown on the desktop, then the ball of death just sits their for ever, i can move my mouse around freely, but thats about it, if i hold the ball of death over an icon in the dock it turns back into a black pointer, then if I say click on a icon in the dock, the icon stays selected and dimmed and no application activation happens, after this I cannot select anything, and the ballremains.
I managed to create another user account (eventually) and successfully logged into it, everything started and showed and worked as it should in this account, yet if I try going back to my other account the problems start all over.
I reinstalled 10.5 and this seemed to work ok, then I applied the 10.5.8 update again, and basically the above repeated it's self.
My mac isn't making any fan noises like the processor is trying to do something, and im working on the test user account to send this post
i'm stumped, has anybody got any ides about what may be going on?
cheers
Budgie
Message was edited by: Budgie
forgot tot mention, this update was done using the combo updater, on G5 PPC

I have managed to get the system prefs window open and navigate around the different features with out a problem, thing is my volumes still do not show on the desktop.
Some other interesting things are happening also, say I click on a folder in the dock, it opens up to reveal in a nice blackish looking window and a view of all the other folders with in, it gives me an option to click a button that says "reveal in finder" I click that and the window collapses and nothing happens, I would expect it to show in columns or something like that. I am also experiencing repeated dialogs (6 to 10) being thrown up saying "The Application "Finder" cannot be launched -1712, plus the continual spinning of the ball of gloom.
So im thinking their is a serious issue with the finder, of which I have trashed the plst, any thoughts?
Budgie

Damages sound of my movies after exporting, whatever the format ? any idea ?

Similar Messages

Maybe you are looking for