Daño de la cámara frontal lo cubre la garantía ?

Que hago si no me sirve la cámara frontal no me toma fotos , sale negra o se ve la sombra de la foto con la cámara trasera y esto lo cubre la garantía

Google translate:
What do I do if I can not use the front camera not taking pictures, black out or is the shadow of the picture with the camera back and this covered by warranty
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings      
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up                                                                
- Restore to factory settings/new iOS device.             
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
  Apple Retail Store - Genius Bar              
If the Ipod has not been abused Apple will exchange it at no cost under your warranty

Similar Messages

  • La cámara frontal de mi iPod 5 no abre ya intente todo restablecer, restaurar todo y sigue igual :/

    Simplemente no abre la cam e intentado todo que puedo hacer a donde lo llevo o como?

    tengo el mismo problema. No se si es un problema generalizado del nuevo ipod 5 y si apple tiene alguna recomendación al respecto. En mi caso funcionó 1 mes y de pronto dejo de funcionar quedando el obturador cerrado y tardando muchos minutos en volver a dar la opción de elegir la cámara frontal.

  • La Cámara frontal de mi Ipod 5 no abre

    Hola a todos , tengo un Ipod 5 y desde varias semanas la camara frontal del Ipod no abre , Ya intente restaurarlo , cerrar aplicaciones , eliminar datos pesados ,, etc , pero nada lo soluciona , lo que aparece es como que se va a abrir pero nunca abre , la camara trasera funciona perfectamente !!

    Google translate:
    Hi all, I have an Ipod 5 and for several weeks the front cam of the Ipod does not open, already try restore, close applications, remove heavy data, etc, but nothing helps, what appears is like to be open but never opened, the rear camera works perfectly!
    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store or contact a Apple Authorized Service Provider
    Apple Retail Store - Genius Bar

  • Hace como 1 mes no me anda la cámara frontal, que hago?

    hace como 1 mes no me anda la camara frontal del iPhone 5c, nose que hacer, hice de todo menos resetear el celular, me empezo a andar mal con la actualizacion del software, espere a la otra actualizacion para ver si funcionaba pero nada

    Google translate:
    Sorry, the front camera of minimum 5 does not work, I've dropped, or wet, and can not do.
    I do?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    If not covered by warranty
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. Make sure y select our country
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    FIx the iPod yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • La cámara trasera del iPhone 5s dejó de funcionar pero la frontal funciona, ¿qué hago?

    La cámara trasera del iPhone 5s dejó de funcionar pero la frontal funciona, ¿qué hago? Sin motivo alguno, ni golpe, ni humedad, nada. Simplemente dejó de funcionar, pero la cámara frontal, sin embargo funciona perfectamente tanto en la app iOS nativa como en las app instaladas, instagram, facebook, twitter, etc. Como puedo solucionarlo? Gracias.

    To make sure that this is not software related, set it up as new device, without using the latest backup, explained in this article:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If this does not work, your phone has to be serviced by Apple or an Authorized Apple Service Provider:
    iPhone - Contact Support - Apple Support

  • Cámara trasera no funciona - iPhone 5s

    Hace días e intentado tomar fotos de mi iphone, y cuando abro la app, se queda congelado o en negro, aveces funciona la cámara frontal o sino aparece de cabeza. Nose si sera un fallo del sistema operativo o del hardware.

    Me pasó lo mismo y pensé que tenía que llevarlo a reparar porque no funcionaba ni reseteándolo.
    Al final probé a activar la restricción de la cámara en el menú de restricciones, dentro de general. Probé algunas apps de fotos, apareciendo un mensaje de que no existía la cámara, y después quité otra vez la restricción y empezó a funcionar como siempre.
    Yo me imagino que fue un bug del sistema que tenía bloqueada la cámara, y por eso ni reseteándolo funcionaba. Al poner y quitar la restricción se debió desbloquear y como nuevo.
    Espero que te sirva, aunque ya pasó bastante tiempo desde tu post.
    Saludos!

  • Por qué no puedo usar Retrica en mi iPod touch 5

    El problema es que, hace días compré el iPod Touch 5th generación de 16 GB, descargue "CamWow" y "Retrica". Entro a Retrica, la pantalla está en blanco, no me puedo tomar una foto, mi iPod sólo tiene cámara frontal, no sé cómo tomar fotos, si puedo poner una y editarla, pero no se puede guardar. No me digan que es sólo con pago, porque ya investigué y eso no es. No me digan que es porque le bajo muchas aplicaciones y no procesa bien, ya le quité muchas y todavía no sirve Retrica. ¿Qué otra cosa puede ser? Espero respuestas, gracias.

    Goolge translate:
    The problem is that a few days ago I bought the iPod Touch 5th generation 16 GB, download "CamWow" and "rhetoric". Activity to rhetoric, the screen is blank, I can not take my picture, my iPod only has front camera, do not know how to shoot, and if I can add a edit, but can not save. Do not tell me it's only payment, because that is not researched and. Do not tell me it's because under many applications and will not process well, and I took a lot of rhetoric and not yet served. What else can it be? I hope answers, thanks.
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Errores iphone 5

    Hola , escribo por que me compre un iphone 5 , hace unos días ... y tengo fallos como
    tarda 2 a 3 minutos en encontrar la tarjeta sim
    cuando pongo el telefono a cargar no puedo poner los auriculares o da error en el ordenador
    aveces no reconoce el dispositivo
    la bateria dura muy poco
    no me deja coger el telefono cuando llaman
    el dispositivo se apaga o reinicia solo
    gracias
    Hello, I write because I buy an iPhone 5, a few days ago ... and I have faults as
    takes 2-3 minutes to find the SIM card
    when I put the phone to charge I can not put the headphones or the computer fails
    sometimes does not recognize the device
    The battery lasts a very short
    will not let me pick up the phone when they call
    the device is turned off or rebooted only
    thks

    Eso es raro, a una amiga mía le pasó y resulta que era la cámara frontal, le pasó después de cambiar la pantalla en una tienda, asi que ya sabes, abre el teléfono y desconecta la cámara frontal. Puede que te funcione. De donde eres ¿?

  • MARA-GEWEI is not overtaken during creation of material from cdesk

    Hi, we work in ENV SAP R3 4.71 and create material in background out from
    cdesk.
    Therefore we defined in the customizing of CAD Desktop that in case of
    creation of material MARA-GEWEI determination type = constant and
    determination parameter is "ST" for "piece"
    Every other parameter works fine during creation of material ==> as soon as
    we fill a weight into the corresponding fields SAP tells us a message
    "ENTER the unit of weight for the net weight" ==> if you press "continue action then" SAP ends creation of material an nothing happens....
    ANY ideas?
    (will enter this message for sure as well into the oss....)

    Hi  Gerhard,
    have u put
    EXP_MARA-BRGEW           Gross weight
    EXP_MARA-NTGEW            Net weight
    from Inv side in config...
    Also check in cdesk_cus under create material
    <b>Base Unit of Measure               Constant     ST
    Net Weight               File Attribute     Physical_Properties_MassValue</b>
    hope this helps

  • In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

    In PDF to Excel conversion dates like 03/12/15 convert to Dec 3rd 2015 not the correct date of Mar 12th 2015 whereas date 03/13/2015 converts correctly as March 13th 2015

    Hi DirTech,
    Are both of these dates in the same Excel file? If they're in different files, are you choosing the same language for OCR (optical character recognition)?
    If they are in the same PDF file, how was that PDF file created? Was it created from a third-party application (rather than an Adobe application)? If it was created by a third-party application, it could be that it wasn't written to spec, and that's why you're seeing some oddities in the PDF > Excel conversion.  (See Will Adobe ExportPDF convert both text and form... | Adobe Community.)
    Best,
    Sara

  • Virgo Tools for Eclipse Luna and Mars

    Hi all,
    I tried to install the Virgo Tools both in Eclipse Luna and in Mars (JEE packages), from this update site:
    "Virgo IDE Releases" - http://download.eclipse.org/virgo/release/tooling
    - Eclipse Virgo Tools 1.0.1.201302270038-RELEASE
    but I got errors (see below).
    Instead all il working well with Kepler.
    Some suggestions?
    Thank you very much.
    Vincenzo
    ================================================
    Cannot complete the install because of a conflicting dependency.
    Software being installed: Eclipse Virgo Tools 1.0.1.201302270038-RELEASE (org.eclipse.virgo.ide.feature.feature.group 1.0.1.201302270038-RELEASE)
    Software currently installed: Eclipse IDE for Java EE Developers 4.5.0.20150621-1200 (epp.package.jee 4.5.0.20150621-1200)
    Only one of the following can be installed at once:
    OSGi System Bundle 3.8.1.v20120830-144521 (org.eclipse.osgi 3.8.1.v20120830-144521)
    OSGi System Bundle 3.10.100.v20150529-1857 (org.eclipse.osgi 3.10.100.v20150529-1857)
    Cannot satisfy dependency:
    From: Eclipse IDE for Java EE Developers 4.5.0.20150621-1200 (epp.package.jee 4.5.0.20150621-1200)
    To: org.eclipse.epp.package.jee.feature.feature.group
    Cannot satisfy dependency:
    From: EPP Java EE IDE Feature 4.5.0.20150621-1200 (org.eclipse.epp.package.jee.feature.feature.group 4.5.0.20150621-1200)
    To: org.eclipse.m2e.feature.feature.group 0.0.0
    Cannot satisfy dependency:
    From: Maven Integration for Eclipse 1.6.0.20150526-2032 (org.eclipse.m2e.core 1.6.0.20150526-2032)
    To: bundle org.eclipse.osgi 3.10.0
    Cannot satisfy dependency:
    From: m2e - Maven Integration for Eclipse (includes Incubating components) 1.6.0.20150526-2032 (org.eclipse.m2e.feature.feature.group 1.6.0.20150526-2032)
    To: org.eclipse.m2e.core
    Cannot satisfy dependency:
    From: Eclipse Virgo Tools 1.0.1.201302270038-RELEASE (org.eclipse.virgo.ide.feature.feature.group 1.0.1.201302270038-RELEASE)
    To: org.eclipse.virgo.ide.manifest.core [1.0.1.201302270038-RELEASE]
    Cannot satisfy dependency:
    From: Eclipse Virgo IDE (Manifest Core) 1.0.1.201302270038-RELEASE (org.eclipse.virgo.ide.manifest.core 1.0.1.201302270038-RELEASE)
    To: bundle org.eclipse.virgo.kernel.artifact 0.0.0
    Cannot satisfy dependency:
    From: Virgo Kernel Artifact Integration 3.6.0.RELEASE (org.eclipse.virgo.kernel.artifact 3.6.0.RELEASE)
    To: package org.eclipse.virgo.nano.serviceability [3.6.0,3.7.0)
    Cannot satisfy dependency:
    From: Virgo Nano Core 3.6.0.RELEASE (org.eclipse.virgo.nano.core 3.6.0.RELEASE)
    To: package org.eclipse.osgi.internal.baseadaptor 0.0.0

    Sorry, I have to correct myself: today I retried with a brand new Mars/JEE+Java8 and a brand new workspace:
    the error is related to missing org.json bundle.
    Cannot complete the install because one or more required items could not be found.
    Software being installed: Eclipse Virgo Tools 1.0.1.201506260038-SNAPSHOT (org.eclipse.virgo.ide.feature.feature.group 1.0.1.201506260038-SNAPSHOT)
    Missing requirement: Eclipse Virgo IDE (Server Core) 1.0.1.201506260038-SNAPSHOT (org.eclipse.virgo.ide.runtime.core 1.0.1.201506260038-SNAPSHOT) requires 'bundle org.json 0.0.0' but it could not be found
    Cannot satisfy dependency:
    From: Eclipse Virgo Tools 1.0.1.201506260038-SNAPSHOT (org.eclipse.virgo.ide.feature.feature.group 1.0.1.201506260038-SNAPSHOT)
    To: org.eclipse.virgo.ide.runtime.core [1.0.1.201506260038-SNAPSHOT]
    seems like Mars/JEE doesn't contain org.json ... which is quite strange ...
    With Mars/JEE+Java7 instead the detailed error is:
    Cannot complete the install because one or more required items could not be found.
    Software being installed: Eclipse Virgo Tools 1.0.1.201506260038-SNAPSHOT (org.eclipse.virgo.ide.feature.feature.group 1.0.1.201506260038-SNAPSHOT)
    Missing requirement: OSGi Framework Editor UI (Incubation) 0.2.0.201206060754 (org.eclipse.libra.framework.editor.ui 0.2.0.201206060754) requires 'bundle org.eclipse.zest.core [1.0.0,2.0.0)' but it could not be found
    Missing requirement: OSGi Framework Editor UI (Incubation) 0.3.0.201212132137 (org.eclipse.libra.framework.editor.ui 0.3.0.201212132137) requires 'bundle org.eclipse.zest.core [1.0.0,2.0.0)' but it could not be found
    Missing requirement: OSGi Framework Editor UI (Incubation) 0.3.0.201305070844 (org.eclipse.libra.framework.editor.ui 0.3.0.201305070844) requires 'bundle org.eclipse.zest.core [1.0.0,2.0.0)' but it could not be found
    Missing requirement: OSGi Framework Editor UI (Incubation) 0.3.0.201305151323 (org.eclipse.libra.framework.editor.ui 0.3.0.201305151323) requires 'bundle org.eclipse.zest.core [1.0.0,2.0.0)' but it could not be found
    Missing requirement: OSGi Framework Editor UI (Incubation) 0.3.0.201305311343 (org.eclipse.libra.framework.editor.ui 0.3.0.201305311343) requires 'bundle org.eclipse.zest.core [1.0.0,2.0.0)' but it could not be found
    Missing requirement: OSGi Framework Editor UI (Incubation) 0.3.1.201405141436 (org.eclipse.libra.framework.editor.ui 0.3.1.201405141436) requires 'bundle org.eclipse.zest.core [1.0.0,2.0.0)' but it could not be found
    Cannot satisfy dependency:
    From: Eclipse Virgo Tools 1.0.1.201506260038-SNAPSHOT (org.eclipse.virgo.ide.feature.feature.group 1.0.1.201506260038-SNAPSHOT)
    To: org.eclipse.virgo.ide.runtime.ui [1.0.1.201506260038-SNAPSHOT]
    Cannot satisfy dependency:
    From: Eclipse Virgo IDE (Server UI) 1.0.1.201506260038-SNAPSHOT (org.eclipse.virgo.ide.runtime.ui 1.0.1.201506260038-SNAPSHOT)
    To: bundle org.eclipse.libra.framework.editor.ui 0.0.0
    With Luna/JEE SR2 instead all is working well, both with Java7 and Java8
    Vincenzo

  • Can not store data to append structure in mara

    Hi
    after make the following steps, I have problem, please give me some tips. thanks
    1, Append structure Zcode in MARA.
    2, Created a ZMGD1 via SE80 copy from function group MGD1.
    3, modify screen 0001, put this Zcode in this screen and FC MARA-Zcode.
    4, change SPRO, specify new program SAPLZMGD1 for this screen 0001.
    after these steps, I can find out this new field (Zcode) appear in MM02.
    but, the data of Zcode can not be store in MARA.

    Hi:
    the exactly problem is I don't know how to read this screen field value, and how to transfer to wmara-Zcode.
    anybody can help me?
    thanks
    Henry

  • Can we view Color & SIZE1 field from MARA in MM43??

    Can we view Color & SIZE1 field from MARA in MM43??

    Hi Ashish,
    In MM43 on Basic data screen scroll down to see More Basic Data push button.
    Once you enter in More Basic Data screen you have field there for size/dimension.
    I'm not sure if this is what you are looking for.
    Thanks,
    Vikrant.

  • Campo vAFRMM para transporte Marítimo - NFE 3.10

    Olá Pessoal,
    Para NFE 3.10, é exigida a tag vAFRMM quando há transporte marítimo.
    AFRMM = Adicional de Frete para Renovação da Marinha Mercante.
    O problema é que nas transações de NFe, esse campo aparece como cabeçalho e no XML aparece como item. O valor no XML para os itens, aparece REPLICADO com o valor do cabeçalho (MarFrete).
    Alguém conseguiu resolver esse problema?
    O mesmo foi corrigido por nota da SAP ou o rateio ocorreu na BADI mesmo?
    Procurei até controle de tela para abrir esse campo nos itens, mas não encontrei nada.
    Agradeço desde já qualquer informação,
    Paulo Henrique

    Oi Paulo
    Esse campo é preenchido via BadI. Ou seja, necessário verificar o desenvolvimento interno.
    Abraço
    Eduardo Chagas

  • Unable to update MARA table custom field in Material master

    Hi all,
    I have added one custom field in MM01,Basic View 2.
    For that i have apended that field in MARA table and created one subscreen for that.
    This field is visible in MM02/MM01/MM03 in basic data view 2 .
    The issue is that we are not able to save values in MARA table which we entered in this field.
    I cheked earliar in SDN but couldn't get the proper solution.
    i cheked the below available forum discussion link but couldn't get th proper solution.
    In material master How to add a new field on Basic data 1 view
    Regards,
    Amit

    Hi,
    please trye this :
    Please make sure u implemented: methods PUT_DATA_TO_SCREEN and GET_DATA_FROM_SCREEN as they are  required for data transport. These methods are called from within the program of the application at PBO or PAI .
    See below example code:
    PBO:
    MODULE initialize OUTPUT.
    CLEAR: sflight, ok_code.
    IF exit IS INITIAL.
    CALL METHOD cl_exithandler=>get_instance
    CHANGING
    instance = exit.
    ENDIF.
    CALL METHOD cl_exithandler=>set_instance_for_subscreen
    EXPORTING
    instance = exit.
    ENDMODULE.
    The factory method is used to create an instance of the adapter class. You then declare the instance using the public static method SET_INSTANCE_FOR_SUBSCREEN to allow the data for display on the screen to be used in the function group of the user or in the module pool.
    MODULE data_for_subscreen OUTPUT.
    program = sy-repid.
    dynpro = sy-dynnr.
    CALL METHOD cl_exithandler=>get_prog_and_dynp_for_subscr
    EXPORTING
    exit_name = 'BADI_SCREEN'
    calling_program = program
    calling_dynpro = dynpro
    subscreen_area = 'SUB'
    IMPORTING
    called_program = program
    called_dynpro = dynpro.
    CALL METHOD exit->put_data_to_screen
    EXPORTING
    flight = sflight
    EXCEPTIONS
    reserved = 01.
    ENDMODULE.
    PAI:
    MODULE user_command_0200 INPUT.
    CASE save_ok.
    WHEN 'BACK'.
    SET SCREEN 100.
    WHEN 'SAVE'.
    PERFORM save_flights.
    WHEN '+EXT'.
    CALL METHOD exit->get_data_from_screen
    IMPORTING
    flight = sflight
    EXCEPTIONS
    reserved = 01.
    ENDCASE.
    ENDMODULE.
    The method GET_PROG_AND_DYNP_FOR_SUBSCR and the input/output parameters specified above are used to determine the name of the customer program and the name of the subscreen. The method PUT_DATA_TO_SCREEN which is called at PBO as well as the method GET_DATA_FROM_SCREEN which is called at PAI are used to transport the data to be displayed.
    These methods are implemented by the user:
    When you define a screen enhancement, you are strongly recommended to provide sample code for the methods PUT_DATA_TO_SCREEN and GET_DATA_FROM_SCREEN. This code is automatically copied when you create an implementation and can be added to if required. The user of the BAdI definition should not be responsible for the data transport.
    regards,
    ..Pradeep

Maybe you are looking for

  • Windows Xp sound driver for Presario A 975em

    I just downgraded my Os from Vista to Xp and i cant find any sound driver for my Notebook pls help.I about Compaq Presario A975em Thanks in advance. Best regards

  • Can I Install OS X from a USB drive

    Can I Install OS X from a USB drive

  • Imovie won't preview in iDVD

    I have Shared a small iMovie 09 project via Media Browser.  I am trying to burn it to a DVD using iDVD 09 where it will play immediately. I drag it into the theme window but it doesn't play when I press the preview button. This should be simple.  Wha

  • Join VOs to display in a OATable or Adv (no Detail!).

    Hi all, I need a litle help again... My scenario: (Example) VOs: - Car - Model - Color - Extra Color I have VLs, Car to Model, Car to Color and Color to Extra Color. In a search page (table result), I need show attributes from Car, Model, Color and E

  • K8T Neo - no boot from CD/DVD

    I have a K8T Neo FSR board, with 512 MB, one 250 GB ATA hard drive and a DVD writer/drive. It refuses to boot from the DVD drive. I've done all the standard things - going into BIOS, checking its boot order, disabling the SATA drives, even slowing th