Daq do not appear at measurement i/o

I've just instaled My DAQ6009 and my labview, and the DAQ do not appear at measurement I/O on labview functions palet. It was working before when was instaled at my old computer.
The daq6009 is appearing at MAX tree.
Does anyone knows what can be happening?
thank you
Solved!
Go to Solution.

What version of LV are you using?
You must install NI DAQmx driver so you can use your device.
The link below has this driver so you can download and install it.
http://joule.ni.com/nidu/cds/view/p/id/2337/lang/en
Thanks.
Best Regards
Luciano Borges
R&D Engineer
Pirelli Brazil

Similar Messages

SEM Measure Builder - dataSource values are not appearing in measures

Dear Experts
we recently upgraded our SEM system from 4.0 to 6.0. I am getting few problems in measure builder catelouge entries. when i checked the measures in measure catalouge the datasource tab is blank. Can any one please tell me how do I get the results in datasource tab. Measure values are not appearing in DataSource tab in measure catalouge.
Thanks
Pramod

Yes, all the column entries must have agg rule. You can specify one such as 'first' in the pivot table.

IMSS Min Normalized Measure not appearing in imsmanifest.xml file

Hello,
The IMSS Min Normalized Measure line is not appearing in my imsmanifest.xml file. It used to, but since I upgraded to Captivate 5.5, I don't see it anymore. I have thoroughly checked my settings:
Reporting is enabled
SCORM 2004/Manifest/Default is selected
Report Status: Pass/Fail
Report to LMS as: Percent
Report Data: Quiz Results and Slide Views
Reporting Level: Interactions and score
Did Captivate 5.5 fix it so we don't have to add the minimum score into the zip file anymore? If not, how do I correct this so the line shows up?
Thanks,
Barb

Hi Melody,
What I've been told by Adobe is that Captivate 5.5 produces a different looking manifest file than previous versions of Captivate. For our LMS (Knowlagent), we require this line of coding so that we can manually input the minimum passing grade in a course.
Adobe said I could try to edit the default SCORM template to suit our LMS, but our LMS said it wasn't possible.
So instead, our LMS told us that if we adjusted the line of coding in each manifest file, it would work. And it has (it's just a little extra work each time you publish).
This is what you need to do:
Find the below block of code in your imsmanifest.xml file and change the value for satisfiedByMeasure from false (default) to true. Once that line is changed, in the same block of code paste in the minNormalizedMeasure line that was present in the file previously (both settings are highlighted below). The .80 is what we chose as our minimum passing grade (80%) but you can change that number to whatever you want.
                                                            <imsss:sequencing>
                                                                                <imsss:objectives>
                                                                                                     <imsss:primaryObjective objectiveID="PRIMARYOBJ" satisfiedByMeasure="true">
                                                                                                                         <imsss:minNormalizedMeasure>.80</imsss:minNormalizedMeasure>
                                                                                                     </imsss:primaryObjective>
                                                                                </imsss:objectives>
Hope that helps! Are you using Captivate 5.5 too? Which LMS are you using?
Thanks,
Barb

Newly added Cal.View Measure does not appear in the BEX Designer

Hi,
anybody come about this :
A newly added Cal.View Measure does not appear in the BEX Designer:
I got a runnig query in Bex Designer, based on a transient InfoProvider which is based on a HANA Calculation View
and
added a new measure to the Calculation View
and
added a Reference InfoObject in the Publisher to the (transient) InfoProvider.
and
see the newly added filed in the Listccube of the(transient) InfoProvider with a technical generated name
and do not
get the newly added measure in the BEX Designer.
Whats wrong ? What needs to be done ?
Thank You
Martin

Hi Martin,
Are you trying to consume the HANA Calc View in BEx Front End Tool - Query Designer.Could you also check the data preview of the Calc View shows the newly added Measure.Check the definition of Calc View under SYS_BIC schema ->Column Views.
Rgds,
Murali

My measurement tool is not appearing.

My measurement tool is not appearing. I have guides and rulers set to show and I am holding down Cmd but for some reason only the pink alignment lines are showing. Is there a setting I've missed??

What do you mean by the Measurement Tool? There are measurement tools, such as Ruler and Count, but no tool named Measurement. You mention that you are holding down the Command key, but this is for switching to the Move tool.

I have installed succesfully a PCI cards seen by windows but it does not appears in the device and interfaces tools of the Measurement and automation manager?

Cannot install new objects in device and interface to use the ni-imaq library and to take image from my camera.

Which PCI card did you install? The PCI-8252 and PXI-8252 will not appear in MAX. Does your card appear in the Windows Device Manager?

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

PXI System does not appear in MAX 4.0

Hello,
My system comprises LabVIEW RT 7.0, target PXI-8176 controller in PXI-1000B chassis, PXI-6608, PXI-6711, NI-4472, PXI-6704, PXI-6527, PXI-8423/4, PXI-8422/4. This has been stable for two years. I recently solved an RS-485 2-wire mode configuration problem, using information in a discussion forum thread, by upgrading to NI-VISA 3.4.1 and NI-Serial 2.5.5. MAX 4.0 was installed as part of this process. Everything seemed to work fine. I instructed a distant customer to do the same, but they experienced some difficulty. To ensure we were working from the same starting point, I re-initialized my PXI system, using PXI Format Hard Drive Disk, version 7.0, from MAX 4.0. I configured TCP IP address, and re-installed the RT software on the PXI controller.
Next, I attempted to configure the PXI controller and chassis, in MAX, to update the pxisys.ini file, but the PXI System (Unidentified) does not appear under Remote System>>IP address>>Devices and Interfaces. Similarly for the serial ports. This worked before, but I cannot get this back. What is wrong?
Best regards,
RonC

Hello S. Bassett
The controller is definitely booting in RT mode -- I can still run my applications on the RT target. VISA seems configured properly also, I can make VISA calls without error in the application.
In fact, the RT system seems to work correctly, and I contemplated leaving it as it is. However, the fact that MAX does not recognize the PXI system makes me nervous, and I cannot do some of the things I may want to do, for example independently configure RS-485 port wire mode in MAX (the ports do not show up either). Traditional DAQ configuration in MAX works.
After your last post, I found a brief reference in MAX Help that indicated "PXI Services" had to be downloaded before the chassis could be configured. But there are no other mentions of what PXI Services is, what it does, or how to install them. PXI Services does not show up as RT Software in MAX. In the Windows Add/Remove Programs control panel in Windows, in the National Instruments software section, there are two apparently related entries:
- NI PXI Platform Services for LabVIEW Real-Time 1.5.1
- NI PXI Platform Services for Windows 1.5.1
But, I cannot get these to install on the RT target. Not knowing what was causing the problem, I uninstalled everything from National Instruments, deleted all folders, and reformatted the PXI platform. There was one problem during this process -- after uninstalling NI-Serial 2.5.5, it does not get removed from the Add/Remove programs control panel. There is still a registry key that the uninstaller did not remove -- presumably this is the problem.
I have rebuilt everything, but could not get NI-Serial to install -- the installer thinks there is a newer installed on the RT target (there isn't) and refuses to install NI-Serial 2.5.5. So right now, I cannot install NI-SERIAL (any version), or remove the 'existing' NI_SERIAL, because it isn't actually there, and there is no uninstaller.
Otherwise, everything seems to be back to where it was before I "upgraded" to NI-VISA 3.4.1. This was NI-VISA 3.0, LV RT 7.0, and MAX 3.0.2. I have not yet been able to install NI-Serial, so I cannot yet see if I have also restored my original problem -- the one that led me to have to upgrade NI-VISA and NI-SERIAL in the first place.
Most importantly, there is now a "PXI Services v1.1.2" installed on the RT target. I am quite sure the problem with MAX 4.0 not recognizing my PXI system has to do with the absence of this driver on the RT target.
Thanks again for your interest and help,
RonC

Order Number is not appearing in Asset PR

Hi,
At the time of creation of Asset PR, the order number is not appearing. I had already assigned the order number in "origin" tab in Asset Master. Please find below details:
1) Creation of Asset with AS01
2) Creation of Order with KO01
3) Assign the order in Asset Master "Origin" tab. The field is "Investment Measure".
4) Creating a PR with Account Assignment "A". But the time I provide asset number, the Order field is coming as "blank".
I am making Direct Capitalisation through Internal Order with asset under Construction.
Please suggest.
$atya

Hi
please check the settings from the note 684659.
Best Regards,
blaz

How do I run a J-type thermocouple to the usb-6363 DAQ and program labview to measure temperature?

I have a usb-6363 DAQ and a J-type non-contact thermocouple that I am looking to connect and measure temperature through. However, the DAQ does not have any T/C inputs, which is needed to measure in the thermocouple temperature. I am connecting the thermouple to an analog input (+/-) and I am not looking to buy an amplifier, converter or any other hardware. I believe there is a way to program labview to read in the voltages of the thermocouple and convert it into accurate temperature readings. Any help/ideas?

Hello George,
This tutorial should step you through the basic process of configuring the device and connecting the thermocouple:
Tutorial: Connect Thermocouples to a Data Acquisition (DAQ) Device
http://www.ni.com/gettingstarted/setuphardware/dataacquisition/thermocouples.htm#Connecting a Thermocouple to Your Device
From there, there are a number of things you can do- I'd recommend taking a look at the LabVIEW shipping examples (Help>>Find Examples...) as well as the DAQmx getting started tutorials:
Getting Started with NI-DAQmx: Main Page
http://www.ni.com/white-paper/5434/en
At first glance, the 6363 you're using should have enough resolution to acquire usable data from a thermocouple- if you attempt reading raw voltages be sure that the acquisition range is configured for +/- 0.1V, though.
Regards,
Tom L.

3D menu does not appear in photoshop cs6

3D menu not appear in photoshop cs6 , i have windows 7 , 64 bit ??

Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2394 MHz
Built-in memory: 4002 MB
Free memory: 1808 MB
Memory available to Photoshop: 3361 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GT 525M/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 2
Video Card: NVIDIA GeForce GT 525M
OpenCL Unavailable
Driver Version: 9.18.13.697
Driver Date: 20121002000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GT 525M
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Video Card Number: 1
Video Card: Intel(R) HD Graphics Family
OpenCL Unavailable
Driver Version: 8.15.10.2361
Driver Date: 20110410000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igd10umd64.dll,igdumdx32,igd10umd32,igd10umd32
Video Mode:
Video Card Caption: Intel(R) HD Graphics Family
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92628701192123445467
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\A\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 226.1G, 165.0G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/06/26-12:17:19   4.0.95   66.510504
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.2
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Collada 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Difference Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Embed Watermark 4.0
   Extrude 13.0
   FastCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mezzotint 13.0
   MMXCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Picture Package Filter 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Pinch 13.0
   Pixar 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0.1
   Shear 13.0
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Sumi-e 13.0
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variations 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   WIA Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Calculated Field formula not appearing in Power View Field List panel

Hi,
On Power View1 sheet of this
workbook, the two PowerPivot calculated Field formulas (First Visit and First date of FY) are not appearing in the Power View Fields panel on the right hand side.
I want to drag client and First Visit (calculated Field) to the Power View.
Why is this happening?
Regards, Ashish Mathur Microsoft Excel MVP www.ashishmathur.com

I found a workaround for it - I was having the same problem as you. I wanted to display the last refresh date of my data, but Power View wouldn't display a date resulting from the [Last Refresh]=MAX(Date[Date]) formula.
HOWEVER, a Pivot Table can handle that Calculated field just fine. So I renamed my measure "Refreshed Date" and added another tab in the Excel Sheet. I added a Pivot Table from PowerPivot into cell A1 and the only thing I put was that single
measure (A2). To the right of that, I did =A2 and created an Excel Data Table. The title of that was "Last Refresh". Now, I could add that Data Table to the PowerPivot Model and into Power View. And then I hid that tab.
The only downside to this method, is that if you're refreshing single tables at a time, you have to remember to refresh the Pivot Table when new data is added AND update the data in the model. I'm only connecting to one database, so I just choose
"Refresh All" in Excel and it updates everything. It works perfectly! :)
Well shoot, I even took a screenshot that helped explain everything, but it won't let me post it because my account isn't verified and it won't tell me how. If you have any questions, please let me know and I'll clarify!

Newbie question: working with note durations across measure breaks

Hi, I'm a newbie with Garage Band. Last night I was entering some music as a software instrument, using the editor in both musical notation view and the other view (where the notes are solid rectangles). I'm having problems with note lengths. When I enter an eighth note, I want it to stay an eighth note . But when I copy-and-paste them, they don't start at the right place and the duration gets strange.
I also had a lot of problems ending a 4/4 measure with an eighth note (on the "and" of beat 4) that should be tied to the first note in the next measure. I couldn't do this easily. I finally switched to the non-music notation mode, and dragged the right side of the note across the measure boundary, but with that, I couldn't get an eighth note, it would only go for a full beat in the next measure.
Thank for any help
j

So, when I expect to add a quarter note (actually it should be notated as two tied eighth notes), instead I'm getting a dotted quarter note (appearing as an eighth note tied to a quarter note).
As I said, musical notation is not directly tied to the duration of the notes. So before you add that last quarter note, the display is perfectly musical. Now when you add the last note, the display switches and displays the notes differently. I just tried it out, I can add that note in the notation view (you might want to put it on the 1 of the next beat and then drag it to the left a little).
Most experienced GB users don't bother to use the notation view for editing, but use the "piano roll" view which gives you a lot more control about how the notes sound. Then let GB do the job of displaying them - you don't have andy influence on that anyway.

Why the photoshop image processor not appear in bridget cc?

Whythe photoshop image processor not appear in bridget cc?

Hello,
I had this problem too after I did the latest upgrade and installed Ps 2014 a day or so ago. Bridge was missing the Photoshop option under Tools. I uninstalled Ps 2014. Then for good measure I uninstalled and reinstalled Bridge. It still wasn't there then all came back after I reinstalled Ps 2014. Good luck.

Boot system flash: does not appear on 2960 running config

Dear friends,
On the 2960, i have two .bin images and i am pointing to the latest one.
However, the boot system flash: command along with the new image does not appear in the running config but it appears in the
show boot command.
t3a.sidradc.dmz.01#dir flash:
Directory of flash:/
    2 -rwx        2131   Jan 3 2010 07:30:45 +03:00 private-config.text
    4 -rwx     8040418   Mar 1 1993 05:31:51 +03:00 c2960-lanbasek9-mz.122-50.SE3.bin
    5 -rwx         676   Jan 3 2010 07:28:50 +03:00 vlan.dat
    6 drwx         128   Mar 1 1993 03:02:32 +03:00 c2960-lanbasek9-mz.122-44.SE6
546 -rwx        4120   Jan 3 2010 07:30:45 +03:00 multiple-fs
548 -rwx        9001   Jan 3 2010 07:30:45 +03:00 config.text
32514048 bytes total (21123072 bytes free)
t3a.sidradc.dmz.01(config)#boot system flash:c2960-lanbasek9-mz.122-50.SE3.bin
t3a.sidradc.dmz.01(config)#exit
t3a.sidradc.dmz.01#wr
Building configuration...
[OK]
t3a.sidradc.dmz.01#sh boot
BOOT path-list      : flash:c2960-lanbasek9-mz.122-50.SE3.bin
Config file         : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break        : no
Manual Boot         : no
HELPER path-list    :
Auto upgrade        : yes
Auto upgrade path   :
NVRAM/Config file
      buffer size:   65536
Timeout for Config
          Download:    0 seconds
Config Download
       via DHCP:       disabled (next boot: disabled)
t3a.sidradc.dmz.01#sh run | inc boot
boot-start-marker
boot-end-marker
Are you aware of any reasons for this?
Thanks a lot
Gautam

and the other being the issue where IOS can return the prompt before it's done unpacking the files
Ok, now what EXACTLY is the appliance and IOS version? The only time I know of this bug is the Metro Ethernet (ME) switches and when the current appliance is upgraded FROM an IOS version 15.2(1)S.
But there is a "workaround" which Cisco doesn't want to publish (don't ask me why not): Use "archive tar /x" and, optionally, delete the old IOS sub-directory.
Personally, I wouldn't recommend anyone using the "copy the BIN file" method unless you know what you are doing or you've put extra measures in place. The "archive /x tar" and/or "archive download-sw" was developed so that it could be automated and the operator can see the result at the end. The "copy the BIN file" method doesn't give anyone a result whether or not the file was copied or not or was the file copied completely.
Regularly, I would upgrade our switches (2960/2960S, ME-3800X, 3560E/3560CG, 3750X) fleet using the "archive download-sw" method and I don't use scripts. I just copy-and-paste the command. So far, since 2009, I've "lost" only 6 switches when I upgraded the switch to upgrade the wrong file (another IOS bug on it's own) and I had to physically show up and upgrade using ROMmon. Every time I would upgrade, about 900 switches (some in a stack), it would take me about 4 days. Even though I work with three guys who's very good at almost any scripting but we've come to a unanimous conclusion NOT to use scripting.
Moving on, if "copy the BIN file" is still a preferred choice, I would like to know how do you go about verifying the file was copied completely? Whenever I resort to the "copy the BIN file", I ensure the file copied is complete by verifying the MD5 hash value against the MD5 hash value found in the Cisco website. Trust me, adding this additional "layer" of security saved me doing ROMmon upgrade so many times.

Daq do not appear at measurement i/o

Similar Messages

Maybe you are looking for