DAQ Solution Wizard greyed out in Labview 5.1

My DAQ board seems to be work correctly when using MAX, but in LabView the DAQ Solutions Wizard is greyed out. I have a PCI-MIO-16E-4 DAQ board, Labview v5.1 and NI-DAQ v6.9.2f8. I am running Windows 2000.

Make sure that the LabVIEW 5.1 support files have been installed along with NI-DAQ. Go to the Control Panel >> Add/Remove Programs >> NI-DAQ >> click Change >> select Add/Remove. If there is a red X next to LabVIEW 5.1 support, then it has not been installed. Install the entire feature and the DAQ Solutions Wizard should work.

Similar Messages

Daq Solutions Button Greyed out after reinstall

Problem: Purchased new NI PCI board (not sure the # now) and it came with NI-Daq 7.2 with it. I went to install it and found out it doesn't install with Windows95. Not that big of deal, needed to upgrade anyway. So, I installed a newer Pentium3 with Windows 2000 and installed all the drivers for the 2 PCI boards we use. Then I installed Labview 6i. After that I tried to install NI-Daq 7.2 and found out Labview installs an older version so I removed Labview completely, Installed NI-Daq 7.2, then reinstalled Labview 6i without the older NI-Daq verion that comes with it. Now when I load up Labview the "Daq Solutions" button is greyed out. I completely uninstalled NI-Daq and Labview again, reinstalled just labview with its olde
r (6.8) version of NI-Daq and still have the same problem. I searched here and didn't see any other solutions to this problem other than reinstall the software. I have done that 4 times now to no avail. Any other help?

Hendry,
First of all, what is the model of your PCI data acquisition board? Depending upon your board model, you may want to use NI-DAQ 7.0, since that will allow you to automatically install support for LabVIEW 6.i. NI-DAQ 7.2 should work with LabVIEW 6.i, but you may have to manually copy some files to appropriate locations. With your current installation, does your board show up in MAX? If so, can you run any of the data acquisition examples that ship with LabVIEW?

Why do i get a daq hardware configuration required window when trying to run the daq solution wizard?

i have recently installed the ni 4552 for pci dynamic signal analyser, and am attempting to configure my system and teach myself labview. when attempting to run the daq solution wizard i am presented with the daq hardware configuration required window.
Attachments:
DAQ_Hardware_Configuration_Required.ppt ‏38 KB

hi brian, thanks for your help. i have recently received version 6.1, and done a complete re-install. i have also downloaded the latest ni daq (6.9.2) and ni dsa (6.11) versions and installed them, but still i get the same error message when trying to open the solutions wizard (please see attached powerpoint presentation).
upon selecting the "go to ni daq config utility" option MAX opens. everything appears to be in order (device passes test, test panels run ok and virtual channels are configured correctly). i am unable to go any further.
i would appreciate any guidance that you are able to give me in this matter. many thanks in advance of your help.
best regards,
ben halkon

TS1559 still no solution for greyed out wifi and bluetooth - what to do? been messing around with it for weeks and now discover I'm just outside of warranty period? WHAT?

I am in such a predicament - phone not been quite right since the 6.1 update and I was tolerating the inconvenience of switching off and on etc etc for the past couple of months and now the wifi and bluetooth are totally greyed out all the time - did every restore possible including back to factory settings - still no luck - please don't tell me that trying all the solutions over the past 2 months that temporarily worked for a few days at a time will now mean I have timed myself out of the 1 year warranty? arghhhhh (I can't believe that such an issue will create the response 'oh well, your problem - best just buy another one' ???)
I can't just drop everything and drive to the apple store and wait for hours every time there's a 'glitch' otherwise I may as well move nextdoor to the mall. They tell you to try and solve it yourself first - which I did - and now it's not responding to anything I try, will I be told - 'too late, out of warranty'???
I see theres an update for the iphone 5 that fixes wifi bugs - what about us 4s owners? even my 3 year old 3gs is still working on wifi (haven't dared to update it!) so don't start telling me to expect that the iphone will only last 13 months - NOT AT $600 a piece
This is madness and driving me crazy
Please has anyone had any luck fixing this problem???

well, you know how it is - glitches that usually resolve with a hard reset etc
then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!!

Solution for greyed out wi fi have done reset settings

any ideas for greyed out wifi have done the settings reset as suggested on apple site

Try doing a restore in iTunes http://support.apple.com/kb/HT1414. Make sure you make a backup of your device first http://support.apple.com/kb/HT1766 then restore and setup your phone as new.
If that doesn't work you have a hardware failure and you should contact Apple Care for support or go to an Apple Retail Store.

Table control designed by wizard greys out after pressing enter

Dear Gurus
I have implmeted a badi to show some data on vl02n in a extra tab inside a table control designed using table control wizard. I have caught sy-ucomm event to display corrsponding data on the table control to what I am already sending from pbo of the screen everything is working fine beside just one thing. Initially all the rows of table control stays in editable mode but When I enter some record and hit enter the corresponding record is properly shown along with the record from pbo and enterd on the table control but beside the current row all the rows below it turn grey and I cannot enter any further data. Please help me out.
Anurag
Edited by: Anurag Jain on Sep 17, 2009 12:28 PM
Edited by: Anurag Jain on Sep 17, 2009 12:29 PM
Edited by: Anurag Jain on Sep 17, 2009 12:29 PM
Edited by: Anurag Jain on Sep 17, 2009 12:29 PM

Solved. The problem was with the sequence in which code was written for all table control in PBO module. PBO code sequence for table controls should be as per the sequence on screen.

What sample rate does the 2 channel oscilloscope example (solution wizards labview 5.1 ) acquire data at?

I am using labview 5.1 and a DAQCard1200. I chose the Solutions Wizard from the LabView starting window. I followed the steps and selected a DAQ based 2 channel oscilloscope. I chose to program scales etc. myself rather than use the virtual channels. My question is, in this program, when I change the timebase, am I changing the sampling rate? What is the sampling rate for that matter? Is it set to the DAQCard maximum? Does it change if I only set one channel to be active? I threw in some code so that I could take a snapshot of the data, but I end up with 2 columns of voltage data but no idea what the sampling rate was. Makes it very difficult to perform any frequency
analysis.

Hi, here's a simple program i did a few years ago. Just remember the daq cards only go up to about 100khz(assuming they have'nt changed) max sampling frequency, so your highest frequency will be 50khz to stop aliasing. This proram will let u select your sampling rate and let u select the number of scans to be aquired. I do not know if the spectrum analyzer side will be any use to u, but its there if u need it.
Stu
Attachments:
op_amp_2.vi ‏104 KB

HT1176 I am trying to add my iPhoto library to files to be backed up on time machine. I am told to click on the Options Minus butto, but it is greyed out. What is the solution ?

I have been trying to add my iPhoto Library to files for time machine backup.
I was instructed to click on the Options minus button - but it is greyed out and not functional.
What is the solution ?
Your help will be much appreciated.
Thank you.
Roberto Kay

You can "see" the iPhoto library in Time Machine backups, but you cannot "open" the library or "browse" the contents while you are in Time Machine.
Apple makes you restore the entire iPhoto library to another destination...like your desktop....if you want to retrieve a few older images that you may have deleted by mistake.
This is a convoluted mess, but unfortunately, that is the way it is.
See Pondini's excellent, detailed information on this:
http://pondini.org/TM/15.html
You might also want to post in the iPhoto support area to see if the experts over there might have a workaround for you. I cannot find one, but I'm not an iPhoto expert.
iPhoto

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

TS1398 My iPhone Wifi is greyed out.In Uruguay in Cellular Center that is where I buyed it told me it has no solution,it´s a problem of hw accepted by Apple,and they didn´t change it by another one cause their warrantee is 3 months and I bought in decembe

My iPhone Wifi is greyed out.
In Uruguay in Cellular Center (+598 2 903 3333) that is where I buyed it told me it has no solution, it´s a problem of hardware accepted by Apple, that Apple change the phone in this cases, but that they can´t change it by another new one because their warrantee is 3 months and I bought in december, 2012. It cost me US$ 1,250 and I want a solution because I saw in the Apple web that iPhone warrantee is 1 year and I am still covered by it.
I have the invoice dated December 24, 2012.
Do you have any solution to my problem?
It is hard to believe that a so expensive iPhone has a life of 6 months.
Do I need to take my iPhone to anywhere they can solve its problem?
Thank you so much.

Your Service and Support Coverage
iPhone 4S
Serial Number: C8PJHGELDT9V
Check another serial number
Valid Purchase Date
A validated purchase date lets Apple quickly find your product and provide the help you need.
Telephone Technical Support: Expired
You are eligible to purchase telephone technical support from an Apple Advisor.
Contact Apple Support
Repairs and Service Coverage: Active
Your product is covered for eligible hardware repairs and service under Apple's Limited Warranty.
Estimated Expiration Date: 10 December 2013
Learn about Apple's coverage information for your product.
Set Up a Repair
Eligible for the AppleCare Protection Plan
Get the AppleCare Protection Plan to extend your hardware repair coverage and add technical support for 2 years from your iPhone purchase date

Windows 8.1 will not allow me to join a domain Setting up a new 2012 server, and am trying to join laptops running Windows 8.1 to this new domain. When I go to properties for This Computer, Join a domain wizard is greyed out. Can I join a Windows 8.1 com

Windows 8.1 will not allow me to join a domain
I am trying to join laptops running Windows 8.1 to domain. When I go to properties for This Computer, Join a domain wizard is greyed out. Can I join a Windows 8.1 computer to a domain?

Have you verified that your Windows 8.1 is a Pro or Enterprise edition? The Basic edition cannot join a domain.

I am unable to merge events running iPhoto '11 - 9.4.2 (710.42) and Mountain Lion, 10.8.2. All options on the events down menu are greyed out and I am therefore unable to merge any events. Is there a solution?

I am unable to merge events as all drop downs in the events selection in the tool bar are greyed out. Is there a solution?

Thank you.
I tried to drag one event into another event but was unable to do so. The event that I tried to move into a second one would only move to another position in the event columnn, but it would not merge into another one.

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question).

I cannot access Content Library in iMovie - Content Library doesn't show on the iMovie screen and is greyed out when accessed through "windows" tab at the top. Also unable to update the projects/events (a suggested solution for a similar question). I haven't had this issue before, I have always used the content library on the screen but haven't used this for about a month. How can I make the Content Library available?

Thanks so much! I am backing up the entire computer now with an external hard drive - this should be fine right? And surely if I am backing up the whole computer these projects/videos will be backed up too? I wasn't sure how to do this any other way and I am clearly not great with tech issues. Once this is done and I am sure my projects/videos are safe I will do the delete and reinstall bit. Thanks for taking the time to help

Adobe Customization Wizard: "remove previous versions" greyed out?

Hi,
I am preparing an MST, with the Adobe Customization Wizard, to customize Adobe Reader 9.5.0 setup, and I see the "remove previous versions" checkboxes are both greyed out.
Reader's is blank while Acrobat's is checked - nevertheless, installing over a previous Reader, it correclty replaces it. But what about Acrobat?
Can't I install Reader 9.5.0 on a computer where, i.e., Acrobat Pro 9.4.0 is installed, without removing it?
thanks,
fabio

After testing some more, I can see that the greyed-out options are not taken in account at all. Even installing on a computer where the Pro is, it is not removed. I guess these options are only available for Acrobat, then, and not for the Reader.

Solution Landscape: why Request Check-out button could get greyed out ?

Hi,
We are on SolMan 7.0, SP15, including Ent. Edition add on.
In Solution Landscape maintenance, the Business Processes added to the solution (either directly or those borrowed from a Project) cannot be checked out to a maintenance project becasue the Request button is greyed out.
A simplistic SU53 check did not come up with any authorisation problems.
I am not able to switch on trace and take that route to detect now.
Can you please suggest as to what could be the possible reasons for this to be greyed out; also, have you used the 'Adjust to Original' button to bring latest changes in Project to Solution Landscape ?
Best regards,
Srini

Hi Rutger,
Thanks for your kind reply.
There is one problem - I am not able to see in my SolMan the 'tickbox' you have mentioned about.
The only sub-sections I see in the Tab there are:
(1) Monitoring
(2) Knowledge Warehouse Information
(3) Copy Criteria for Document
(4) Session Languages
(5) Assigned Maintenace Project
If it's feasible for you, can you please let me have a look at your screenshot as to how the sections look like. I wonder if there is any component missing to be installed.
Best wishes and thanks for your time.
Srini
Hi Rutger,
Thanks for your pointer again. I got a screenshot from a different friend (on another SolMan instance). Came to know of where these check boxes should occur.
Later, I found them in my instance too - the browsing scroll bar was the culprit. One had to go to the very bottom, move the scroll to the right extreme and then move further down. Really a silly mistake.
But, without your help, I wouldn't have know that there were such check boxes at the first place
Cheers,
Srini
Edited by: Srinivasan Radhakrishnan on Sep 17, 2008 11:47 AM

DAQ Solution Wizard greyed out in Labview 5.1

Similar Messages

Maybe you are looking for