DAQ Solutions not available on NI8176

DAQ Solutions not available on LAbview 6.1,DAQ Solutions button not highlighted cant be selected on opening Window. Hardware listed below.
- Installed on Embedded Controller NI8176/W2K.
- in PXI-1011 Chasis, NI 4472 in PXI slot, using a 6052E DAQ Card, SCXI Modules - 1540, 1520, 1102

Hello;
If you had another version of NI-DAQ installed before upgrading Labview to version 6.1, the best way to go about that is to uninstall NI-DAQ completely, and install the 6.9.2 version of the driver that goes with the Labview CD. To do that, just run the Labview installer and select the NI-DAQ driver from the list (choose custom install).
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Similar Messages

  • Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

    If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
    SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
    site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
    Office/365) system and create a new site from the that template you get the same issue.
    Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
    for me.
    Earllibby

    Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.  
    BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
    Earllibby

  • Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4.  When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

    Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4.  When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

    Clarification: this is a user forum; you are not addressing Adobe here.
    The answer to your question as phrased is: never.
    CS5 is history and it is not longer supported.  There will not be any updates or bug fixes for CS5.
    You need to convert the raw NEF files from your D810 to raw DNGs using the free, standalone Adobe DNG Converter 8.6 RC (beta), the first version ever to support that camera.. 

  • HT4098 Why are auto renewing subscriptions not available in Israel? Is there any solution?

    Why are auto renewing subscriptions not available in Israel? Is there any solution to this, any way to subscribe?

    Probably the same way no gift cards are allowed, and severe limitations on books & apps, etc.

  • I have 1P button (1Password), but the dropdown menu of options is not available. I have uninstalled the extension and reinstalled it per Agile Web Solutions.

    Agile Web Solutions provides an extension for Firefox that allows users to click a 1P button to communicate with their Macintosh password manager, 1Password. I have installed the extension, and the 1P button is available in the Firefox 4 interface, but the dropdown menu of options for entering passwords stored in 1Password is not available when the 1P button is clicked as it is in Firefox 3 and other browsers.

    You had to have some kudos for the effort put in to your thread as week as the point you make.

  • Automount: system hang on not available shares -- solution, alternatives?

    hello,
    i'm using snow leopard 10.6.5 on my macbook pro 13.3 with automount. my automount-entry looks like this (/etc/auto_master):
    /Users/abc/backup -fstype=smbfs ://abc:[email protected]/SHARE
    Works very well. I am connected to the network by wlan.
    Now I disable wlan (or switch my location to somewhere the share is not available). Once a programm (e.g. finder) tries to access the mount location, it hangs for ever. It should simply error out with something like "path not available" after e.g. 5 seconds and give up to try to connect (until the next access of the folder).
    So how can i have samba shares available when the network is up and no hang when the network is down? Is there any tool? I assume with "automount" it is not possible...?
    Regards,
    Markus
    Message was edited by: cpo_123

    simple shell script is the solution for different wlan.
    #!/bin/bash
    while true; do
    current_wlan="$(/System/Library/PrivateFrameworks/Apple80211.framework/Versions /Current/Resources/airport -I | grep " SSID" | sed 's/.*SSID: //' | sed 's/ /__/g')";
    if [ -f "/etc/auto_mount/$current_wlan" ]; then
    if [ "$(readlink /etc/auto_lnk)" != "/etc/auto_mount/$current_wlan" ]; then
    rm /etc/auto_lnk;
    ln -s /etc/auto_mount/$current_wlan /etc/auto_lnk
    automount -c
    fi;
    else
    if [ -e "/etc/auto_lnk" ]; then
    rm /etc/auto_lnk;
    automount -c
    fi;
    fi;
    sleep 15;
    done;
    Simply run as root. Add /etc/auto_lnk to /etc/auto_master and put a file with auto_master-syntax in /etc/auto_mount/WIFINAME.

  • My iPhone 4S mobile have some problem I didn't touch any button but some time my phone asking continuously Siri service not available how can I stop this problem. Even I try to to Siri service also this problem coming again please give me a solution

    My iPhone 4S mobile have some problem I didn't touch any button but some time continuously my iphone distrubing Siri not available please give further soliton even I try to stop Siri service as well it is coming again again please give solution

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • Adobe flashplayer not available on ipad..is there a solution???

    Adobe flashplayer is not available to download on my iPad2, this is very frustrating since it is used on many websites.  Support was not aware of any apps that might work...Does anyone know of a good flashplayer app?

    Flash is not supported on the iPad - and as Adobe have never managed to make a version of their flash player that works on iOS devices, and they have recently announced that they are stopping development on all mobile versions of it, it probably never will be.
    Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store.

  • Daq Solutions Button Greyed out after reinstall

    Problem: Purchased new NI PCI board (not sure the # now) and it came with NI-Daq 7.2 with it. I went to install it and found out it doesn't install with Windows95. Not that big of deal, needed to upgrade anyway. So, I installed a newer Pentium3 with Windows 2000 and installed all the drivers for the 2 PCI boards we use. Then I installed Labview 6i. After that I tried to install NI-Daq 7.2 and found out Labview installs an older version so I removed Labview completely, Installed NI-Daq 7.2, then reinstalled Labview 6i without the older NI-Daq verion that comes with it. Now when I load up Labview the "Daq Solutions" button is greyed out. I completely uninstalled NI-Daq and Labview again, reinstalled just labview with its olde
    r (6.8) version of NI-Daq and still have the same problem. I searched here and didn't see any other solutions to this problem other than reinstall the software. I have done that 4 times now to no avail. Any other help?

    Hendry,
    First of all, what is the model of your PCI data acquisition board? Depending upon your board model, you may want to use NI-DAQ 7.0, since that will allow you to automatically install support for LabVIEW 6.i. NI-DAQ 7.2 should work with LabVIEW 6.i, but you may have to manually copy some files to appropriate locations. With your current installation, does your board show up in MAX? If so, can you run any of the data acquisition examples that ship with LabVIEW?

  • Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

    Hi Folks,
    I was trying to save basic search template master page "seattle.master" after making change to the template.
    I have added just "CompanyName" folder and update the line below in seattle.master.
    Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
    When I save it, and refresh page on browser, it shows "Something went wrong" error.
    ULS says the following error : "UserAgent not Available, file operation may not be optimized"
    Pls let us know if there is a solution.
    Any help Much appreciated !
    Thanks,
    Sal
    

    Hi Salman,
    Thanks for posting this issue, 
    Just remove this below given tag and check out. It might be happened that your control is conflicting with others. 
    Also, browse the below mentioned URL for more details
    http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
    I hope this is helpful to you. If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Data Federator data source not available causes Universe Connection error

    I created a Data Federator project that connects to 20 servers across US and Canada.  All data sources are SQL Server 2005.  The DF project maps 40 source objects into 4 target objects.  I created a universe based on the DF project and we have been quite pleased with Webi query response.  Today one of the source servers was taken off line and this generated a connection error when trying to access the universe (not trying to access the data source that failed).  We do not want the universe connection to error when one source server is not available u2013 is that possible?
    If the answer is no then I see us abandoning what appears to be a great solution for real time distributed reporting and resorting to ETL and moving data.

    Hi Chapman,
    Can you be little elobrate on what you have done to solve the issue.
    Thanks,
    Dayanand

  • Service Desk with IC WebClient: Category Modeler not available

    Hello,
    We are currently implementing a Service Desk Application based on SAP Solution Manager. Therefore we are using the article "Implement an ITIL Employee Service Desk with IC WebClient" of "www.CRMExpertOnline".
    One of the steps, which are described in the article describes how to Categorize incidents with the Category Modeler. It says that the Category Modeler is available trough BSP Application CRMM_ERM_CAT.
    Unfortunately this SAP-Application is not available on our system.
    Our System Data:
    SOFTWARE COMPONENT               RELEASE                    LEVEL               HIGHEST SUPPORT PACKAGE          DESCRIPTION
    SAP_BASIS                                        700                              0012               SAPKB70012                                        SAP Basis Component
    SAP_ABA                                             700                              0012               SAPKA70012                                        Cross-Application Component
    PI_BASIS                                        2005_1_700          0012               SAPKIPYJ7C                                        PI_BASIS 2005_1_700
    ST-PI                                                  2005_1_700          0005               SAPKITLQI5                                        SAP Solution Tools Plug-In
    SAP_BW                                             700                              0014               SAPKW70014                                        SAP NetWeaver BI 7.0
    SAP_AP                                             700                              0009               SAPKNA7009                                        SAP Application Platform
    BBPCRM                                             500                              0009               SAPKU50009                                        BBPCRM
    CPRXRPM                                             400                              0009               SAPK-40009INCPRXRPM                    SAP xRPM/cProjects/cFolders 4.00 (ABAP)
    BI_CONT                                             703                              0005               SAPKIBIIP5                                        Business Intelligence Content                    
    ST                                                       400                              0012               SAPKITL422                                        SAP Solution Manager Tool                            
    ST-A/PI                                             01I_CRM500          0000         -                                                                 Application Servicetools for CRM 500         
    ST-ICO                                             150_700                    0009               SAPK-15079INSTPL                         SAP Solution Manager Implementation Cont
    ST-SER                                             700_2006_2          0003               SAPKITLOK3                                        SAP Solution Manager Service Tools
    Does anybody know where I can find/download the category modeler-application?
    Thanks in advance,
    Andreas

    Hello Andreas,
    The question is that  CRMM_ERM_CAT is an application, also a transaction but this is not the name of the associated BSP I think, this belongs to component CRM-PCF more than Solution Manager.
    I have seent some messages speakin about to call:
    http://server:port/sap/bc/bsp/sap/crm_bsp_frame/entrypoint.do?
    appl=CRMM_ERM_CAT
    Sorry! I can not tell you more about this, regards,
    Dolores

  • The Default Gateway Is Not Available / Problem

    Hello, I recently purchased this HP Pavileon laptop, and I've been encountering this problem very often (every 2-10 minutes).  This problem is getting extremely frustrating as absolutely nobody has been able to provide a fix for this issue.
    When the laptop is on battery mode (this does not happen when plugged in); I commonly get disconnected from my wi-fi connection and to fix it, I must run the troubleshooter. This temporarily fixes the issue by resetting the wi-fi adapter.
    What I have tried and has not worked:
    * Turn off to save power option in the driver settings (in Device Manager) untickets
    * Updated drivers
    * New power plan
    * Tried different drivers
    * Complete system restore
    The wireless adapter is Realtek RTL 8188EE.  Upon running the troubleshooter, this is all the information from the detailed information section:
    Windows Network Diagnostics
    Publisher details
    Issues foundThe default gateway is not available
    The default gateway is not availableThe default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
    Fixed
    Reset the "WiFi" adapter
    Completed
    Investigate router or broadband modem issues
    Not run
    Issues found
    Detection details
    6The default gateway is not availableFixed
    The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
    Reset the "WiFi" adapterCompleted
    This can sometimes resolve an intermittent problem.
    Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Repair.1.etl Investigate router or broadband modem issuesNot run
    If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. Once all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back in to the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
    Detection details
    Diagnostics Information (Network Adapter)
    Details about network adapter diagnosis:
    Network adapter WiFi driver information:
    Description . . . . . . . . . . : Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
    Manufacturer . . . . . . . . . : Realtek Semiconductor Corp.
    Provider . . . . . . . . . . . : Realtek Semiconductor Corp.
    Version . . . . . . . . . . . : 2012.2.827.2013
    Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem8.inf
    Inf File Date . . . . . . . . . : 12 September 2013 10:17:00
    Section Name . . . . . . . . . : HP8188ee.ndi
    Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8179&subsys_197d103c
    Instance Status Flags . . . . . : 0x180200a
    Device Manager Status Code . . : 0
    IfType . . . . . . . . . . . . : 71
    Physical Media Type . . . . . . : 9
    Diagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    Information for connection being diagnosed
    Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
    Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
    Interface type: Native WiFi
    Connection incident diagnosed
    Auto Configuration ID: 1
    Connection ID: 1
    Connection status summary
    Connection started at: 2014-07-24 04:19:49-759
    Profile match: Success
    Pre-Association: Success
    Association: Success
    Security and Authentication: Success
    List of visible access point(s): 0 item(s) total, 0 item(s) displayed
    Connection History
    Information for Auto Configuration ID 1
    List of visible networks: 1 item(s) total, 1 item(s) displayed
    BSS Type PHY Security Signal(RSSI) Compatible SSID
    Infra <unknown> Yes 100 Yes Matt
    List of preferred networks: 1 item(s)
    Profile: Matt
    SSID: Matt
    SSID length: 4
    Connection mode: Infra
    Security: Yes
    Set by group policy: No
    Connect even if network is not broadcasting: No
    Connectable: Yes
    Information for Connection ID 1
    Connection started at: 2014-07-24 04:19:49-759
    Auto Configuration ID: 1
    Profile: Matt
    SSID: Matt
    SSID length: 4
    Connection mode: Infra
    Security: Yes
    Pre-Association and Association
    Connectivity settings provided by hardware manufacturer (IHV): No
    Security settings provided by hardware manufacturer (IHV): No
    Profile matches network requirements: Success
    Pre-association status: Success
    Association status: Success
    Last AP: 98-fc-11-88-61-b8
    Security and Authentication
    Configured security type: WPA2-PSK
    Configured encryption type: CCMP(AES)
    802.1X protocol: No
    Key exchange initiated: Yes
    Unicast key received: Yes
    Multicast key received: Yes
    Number of security packets received: 0
    Number of security packets sent: 0
    Security attempt status: Success
    Connectivity
    Packet statistics
    Ndis Rx: 34302
    Ndis Tx: 32619
    Unicast decrypt success: 0
    Multicast decrypt success: 0
    Unicast decrypt failure: 0
    Multicast decrypt failure: 0
    Rx success: 0
    Rx failure: 0
    Tx success: 0
    Tx failure: 0
    Tx retry: 0
    Tx multiple retry: 0
    Tx max lifetime exceeded: 0
    Tx ACK failure: 0
    Roaming history: 0 item(s)
    Diagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    For complete information about this session see the wireless connectivity information event.
    Helper Class: Auto Configuration
    Initialise status: Success
    Information for connection being diagnosed
    Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
    Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
    Interface type: Native WiFi
    Result of diagnosis: There may be problem
    Diagnostics Information (Wireless Network Adapter)
    Details about wireless network adapter diagnosis:
    For complete information about this session see the wireless connectivity information event.
    Helper Class: Native WiFi MSM
    Initialise status: Success
    Information for connection being diagnosed
    Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
    Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
    Interface type: Native WiFi
    Profile: Matt
    SSID: Matt
    SSID length: 4
    Connection mode: Infra
    Security: Yes
    Connect even if network is not broadcasting: No
    Result of diagnosis: There may be problem
    Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Diagnose.0.et​l
    Other Networking Configuration and LogsFile Name: NetworkConfiguration.cab Collection information Computer Name: LAPTOP Windows Version:6.3Architecture:x64Time:24 July 2014 04:34:47
    Windows Network Diagnostics Detects problems with network connectivity. Package Version:1.0Publisher:Microsoft Windows

    Run the HP Support Asssitant's Tune up application. There should be a new BIOS available. sp66866
    Have you installed the latest Windows 8.1 updates?
    Do not install optional video graphics updates.
    I was runnning into a similar problem with my HP product loan Envy Spectre 13 TouchSmart Ultrabook until I did the updates. I had upgraded my wireless router to a model with 802.11AC specification.
    Invoke the Device Manager and ensure that the box next to Allow this computer to turn off this device to save power is unchecked.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • OSB to Object Types: difference between NULL value and not available

    Hello all,
    I have a question about Object Types. More specifically, how to differentiate between an empty value (null) and a string not available.
    This is my case:
    I have created an object type with three parameters.
    CREATE OR REPLACE TYPE OSB_EMP_OBJ_TYPE AS OBJECT
    (EMP_ID NUMBER
    ,DEPT_ID NUMBER
    ,ORDER_ID NUMBER
    ,CONSTRUCTOR FUNCTION OSB_EMP_OBJ_TYPE
    RETURN self as result
    /I would like to see what happens when I put an empty string into emp_id, NULL into DEPT_ID and nothing into ORDER_ID.
    To do so I have this test script:
    declare
      p_emp OSB_EMP_OBJ_TYPE := OSB_EMP_OBJ_TYPE();
    begin
      p_emp.EMP_ID := '';
      p_emp.DEPT_ID := null;
    --  p_emp.ORDER_ID := null;
      if p_emp.EMP_ID is null
      then
        dbms_output.put_line('Empty');
      end if;
      if p_emp.DEPT_ID is null
      then
        dbms_output.put_line('NULL');
      end if;
      if p_emp.ORDER_ID is null
      then
        dbms_output.put_line('Not available');
      end if;
    end;The result of this is:
    Empty
    NULL
    Not availableIt seems that Oracle treats all three situations alike. What I would like to achieve is a way to see that p_emp.ORDER_ID was not initialized.
    To elaborate a bit: in our production system this procedure would be called from OSB and the object type would by the input for that procedure. Our database version is 10.2.0.5.0.
    Our procedures look something like this:
    procedure p_procedure ( p_emp in osb_emp_obj_type )
    is
    begin
      do_something;
    end;Can anyone tell me if there is a way to achieve this, so I can see whether or not a value in the object type was filled?
    Thanks in advance!

    Darn...
    Eventually we want to use this for an update procedure. The client gets all current data from the database by calling a webservice that (using OSB) selects the data from our database. What we want to achieve is that the client can update that data, by returning only the changed fields to an update procedure.
    We then handle an empty tag to update the field to null, and we ignore missing tags.
    OSB itself can handle this, but PL/SQL can't.
    I'm now thinking of adding an indicator to each optional field (clear_field_yn). OSB can still check for empty tags or missing tags. When a tag is empty, it's corresponding indicator will be set to 'Y'. If the tag is missing, then it will be set to 'N'.
    Is that a solution to consider, or is there a much simpler approach possible?

  • New DSO data fields are not available for transformations in the upwardflow

    Hello,
    There are data flow from
        many source DSOs -> Target DSO -> Final DSO.
    Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
    now new fields are added to the target DSO, final DSO and one of the source DSO.
    When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
    The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
    Have anyone faced such a problem?
    any solutions to this?
       - I cannot delete all the other transformations as this is too much work to do and there is no time for it.
    Regards
    Kannan

    We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

Maybe you are looking for