DAQCard 6062E Can it be installed into a desktop PC with an adapter?

Is there an adapter that goes from PCMCIA to the PCI bus or USB that would make it possible to use the DAQCard 6062E on a desktop PC running Windows XP. The laptop I was using is now dead.

The PCMCIA to USB device was found here... http://www.amtron.com/adapter/upisdma.htm
As you mentioned, the PCMCIA cards with USB jacks are popular for laptops. It's been a challenge to find the "opposite". It looks however like this can be used in a "PC mode".
I currently have an E series PCI card, which I'd like to replace with something smaller and/or external. Data acquisiton will still be through a PC using LabView.
The USB devices would seem to be a good alternative, however, upon browsing the boards here, it looks like some have had some troubles using DAQmx Base.
I was looking at the PCMCIA as an alternative, as I've used them in labtop acquisition settings before. The challenge here has been implementing this in a PC environment. The PCMCIA slots via PCI defeat my initial purpose, which is why I thought about trying to find a PCMCIA/USB adapter. However, if I'm going to do that...why not just go with a USB device? The only 'pro' for the PCMCIA cards right now is simply my previous familiarity with them.
Options options options!
Perhaps you can squelch my concerns about DAQmx Base? My experience has been mostly with Traditional DAQ, with a bit of DAQmx.

Similar Messages

  • ORA-20001: This demonstration can only be installed into an Oracle....

    I tried to install demostration and get en error:
    ORA-20001: This demonstration can only be installed into an Oracle database which has the English preferences loaded for Oracle Text. Please contact your administrator.
    What is that?
    O:10.2.0.1 XE (latest build)
    THX

    is this the presidential speech demo?
    Demo applications - how to run ?
    Message was edited by:
    tkyte

  • Can I shoot tethered into Lightrrom 4.2 with my Nikon D3X?

    Can I shoot tethered into Lightroom 4.2 with my Nikon D3X?

    http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

  • Can i charge my swedish ipod in america with an adapter?

    Can i charge my swedish ipod in america with an adapter?

    Yes. The power adaptors are rated for 115 to 240 volts.
    If your power adapter has the round pins used in Europe then you will need the little adapter that changes from round pins to flat pins. These are usually very inexpensive.
    Allan

  • Can't even log into the desktop

    I got a crash or something last night when I opened 2 webpage loading with flash applications, and the system slowed down and then later on can't even get any response.(Still my mouse can move and the screen show the 2 pages without response) I couldn't click the force quit or restart it so I pressed the back button to force switched it off.
    After that in this morning when I turn it on again, It stopped at the loading page and couldn't get into the desktop.
    I tried several times reboot, and now when I turn it on, a floder button flash on the middle of the screen and I don't know what to do.
    Please help thank you so much.
    PS: I am not sure what my OS is, it's likely 10.4.(something)

    Hi konrinn, and a warm welcome to the forums!
    Could be many things, we should start with this since it is Disk Problems likely...
    "Try Disk Utility
    1. Insert the Mac OS X Tiger Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Very Important, how much Free Space is on your Hard Drive first of all?

  • Nothing shows up on my Desktop. I can put a file into the Desktop folder but it will not appear on the DTop. The HarDrive is not on the DTop either.

    Nothing appears on my Desktop. The Finder seems to work, so I can place a file into the DTop folder, but nothing appears on the DTop, not even the HarDrive.

    You can temporarily hide the crap on your desktop. Edit the CreateDesktop key in com.apple.finder:
    defaults write com.apple.finder CreateDesktop -bool false && killall Finder
    Then, to get my clutter back:
    defaults write com.apple.finder CreateDesktop -bool true && killall Finder

  • I can't paste text into info boxes anymore with the latest version of itunes

    Ever since I downloaded the latest version of itunes (on Windows 7), I can no longer paste text into the info boxes when I edit song information. I can’t paste by right-clicking or Ctrl+V, this is driving me crazy because I’m trying to add info on a Russian artist with Cyrillic letters and I can’t do it! I didn’t buy the song from itunes so it can’t be issues with Copyrighting although the same thing happens with songs from the store and every other song in my library. I can paste text into the lyrics section but that’s it. I restarted my computer after reinstalling the latest versions of itunes and Firefox today hoping it would fix my problem but it didn’t. Is this happening to anyone else? I hope someone can help me! Oh and it isn’t just with Russian, I tried to paste English info just to see if it was a problem with recognizing Cyrillic and still nothing pastes, the boxes just stay blank.
    Itunes is annoying me more than ever. With the constant updates you’d think they would be able to improve all bugs but once one problem is fixed another occurs and it’s so irritating because I couldn’t care less about how my library looks as long as everything is organized in a simple way and I can sync my ipod without spending forever on itunes re-editing stuff and readjusting to updated layout changes. Apple’s attempts at making things look “cool” isn’t worth the F-ing constant problems which matter more! Okay, rant over

    M_E_G wrote:
    With the latest version of iTunes, my library screen has changed completely and I no longer have a Summary tab to select manual syncing of my iPod when I plug it into my computer.
    That would be Manually manage, not Manually syncing.
    Click the drop down arrow at top left the Show menu.
    Then iTunes menu View > Show sidebar.
    Select the iPod then you can select the Summary tab.

  • Why can't I sign into FaceTime or iMessage with my apple I'd after os 6 update

    I upgraded to os 6 and can't sign into FaceTime or iMessage since. Error message pops up saying incorrect username or password even though I use the same user name on iTunes. I tried creating a new apple I'd n that didn't work either.

    Hello,
    Might ask here...
    https://expresslane.apple.com/

  • Why can't I sign into my Game Center with my new password

    I Just changed my password now it won't let me into my Game Center?????

    Hi Aggrevated77,
    Welcome to the Support Communities!  I understand you just changed your password for your Apple ID and now you can't log into Game Center.  The first thing to do is to confirm your new password is working in other services that use your Apple ID.  Are you able to log in at www.icloud.com or in the iTunes Store?
    The article below will provide additional steps to try:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
    I hope this information helps ....
    - Judy

  • Can anyone tell me how to get the Firefly addon for Firefox 3.6.8 despite the fact that my installation attempt results in the message that it can't be installed because it's incompatible with 3.6.8?

    Need it on both Mac and PC. I use it with my old computer running Firefox 3.6.8 just fine but installed the addon before upgrading to 3.6.8. Additionally, I know other people who are running Firefox 3.6.8 + Firefly without a problem. I uninstalled Firefox and installed the oldest version I could find (3.5) and tried to add it that version but had the same problem. I disabled all other extensions but still no luck. Thanks so much!

    Hello there.
    If the add-on is incompatible with your current version, you need to contact its author and ask him to update his add-on.
    There is a way, however, to force compatibility on all add-ons. See this:
    http://kb.mozillazine.org/Extensions.checkCompatibility
    If you have any questions about the process, just ask.

  • Can I update installed BPEL 10.1.2 with BPEL 10.1.2.0.2?

    Hi,
    at last, it is finally out! But questions are coming up:
    Do I have to uninstall my running and configured BPEL 10.1.2?
    Or does the 10.1.2.0.2 installer update my current release and configuration is preserved?
    Thanks,
    Torsten

    Hi,
    unfortunately the answer is no: I never got an answer to my question. It still seems impossible to update the old engine.
    I did a NEW installation of 10.1.2.0.2 as a mid tier option into an OCS home. Good news is, that worked this time.
    BUT: for a production scenario, what would I do? No possibility to upgrade all the running process instances? Hmmm.....

  • Can anyone split frame into three independent areas with JSplitPane??

    Hi,
    has anyone tried to use JSplitPane to split JFrame in to 3 different areas? How should it be done correctly?
    What I have now is two nested JSplitpanes, i.e. I have 'baseSplitPane', which divides frame in two sections, and then I have 'upperSplitPane' as a top component of the baseSplitPane. Then I have three JPanels with JTables inside them; I need to show three JTables (lets call the upper, middle and lower;=) in one JFrame, and I should be able to resize them some some clever way.
    The problem is:
    When I move splitter of the baseSplitPane towards the top of the screen, first the middle table is shrinken. After that upper table starts to shrink, until splitter is in the top of the screen. When I start to move the splitter back to the bottom, the upper table still remains "minimized", and only the middle table is enlarged. No good!
    What I would need is a splitpane for three components, which splitters don�t affect each other. So that when moving a splitter, it just changes the size ratio of the two componts around it, and if you move it to the other splitter it stops. There�s no such component in SWING, is there??
    All hints are appreciated, thank you!
    /Jari

    That�s not exactly what I needed, but anyway that is much better than it used to be! So thank you for it, but still; moving one splitter effects to another splitter also.
    If no one tells me a better way to handle this, maybe I can live with it...
    Any other good hints, GraemeHook?
    /Jari

  • Why can't I sign into my Apple ID with out having to put in my credit card

    It says everything is alright with it on Safire and then I go to my App Store try to log in and says that this Apple ID has not been signed into iTunes Store and then when u press reveiw it says you have to give all this information on you credit card which I don't wanna give

    If you don't want to use a credit card with the App Store and iTunes, there is a very specific way in which you have to create the Apple ID. If you don't follow the steps exactly, you are forced to put in credit card details in order to use that ID. The other option is abandon that ID and create a new ID.
    Frankly, I hate the way that Apple handles creating an ID without giving users the option up front - in clear and uncertain terms - to create an ID without using a credit card. You have to search for the information in order to find it.
    If you create a new ID, you will also need another email address to use now. Something else that makes this an even bigger PITA. This explains how to create the ID without a credit card.
    Create iTunes Store account without credit card - Apple ...

  • Locked out with file vault. Did fix by setting up new user account but cannot access old account with files                           but I can't get back into my old account with all my doc's and pics

    I was locked out by File Vault. I set up a new account by fooling the notebook it was a new start up. Now I cannot access my old account with all of my files. I can see it in Accounts but it will not let me access. Help

    I managed to get a few Time Machine Back Ups  before I passed away
    I'm not sure whether a ghost can do this, but if you were still alive, you could do as follows.
    First make sure you have read & write access to the folder you're trying to restore to. You should be able to see its contents in the Finder, and to move files in and out of it.
    This is an exception to the rule that you should never make any changes to backup data. I've tested this procedure in OS X 10.8 only. It should work with later versions, but I don't know whether it works in earlier versions. Use it only for files that were backed up from your home folder, or a folder on another volume created by you, and would normally be writable by you. Do not touch backups of system or application files.
    In the Finder (not in the time-travel view), navigate to the backup volume, then to the folder named "Backups.backupdb", and then to the snapshot you want to restore from. The snapshots are folders labeled with the date when they were created. Inside each of those folders is a file hierarchy like the one on the volume that was backed up. Descend through the hierarchy until you come to a folder named "Users," and inside that, a folder with your user name. The procedure will be different if you're trying to restore files on another volume.
    Select the folder and open the Info dialog (command-I). Click the padlock icon in the lower right corner of the window and authenticate. In the Sharing & Permissions section, give your account Read & Write access. You may have to close the dialog and repeat this step in order for the change to show up. Then click the gear icon and select
              Apply to Enclosed Items
    from the popup menu.
    Try the restore operation again, in the time-travel interface.

  • How to install windows remote desktop services with Microsoft Remote desktop License

    Hi
    we have plane to install a server in our company, having windows server 2008 R2 - 64 bit. and also buy 10 RD cal.
    now how can install RD call after installing windows OS.
    kindly help will highly appreciate.
    Arvind

    Hi Arvind,
    On your server, using Server Manager, you need to install RD Session Host and RD Licensing Role Services at minimum.  After install you should set the licensing mode to match the type of RDS CALs you purchased as well as Specify the licensing server
    name (itself).  You may do this in RD Session Host Configuration (tsconfig.msc) or via group policy.
    Next in RD Licensing Manager you need to Activate your licensing server.  Before you can install your purchased 2012 RDS CALs you will need to contact the Clearinghouse and have them downgraded to 2008.  Please have your licensing number,
    authorization number, licensing paperwork/emails ready before you call them.
    Locate the Microsoft Clearinghouse Telephone Number for Your Country or Region
    http://technet.microsoft.com/en-us/library/cc754874.aspx
    Thanks.
    -TP

Maybe you are looking for