DAQCard-AI-16E-4 Config Utility vs VB command set.

The National Instruments Config Utility allows me to select the mode of the
card for analog input. I can choose differential, single-ended referenced
or single-ended non-referenced. Can I set these parameters using VB
commands or does the user need to make sure the configuration is correct in
the Config Utility manually?

Hi Don,
Couple of quick questions first
What sort of frequency do you want your loop to run at?
How quickly after the trigger pulse do you want to read the outputs, are the outputs transients or steady state readings?
Do you want to do this using the NI-DAQ API or the NI ComponentWorks ActiveX controls?
Paul

Similar Messages

  • 3gs is not recognized by iTunes or iPhone config. utility.

    my 3gs is only running 3.1.2, when trying to run the config utility i got the error code 0xE8000065, iTunes gave me error code kAMD Read Eror. im running windows 7. Any help with this would be terrific! Thanks

    I have the same problem with my iPhone 4 - since updating to iTunes 10.1.1 I my iPhone is not recognised by iTunes. I have reinstalled and done all of Apple's suggestions up to the point of messing with the deep settings in Windows (I'm not confident that I won't mess up other things if I do this). The computer recognises the iPhone but iTunes ignores it. Come on Apple - how about a simple fix that doesn't require a nerdy ability to delve into the depths of software settings!

  • How can i cancel a password i set in the html config utility for laserjet p1102w under mac osx 10.6?

    After setting a password in the Networking tab of the HTML Config Utility for HP Laserjet P1102w under MAC OSx 10.6, I cannot access either the settings or the Networking tabs again. How can I access them or just cancel the password I set?

    hi,
    I beleive your question has been answered in a different post
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Reset-the-admin-password-on-the-web-pag...
    hope this helps
    Russ@HP
    Say thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution
    (Although I am employed by HP, I am speaking for myself and not for HP)
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++

  • I need to acquire 6 channels (voltages) on a PDA with DAQCard AI-16E-4

    Hello all,
    This may be an elementary task, but I can't figure it out. I recently upgraded to a PDA collection system. My first task is to collect 6 voltages, at approx. 200 HZ per channel, for about 2-3 minutes. I have noticed that in DAQmx Base I can only set up three channels per task. Can I use two tasks at the same time? Will this cause a time delay between collecting each of the 2 channel groups? Maybe there is a way to collect all 6 with one task?
    Also, I would like to either dump these voltages to a file (.txt, or something that can be read in Matlab or Excel). I have not seen an example that does this, is it because it's not possible? I could also send the info via bluetooth to a laptop during the tests, but that seem like it might be complicated. any suggestions?
    Thanks, these forums have helped me a lot in setting up this system.

    Tom,
    Thanks for the reply. Since this post I have figured a few things out. I am now collecting 6 channels and storing them in a txt file readable with Excel. So that is good.
    The one thing I'm trying to confirm is that I am not losing any information due to overwriting memory. I need to acquire continuously until I hit the "stop" button, and once stop is hit I need to be sure that I have stored all acquisitions, i.e. the card buffer is empty and no data lost. I'll attach the VI that I am using. How should I set up my channels in the config utility?
    As far as software, I'm using DAQmx Base 1.0 and the LabView PDA Module 7.1 to work on the VI and build it. If there is an easier way to do this task, i.e. another VI that is simpler, or a different program (you mentioned DAQ assistant) I am interested.
    Thanks much!!
    Josh
    Attachments:
    ISL in PDA.vi ‏69 KB

  • 7920 Config utility ver 3.0 Problem Connecting to Phon

    Using the 7920 Config Utility 3.0. I have my 7920 phone Im trying to program... The system goes ONLINE to the phone just fine, but when I try to export the config to the phone, I get an ERR 300 "TFTP FAILS IN IMPORTING CONFIGURATION FILE." Then TFTP Server Port Number:69 , Connection Reset By Phone.
    I cannot get it to work and its very frustrating... any help is appreciated!!!

    Please be sure you are following the Installation guide for 7920 config utility.7920 USB NIC is supposed to be set for DHCP. Also ensure you are not running any TFTP server application on the PC that will also use port 69.The Configuration Utility has limited DHCP server capabilities. If the USB interface of the Cisco Wireless IP Phone 7920 is set to DHCP, the IP address should be 192.168.1.X to allow network communication between the Cisco 7920 Wireless IP Phone and the PC. The config utility will assign an IP to the PC's USB NIC.

  • IPhone Config Util stealing control from iTunes

    I installed iPhone Config Util and now it appears that when I attempt to sync the iPhone, iPhoto sees it but iTunes does not. Is there a way I can give control back to iTunes. I am not intending to manage the iPhone on an enterprise.

    Hmmm... It appears that all my Login items were removed from my account and iTunesHelper was the one which would allow iTunes to connect (noticed all this after rebooting the machine). iTunes will now recognize it if I manually start iTunes but will not auto-start when the iPhone is docked. Could not find iTunesHelper.
    Does anyone know where I can find iTunesHelper so I can add it to the Login items?
    I apologize if this does not belong on this list but this problem (of no Login items) appeared after upgrading Server Admin and adding iPhone Config Util to a newly upgraded 10.6 machine (non server).
    Paul

  • Connecting Counter hardware to DAQCard-AI​-16E-4

    I am dealing with a pulse train signal produced by our hardware with varying period, and am looking to obtain the time between each lo-hi transition.
    I have looked at the Count Time - Easy (DAQ-STC).vi within Labview 6 and this seems to give me what i want (the time between the events).
    My question is how do i connect my hardware to my DAQCard-AI-16E-4 via the SCB-68?
    This is my first time trying to work with counter/timers etc.
    Any info appreciated and also other solutions to the problem that i may be overlooking.
    Regards Ross

    The SCB-68 should have shipped with a big sticker designed to fit under the top cover. Apply the sticker. Now if you look, you should see where the counter-timer connections need to be made on the screw terminals. Consult the DAQ documentation that should have been installed from your NI-DAQ CD for the definitions of the vairous pins. Make sure you only connect TTL (0-5 V) signal levels to the counter-timers. They can be damaged more easily than the analog input channels, or so I've seen.
    Also, you might want to post the question over in the Multifunction I/O group.
    Dan Press
    www.primetest.com

  • Iphone config utility for Mac OS 10.5

    Is there an iphone config utility for Mac OS 10.5?

    Problem: Just got a new IMAC with System 10.5.4, now my Cisco VPN doesn't work. I had my files professionally transferred, vpn worked on my other IMAC, now it doesn't (Error 51). I downloaded vpnclient-darwin-4.9.01.0100-universal-k9.dmg, this version didn't work either (Error 51).
    I have tried everything from repairing permissions to entering code in my terminal and still get the error. Any solutions to this frustrating problem? I have spent hours looking for solutions and rely on my VPN for work, so I need help fast!
    Thanks to anyone with advice.

  • IPhone config utility won't work after Mavericks upgrade

    After my upgrade to Maverics, any time I try to use the iPhone Config Utility to install apps on my devices, when I click install, it crashes iPhone config utility.  I've already tried re-installing iPhone Config Utility - Any recommendations?  This is killing my productivity!

    If you are using the Apple configurator there is an update Apple has reasleased for it for support for Mavericks. It seems to be working for me but I'm also using it with the iPad 4th gen.

  • Does iPhone Config Utility Have an admin password to override?

    Hey guys,
    Very new to the iPhone Config Utility. I'm wondering if it's possible to limit a phone (or iPad actually) using the iPhone Config Utility, BUT have an admin password that overrides those limitations? So:
    1) install a limited profile on an iPad
    2) when they need an app installed (for instance) they just hand the iPad to IT, who has a "magic" password and installs that approved app, then logs back out.

    Real sorry guys, even though it's been 2 years since original post, but I've fixed it.
    I am using iPCU 3.6.2.300 and the problem was not on the iPCU, but, you can fix your image on Photoshop like below:
    iPad (Retina display) 152x152px; Resolution: 72 px/inch; Save as Bitmap (.bmp) with OS/2 file format.
    and for other devices, just follow the guidelines for size (in pixels) at the iOS Developer Library here, with resolution either 72px/inch or 96px/inch. Just remember to save as Bitmap with OS/2 file format, not Windows.
    Regards,
    Phillmont.

  • After reconfiguring shared service using Config utility

    Hi,
    I am unable to see my applications under Projects after reconfiguration from Config utility, i selected reuse existing tables. Does it require any additonal steps to see my existing applications under projects?
    Secondly i have backup for openLdap, but not relational backup of shared services before reconfiguration. is there any possibilty to recover HSS with openldap backup (no backup available for RDBMS)?
    Any solution to this problem.

    I am hoping this is not related to the post yesterday where I advised against running the config utility again.
    First of all if you ever run the config utility you should make sure you definitely have a backup of everything.
    Unfortunatey it sounds like the registration to the products has been lost, shared services db holds information relating to product registration, Openldap contains the provisioning information.
    You may end up having to reregister the products with shared services.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • AI Read sync'd to DAQCard-AI-16E-4 generated clock signal.

    I need to read multiple (3) analog input channels on a DAQCard-AI-16E-4.
    The device I am connecting to needs receive a clock signal to indicate that
    it should generate output. I want to send a signal and then read the three
    channels and then send the next signal. I will implement this in a loop so
    that I can read until a specified count of inputs has been received or until
    the user hits a stop button.
    Should I focus on using the SCANCLK, FREQ_OUT or simply use a digital out to
    output my clock?
    Which functions will I need to call in VB to do what I want? If someone
    could just list a command set that would do what I want it would really help
    point me in the right direction.

    Hi Don,
    Couple of quick questions first
    What sort of frequency do you want your loop to run at?
    How quickly after the trigger pulse do you want to read the outputs, are the outputs transients or steady state readings?
    Do you want to do this using the NI-DAQ API or the NI ComponentWorks ActiveX controls?
    Paul

  • HT4839 PLEASE HELP!!!  I am simply trying to update the APN settings on my Iphone3 AT&T carried Straight Talk SIM phone.  For some reason, when I enter the Straight Talk APN info in the Config Utility and click "Install", NOTHING HAPPENS.  WHY?

    PLEASE HELP!!!  I am simply trying to update the APN settings on my Iphone3 AT&T carried Straight Talk SIM phone.  For some reason, when I enter the Straight Talk APN info in the Config Utility and click "Install", NOTHING HAPPENS.  WHY?  I have spent almost 2 full days simply trying to get the cellular data network settings to appear and I am now at the point of pulling hair and/or smashing things.  Why is it so difficult to simply update the cellular data network APN settings on a standard Iphone 3 ATT with a unlimited Straight Talk plan?  Everyone knows that Straight Talk's $45 a month unlimited data/calling plan is supposed to be 100% compatible with AT&T carried Iphones.  Will someone please tell me HOW TO UPDATE THE APN SETTINGS ON THIS IPHONE 3.  Thanks and God bless
    <Personal Information Edited by Host>

    StraightTalk is not a supported carrier.
    Contact them for support.
    FYI, unless the device is officially unlocked from AT&T, you will not be able to use it on another carrier.

  • Iphone config utility version

    i'm using mac 10.5.8
    so i can't use iphone config utility ver 3.X, but only 2.x
    however, i can't add the ipa to iphone with that
    iphone verison is ios 5.0.1
    so
    Q1: which is the latest version of iphone config of 2.x ? ( mine is 2.1 )
    Q2: where can i download it?
    Q3: i can't add in ipa, is that due to iphone config utility 2.x ?

    Q1. 2.2 (but listed minimum requirement is OS X 10.6.)
    Q2.  iPhone Configuration Utility 2.2 for Mac OS X
    Q3. Yes
    http://help.apple.com/iosdeployment-ipcu/?lang=en

  • Trying to confiq cisco bridge WET200. connected to macbook ethernet port. entered 192.168.1.226 for config util. Times out.

    I am trying to configure (due to WEP code on my wireless network) Cisco bridge WET200 for use in my home theater. To configure, I connected to ethernet port of macbook OS 10.6.8. Entered IP address 192.168.1.226 for config utility but it times out. Cisco says I need either IE or firefox. Downloaded firefox but still fails. Has anyone had experience with this?

    Found that if I clean up DNS for my domain with PTR and A then everything started working properly after a rebuild.

Maybe you are looking for