DAQCard6024E - Win7 - Card recognised as "Unknown"

Bonjour,
J'ai déjà posté ce message, a priori dans une mauvaise partie du forum, sorry...
Nous avons finalement migré de Win XP vers Win 7 32 Bits dans ma société.
J'ai installé la suite de pilotes "NIDAQ980f0.exe" avec succes, Win 7 a reconnu la carte lorsque je l'ai branchée la première fois aprés l'insallation, message reçu : "your H/W is now ready to use".
Mais quand je veux mesurer avec mon programme (interne) il y a un problème de driver, et quand je regarde dans computer management la carte est détectée comme "unknown" (voir capture d'écran)
Computer is a Panasonic CF-52, Core i5, Win 7 32 Bits.
Merci de votre support.

To me the case is simple and the reason why the SD card reader does not work is that an compatible driver isnt installed.
My theory seems to be correct since the SM bus controller and PCI simple communications controller appear in the device manager and I guess one of these devices belongs to the SD card reader/controller.
I think you should simply install this Realtek Card Reader Controller which I found on the Toshiba EU driver page
http://support1.toshiba-tro.de/tedd-files2/0/carc-20130924161048.zip
Furthermore you should install all other Win 7 drivers as well as Toshiba tools available for Satellite C850 series.
Very important is the chipset driver, USB 3.0 driver (Win 7 needs this driver to control the USB 3.0 port), display driver. etc
Not very essential tools are Bulletin Board, Online Product information, Reeltime, etc such additional tools dont improved the notebook performance so its up to you if you want to use these software parts

Similar Messages

Satellite C850-B635 and Win7 - card reader is not working

My notebook came with windows 8 and the card reader was working
but I installed windows 7 64-bit , downloaded all required drivers to my notebook , but the card reader is not working now .
I downloaded a driver called card reader controller but it didn't work as well
I don't know if there is a problem or there is a driver that I should install and I don't know .
please help me solving that problem .
In my windows device manager these devices isn't recognized :
*PCI simple communications controller
*SM Bus Controller
*Unknown Device
I tried to search in my drivers download page in Toshiba website but couldn't find these
please help me making my card reader working again.
Regards
Message was edited by: domaking

To me the case is simple and the reason why the SD card reader does not work is that an compatible driver isnt installed.
My theory seems to be correct since the SM bus controller and PCI simple communications controller appear in the device manager and I guess one of these devices belongs to the SD card reader/controller.
I think you should simply install this Realtek Card Reader Controller which I found on the Toshiba EU driver page
http://support1.toshiba-tro.de/tedd-files2/0/carc-20130924161048.zip
Furthermore you should install all other Win 7 drivers as well as Toshiba tools available for Satellite C850 series.
Very important is the chipset driver, USB 3.0 driver (Win 7 needs this driver to control the USB 3.0 port), display driver. etc
Not very essential tools are Bulletin Board, Online Product information, Reeltime, etc such additional tools dont improved the notebook performance so its up to you if you want to use these software parts

Dropped PB (60cms carpeted wood floor) and now no Airport card recognised

Hubby just dropped his 12 PB by tripping over the cable and janking it off the arm of the sofa (yeah- I know- I could murder him!) onto a double carpeted (rug over fitted carpet) wood floor but it went off.
Took a while to restart and first time round with me trying it made that horrid piiiiiinnnnggg sound.
Started up and checked out OK. S.M.A.R.T. verified.
Ran repair permissions just for good measure and we noted that the Airport was not controllable. Tried to run Set Up Assistant but no airport hardware found. Ran Hardware Test.
Basically the Airport card is now "not found" according to the second, and extended, Hardware Test.
What do I do now?

BIG hug.
Yep- that sure did it. I didn't appreciate just how accessible the airport card was.
When I opened the little side flap the antenna was pressed against it. Pulled it all out and then thought what the hey- just pushed a wee bit harder and it went in another centimetre! So- thank you very much.
Let this be a caution to everyone- armrests of chesterfields are NOT good places to park expensive computers. If your Airport card cannot be found just take off the battery and check under the wee flap- the Airport card should NOT show- it ought to be under the casing with only the antenna showing.

Contact card in a Word comment shows an unknown presence status

Hi,
The contact card shows an unknown presence status for myself. I noticed this issue when I was adding a new comment to a Word document. My picture isn’t shown on the card either.
While not a major issue, I also noticed that the contact cards for the file's author and last modifier are broken in all Office apps. However, I'm signed in to my Office 365 account in all Office apps, so it looks like that Office isn't
linking my contact details with the online account. Also, my own picture isn’t visible in the user details (in File>Account).
The option "Always use these values regardless of sign into Office" is unchecked in settings. Skype for Business is installed and running in the background. I guess all these issues are related to each other but the main issue
is the broken contact card for a comment.
My colleagues have the same issue (tested with three other computers, one of them was purchased recently). All computers are running Windows 7 with Office 365.
Could you help me to solve this issue?
Ps. I was referred to this forum from the Office 365’s forum – that thread has some screenshots and testing results: http://community.office365.com/en-us/f/172/t/345224.aspx

Hi,
Based on my research, it shows Presence Unknown status if there are multiple users with same display name in the Address Book. We can try right-clicking the Author and select Edit Property, and then selecting the correct name from Global Address
Book.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

ATI card not recognised

Hi all
I have New Macbook Pro 15inch bought 2 months ago. I upgraded to new OSX Lion however I just noticed that the ATI card does not have a display attached to it and the computer is running on the built in Intel Graphics. As a result the animations have become really choppy. Is there any way to get the ATI card recognised? Why does it not have a display connected to it? I haven't done anything to the computer except for the official updates.
please help
Amit

Resolved the issue: Energy saver option automatically shifts the graphics performance to intel builtin chip.

Can I buy more iCloud storage with an iTunes gift card?

When I try to purchasemore storage with my iTunes gift card, it says unknown error occured.

Welcome to the Apple community.
I don't believe that you can purchase additional storage with gift cards. Additional storage will be an annual subscription, Apple will need to know how you are going to pay next year and every year after that.

SD card reader prob with L530 on Win 7

this forum is so crowded, incredible. sorry to say that. have a serious prob with the integrated SD card reader with my L530 on Win 7:
- not showing in device manager with/without card
- not showing in explorer, when card inserted (tried different cards, no worries)
- installed all available lenovo&win7 card reader driver, no change
- not even LED light flickering or anything, just off, no function
- no option in power management to enable card reader (as suggested in some forums)
would be a shame if i couldnt use the in-built lenovo hardware.
thanks for help
klingsor

Hi, klingsor
I would firstly make sure that the Card Reader is enabled in BIOS. This can be done by entering BIOS (hit Enter at splash screen, then hit F1 when the menu pops up.) From here, select Security and then I/O Port Access. Make sure the Card Reader here is set to Enabled.
I would also recommened making sure your BIOS has been updated, as this can sometimes cause some issues with peripherals not working as intended. The latest version can be found here.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Can't get PCI 6024E card recognized by LabView

Window's Device Manager sees the card as an unknown PCI. I have tried removing the card, rebooting, and then replacing the card. I can't find any driver (.inf) files for the 6024. Is NI-DAQ the driver? NI-DAQ will just not see the card at all (even when I hit F5) My system information is below:
National Instruments Technical Support Form (Version 2.1.3.14)
Generated: Tuesday, July 19, 2005 11:29 AM Eastern Daylight Time
User Information:
Registered Owner: C. J. Martoff
Registered Organization:
Address:
City:
State:
Country:
Postal Code:
Phone:
Fax:
Email:
System Information:
Operating System(OS): Microsoft Windows 2000
OS Version: 5.0.2195
OS Info: Service Pack 4
Processor: Pentium
Number of Processors: 1
Physical Memory: 1,047,856 KB RAM
Drive C:\ 377,342 of 3,413,781 KB free
Drive D:\ 2,124,316 of 2,870,012 KB free
Drive F:\ 192,982,900 of 199,141,708 KB free
NI Software Information:
CVI Run-Time 5.10.4.0
ComponentWorks
     3D Graphs Controls 1.0.430
     DataSocket Controls 2.1.445
     IMAQ Controls 1.0
     User Interface Components 3.0.1.549
IVI Engine 1.1
LabVIEW Run-Time 5.1
LabVIEW 5.1,FDS,English
Measurement & Automation Explorer 2.1.3.14
NI Spy Version 1.2
NI-488.2 Software Version 1.30
NI-DAQ Version 6.9.1f28
NI-IMAQ Software ˆ
NI-PAL Software Version 1.4.5f0
NI-VISA 2.01
     NiViSv32.dll 2.0.0 (Build 16)
     visa32.dll 2.0.0 (Build 16)

Hey MPM,
Since Windows recognized the board as a PCI device, it sounds like a
general driver error. The NI-DAQ driver would be needed to
communicate with Measurement and Automation Explorer (MAX) and
LabVIEW. For LabVIEW 5.1 the current available version is NI-DAQ
6.9.3. I would recommend doing the following.
1. Uninstall the current version of the drivers.
2. Shut down the computer and remove the PCI-6024E.
3. Reboot the computer, download and install NI-DAQ 6.9.3, which is available at ni.com/downloads.
4. Shut down the computer and resintall the PCI-6024E.
Once you reboot, you may be prompted with the found hardware
wizard. Once it is completed, the board should be available in
MAX and LabVIEW.
Andy F.
Applications Engineer
National Instruments
National Instruments

Disable my airport extreme card

hello all. i have recently bought a WN825 pcmcia card for my powerbook g4. It has a broadcom chipset so when plugged in it tricks the airport software into thinking its an airport extreme card. The problem is having two wireless cards connected at the same time causes a conflict and i often get problems when booting up.
naturally, i have tried to disable airport via the main tool bar but it also disables the pcmcia card. i basically need to disable the airport extreme card but keep the airport software running so that it recognises my broadcom third party card. (recognised as cardbus). i have also tried to disable port config in prefs, but again this disables airport completely.
i have searched discussions and found only 1 archived post on this which didn't help. there must be a way of doing this?
any help much appreciated.

Here you go:
If you have an original Airport card installed and don't want to remove it, go to:
/System/Library/Extensions
Rename the following files by adding the suffix ".disabled" to each:
AppleAirPort.kext
AppleAirPortFW.kext
Remove the following kext cache files:
/System/Library/Extensions.mkext
/System/Library/Extensions.kextcache
Reboot.
The above is a summary. You must do this in a Terminal window and you must use sudo thusly:
sudo tcsh
Password: <<yourAdministratorpassword>>
cd /System/Library/Extensions
mv AppleAirPort.kext AppleAirPort.kext.disabled
mv AppleAirPortFW.kext AppleAirPortFW.kext.disabled
rm Extensions.mkext
rm Extensions.kextcache
<Control-D>
Close the Terminal window
Reboot.
Caveats: You could screw up a lot of things easily if you do anything else while root in a Terminal window. BE CAREFUL.
Remember, it's YOUR PowerBook G4, not mine and hence your risk.

Vic card not initializing

I have recently got a router - 1751v
and also a voice card - vic-2fxs
The card is not getting initialized
amber light is glowing contineously
error showing card not initializing, unknown hardware found in slot1.
here is the sh tech support details of the router
the card is vic-2fxs
------------------ show version ------------------
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV8Y-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 14-Apr-05 19:25 by yiyan
Image text-base: 0x80008120, data-base: 0x81190E44
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-SV8Y-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)
yourname uptime is 4 minutes
System returned to ROM by power-on
System image file is "flash:c1700-sv8y-mz.122-13.T16.bin"
cisco 1751 (MPC860P) processor (revision 0x400) with 83979K/14325K bytes of memory.
Processor board ID FOC08310YEZ (1669471188), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
------------------ show diag ------------------
Slot 0:
C1751 1FE VE DV Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 4.0
PCB Serial Number : FOC08310YEZ
Part Number : 73-7241-04
Board Revision : B0
Fab Version : 04
Product Number : Unknown
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 02 4D 41 04 00 C1 8B 46 4F 43 30 38 33
0x10: 31 30 59 45 5A 82 49 1C 49 04 42 42 30 02 04 FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Packet Voice DSP Module Slot 0:
Hardware Revision : 3.2
Part Number : 73-6726-01
Board Revision : A0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : VIC09267FBE
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 02
Number of DSP's : 1
DSP memory size(in kwords): 256
Type of DSP : TMS320C549
Product Number : PVDM-256K-4=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 02 AC 41 03 02 82 49 1A 46 01 42 41 30
0x10: 80 00 00 00 00 02 03 C1 8B 56 49 43 30 39 32 36
0x20: 37 46 42 45 03 00 81 00 00 00 00 04 00 09 02 FF
Packet Voice DSP Module Slot 1:
Not populated
WIC/VIC Slot 0:
Serial 2T (12in1)
Hardware revision 1.0 Board revision D0
Serial number 0024047013 Part number 800-03181-01
FRU Part Number WIC-2T=
Test history 0x00 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 12 01 00 01 6E ED A5 50 0C 6D 01 00 00 00 00
0x30: 68 00 00 00 00 10 12 00 FF FF FF FF FF FF FF FF
can anyone pls help....

are you sure it is a vic-2fxs and not a vic2-2fxs ?
If so then either a defective card or you may have a counterfeit card (they are out there ) does card have a sticker on it that shows an american flag and made in USA ? if so it is a counterfeit card. If it is a vic2-2fxs you cannot use it in a 1751.

T400 Card Reader?

The order form calls it a 4 in 1 card reader for the PC Card slot, but it seems like it only takes SD cards.
Does anyone know the story on this?
Thanks.
T400, 2.8Ghz T9600, 3GB PC3-8500 DDR3, 320GB HD, ATI Mobility Radeon 3470 256MB, 14.1 WXGA+ LED, 6 cell, Vista Business SP1 32bit, Fingerprint, 2Gb turbo HD cache, DVD Recordable, Intel WiFi Link 5300, bluetooth, card reader
Solved!
Go to Solution.

Hello,
which os your are using and also are some other cards recognised?
What tells vista to you if you insert another card?
Greetings
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Voice card not initializing

I have recently got a router - 1751v
and also a voice card - vip2-2fxs
The card is not getting initialized
error showing card not initializing, unknown hardware found in slot1.
is there any patch for the card to be initialized
pls reply

Hi Amit,
Thank you for ur response
here is the sh tech support details of the router
the card is vic-2fxs
------------------ show version ------------------
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV8Y-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Thu 14-Apr-05 19:25 by yiyan
Image text-base: 0x80008120, data-base: 0x81190E44
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-SV8Y-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)
yourname uptime is 4 minutes
System returned to ROM by power-on
System image file is "flash:c1700-sv8y-mz.122-13.T16.bin"
cisco 1751 (MPC860P) processor (revision 0x400) with 83979K/14325K bytes of memory.
Processor board ID FOC08310YEZ (1669471188), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
------------------ show diag ------------------
Slot 0:
C1751 1FE VE DV Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 4.0
PCB Serial Number : FOC08310YEZ
Part Number : 73-7241-04
Board Revision : B0
Fab Version : 04
Product Number : Unknown
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 02 4D 41 04 00 C1 8B 46 4F 43 30 38 33
0x10: 31 30 59 45 5A 82 49 1C 49 04 42 42 30 02 04 FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Packet Voice DSP Module Slot 0:
Hardware Revision : 3.2
Part Number : 73-6726-01
Board Revision : A0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : VIC09267FBE
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Processor type : 02
Number of DSP's : 1
DSP memory size(in kwords): 256
Type of DSP : TMS320C549
Product Number : PVDM-256K-4=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 02 AC 41 03 02 82 49 1A 46 01 42 41 30
0x10: 80 00 00 00 00 02 03 C1 8B 56 49 43 30 39 32 36
0x20: 37 46 42 45 03 00 81 00 00 00 00 04 00 09 02 FF
Packet Voice DSP Module Slot 1:
Not populated
WIC/VIC Slot 0:
Serial 2T (12in1)
Hardware revision 1.0 Board revision D0
Serial number 0024047013 Part number 800-03181-01
FRU Part Number WIC-2T=
Test history 0x00 RMA number 00-00-00
Connector type PCI
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 12 01 00 01 6E ED A5 50 0C 6D 01 00 00 00 00
0x30: 68 00 00 00 00 10 12 00 FF FF FF FF FF FF FF FF
can u pls help....

Audigy2 unknown dev

hello.
recently got me an audigy2 to replace a broken audigy but have a problem with it.
my computer is on 24/7 and for some reason the card becomes an "unknown device" after the computer has been on for some time.
a reboot fixes it temporarily.
sound playes fine games works great sorrundmixer no problem.
the problem comes when i try to start graphic equlizer and i get a window claiming i dont have the card installed but the proram worked just fine earlier.
msi k8n sli-fi
leadtek tv2000 xpert
nvidia 7800gt
antec truepower 380w S
geil pc4000 2x52mb
amd64 3200+
ibm deathstar 30gb + hitachi 60gb
made a fresh install of windows xp sp2 before i added the audigy2 card.
Regards
Raven

Rockerz, nope not using xp64 using xp32 sp2 and have no unknown devices or exclamation marks.
petersian, not a stupid suggestion if you ask me.
meet many people having trouble with creative cards on nforce2 boards, only pci slot 3 works good there.
and yes tried all 3 pci slots and no difference whatsoever between them.
only had the problem once during during the last week.
starting to suspect it might be gta san andreas acting up as the sound isnt released as it should when i turn off the game.
movies and music sounds ok but the sound from the tv-card which comes in as aux sounds...weird and only a reboot hel
ps.
Message Edited by Raven_ on 03-9-200607:20 PM

Mountain Lion/SD Card reader

MBP Early 2011 running 10.8.
Had no issues with Lion, since upgrade cannot get my SD cards recognised.
Reader shows up in hardware;
Built in SD Card Reader:
Vendor ID:          0x14e4
Device ID:          0x16bc
Subsystem Vendor ID:          0x14e4
Subsystem ID:          0x0000
Revision:          0x0010
Link Width:          x1
Link Speed:          2.5 GT/s
But cards are not being seen. Restarted the Finder, ensured that Finder preferences has everything switched on to display - both on sidebar and on desktop, rebooted my Mac, tried "wriggling" and reinserting multiple times the cards. All recognised as usual in my other computer and cameras. Nothing.
At this rate I am going to have to buy an USB card reader, I have seen a couple of other people here with the same problem but no fix.
Anybody got any more ideas?

Thanks for the tip - I tried it but no difference for me. I have even dug out my can of air (aerosol especially for blowing dust from electronic components) and give the reader a good blast.
I used to use the SD slot every couple of days, never had any reliability issues with any of my cards, and literally the day after I installed mountain lion I couldn't use the reader at all. Not a single card works.
If there is something in there it is well wedged. Next step is going to have to be to pull apart the macbook and see if I can get to the card reader and see if it can be pulled apart. Anybody got any tips on this?
And no I don't have AppleCare and this is an early 2011 model so out of warranty...

GX720 Firewire Chipset type & 64 bit drivers

Hello all you MSI tech Guru's
I have a couple o quick questions about the FireWire port in my GX720.
my story is this:
I have had to install Win 7 64 bit on my GX720, as some of the applications i work with require a 64 bit OS for them to function correctly (not for the extra ram, they will not install in a 32 bit OS)
I realize that there is no official support for Win 7 64bit on this model of notebook, but using generic drivers, I have gotten 90% of it working (only the intel mass storage, TV cards and 1 "unknown device" are missing drivers).
pretty much everything is working exactly how I'd expect it to in the 64bit environment (including basic use of my FireWire port), however.....
I also run a high('ish) end FireWire audio card (A MOTU Ultralite MK3 for those keen on sound) and am having some unusual issues with it (freezing of audio playback in multiple applications every couple of seconds ), after chatting to some audio experts, they have indicated that the issue may be with the FireWire chipset on the notebooks main board or the FireWire driver for the notebooks Chipset (I am exploring the audio cards role in this error too and an email has been sent to MOTU tech support).
Can anyone tell me:
a.) what the firewire controller chipset make (eg. Texas Instruments, Ricoh, Intel, ect....) & model is ?
b.) is there a generic win7 64bit driver that can be installed for it (instead of the default one that windows uses) ?
Thanks in advance, Kind regards
-Hypalync

Quote
b.) is there a generic win7 64bit driver that can be installed for it (instead of the default one that windows uses) ?
Windows already includes a generic FireWire (IEEE1394) controller driver. There is nothing else to install or update.

DAQCard6024E - Win7 - Card recognised as "Unknown"

Similar Messages

Maybe you are looking for