DAQMX 8.5 and windows XP

I am installing Labview on a fresh hard drive and noticed that DAQMX is up to 8.5 for the release of Vista. Has anyone had any problems with this version and XP?

Downloaded yesterday on two XP Pro machines, working fine for me. Suggest you do a disk defrag after installation, it made my drive bleed red.
Release notes state it is for:
NI-DAQmx for PC Compatibles, version 8.5 for Windows Vista x64 (64-bit) / Vista x86 (32-bit) / XP / 2000
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Similar Messages

NI DAQmx 14.2 and Windows 7 embedded

Hello,
I try to install an application using labview 2014 with an acquisition device NI USB-6251 on a Windows 7 platform brand new embedded.
The problem is it seems the installer refuses to install DAQmx 14.2 on this machine, I just get the following messages:
(See the images below)
Whenever I confirm Insatallation to continue to the end.
When the PC is restarted, the NI USB-6251 device is not recognized either by windows or by MAX. (Not valid drivers)
I transferred the driver manually (nixsrkw.sys) of a PC that works with the device in the path I indicates the installer plug and play windows (Windows / system32 / drivers), without success! (No valid driver)
I tried several installer configuration, nothing happens, I have to wonder if NI DAQmx14.2 is compatible with Windows 7 Embedded ...
Thank you for helping me a bit if you have already encountered this kind of problem, I do not understand what blocks the installation of the USB driver.
Sorry for my poor English
Greetings to all.
Lionel
Attachments:
AFL-W07A_Pb_Install_00.png ‏28 KB
AFL-W07A_Pb_Install_01.png ‏29 KB
AFL-W07A_Pb_Install_02.png ‏29 KB

Hello Miello,
Thank you for your answer, I just tried the "run as Admin ..." with the right button, with the same problem in the end.
It is true that this manipulation is not well documented in Windows 7.
I'll try the same installer with a machine running Windows XP embedded, I'll let you know.
If the installation succeeded this clearly show that the problem is on the Windows 7 side, otherwise the problem is in the application builder or modules ...
To be continued ...

Daqmx error 200547 and 500247

Hi all,
Iam working on the pci-6723 and labview7.1 and daqmx 7.3 version software,when iam running the following attached programme iam getting 2 errors
1.200547 daqmx write fails
2.500547 transfer didnot complete within the specified timeout period
actually iam generating 2 dynamic sine wave on 2 channels and 2channel dc voltages and one digital 8 line and iam using visa for serial acquiring data
since the project is black box for the aerospace applications iam receiving serial data of 130 bytes/sec
continuously iam sending the generated voltages to my black box and receiving back and displaying on the front pannel during this time iam getting error
kindly help me , when i start running the programme continuously for 30min t
hen this error flags how to overcome this error.
if i restarted the nidevldu and nipxmru dlls of windows 2000 then its working again the problem persists , whether my hardware gone bad kindly suggest me
regards
rajesh
Attachments:
pci-6723 ‏320 KB

Hello Rajesh,
I took a look at the code you sent me, and noted a couple of things on the DAQ part of your code. The first thing is that in the DAQmx Write VI, you have the auto start terminal set to True (Is there any reason for this?) For multiple sample output, the auto start terminal should preferably be set to false. This is because additional timing must be configured when outputting multiple with the DAQmx Timing VI and the DAQmx Start Task VI and the DAQmx Stop Task VI myst also be used.
The second thing I noted is that you have your DAQmx Write inside a while loop. Are you doing this because you want to write new data to the buffer with each loop iteration? If so, use a Write property node and select the Regeneration Mode property and set it to not allow
regeneration. You need to make sure you generate new data fast enough to prevent the buffer from regenerating old data. This situation is similar to performing a continuous buffer acquisition (You must make sure you read the data out of the buffer fast enough to prevent the data from being overwritten.)
Please let me know if this suggestions helped or if you have any additional questions about them. Have a great day!
LA

Problem with Sessions and window.open

Hi,
Hi everyone,
Help Please!!!
I am working with Sevlet session objects and HTML forms and windows. I have an HTML form for the user to supply a username and password. Once the user clicks submit I need to open another browser window that has no toolbar, no location, no status bar, etc. The user should also be able to go back to that login screen and login again and open a 2nd, 3rd, etc. instance of the application. My problem is that each application is being asigned the same sessionId. I believe it is being asigned to the main login window and thus to the other child windows it opens. Is there a way to work around this? Do I need to make the user open another browser window to login? I need to be able to let the user open multiple instances of the application with unique session ids for each.
Any insight is GREATLY appreciated on this topic. Anything you can tell me about sessions (Java), IE, window.open would help greatly!
THANK YOU IN ADVANCE!!!
MA

To achieve this, you must introduce another level of
abstraction to the Servlet specifications. When you
work with JSP/Servlets you use mostly the HttpSession
to handle user related tasks, and the aplication
context, for things that are common to all users. But
inside the HttpSession scope, you want to create
containers that have 'smaller' scope and are uniquely
identified.
A ipothetical scenario :Let's say that you must have
multiple connections to several databases, on each
database user rights beeing diferrent, and you must be
able to track user actions globaly, and eventualy
capture a 'Close Application event' and close all db.
connections.
1. when the user first accesses the login frame create
the HttpSession. In the HttpSession object, store a
Hastable (let's call it 'ConnectionTable'). Each
object in the Hashtable must identify uniqely a
database connection. Now, to create unique identifiers
ids, make the keys in the hashtable java.lang.Long
objects, created using System.getCurrentTimeMillis().
This guaranties there will be no possible confusion.
From each new open window, on each request to the
server, along with the usefull parameters, send the
connection identifier. When proccessing the request,
select the object from the Hastable wich corresponds
to the ID.
2. Now, the values in the ConnectionTable, must act as
the containers that I mentioned in the first
paragraph. The simplest way to do this is to have
again a Hashtable derived class to do the job, wich
exploses methods similar to HttpSession: setAttibute (
Object key, Object value) and getAttibute ( Object
key, Object value). This container may use internally
a Hashtable to store object, and explose only the
getAttribute and setAttribute methods for clarity. Any
way, this is a problem of implementation. Let's call
this class CustomSession.
Now, a textual activity diagram:
1 user accesses the main page, you start a new
HttpSession; In the HttpSession object, store the
ConnectionTable object.
2. the user enters the userID and pwd and adatabase
name, and a new window is opened. Let's supose the
data entered is valid.
3. when you process the login data, you create a new
CustomSession object. you put in it whatever you would
put in your HttpSession. You generate a unique
identifier using System.CurrentTimeMillis(). Put the
CustomSession object in the ConnectionTable, using the
generated id as key. Send the response.
..... later on .....
100. the user asks for a particular action to be
performed - e.g. a row deletion. The page contains a
form with text field where the user introduces the
row number, a submit button and a hidden input with
the ID.
101. you process the data. Get the ID from the request
object, get the ConnectionTable from the session, get
the CustomSession using the ID as key, do whatever
your logic was doing, but obtaining the objects from
the CustomSession instead of HttpSession
NicNic,
Very slick idea. I think that it could work and it seems that there would be not security issues because the id that you would store on the client side is the Unique Identifier and not the actual Session Id. Do you forsee any security issues for this implementation?

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

IPhone 5 iOS 6.1.4 and Windows 7 x64 USB Driver Issues

Been pulling my hair out with this one for the last week or so and haven't had any luck finding anything on the forums or the web regarding a solution short of a full reinstall of Windows 7 which I am not prepared to do at this time; so hoping someone here can shine some light on this for me
I have a iPhone 5 that is updated to iOS 6.1.4 and a recently built Windows 7 64-bit machine. All of my other USB devices function fine (keyboard, mouse, Xbox 360 wireless receiver for Windows, and a Seagate 2TB external USB drive). I've downloaded the most recent version of iTunes, installed successfully and then attempt to plug in my phone to sync. I get the standard Windows *ding* that I've attached a device and 1 of 2 things happens (I haven't been able to determine what causes one reaction to happen versus the other): Windows will successfully install the 'Apple USB Mobile Device Driver' successfully and it will appear under my USB devices in Device Manager. However - iTunes will not recognize the phone and I cannot see it in Windows either. In the 'Devices and Printers' snap-in my iPhone will appear under 'Unspecified Devices' as the 'Apple USB Mobile Device'. The iTunes diagnostics fail to find a connected device so the tests fail. As soon as I unplug the device, the strangest thing happens: Windows will start trying to install a device driver and after a few seconds it will fail stating that the "MTP Device Driver" installation failed because the device was unplugged. iTunes also thrown an error "iTunes cannot connect to this iPhone" throwing error code 0XE8000065 (I've also seen error code 0XE8000085 as well)
After some finagling, I've managed to get Windows to recognize the device under 'Portable Devices' in Device Manager as an "MTP USB Device" using the generic driver. At this point, I've tried updating the driver and manually specifying the Apple USB driver located in the C:\Program Files(x86)\Common Files\Apple\Mobile Device Drivers which updates successfully but then changes the device to "Apple USB Mobile Device" and moves it under the USB Devices in Device Manager; and Windows nor iTunes can see it even still.
I've tried removing iTunes several times and ensuring that all remnants of the installation are gone (registry and folders on the installation drive) and have disconnected all my USB devices short of the keyboard and mouse and still I get the same results. At this point, I'm afraid that a re-install of Windows is going to be the solution; but it's a drastic one (I have a SSD drive where Windows is installed along with all of my games for faster load times/better performance and do not want to have to redownload\reinstall all of them) and I'm not prepared to undertake it at this time, which is why I'm posting here
I've used a utility called USBDeview that sees my phone is connected - so I know from a functional standpoint that my USB ports are good and working. I also know the cable is good too - my daughter's PC (Windows 7 32-bit with NO iTunes) immediately sees the device when I plug it in, installs the drivers, recognizes it as an iPhone and I can then see/browse it in Windows Explorer like I would normally expect. My work PC (Windows 7 64bit, NO iTunes) sees the device just fine as well. I would immensely appreciate anyone that has seen this issue or has any additional solutions I can try.
It's also worth mentioning that I've never used Kapersky antivirus so the UPPERFILTERS value in the registry that I've seen as a solution on some forums is not present on my machine. I'm using Microsoft Security Essentials as my antivirus (no flaming please lol - it meets my needs and is extremely lightweight, which is why I'm using it on a gaming rig) and it's not indicating any issues. I've also tried running iTunes as an administrator (even though my account is a local admin on the machine) and that does not have any effect either.
If there is anything I left out, please let me know; and I thank you in advance!

AphexTwin wrote:
- no Apple input?
Of course not. Didn't you bother to read the TOU of this forum? This is a USER TO USER technical support forum. Apple doesn't post here.

IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

ITunes and Windows 8 Home Sharing (Possible Fix)

If this fix has been posted elsewhere then I apologize, but I wanted to share what I stumbled on as a possible for for iTunes Home Sharing and Windows 8. I did a lot of port forwarding, both on my router and my Norton firewall, but nothing seemed to help. After a few minutes my Apple TV and iOS devices would stop seeing my iTunes library. The only way to fix it was to reboot the router.
On a whim I looked in my Device Manager and found under Network Adapters a device called Microsoft Kernel Debug Network Adapter. I disabled this, rebooted my computer, and have since no issues with Home Sharing. It's only been a few hours, but that is the longest I've gone since installing Windows 8. I'll look in the morning to see if it still works.
So give this method a try and see what happens. Hopefully it will fix your problems.

Here are the three steps I took to get Home Sharing working successfully on Apple TV. This has worked for the better part of a week so hopefully it will work well for others.
In your software firewall create two new Inbound Rules. Open port 3689 (TCP) and port 5353 (UDP) to All Programs.
If your hard drive goes to sleep after a certain period, be sure to change to something greater than 30 min. (Control Panel -> Power Options -> Change Plan Settings -> Change Advanced Power Settings -> Hard disk -> Turn off hard disk after -> Setting)
On your Apple TV change when it goes to sleep. I changed mine to 10 hours.
This seems to keep the connection alive. On occassion it will look like it gets stuck loading, but just let it go. At some point it wil kick on. If you generates a connection error just try loading the media again and it should start.

Software and Windows 8

Hi there, can somebody PLEASE tell me how i can download the desktop software for my pc. I have a Blackberry 9300 and Windows 8 on my pc!!! URGENT

I would recommend the most recent Desktop Software, version 7. Download it here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

RemoteFX and windows 8.1

Hello,
I am currently running a VDI environment with server 2012 servers including a RDCB, RDVH, RDSH, RDWA and windows 8 clients. I am using remoteFX on the windows 8 clients with the help of 3 nvidia Quadro 6000 cards. RemoteFX works perfectly in windows 8; however,
I built a windows 8.1 VM and remote FX will not work in this VM. When I log on to the vm and look under device manager the remoteFX device is listed but it gives an error of 43. All of the vm's have one monitor set in the remoteFX settings. In the event viewer
of the windows 8.1 VM I am getting an error under RemoteDesktop Services vGPU-kModeDriver "The virtual GPU synthetic devie failed" and the other accompanying error is "The RDVGM kernal mode driver failed to start" I have removed all of
the windows 8 VM's to confirm that all of the available memory of the GPU was not used and this didn't get any different results. The only difference I see is that one guest os is windows 8 and the other is 8.1. Does remoteFX not work in windows 8.1 by chance?
Both OS's are Enterprise as well.
Thanks for any help,
Scott

Hi Scott,
Sorry for the late.
I think the edition of win8 VM that has been enabled RemoteFX is enterprise .
(To use RemoteFX , guest os on hyper-v host should be enterprise edition )
For details please refer to following link:
http://blogs.msdn.com/b/rds/archive/2012/11/26/remotefx-features-for-windows-8-and-windows-server-2012.aspx
Best Regards
Elton
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

RH10 and Windows 8.0/8.1

Hi Everyone,
Please can some advise what the current state of play is with RH10 and windows 8.0 and window 8.1.
i.e does it work properly?
I am expecting to be asked to document a package running under window 8.0 or 8.1 shortly wondered if my copy of RH 10 will still work ok for this? Our main output format is web help.
Secondly when is the next version of RH due that is compatible with office 2013?
Thanks

Thanks Willam, it was more about the version that ships than the versions that can be installed that I wanted to clarify.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Reader and Windows 8.1 FULL SCREEN?

Is there a way to view a document in Reader and Windows 8.1 other than on FULL SCREEN. In previous versions, I could look at a.pdf file while working on another file on my computer screen. This allowed me to get info from the .pdf file and input into the other program.

It might be that you're viewing with an app written to Microsoft's new and exciting "modern" interface which is always full screen. Apparently it's much better and more exciting.
Microsoft Reader comes with Windows 8 and runs that way. Adobe also offer "Adobe Reader Touch" which runs that way.
Some of us old dinosaurs who think it might be neat to arrange multiple apps so we can do more than one thing at once like to run the "legacy" apps like Adobe Reader.

Iphone and windows 8 compatibility?

When is apple going to fix the iphone and windows 8 compatibility? All I get is the "waiting for changes to be applied" message. I can't sync my phone.

I have no issues with Win 8 working fine with the latest (win 8 compatible )
iTunes

Deduper and windows 8

I'm having trouble using the deduper and windows 8. I have the latset itunes. I keep getting an error message
Line:691
Char 691
error invalid prcedure call or argument
code 800A0005
source microsoft vbscript runtime error

Hi. I presume you're referring to my DeDuper script. Checking the live copy of the script the most likely cause of the error would be that the object it is supposed to be working with no longer exists. This can happen if you run the script on a regular playlist that has more than one instance of the same object. I'm working on a new version that will be more robust but until then it would be best to run the script on the main Songs view or a smart playlist as these will only contain one reference to each unique iTunes object.
If you think something else is happening please let me know.
tt2

DAQMX 8.5 and windows XP

Similar Messages

Maybe you are looking for