DAQmx C Reference Help file pack?

Hi all,
I'd like to download the latest version of DAQmx C Reference Help file pack.
Where can I find it?
Thanks
- George -
Solved!
Go to Solution.

Hi George,
If you download and install the latest DAQmx driver from http://www.ni.com/support/daqmx you can install it and you will get the C reference help with it. After installation you can find the C reference help at Start->(All )Programs->National Instruments->NI-DAQ->Text-Based Code Support->NI-DAQmx C Reference Help
I think, you cannot download directly only Reference Help packet for the newest version of DAQmx (9.3 now). You can download the latest DAQmx 3.x Base C reference directly (http://digital.ni.com/manuals.nsf/websearch/C4B5B92E74F160C6862574560065F8BC), but it is from 2008 June.
I hope my reply is an aswer for you question. If you have any other question, feel free to write again.
Regards,
Peter
Peter Vago
AE Hungary

Similar Messages

Where can i find the Adobe Reader Reference Help File in french...?

Where can i find the Adobe Reader Reference Help File in french...?

Hi JackTatSykes
Download the reader X MSI from the below link : ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.0.0/en_US/
Reader XI : ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/

Whre can I find "Traditional NI-DAQ C Reference Help" ?

In NI-447X User Manual I have found in "Related documentation" paragraph the suggestion to read "Traditional NI-DAQ C Reference Help" for traditional NI-DAQ version7.0 and later. Where can I find this manual?

To view the NI-DAQ reference help, go to Start » Programs » National Instruments » NI-DAQ and select the appropriate file for the version of NI-DAQ that you are using.
For NI-DAQ 7.0, there are separate reference help files for NI-DAQmx and Traditional NI-DAQ, the NI-DAQmx C
Reference Help and the Traditional NI-DAQ Function Reference Help.
TN

B1DE usage help file

hi every one,
                 Can any tell me VB-B1 addon wizard detailed usage help file
                  SAP-B1 addon installer.net wizard detailed usage help file
                  VB-B1 addon istaller setup.net detailed usage help file

Varma,
Apologies ... I am not sure what you are asking. When you install the Business One Development Environment, you get Help File, Documentation and Class Reference Help File icons added to the B1DE Program Group as well as there is a "B1DE.doc" Word document placed in ...
..\Program Files\SAP\SAP Business One Development Environment
This is all of the information on B1DE.
Eddy

WaveStudio 7.12 (and/or Audio Pack for MP3 Support) product Help files

WaveStudio 7.2 product Help files (CTWAVE32.CHM) need to be revised to incorporate MP3 support, for those customers (like me) who have purchased the Audio Pack app for MP3 Support.
-OR-
Am I supposed to?just use the old WaveStudio 5.00.2 Help files (CTWave32.hlp)?
Also, there doesn't seem to be any way of uninstalling WaveStudio 5.00.2, unless I uninstall the whole suite of Creative MediaSource software... And that doesn't seem like very much fun at all... ? So, what, should I just leave WaveStudio 5.00.2 on the machine?

JRe: WaveStudio 7.2 (and/or Audio Pack for MP3 Support) product Help files?For anyone else experiencing this issue, the answer is:? Can't do it!? WaveStudio 5.00.20 can not be removed as a "stand-alone" application. The reason is, it's not listed as a separate program in Control Panel's Add or Remove Programs, and WaveStudio 5.00.20 has no Uninstall option.
Furthermore, WaveStudio 7.2 doesn't seem to overwrite the earlier version (it's still there and for some odd reason, it still works).
In order to remove the old version of WaveStudio, you must remove whichever Creative application that version of WaveStudio came bundled with.? Then, when you reinstall that application, WaveStudio 3.0 (or whatever iteration that application contained)?comes right back.
Therefore, the answer seems to be, you have to?li've with two versions of WaveStudio on the 'puter:? 7.2?and whatever earliest version the original bundled software?came with on the Soundblaster disc. Sad, but apparently true!? So, good day!? :smileytongue:

Wht does lv7 help files for DAQmx lockup?

I am trying to obtain help for the DAQmx vis in LV7 and the help files "hang", take for ever to load and sometimes lockup LabVIEW. Also, when they do load, the pull down selector does not work properly and causes the help file to lockup. Is there a fix for this problem?

If you are currently running NI-DAQ 7.0 or 7.1, download NI-DAQ 7.1. This new installation will include new help documentation that will overwrite the existing files on your machine which may be corrupted. Here is a link to the NI-DAQ 7.1 download page: http://digital.ni.com/softlib.nsf/websearch/C1F802E457EA042586256DD00001B0C9?opendocument&node=132060_US
Regards,
Bill B.
Applications Engineer
National Instruments

How can I reference an external help file from context sensitive help at the control level?

My goal is to provide context sensitive help for each control displayed on the front panel using a help file created externally. I know that at the VI level I can specify a Help Path; I want the same behaviour for each control inside a VI. I also know about creating a custom control and specifying the Help Path in there, but it doesn't help in this situation, for I have hundreds of controls in my application and I cannot go back and replace each one with a unique .ctl. If I could override each instance of the custom control with unique path data that would do the trick, but that's not how it works.
Is there a way to add the Help Path information to regualr controls?
-euge
ne

This functionality is not yet built into LabVIEW.
About all you can do is cut and paste the help for each control into the description for the control. It is tedius but a finite task.

File:reference help

how do i get the dialog box to open only once and have
multiple files downloading. I dont want to use zip or any
compression folder types.
This is for a standalone player

look at the help files for the fileReference class, it's
pretty straight forward. copy the example and try to get it to
work. then mold it into your project. the mulitple files is tricky
but there are tutorials on the web about it...

How can I open help file (HTML or .chm) from Java Web Start (new to JAVA)

Hi All,
Im trying to open the help file of my application.
When trying to access the help file from the GUI (pressing F1 for launching the help file), I'm geting the an error, something like:
"Can't show help URL: jar:file:C:\Documents and Settings\%USER%\Application Data\Sun\Java\Deployment\javaws\cache\http\Dlocalhost\P7001\DMwebstart\RMjar-name!/com/resources/helpFiles/MyHelpFile.html"
It seems that the file which is packed in a jar, was downloaded to the Java Web Start cache directory:
C:\Documents and Settings\%USER%\Application Data\Sun\Java\Deployment\javaws\cache\http\Dlocalhost\P7001\DMwebstart
The code which is activated when launching the help file is:
try
            ResourceBundle resourceBundle = DoubleResourceBundle.getBundle("Resource", "ResourceImpl");
            RuntimeUtil.launchFile(new File(resourceBundle.getString("help.file")));
        } catch (IOException e)
            // TODO Auto-generated catch block
            e.printStackTrace();
        }where the property "help.file" is in some property file in the resource bundle named "Resource", and looks like this :
help.file="com/trax/docs/help/global/MyHelpFile.html"
The function "RuntimeUtil.launchFile" knows how to launch any file in its default application, and indeed it does launches the html, when giving it an absolute path to the file on my PC, as "C:\Helpfiles\MyHelpFile.html" as such:
RuntimeUtil.launchFile("C:\Helpfiles\MyHelpFile.html");My question is :
The application is going to be deployed on a Customer PC. How can I access the html file from the code, with a relative path and not its absolute path on the customer pc, which I can't know?
I found these restrictions regarding web start:
(copied from "http://rachel.sourceforge.net/"):
*Rule 1: Java Archives only. No loose files.* All your resources have to be packaged in Java Archives (jar) if you want to have
them delivered to the user's machine and kept up-to-date automatically by Java Web Start.
*Rule 2: No file paths.* You can't use absolute or relative file paths to locate your
jars holding your resources (e.g. <code>jar:file:///c:/java/jws/.cache/resources.jar</code>).
Absolute file paths won't work because you never know where Java Web Start
will put your jar on the user's machine. Relative file paths won't work because Java Web Start
mangles the names of your jars (e.g. <code>venus.jar</code> becomes <code>RMvenus.jar</code>)
and every JNLP client implementation has the right to mangle your names
in a different way and you, therefore, can't predict the name with
which your jar will be rechristend and end up on the user's machine in
the application cache.Seems complex or impossible, to perform a simple task like opening a file.
Please advise (I'm new to Java and Web Start).
BTW, I'm working with IntelliJ IDEA 5.0.
Thanks,
Zedik.
{font:Tahoma}{size:26pt}
{size}{font}

the follwing method i have used to open html file ...
so to access html file i am shipping resources folder with jar file ..
private void openHtmlPages(String pageName) {
     String cmd[] = new String[2];
     String browser = null;
     File file = null;
     if(System.getProperty("os.name").indexOf("Linux")>-1) {
          file = new File("/usr/bin/mozilla");
          if(!file.exists() ) {
          }else     {
               browser = "mozilla";
     }else {
          browser = "<path of iexplore>";
     cmd[0] = browser;
     File files = new File("");
     String metaData = "/resources/Help/Files/"+pageName+".html"; // folder inside jar file
     java.net.URL url = this.getClass().getResource(metaData);
     String fileName = url.getFile();
     fileName = fileName.replaceAll("file:/","");
     fileName = fileName.replaceAll("%2520"," ");
     fileName = fileName.replaceAll("%20"," ");
     fileName = fileName.replaceAll("jarfilename.jar!"," ").trim();
     cmd[1] = fileName;
     try{
          Process p = Runtime.getRuntime().exec(cmd);
     }catch(java.io.IOException io){
               //Ignore
can anyone give me the solution..???
Regards
Ganesan S

Is the help file wrong, or is it me?

Ok, so I am working through the help files, and am working on
"Enhancing the Hello World application", and I keep getting an
error message:
"1119: Access of possibly undefined property keyCode through
a reference with static type flash.events:Event."
Which is apparently having trouble with the following line of
code:
if (event.keyCode == Keyboard.ENTER)
The code is verbatim from the help file. I have checked
through and seen that keyCode does exist. Any thoughts?

Reify32207,
> I keep getting an error message:
>
> "1119: Access of possibly undefined property keyCode
through
> a reference with static type flash.events:Event."
What you need, in this case, is an instance of the
KeyboardEvent class.
The Event class, alone, doesn't have a keyCode property, but
KeyboardEvent
(which extends Event) does.
> textIn.addEventListener(KeyboardEvent.KEY_UP,
keyPressed);
> function keyPressed(event:Event):void
That second line is the culprit. Should be this:
function keyPressed(event:KeyboardEvent):void
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

Flash CS4 Help File Offline What Happened to Tag Defintions Showing UP?????

Ok I know I can set the help system to browse offline however
this doesn't work correctly for any less then ActionScript 3. When
you highlighted a word in the past such as "null" it use to pull up
the word and the info in all the books. Now all I see is a web
browser that doesn't do this for me. I mean who sits there at
adobe's end and thinks up of ways to slow someone down like this??
How can you remove the core help quick linking from the program.
Number 1 not everyone is on AS3 and some of us still have to update
AS2 code.
Bigspace ships has an air application that installed AS3 flex
reference but again useless unless you are on AS3. Has anyone found
another way to get this old school functionality to work on
CS4???

Jay Armstrong here. I’m one of the writers who works on
the Flash docs.
Regarding this comment and the many others in other threads
that have added important details about the issues with the help
workflow, and in particular the ActionScript help workflow: We hear
your pain and we are working to implement solutions to these
issues.
I understand that this new help workflow is more painful than
in CS3 when you had the Help right in its own panel in the product.
Here’s some background:
The implementation of Help within the Flash Help panel prior
to CS4 required that *all* the Help files be installed on the local
drive with the product, resulting in some issues that we tried to
address in CS4. Including Help on the installation disc caused
issues including:
- Required that Help be completed much earlier for
localization and end-game testing.
- Resulted in static Help files that had been completed early
in the development cycle, sometimes not accounting for last minute
UI or other changes.
- A long install process.
- Crowded the installation disc.
These aren't meant to be full explanations of why we made the
changes, but just some background as to some of the things we were
thinking about. Clearly the decisions we came to weren't the right
ones for many users. We are intent on making things better.
Moving Help online makes it possible to update Help on an
ongoing basis, allows users to comment on and embellish the Help,
and allows us to add links from the help out to new articles,
tutorials, videos, and code samples on adobe.com and throughout the
Flash web community. One of you rightly pointed out that the Adobe
Updater could have been used for some of this, but I believe that
the updater would have required much more rigorous certification by
us of any update packages and the update/install process for each.
We actually are updating the online help files very frequently, so
this process would have been a major barrier to these updates.
We’ve had a struggle about how to deliver the Flash
Help for a long time, as we have a lot of users who have been quite
vocal about not liking the Help panel consuming space within the
Flash window as well as users who really want it there so they
don’t have to leave the IDE.
Having said all that, I still totally understand what
you’re saying about losing your code, glance, code, glance,
code workflow. As you probably know, we’ve been getting a lot
of feedback about this, along with other issues that online Help
has caused. We are actively looking at ways of solving these, but
the Help-in-a-browser issue a difficult problem, as this aspect of
the Help implementation is baked fairly deep into the CS4 product.
Since CS4 shipped, we have implemented solutions to some of the
issues with Help raised by users, such as allowing you to select
the default destination of F1 (though Flash CS4 always went to the
actual Help system rather than the Flash Help and Support page,
which is what these users wanted in other products). I just
don’t know if there will be a solution in the CS4 time frame
for viewing Help within Flash itself. As noted in this thread,
there are a few independent developers working on non-browser help
viewers, such as Jamie Kosoy, Technical Director at Big Spaceship,
whose AIR application for the CS4 Language Reference docs is
available at
http://labs.bigspaceship.com/2008/12/09/air-app-as3-language-reference/.
We knew that people use the AS3 Language Reference a lot, so
we did install a local, abridged version of that with the product.
You only see it when not connected to the internet or if you
disable online connections as described earlier in this thread, and
it still opens in a web browser and still has the same navigation
interface as the online version. You can also download a local copy
of the AS Reference, which does get updated periodically and can be
viewed locally regardless of the state of your internet connection,
but it also is all html and opens in a web browser. As previously
noted, the download is available here:
http://help.adobe.com/support/documentation/en/flash/10/ActionScript3LangRef.zip.
I know this thread started off with AS2 concerns, and we hear
those too.
In some of the other threads out there about the Help, people
have raised issues about the contents navigation in the CS4 version
of the ASLR as well. We are listening to all these issues and
actively working on solutions that will address these questions.
We’d really like to give you better control over whether you
see online or local content, whether you see it inside the IDE or
in a separate application, etc.
I know that you are all really frustrated at some of these
help changes, and so I want to say how much we appreciate your
feedback. I’m sorry that my reply doesn’t give you the
magic bullet that you are understandably hoping for.
-Jay

Help File Won't Update

I am having a problem in getting an updated help file to show up in the program execution. The help file is <program_help/index.html>, and shows up correctly in both the Resources and Products Groups in XCode. That is, after modifying only some text in the index.html file the modified index.html correctly appears in the XCode editor. The path to the index.html file is (correctly) unchanged in the Groups & Files list. The info.plist also remains unchanged.
After a clean/rebuild, the correct modified <program_help/index.html> is located in the Contents folder of <build/Release/program>. However, when program is launched, either within XCode or in the Finder, the Help file accessed via the Help menu has not been updated, i.e., the older unmodified version of the index.html file is displayed from within the program.
I am obviously missing something - any suggestions will be appreciated.

I agree that it is probably a cached file somewhere. I have not been able to find it, though. I have trashed the ~/Library/Caches/com.apple.helpui folder and any other files I've found that reference the program in ~/Library - but the wrong help file still keeps turning up.
I've even tried to explicitly modify the com.apple.helpui/TOCCache.plist entry for the program with the pathname to the correct help file, but as soon as I call the help file in the program the TOCCache.plist file entry reverts to the the old version of the help file in an earlier version of the program.
I doubt that any of these exercises should be necessary, though. There must be some setting in XCode that should take care of getting the correct reference for the help file. I've looked and can not find anything at this point.
One step I will eventually take is to remove all possible sources of the old help file and then see what happens.

Please fix the Robohelp bug related to supporting underscores (_) in the help files (*.chm)

There are 10 module specific projects. Further map IDs are assigned in all the 10 module projects to have context sensitivity. These are merged into a single project to generate the entire help file. The output for the project is html help (.chm).
Initially, we generated the html help and integrated with the application. When tested (pressed F1) the correct topic is displayed but with the ToC for that module and not the entire help.
Solution: I followed the steps mentioned in the following thread that I came across on Adobe forum.
http://forums.adobe.com/message/240496#240496
But the solution didn’t work as expected, Further investigation showed that since the output file name had underscore (Module1_EN.chm to denote the language), the solution didn’t work. Hence I removed the ‘underscore (_)’ from the output file name and generated the output again. This time the solution worked.
Please refer below the steps for generating the output.
Steps:
Generated output (chm) for all the modules. I had to make sure that the output file name does not contain any ‘underscore (_)’ as this caused the problem when generated the help file.
In the main help project (which is an empty container), merged all the projects using Robohelp’s Merged Project functionality. While merging, I first created empty Book and then merged the project within that book.
For example, Book1 will contain Module1.chm, Book2 will contain Module2.chm and so on.
Added window definitions using Project Setup -> New Window. Also added reference to main ToC here by clicking Advanced Properties. (Table of Contents: Main.hhc)
Selected the above created window while generating the output (Single source layouts -> html help Layout -> Properties).
Generated the html output for the entire project (Main.chm).
Decompile the ‘Main.chm’ and extracted the ToC file ‘Main.hhc’.
For each module project, imported ‘Main.hhc’ as a Baggage File, created window definitions same as the Main project and with reference to ‘Main.hhc’.
Again generated html output for all the modules.
Tested CSH for the project. The correct topic displayed with the entire ToC.
Best regards,
/Vikas

You need to post a bug report to get Adobe's attention. This is a user to user forum. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
Not sure but I believe it may be a bug in the Microsoft Help Compiler over which Adobe have no control. Microsoft last updated in 2004. Good luck!
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Closing one help file closes another

Hi y'all, I've searched and searched for an answer to this so
I hope someone can help.
I want to create a small floating window that acts as an
'always on top' menu with links to a full-screen help file. I want
the user to be able to close the full screen help file, leaving the
small window open. Oh, and this menu window is to be initially
called from the full-screen window by user request, but once open
it should stay open until specifically closed by the user.
I'm starting with the assumption that this requires two
separate help files - right?
Trouble is, when the user closes the full-screen help file,
the menu help file closes with it. If anyone knows how to prevent
this, I'd be very grateful.

Rick,
Same here - I try to keep in touch as much as my schedule and
my computer will let me!
South Coast,
Sorry for the delay. Being on the road so much and troubles
with my computer have made it hard to do much with the forums
lately. Here's what I would suggest for your menu system:
1) As you've observed, using the normal external topic link
mechanism in RoboHelp just results in the topic coming up in a
specified window, but since it's the same instance of WinHelp (the
same instance of winhlp32.exe), closing the topic window also
closes your menu window.
2) The trick is to invoke a second instance of winhlp32.exe.
To do that with your menu window, have your link that calls the
menu use the EP macro (yes, I know the macro reference materials
state that EP() is a deprecated macro, but it still works, and its
ability to use Windows command line switches is what you want for
the rest of the procedure).
3) Here's a sample of the menu-calling macro code:
Link Text!EP(`C:\WINDOWS\winhlp32.exe -i default_topic
menufile.hlp',)
Result: Windows instantiates a second instance of
winhlp32.exe and uses the "-i" command line switch to open
"menufile.hlp" to the default topic, or whatever topic ID you
specify. The menu appears in whatever window at whatever position
you have set in the menu project properties dialog.
4) Close the topic window. The menu should stay visible and
accessible to the user.
5) Now, in your menu, your links would have macros coded like
this:
Link Text!EP(`C:\WINDOWS\winhlp32.exe -i External_Topic_ID
externalfile.hlp',)
Result: another instance of winhlp32.exe is launched and
opens your main Help file to the topic with the specified topic ID.
6) Close the topic window and click another link in the
still-visible menu window - you should see that other topic open in
a fresh WinHelp window.
7) The only drawback that I can see is that if you don't
hard-code the path to winhlp32.exe, you get a message that Windows
can't find that file in a path that Windows apparently thinks ought
to be "C:\WINDOWS\Help\winhlp32.exe". I didn't have time to do more
testing or troubleshooting on that issue - maybe next week when I
get a chance to take a little vacation time ...
Let me know if this helps any. Good luck!

Need help loading help files in Crystal 8.5

Hi,
I have installed, reinstalled using the CD and still am unable to load or at least retrieve my help files. I can't seem to find any threads which reference the problem. I have used the wizard to install, yet can't seem to find them. Can someone help me? I can provide my phone number if possible.

Here is a sulution which worked for me :
Run "regedit"
Expand the registry key: HKey_Local_Machine | Software | Seagate Software | Crystal Reports | Help.
Expand the subkey that is named after your respective language code. For example, for English, the subkey is named 'En' and for French, the subkey is named 'Fr'.
If the registry subkey is
" C:\Program Files\Seagate Software\Crystal Reports\Help\<your language code>, then set the value for the 'Format' registry entry to "0x00000002 (2)",
else if it is
" C:\Program Files\Seagate Software\Crystal Reports\Help\<your language code>\HTML, then set the value for the 'Format' registry entry to "0x00000003 (3)".

DAQmx C Reference Help file pack?

Similar Messages

Maybe you are looking for