Dark Picture with ATV2

Hope someone can help with this.
First - very pleased with the new apple tv except for one slight annoyance.
The picture seems to be quite dark. Very noticable when watching movies.
Have adjusted TV settings to compensate, BUT that now means all my other inputs (xbox, PS3 and Sattelite TV) are now too bright!
Have searched for this and have found a solution for the apple TV gen 1 where you can go into audio video settings and change the HDMI output settings.
This option doesnt seem to be available for the Gen 2.
Surely there must be a way to do this. A remote command, a menu item that I just cant see.
Would be the first device with HDMI that I have owned where this was not an option in some menu somewhere. And I assume if it was part of the first Apple TV it must be on here somewhere.
Any help would be greatly appreciated. Thanks

I have noticed the same problem but thought it was my TV which is CRT. I connect my ATV2 to the TV using S-Video

Similar Messages

How to Recover a Dark Picture with a Heavy Color Cast

I just posted this article about how to recover a dark picture with a heavy
color cast using Lab Color mode in Photoshop. I hope it will be helpful to
others.
http://www.braintrove.com/article/58
Greg Collins
Microsoft MVP
Visit Braintrove at http://www.braintrove.com

None taken. I am unfamiliar with ACR and would love to see (compare) what it
could do with the sample PNG file in the article, and how much time it took.
The results I achieved in the article took only a few minutes to
complete--though as I mention below, it took more than a few minutes to get
to the point where I could do it in a few minutes.
I happened across a web site one day discussing the techniques in Margulis'
LAB Color book, which interested me enough to purchase it. I found the book
very enlightening and have seen incredible results using the techniques he
describes as applied to my various images. I've also ready his Professional
Photoshop book which focuses more on CMYK, and found many techniques in
there just as enlightening.
Ultimately the tools and techniques used are irrelevant if you get the
results you want... but if you find one that works faster, easier or better,
then certainly you should employ it.
I have no problem working in RGB, CMYK or LAB and find benefits from each.
The particular sample image I used in the article was one that I've spent
(too much) time cleaning up in various ways and in various color spaces (or
combinations thereof). It became my "poster child" image to work on as I
continue to build my Photoshop skills. The approach I used in the article
was the one I found most to be the fasted with the most effective results.
The original was a 6MP JPG file. I reduced it to the size in the article and
then worked on that size for the remaineder of the article. The resutls are
equivelant in the fullsize file.
Greg Collins
Microsoft MVP
Visit Braintrove at http://www.braintrove.com

Very dark picture with built-in iSight

Hi,
with my 3 month old intel iMac it seems that the picture I get with the built-in iSight is much darker than with my previous white iMac G5 with built-in iSight.
My new iMac sits in the very same place as my previous iMac G5, yet the picture quality in terms of brightness is only mediocre.
Is there a way for me to adjust the settings for my iSight?
Has anybody else noticed this? Could it be a hardware problem?
Thank you,
Torsten

Have you closed and opened Photo Booth? This is often all that is required.
This also can help:
Open the iChat application>video preview. If it is dark as well select:
iChat>change my picture>take a snap shot. Close iChat and open Photo Booth.
I haven't found the sniper solution yet, it doesn't happen very often.

Dark pictures with canon 5d mark 3 and 600ex flash, night indoors in Auto Mode and flash on.

I have purchased a new canon 5d mark 3 and speedlight 600ex-rt flash. While testing it indoor at night , the room lights are on and I was using the Auto Mode with Flash on. The pictures are Dark with the Flash on and when the flash is turned off the pictures are brighter. I am confused. How to get the AUto mode working with the Flash on.

Automatic mode, it it's attempt to be reasonably foolproof, is going to lock you out of having any control over the exposure.
The E-TTL metering system on your camera & flash are attempting to find the correct exposure for your subject.
Due to laws of physics (the inverse-square law), light has "fall off". It's not actually possible to use a single light source and expose a large room with that single light. Either the subject is nicely lit but everything else will probably be too dark. OR... the background is nicely lit but the subject is heavily over-exposed. (BTW, there are two ways to get around this.)
The amount of fall-off is based on the relative distance from the light. Every time the distance increases by a factor of 1.4 the amount of light is cut in half. This means if you have subject 10' away, but you have a foreground object only 7' away and a background object 14' away, and the flash is exposed for the subject at 10', then the foreground object will be over-exposed (with twice as much light as needed) and the background will be under-exposed (with half as much libght as needed.) Incidentally... if you "double" or "halve" the distance then the light difference will be 4x or 1/4 (depending on if you are getting closer or farther.)
Here's a video which both explains and then later demonstrates the concept in a way that makes it very obvious to see and easy to understand. If it seems confusing at first... stick with it. The video is only 12 minutes long.
In fully automatic mode the camera wont let you control anything (except how far away you stand from your subject).
If you switch to "Program" mode, it essentially works like automatic mode EXCEPT it will actually allow you to override settings or set compensations.
When you use a flash in a room with some ambient lighting (but otherwise dimly lit) there's a technique called 'dragging the shutter' (which the camera can actually do for you somewhat automatically).
To do that, set the camera to Tv mode (Tv = Time value... which is shutter priority mode). Dial in a slow-ish shutter speed... say around 1/60th of a second. Use a moderately boosted ISO (400 would probably work well... you might even go up higher).
The camera is going to evaluate the exposure needed for the room as though you don't have a flash... and it'll set the camera settings accordingly. However... since it knows you have a flash, it'll still perform the E-TTL II exposure metering and will use the flash anyway. What you end up with is a shot that has a nicely exposed primary subject (because the camera used flash) AND... a nicely exposed background which was primarily illuminated with ambient light -- but looks pretty good because the camera used an exposure that was adequate for the ambient light.
The reason I suggest using Tv mode and NOT Av mode is because you can control the mixture of flash vs. ambient light by controlling the TIME that the shutter is open. But this does NOT work if you control either the aperture or ISO.
Here's why: The flash is "momentary" but the ambient is constant. If you were to adjust the aperture settings, that will increase or decrease ALL the light sources that contribute to the exposure... so it increases (or decreases) the amount of flash AND the amount of ambient light ... and it does them in the same proportions. If you want to bright up the background lighting WITHOUT over-exposing your foreground subject, then you don't want to increase both... you only want to increase the amount of ambient light.
Since the flash is a momentary burst of light, if you leave shutter open longer you wont actually collect any more light from the flash (because the flash was providing illumination for only a tiny fraction of a second. Extending the amount of time that the shutter remains open means the camera will _only_ collect more of the ambient light... and that helps bring up the dark backgrounds.
One way to get around the flash fall-off problem is to greatly increase the distance between flash and subject. You still get "fall off" but now the distance you have to change to notice the fall off really increases. But this method usually isn't very practical because you'll be standing much farther then you'd prefer to be to get the shot.
The second way (and much more practical) is to "drag the shutter" (deliberately use longer shutter times so that the camera can collect more ambient light long after the flash is done.).
Tim Campbell
5D II, 5D III, 60Da

When i take a picture with flash in a dark place , the photo appears with a blue line . how can i default this ?

when i take a picture with flash in a dark place , the photo appears with a blue line . how can i default this ? is this normal ???

You probably have a filter set for the normal camera mode but not the square.
To fix, in Photo mode, touch the filter icon (three circles) and select None for the filter.

Whenever I take pictures in a dark place with my iphone 4 the pictures come out with a purple haze. Why would this happen?

Whenever I take pictures in a dark place with my Iphone 4, the pictures come out with a purple haze. Why does this happen?

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the camera. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

My i860 canon printer is suddenly printing color pictures with light blue and darker blue horizontal

My i860 canon printer is suddenly printing color pictures with light blue and darker blue horizontal lines. I have changed the cyan blue cartridge and the problem still exists. Does anyone know what the problem is? Thanks.

Hi CSM,
We can perform a print head cleaning and alignment on the printer to try and resolve the issue. To do this, please follow the steps below:
PRINT HEAD CLEANING
With the printer powered on, press and hold the <Resume/Cancel> button.
<1> Resume/Cancel button
When the power lamp blinks once, release the button.
Note: The power lamp will blink and print head cleaning will start. The cleaning completes when the power lamp stops blinking. (It will take about 30 seconds to a minute for the power lamp to stop blinking and remain lit solid green.)
PRINT HEAD ALIGNMENT
Confirm that the printer is powered on, and load Letter-sized white plain paper in the sheet feeder.
Note: If paper other than Letter-sized white plain paper is loaded, print head alignment cannot be performed properly.  The automatic print head alignment must be performed from the Automatic Sheet Feeder on the top of the printer. It cannot be performed from the cassette.
Press and hold the <Resume/Cancel> button, and release it when the Power lamp blinks four times. (The Power lamp will start blinking and pattern printing will start.)
Print head alignment will start automatically as the following pattern is printed.
Note:  Please wait approx. three minutes until printing is completed.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us .
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to read a picture with Transparent Background?????

i read a png file - a picture with transperent back ground - with READ PNG File and display it in my program using a Draw Flattened Pixmap function.
i get a very dark background- black coulour- in the picture created.
How can i resolve this problem???
Please give your suggestions
Many thanks in advance
RENN
Kudos always welcome for helpful posts

continue discussion here

Dark picture on projector but okay on the lap top?

I have problems with dark pictures when using Air Mac and a projector. Everything is okay on the lap top, but the pictures shown by the projector are very dark. Have anyone out there a solution for this problem.
I have talked to Apple support without getting any help.

Helge-
Most projectors by default are set for PCs, which have a different gamma output from their monitors. You can do one of two things to fix the situation: 1) Change the gamma settings on your Mac by going to the Displays preference pane in System Preferences, choose the Color button near the top, and then either pick one of the pre-calibration settings that works best for your situation, or you can manually calibrate your laptop. 2) You can change the brightness and contrast of your projector (and if possible save the settings on there). The second method is probably best if you don't need to frequently share the projector.
~Damian

HT1338 Hi I am getting a light whitish bluish mark whenever i see any darker pictures. Whats the reason for it?

Hi I am getting a light whitish bluish mark whenever i see any darker pictures. Whats the reason for it?

Actually, here's a clearer image. The middle stroke is with 20% drawing smoothness, and 100% pressure strength.
The top stroke is 100% both, and the bottom is 100% drawing smoothness with 20% pressure strength.
In all three instances, the dark watercolorish ring persists.

Dark prints with B9180 printer

I've been getting dark prints using the B9180 printer. They are all darker than what I see on the monitor. I'm using PSElements 8 and Windows XP Pro.
I've tried about every combination possible using both the PSE 8 options and the HP color options [Optimize for Printing...for Computer Screen, No Color Management, PSE Manages, Printer Manages, colorSmart/sRGB, Adobe RGB (1998), Application Managed Colors, etc], and some of these just make it worse than other combinations, especially anything with Application Managed Colors. I've read many postings on various web sites and they all seem to deal with Photoshop users, not Elements. Can it be as simple as my new HP S2331 23 inch monitor is out of calibration, after about 1 month's use?
I would really appreciate some suggestions and help.
Thanks in advance.

As to my printer drivers, after installing Snow Leopard, I was unable to print using LR2.5. The print would fail generating an error. I then installed the new drivers from the Epson web site: epson13113.dmg for my Epson R2400. This "worked" in that it did not generate an error, but would just transmit to printer and then quit.
Up to that point I had done a minimum of web reading, I just had seen that Matt K. from Kelby and others had been using SN and LR2 successfully. With my two failures, I googled extensively. I deleted all my printers, downloaded the new 10/22 Apple Epson drivers, re-ran the Epson drivers, etc, etc, etc, stopping and restarting along the way until I was able to obtain CS4 prints using SL with my Epson R2400.
At that point, I returned to my initial objective, which was to obtain (re-obtain, if you will as I previously had them) quality prints from LR. The early prints were harsh and less than acceptable, and when I got the "Sun in the dark" picture that I could quantify, I knew I had a definite issue and posted to this forum.
(I am assuming that my deletion of the profiles while seeking to update driver is how I generated my initial inconsistency that was part of my original post).
I now looks like I had a color space problem. I have deleted and re-generated the psd "Edit in Photoshop" image. Again, on the screen, the edit and the original appear identical and as the CS4 print is correct, I am left, it appears to me, with a LR2.5 printing issue unless I can find some configuration issue. The two pictures are definitely different with the flesh tone pink and some of the background colors "lighter" in the LR2 print.
(As a side, I don't think this would matter, the original pics were taken as raw nef from a D700 camera using a 105mm VR2 macro lens).
Thanks for your time.

New 1080 apple tv .. Dark picture. Rgb PC levels only

The new apple tv isn't allowing me to change the HDMI video level (hdmi high / low in the settings menu)
Pretty sure it's only outputting PC levels.. which is creating a dark picture.
Tv settings are calibrated to HDMI Video levels as they should be.
Bluray and Roku box are displaying properly, but new Apple tv 2 is not.
Tried different resolutions.
-Panasonic Plasma through Hdmi/dvi cable .

I have the Apple TV 1080p with a panasonic plasma - G10 series. I have 4 choices of HDMI output - Auto, YBrCr (or something like that), RGB high and RGB low. I could barely tell the difference when I selected each of these. I thought the color and brightness were off a bit so I ended up toning down the brightness and contrast on the TV and choosing a cool color setting. The THX setting on the TV made the picture from the Apple TV pretty dim. I've left the Apple TV HDMI output as Auto.

Ios8 problem. ibooks individually open up ok black print on white, but the "page" shows as dark charcoal with indistinct pale lettering and I can't read it. Nowhere to fix the "page". It's crap. Please help

ios8 problem. ibooks individually open up ok black print on white, but the "page" shows as dark charcoal with indistinct pale lettering and I can't read it. My home page picture appears to "bleed" through. Nowhere to fix the "page". It's crap. Please help

I'd still prefer to keep separate user accounts. I never had any issues like this before. The only time I started having a problem was when I was just trying to force empty the trash a few months ago. I came on here looking for a solution and someone posted a way to empty the trash using the terminal. Before then, I hadn't used the terminal for anything--it was just another app in my utilities folder. (None of this has anything to do with having separate user accounts. Plenty of people with kids make second and third user accounts on their laptops so that multiple people can use one laptop, having more than one user on a laptop is not very difficult.) But thank you, I'll try that out and see if it works!

HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?

my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Dark Picture with ATV2

Similar Messages

Maybe you are looking for