"Das Programm ist nicht Ausführbar, zur Behebung des Fehlers ist LabVIEW full Development notwendig"

Hallo,
ich habe ein AppBuilder-Problem: Ich habe die EXE-Datei eines VIs auf der Entwicklungsumgebung erzeugt. Die EXE-Datei lauft problemlos in der Entwicklungsumgebung, aber nicht fehlerfrei auf neuem Rechner. Folgende Fehler ist gemeldet
(siehe Attachments) :
"Das Programm ist nicht Ausführbar, zur Behebung des Fehlers ist LabVIEW full Development notwendig"
PS:    # LabvieW (LV2009_f5RTEPatch) 
           # Ich verwende zusätzliche dlls.
Bitte um mögliche Lösungen.
Danke, Didier

Hallo Didier,
dies ist ein englischsprachiges Forum und du würdest unter Verwendung des Englischen mehr Antworten erhalten. Ansonsten gibt es auch das deutschsprachige www.labviewforum.de …
Did you create an installer to correctly install the EXE on the 2nd computer?
Did you include all needed items (like those DLLs) in the installation?
 

Similar Messages

  • Hallo ich möchte mir  Photoshop CS6 EXTENDED für Schüler kaufen. Bin in einer Umschulung freigabe von Adobe wäre genehmigt. Das Programm ist ja dann für immer und nicht nur für die Schulzeit oder ?

    Hallo ich möchte mir  Photoshop CS6 EXTENDED für Schüler kaufen. Bin in einer Umschulung freigabe von Adobe wäre genehmigt. Das Programm ist ja dann für immer und nicht nur für die Schulzeit oder ?

    Ja, klar.
    Mylenium

  • Ich kann das Programm CS3 nicht auf den Neuen Rechner freischalten. Der alter Rechner ist defekt

    Ich das Programm CS3 nicht auf meinen neuen Rechner freischalten. Der alte Rechner ist defekt

    Hallo bluewin.ch,
    Adobe schreibt zu diesen Problemen folgendes:
    "Haben Sie keinen Zugriff auf Ihren vorherigen Computer? Haben Sie vor der Deaktivierung die Hardware aktualisiert, eine Festplatte oder das Betriebssystem aktualisiert oder den Computer formatiert? Fragen Sie den Adobe-Support, Ihnen bei der Deaktivierung auf einem Computer, auf den Sie keinen Zugriff haben, behilflich zu sein.
    Halten Sie Ihre Seriennummer oder Adobe-ID bereit und kontaktieren Sie uns dann."
    Das kannst Du dann über einen Webachat mit dem Support machen, diesen findest Du auf der Seite die manfredv87993208 verlinkt hat.

  • Error While build: Ein nicht ausführbares VI kann nicht ohne das dazugehörige Blockdiagramm gespeichert werden

    Hello,
    There is an error while build EXE:
    "Ein nicht ausführbares VI kann nicht ohne das dazugehörige Blockdiagramm gespeichert werden"
    (in english like: a non-executable vi can not be saved without the corresponding block diagram)
    the full message:
    Beim Speichern folgender Datei trat ein Fehler auf:
    C:\dev\...\xxx.vi
    Informationen zum Lösen dieses Problems finden Sie auf der Seite ni.com/ask für Supportanfragen. Verwenden Sie folgende Informationen als Referenz:
    Fehler 1502 bei AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclassave.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
    Mögliche Ursachen:
    LabVIEW:  Ein nicht ausführbares VI kann nicht ohne das dazugehörige Blockdiagramm gespeichert werden.
    What is the problem? Should I remove checkbox to remove block diagram code?
    Thanks
    Eugen Wiebe
    Bernstein AG
    CLAD - Certified LabView Associate Developer

    The exact wording of the error 1502 is:
    "LabVIEW:  Cannot save a bad VI without its block diagram."
    Let me guess:
    You have now a build script with "Enable Debugging" disabled. If you enable this option, building the EXE is possible, but the EXE will most likely not run. Correct?
    It seems to me, that you either have a faulty LV installation or some of your VIs are corrupt. This is something which can happen randomly when upgrading projects from older LV versions. Masscompile/Force compile of the affected VIs CAN help, but it is no promise.
    Please try to break down the issue to a set of VIs (maybe a 3rd party instrument driver?).
    thanks,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Fehlermeldung/Error Message: Das Programm kann nicht gestartet werden, ...

    Beim Klicken auf .jpg und .dmg Dateien erscheint neuerdings die Fehlermeldung
    'Das Programm kann nicht gestartet werden, da das System nicht kompatibel ist.'
    Was bedeutet das?
    Ich habe einen Software-Fehler vermutet und versucht, das Proramm SoftwareRestore.pkg von der CD zu benutzen, allerdings startet das Programm nicht (beim Doppelklicken erscheint der aufgehende Rahmen; es passiert aber nichts).
    Gute Ratschläge?
    Herzlichen Dank im Voraus
    Elmar Schrohe
    English Version: When trying to open files with extensions like .jpg or .dmg I get the error message:
    Das Programm kann nicht gestartet werden, da das System nicht kompatibel ist.
    (My translation: Program can not be started as the system is not compatible).
    What does that mean?
    I suspected a software problem and tried to use the SoftwareResore.pkg from the CD, but that does not start (although it pretends).
    Good advice?
    Many thanks in advance
    Elmar Schrohe

    Thanks, Tom!
    This got me one step ahead (worked fine on .jpg-file), but the basic problems remain.
    (1) When I drag the .dmg files to StuffIt, it gives the error message
    "An error has occured attempting to mount a disk image "1015"
    Error #1015"
    I looked that up in a forum where it said I should repair permissions. I did that, but it did not help; I keep getting the message.
    (2) Trying to start AppleWorks I also get an error message
    Das Programm konnte nicht gestartet
    werden, weil ein Fehler in einer
    Gemeinschaftsbibliothek aufgetreten ist "-
    <AppleWorks><MW_MSL.PPC.Shlb><InterfaceLib><
    <div class="jive-quote">"
    My translation: The program could not be started because an error occured in a shared library "-<AppleWorks><MW_MSL.PPC.Shlb><InterfaceLib>"
    (3) That's why I thought I might use the SoftwareRestore.pkg which, however, does not seem to open. Is there a way of starting it anyway?
    Elmar

  • Ich finde das Programm isync nicht auf meinem Rechner

    ich habe ein neues Telefon und möchte es Synchronisieren.
    Ich kann aber das Programm isync nicht in meinen Programmen finden.
    Wie kann ich das jetzt installieren?

    Hier gibt ein Lösung.  Ob du verstandich Englisch, das Link ist: http://slashusr.wordpress.com/2011/07/22/the-missing-isync-in-os-x-lion-and-what -to-do-about-it/

  • Error while opening LabView files - Bei der Weitergabe des Befehls an das Programm ist ein Fehler aufgetrete​n

    Hy Forum
    Some times ago i had some troubles while opening files in labiew....
    I want to open a LabView file (no matter if *.vi or *.lvproj file) from a network path (mapped network drive). The Windows User Account Control (Windows 7, 32bit) appears to asking me for giving access to my system settings! Oops, never seen this before, pressing yes button....
    Ok, but after this the following error message appears: 
    I don't know what the correct message in english is
    "An error occurred while executing this command"????
    "Bei Weitergabe des Befehls an das Programm ist ein Fehler aufgetreten"
    The LabView Getting Startet windows will be opened, but not the desired vi or project. Even if i try to open a project from the getting startet window or from the windows explorer, just the UAC window and the same error message.
    Easy as it is, just remove the "run as administrator" options on the compatibility settings of Labview and it will run without UAC confirm.
    And also files on network drives will be opened.
    Hope this would be helpful..

    Hi Dominik,
    thanks for posting your experience here. This may help someone down the line.
    LabVIEW should indeed not normally be run as admin as it works fine in Win7 when run as a standard user.
    Regards,
    Joseph Tagg

  • Das Programm kann nicht gefunden werden / Program not found

    I'm having a Problem with almost all Programms on an Macbook Pro.
    After the Update to Maverics, I'm now getting errors when double clicking files.
    When starting the Programm from the Programms folder, this works.. But opening files, does not.
    Any Ideas what could be the Problem?

    Update MS Office fixed my Problem. 
    OS: 10.9.2
    Error Msg: Das Programm kann nicht geöffnet werden
    Program: Microsoft Excel

  • Photoshop elements 13. ich kann meine seriennummer nicht überprüfen, da meine internetverbindung nicht anerkannt wird.ich habe internetzugriff, kann meine nummer aber nicht prüfen.das programm ist installiert

    wie kann ich meine seriennummer nun prüfen?!

    die seriennummer soll geprüft werden.habe die noch nirgendswo eingegeben.habe nur 7 tage nach Installation dafür zeit.habe Windows 8 und Internetverbindung.sobald ich photoshop elements 13 öffne,will das Programm die nummer prüfen.dies wird aber abgebrochen,da ja angeblich keine Internetverbindung besteht.

  • Das Programm ist toll, der Umgang mit den Kunden ist scheiße, ich könnte kotzen

    Das Programm droht, sich abzuschalten, wenn ich nicht unverzüglich eine alte Installation deaktiviere. Natrürlich ist der alte Computer längst auf dem Schrott, ich kann also nichts deaktivieren. Seit einer Stunde suche ich auf den Internetseiten nach Hilfe, aber ich drehe mich ständig nur im Kreis. Unmengen von englischen Seiten, auf denen man sich irgendetwas selbst raussuchen soll. Ich verstehe davon überhaupt nichts. Niemand, dem man eine Frage stellen kann. Erst muss ich mir einen Account zulegen, e-mail Adressen und Passwörter eingeben, Bestätigungs-e-mails ansehen und jetzt bin ich hier und habe immer noch Niemanden, der mir hilft. Ich könnte kotzen.
    Die Adobes dieser Welt zocken einen nur ab und lachen über die armen Kunden, die für so ein Programm viel Geld ausgegeben haben.

    Nach ca. 30-40 versuche, seit 15.08.14 habe ich auch Norton ausgeschaltet. Es ging nichts.
    Erst als ich ohne Test Version Adobe Premiere Elements 12.0 installiert hatte, dann ist es gegangen.
    Leider, so etwas habe ich seit letzte 15. Jahre nicht erlebt.

  • Warum kann ich mit einemal eine, in Lightroom bearbeitete, dann nach Photoshop als JEPG  exportierte, dort weiterbearbeitete und dann als JEPG zu speichernde Datei nicht speichern? Beim Versuch sagt mir das Programm:speichern nicht möglich da ein Programm

    kann mir jemand helfen?

    Hallo
    da war wohl mein text zu lang.
    Photoshop sagt mir : Speichern nicht möglich weil ein Programmfehler aufgetreten ist.
    Allerdings speichert es PSD Dateien. Und das ganze erst seit ich ein Update im Lihgtroom gemacht habe.

  • Hallo, ich kann das neue Update nich laden da immer folgende Fehlermeldung kommt: Programm kann nicht gestartet werden da MSVCR80.dll fehlt.....was ist zu tun??

    Hallo, ich kann das neue Update nich laden da immer folgende Fehlermeldung kommt: Programm kann nicht gestartet werden da MSVCR80.dll fehlt.....was ist zu tun??

    HT1923: iTunes und andere Softwarekomponenten für Windows Vista, Windows 7 oder Windows 8 entfernen und neu installieren
    tt2

  • Beim zurücksetzen meines iPhone 5s ist das iPhone hängen geblieben und im iTunes kann ich das iPhone auch nicht sehen wenn ich es verbinde. Danke schon im Voraus

    Beim zurücksetzen meines iPhone 5s ist das iPhone hängen geblieben und im iTunes kann ich das iPhone auch nicht sehen wenn ich es verbinde. Danke schon im Voraus

    and it sounds like it also fails to restore when you connect to a different computer and another instance of iTunes......and that you have tested all of the cables and USB connections and anti virus software and that you have admin privileges on your computer......had you had any connectivity or other issues prior to trying the restoration?  Also, did you put it in DFU recovery mode or just click on restore from iTunes? 

  • InDesign CS6: Die Installation ist abgeschlossen, aber das Programm lässt sich nicht starten? Muss ich die Installation wiederholen?

    Die Testversion In Design CS6 wurde soeben installiert, aber die Aktivierung ist nicht möglich. Muss ich den gesamten Vorgang wiederholen?

    Lässt sich das Programm nicht Starten oder nicht aktivieren?

  • Fehlermeldung : Das Programm wird aufgrund eines Problems nicht richtig ausgeführt . Das Programm wird geschlossen und Sie werden benachrichtigt , wenn eine Lösung verfügbar ist .       Was kann ich jetzt tun ?

    Fehlermeldung : Das Programm wird aufgrund eines Problems nicht richtig ausgeführt . Das Programm wird geschlossen und Sie werden benachrichtigt , wenn eine Lösung verfügbar ist .  
    Was kann ich jetzt tun ?

    Unfortunately, I don't think that anyone on this forum can help[ you with a SONY product. Have you contacted SONY customer support?

Maybe you are looking for

  • Sale Based Rent- You are not allowed to change sales-based rents

    Hi everybody, While processing a sale based rent using T-code : RESRSE, I got the problem as below: At the Log Display Screen: Step Processing of Sales-Based Rents performed on 19.12.2011 at 17:00:02 Status of step: You are not allowed to change sale

  • 'CrystalReportViewer' is ambiguous in the namespace 'CrystalDecisions.Web'

    I had to close my previous thread about this subject.  I think I screwed something up with my last post.  I tried to post code from my .aspx and now I can only see 4 of the 10 replies. I have updated from CR 10 to CR 2008 SP3. I only have on crystalr

  • Check not printing street address

    When printing checks through F110, if a vendor has a PO box and street, only the PO box prints.  If no PO box is present, then the street will print.  How can we get both to print when present? thanks

  • EMBEDDING FLV PLAYER ?

    I'm trying to place a flv player into my flash page which then is going to be exported as an swf and used as a page in a 'flip - page' style magazine. I bought the flip page component but when the swf page with the flv player is used as a page, the p

  • Idoc outbound door setting

    I have to transport a new interface that is running in Dev and QA to PROD. Basis guys do this in CMS, but I have to tell them what do they have to import. With the interfases, I dont get any problem, but the idoc that the interface is using, isnt in