Dash Board Prompt and it's dashboard should be display at same page.

Dear guys ,
am newbie to obiee .am using obiee 10.1.3.am develping dashboard with prompt but a little problem is here when i run dashboard
prompt are displayed ,i give values to them as i press go button prompt page hide and my dashboard page is displayed.i want prompt should be view in upper section and dashboard under it not at second screen.so in this way i use back option and then change value of prompt and then go for dashboard result.
regards
shakeel khan

Prompt in Answers in very rarely used or almost never used..
You can create the Dashboard Prompt for the column you required.
and in your Answers report, apply, 'is prompted' filter on that column.
In the dashboard, add the dashboard prompt and Answers request..
Regards,
Raghu

Similar Messages

  • Error while running script HyperV - Dash Board - VM and Storage Report

    Hi Team,
    I am getting below error while running HyperV dashoboard monitor & storage report script from Technet script library.
    HyperV - Dash Board - VM and Storage Report
    Finished processing VM  - xxxx
    Processing VM - xxxxx
    Get-VHD : Unable to cast COM object of type 'System.__ComObject' to interface type 'System.Management.IWbemServices'.
    This operation failed because the QueryInterface call on the COM component for the interface with IID
    '{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object does not exist.
    (Exception from HRESULT: 0x80010114).
    At C:\Scripts\HyperV-DashBoard-v2.1.ps1:210 char:10
    +                     If (Get-VHD -VMID $vmDetails.VMID -ComputerName $cNodes.Name[$i])
    +                         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Get-VHD], InvalidCastException
        + FullyQualifiedErrorId : Unspecified,Microsoft.Vhd.PowerShell.GetVhdCommand
    Get-VMNetworkAdapter : Unable to cast COM object of type 'System.__ComObject' to interface type
    'System.Management.IWbemServices'. This operation failed because the QueryInterface call on the COM component for the
    interface with IID '{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object
    does not exist. (Exception from HRESULT: 0x80010114).
    At C:\Scripts\HyperV-DashBoard-v2.1.ps1:238 char:12
    +                      If ((Get-VMNetworkAdapter -VMName $vmDetails.Name -ComputerName $cNodes.Na ...
    +                           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Get-VMNetworkAdapter], InvalidCastException
        + FullyQualifiedErrorId : Unspecified,Microsoft.HyperV.PowerShell.Commands.GetVMNetworkAdapterCommand

    Hi ,
    I found that the problem had been solved in the script blog by your self :
    http://gallery.technet.microsoft.com/scriptcenter/HyperV-Dash-Board-VM-Disk-299bac7d/view/Discussions#content
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to open and navigate between human task forms in a same page?

    Hi
    I use Oracle BPM 11.1.1.5
    I have a question about taskflows in BPM Application.
    In ADF web application, I create a sipmle task flow and insert view id and bind these to jspx pages, my pages are opend in same page when
    return an outcome.
    For exapmle I have three pages like A,B,C.
    In task flow, insert three view ids and bind to A,B,C.
    My first pages is A, and when outcome is B navigate to B, when my outcome is C then navigate to C in a same page not separate pages.
    But my problem is here.. in BPM Application when create task forms, every task has a separate task flow that there exist a single view id and a wild card flow in it.
    In BPM workspace when initiate human task form is closed, I should press refresh button to see next human task form in task list table.
    I tried to create a simple task flow and insert human task forms in it and navigate between these.. but show human task form in wrong display and don`t show some component and human task payload.
    Now, my question : How to open and navigate between human task forms in a same page like software installation?

    Having a separate Data Control for each human task is normally the case. There is a way to assign multiple human tasks to a single data control (and one task flow), but I don't think that this is going to help you with what I think you're trying to do.
    If your human task is called "EmployeeDetail", then you'd use the data control associated with this for the UI pages in the task flow diagram that is associated with this human task. For example, you might have a first page that has just the basic employee information - the fields (at least the ID field) would come from the EmployeeDetail data control. When the end user clicks "Next", you might have this UI page flow to a second UI page in the task flow diagram that has the employee's address information. You might place the address fields from the EmployeeDetail data control onto this second UI page.
    You might be asking how the work item instance can automatically flow to the next interactive activity in the process while staying inside the first interactive activity's human task's task flow diagram. This is not how it works - the task flow diagram models the end user interaction while inside a single human task that is tied to a specific interactive activity in the process. If you want a the end user to be able to move the instance through multiple interactive activities in the process in one interaction, look at "Activity Guides". Activity Guides do a nice job of this.
    Dan

  • MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.

    MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?

    Go step by step and test.
    1. Power off the router. Unplug it from the wall. Wait a while.
        Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
        Restart the computer.
        Start up in Safe Mode.
        http://support.apple.com/kb/PH14204
    2. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    3. Deselect Proxies if selected.
        System Preference > Network > Advanced  > Proxies Tab
        Under "Select Protocol", uncheck any box if selected.
        Click "OK" then  "Apply”.

  • Hi I am new to Apple devices, i got a new Ipad mini and i am trying to download skype from the Istore,it asks me to review my account and if i give all the details and click on next, it come to the same page,please help

    Hi I am new to Apple devices, i got a new Ipad mini and i am trying to download skype from the Istore,it asks me to review my account and if i give all the details and click on next, it come to the same page,please help

    Oh thank you very much, i was worried after a whole day's hard work but most important that i had lost my photos, i don't understan the photo,shared and albums? I have a lot of photos in my albums that it didn't let me delete, yet i could delete a lot of others, could you explain this to me please

  • Same set of data should print twice on same page in SAP SCRIPT

    Hi Experts,
    I come across a requirement where I need same set of data in sap script should print twice as it is on same page.
    and if first page overflow, then same scenario should continue till complete data is printed. Basically main window data should print twice in two blocks on same page.
    E.g.
    If I have 10 line item which is to be printed on top window on  first page. Now I want that same 10 lines should be printed in a block below the first block. Data should flow similarly across multiple pages.
    Hope my question is pretty clear. I am expecting suitable answers from experts.
    Thanks in advance.
    Regards,
    Vijay

    Hi
    I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
    If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more. 
    Best regards
    JD

  • Times and Times New Roman Do not display the same with ADE pdf reader

    Anyone an idea why?
    (These fonts display the same with MS word and Adobe Acrobate reader)

    That looks like a grunged version of Times New Roman. You probably have this font installed, and it's likely conflicting with the standard Times New Roman font.

  • Dash Board Prompts

    Hi everyone,
    I have created a dashboard prompt with the following.
    1.) Code
    2.) ID.
    Use needs to select the code and ID for to which are used as filters of requests used in the dashboard.
    "Code" --- This is varchar which is having a control as drop down list, the values of which are populated from SQL Results. In the SQL i am using a session variable which is set as soon as user logs in.
    "ID" -- This is a number which is having a control as drop down list, the values are using "Constrain" --- based on the code from drop down.
    The issues is when a user logs in for whom the "Code" values from SQL is null, the ID is showing all values, but according to the requirement nothing should be shown and user should not be allowed to proceed.
    How can this is achieved.

    Kumar,
    What do you mean exactly by "multiple analysis" ?
    Also elaborate what exactly you mean by "bring Dashboard prompt on to excel" ?
    1. are you trying to get only the selections made through the prompt into excel?
    2. are you trying to get the prompt (form) into excel?
    A workaround for point 1 above is feasible through narrative view, presentation variables,...
    -bifacts :-)
    http://www.obinotes.com

  • Sorting Dash board prompt

    Hi all
    I have a month Prompt its Char Ex. values are '1','2','3','4','5',...'12' now in dashboard its showing as 1,10,11,12,2,3,4...9
    I want to sort it and show 'January' instead of '1' and 'Feb' instead of '2' so on........
    AND even i show 'January' in the drop down of my Prompt i need to pass filter value to my "isprompted" field as '01' which was the actual value ..
    any ideas friends
    any help is appreciated.
    Thanks
    SangO

    Hi There
    For sorting use the technique described in the earlier reply. Regarding choosing January and passing 1 is not possible, as in OBIEE the drop down don't work on code and value concept, whatever you see is what gets passed onto the prompt. The ideas is to have fact join with dimension using key column, that should improvise the performance.
    Hope this helps
    Sunil S Ranka
    Blog :: http://sranka.wordpress.com
    "Superior BI is the antidote to Business Failure"

  • Dash board prompt

    i create one dashboard with 10
    pages in that i provide 1
    dashboardromt
    and 9page prompts
    now my ? is dashboard prompt reflect
    only on 10 page or all?

    So when you specify a dashboard prompt as scope-> ‘page’, what this does is say that any selections made for this prompt will not be used to set other prompts within the dashboard. When you specify a dashboard prompt’s scope-> ‘dashboard’, this says that any selection of this prompt will be reflected in other prompts within the dashboard. I think people get it confused and think that the ‘page’ scope shields the prompt from receiving selections from other ‘dashboard’ scope prompts; but, it does not. The scope is only there to specify if the selection within the prompt will be local (page) or global (dashboard).

  • Dash Board Prompt - Date

    Hello All,
    I has a requirement on dates for the OBIEE Dashboard. I have a date parameter.... when the user selects a date... i need to get all the records that were between the date passed and 15 days past to that date
    For Ex: If the user selects 15-01-2010 i need to get all the dates from 01-01-2010 to 15-01-2010
    how can i do this..
    Please let me know thanx.
    Kiran

    hi kiran,
    Add a date column to your report,and convert that one to sql by cocking on
    Filter--Advanced-->convert this filter to sql
    and in sql use the following syntax
    Periods.Week(date column) between TimeStampAdd(SQL_TSI_DAY, -15, CURRENT_DATE) and CURRENT_DATE
    thanks,
    saichand.v

  • Removing Items from Gridview and refreshing the gridview without redirecting to the same Page.(Windows Phone 8.1 Xaml)

    I have a gridview with a Usercontrol as its itemtemplate. In the Usercontrol I have a flyout attached to it using which the user can choose to delete the entry. After deletion how do I remove the entry from the gridview without redirecting to the samePage
    and removing the backstack entry?
    Please note that I am deleting/modifying the itemssource in the usercontrol's codebehind.

    Hi Rajiv,
    Where you have attached flyout. Which UI control. Is it border?? What type of UI control inside the DataTemplate?
    As normal, when user clicked on the delete item, you can retrieve the selected entry as single item of an observablecollection and pass into your ViewModel class and remove it. 
    The item will be removed at Runtime without refreshing or redirecting and there will a animation (transition) in the GridView when it removing.
    If this content doesn't match your answer. Please ask me again.
    Thank you

  • Require LOV's should be displayed on single page for Webi Rich Client -R3.0

    Hi all,
    Is there any way to display the list of values in a single page when we apply a quick report level filter in Web intelligence Rich client report.
    Behavior:
    When we have large list of values for an object then the list of values are displayed in pages......
    We can avoid the pages in Webi by making changes to the 'List of value batch size' from 1000 to 10000.
    Is there any setting for displaying  the list of values for Web Intelligence rich client ?
    Please advise....

    Hi,
    I  have checked the view source code. It is having correct details
    for eg..
    SAP Integrated ITS, WebAS: C11, workprocess: 0
    All rights reserved.
    Creation time:  Thu Dec 03 11:10:16 2009
    Charset:        utf-8
    Template:       bbpstart/99/bbpglobal_800.html  -->
      <!-- No session management -->
    I  published the Template again for BBPGLOBAL.
    Only page cannot be displayed is coming.
    There is some link missing between the SRM server and the ITS.
    Can you figure out what it is ? We are stuck
    Regards
    G.Ganesh Kumar

  • Hello, I'm having trouble twit firefox. When I open it my home page opens for a second then disappears and fire fox keeps trying to load the same page.

    This problem started last night, I have uninstalled firefox and re installed it, but the same problem persists.

    hello davidbutterly, it sounds like a theme or extension might be interfering here. please try launching firefox in safe mode once and see if the issue is occurring there too. in case it's working correctly, please go to firefox > addons > extensions and disable/remove any extension that look suspicious/you didn't install intentionally or that might interfere with the tab loading behaviour.
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • I use to have a secure email website (lock in the corner) with the Firefox there's none?? I switched to explorer and it has when I bring up the same page

    When I use Explorer to bring up my webpage (westnet.com.au) to access my emails it has a padlock in the corner indicating a secure site. I noticed with Firefox there is no padlock indicating know security with my email log in details

    The padlock icon has been replaced in Firefox because the developers found that it was misleading -- if you check for the padlock, it tells you that the connection is secure from eavesdropping, but it doesn't tell you whether you are connected to the correct site or to an imposter.
    The replacement is the "site identity" button. You can learn more about it here: '''[[Site Identity Button]]'''

Maybe you are looking for