Dash board report for make to stock scenario?

hi friends,
Here i am having a problem that, I need to do the dash board report to display the sales and production values (quanty s , value) with particular date comparission.
some more detailed.
my client need the report with day wise production and sales values with respective of material number. I can make the report if it is make to order situation. but , this is make to stock situation. and also mentioned that values should match the G\L Account ,ref: fs10n Transaction.
plz help out ......
rewards in advance.
Regards,
Naveen M

The definition of Organization structure might not allow you to do so
Please go throught the following link in detail http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Summary from the above link is as mentioned below
You can plan material requirements at plant level or for different MRP areas. With MRP at plant level, the system adds together stocks from all of the individual storage locations, with the exception of individual customer stock, to determine total plant stock. The requirements are combined in the planning run and procurement elements are created for these pegged requirements with unknown sources. Individual storage locations can be planned separately or be excluded from planning.
In the case of material requirements planning on an MRP area level, only the stocks from the storage locations or subcontractor assigned to the respective MRP area are taken into account. Only the requirements in this MRP area are combined and procurement elements are created for them. This enables you to plan material requirements specifically for certain areas.

Similar Messages

The reporting point backflush is not possible for make-to-stock repetitive

Hi All,
we are using the assembly backflush in the MTS REM process. we are need to do the reporting point backflush
if we tick against the RP backflush. what will be the effect in the process while confirmation.
i read the sap library . it say like
The reporting point backflush is not possible for make-to-stock repetitive manufacturing.
is it correct.
Thanks
VRaj

Hi mangal,
i did all the setting as you said. but when click on the reporting point.
system thru error
Error reading reporting point information
Message no. RM111
Diagnosis
The repetitive manufacturing profile is set for the reporting point procedure. However, either no reporting points exist for the material or they are incorrect. Two common reasons for this are:
The repetitive manufacturing profile has been changed in the current session.
You have not defined any milestone operations in the routing.
When creating the product cost collector, no reporting points were created.
Procedure
Two alternative solutions are possible:
Assign a repetitive manufacturing profile with no reporting point procedure to the material in the material master record.
Recreate the reporting points by recosting the product cost collector. To do this, the following prerequisites must be met:
In the material master record, in the production version, you must enter a routing under either detailed planning (first priority) or under rate-based planning (second priority).
Milestone operations must exist in this routing. The system ususally automatically creates the reporting points from these milestones when creating a product cost collector or when creating a production version.
how to create the REPORTING POINT

Explanation on use of Strategies for Make to Order/ Make to stock scenario

Hi Gurus,
I have a scenario. In the BOM, the final Finished Product was to be made for make to order. There are two semi finished material below that. One I want to use it for make to stock and another for make to order. There is one more raw material at the bottom level which I want for make to stock. So I want to know what are the strategies I can use in the material master at all the levels for this scenario. Can anyone explain how can I do it in SAP?
Regards,
Brijesh

Dear Brijesh,
This indicator will determine the component how it should get produced either individually or collectively
Example
Fert 1 - strategy 20, requirement for this fert Via sales order is 10
Fert 2 - strategy 40 requirement for this fert Via sales order/demand management is 10
ROH is used in both Ferts and mainatined in BOM and also set to indicator 2 ( Colletive ) in MMR
ROH requiement for fert 1 -1 ( BOM )
ROH requiement for fert 2 -1 ( BOM )
after MRP system will create only 1 PR for total qty 20
If ROH is set to 1 ( individually ) then
after MRP system will create 2 PR's as 10 each
Hope it answers your query
Regards
Madhu

Crystal Report and Dash Board Report templates

Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
Aditya

Hi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM

Make to order and make to stock scenarios in prodcut costing

Dear Co Experts,
I am new to product costing, in product costing there are two way to estimate the cost of the product by using make to stock and make to order.
Kindly tell me the scenario of make to order and make to stock
In make to order scenario what are the minimum configuration steps are required in controlling, PP, MM, and SD.
In make to stock scenario what are the minimum configuration steps are required in controlling, PP, MM, and SD.
How we will defend the costing variant in make to order scenario
I really appreciate for your early response
pls tell me end to end cycle for both the scenarios
Warm Regards
Venkataswamy

Hi
In Cost Planning in Product Costing,We configure Cost variant
Costing variant is a A tool that contains all control parameters for costing, including
parameters that control how cost estimates are executed and the material
prices or activity prices that are used to valuate the costing items.
In Cost Object Controlling category a)by order b)by period c) sale order
a) BY Order,We create Co Production Order which will be used in Make To Order Production.
b) By Period,We create Product Cost Collector which will be used in Make To Stock or Repetitive Manufacturing
c) By Sale Order,We create sale order with linked to Co production order,We can use Make To Order Scenario.
Re: Repitative manufacturing
www.sap-topjobs.com/SpecialPP/samplepc.doc -
Regards
Edited by: Dublin on Oct 19, 2009 10:02 AM

Make to order and make to stock scenarios

hi .
plz can any one help wt is make to orders scenario and make to stock scenario.
thanq

Hi
In Cost Planning in Product Costing,We configure Cost variant
Costing variant is a A tool that contains all control parameters for costing, including
parameters that control how cost estimates are executed and the material
prices or activity prices that are used to valuate the costing items.
In Cost Object Controlling category a)by order b)by period c) sale order
a) BY Order,We create Co Production Order which will be used in Make To Order Production.
b) By Period,We create Product Cost Collector which will be used in Make To Stock or Repetitive Manufacturing
c) By Sale Order,We create sale order with linked to Co production order,We can use Make To Order Scenario.
Re: Repitative manufacturing
www.sap-topjobs.com/SpecialPP/samplepc.doc -
Regards
Edited by: Dublin on Oct 19, 2009 10:02 AM

How to link the Sales Order to Planned Order in Make-to-Stock scenario

Dear All,
My scenario is Make-to-Stock. Now client wants to know exactly what are the process orders created for Sales order. Please let me know where I will get the link between Sales orders and Process orders in Make-to-Stock scenario.
Regards
Naveen

You will require to work on the requirement type settings for MTS Scenario. The transaction code is OVZH. The requirement type for MTS is KSL.There are various rules for determining the requirement category.
The requirement type can be determined based on the strategy group in the material master / You can also use the item category and MRP type to determine the requirement.
Regards,
Ashok Chauhan

Creation of dash board report

how to create dash board report
Please be more specifc and if your question is for creating dashboards - search the forums before posting
Edited by: Arun Varadarajan on Apr 19, 2011 9:12 PM

If you require help in Reports, please put it in the Reports
If you want to do the same in SQL, refer the analytic function, particularly SUM

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

Availability check for Make to stock and Make to Order

Dear All,
Client is selling Make to stock and make to Order material.
How and what settings need to do for Avaialbility check.or we can use standard one.
I hope in case of Make to Order availability check may not happen.
Please correct me.
Thanks in advance.
Regards,
Shrikant

hi,
yes for make to order we dont have AvChk. for make to stock items u need to follow the
below configuration.
Availability check
1. Availability check is an integral part of the business process that determines if the required delivery quantity can be met on a required delivery date. For this purpose the system takes into account pre-delivery activities such as scheduling for picking or packing times and the time taken to produce or obtain the material. It also performs several background functions such as Backorder processing, rescheduling and ATP quantities.
2. Backorder processing: processing of a sales order that has not been fully confirmed or not confirmed at a certain delivery date.
3. Rescheduling: is a proposal of how u2013 confirmed quantities already assigned to a sales order can be reassigned to other sales orders that have a higher priority.
4. Available to promise (ATP): is a process of checking the available quantities of a material. The ATP quantity consists of warehouse stock + planned receipts (incoming stock) u2013 planned issues (outgoing stock). to examine stock on hand (CO09) proceed to logistics u2013 sales & distribution u2013 sales u2013 environment u2013 availability overview.
5. Replenishment lead time (RLT): is the time taken for the material to become available either internally (in house production) or externally (from a vendor). The most important things to consider during an external procurement are purchasing and MRP 2 (procurement) views of MMR where the processing time for purchasing, planned delivery time and goods receipt processing time are taken into account. On the other hand internal procurement is based on in house production time (MRP 2 view) goods receipt processing time or alternatively RLT time, which is found on MRP 3 view.
6. RLT (Replenishment Lead Time) is the time taken for the material to become available. RLT is only used when doing an ATP check (Available To Promise). The value of RLT for a material is specified on material master record.
7. There are three types of availability checks u2013
Check on basis of ATP quantities.
Check against product allocation.
Check against planning.
Configuring Availability check through Checking Groups u2013
1. The checking group + checking rule determine how the availability check is to be performed.
2. The checking group determines whether and how the system checks the stock availability and generates requirements for material planning. The checking group defines what type of requirements will be passed on i.e. summarized requirements (daily/weekly) or individual requirements for each sales order.
3. The checking rule applies to how the availability check is to be carried out at the transaction level. Note that you must define checking rules for each individual application such as for production orders for example. In Sales and Distribution, the checking rule is specified internally within the system and cannot be changed.
4. The checking rule, in conjunction with the checking group, determines the scope of the availability check for every business operation; that is, which stocks, receipts and issues are to be included in the availability check and whether the check is to be carried out with or without the replenishment lead time.
5. Briefly explaining the above u2013 checking group determines which type of requirement to be passed on to MRP whether it be individual or summarized and checking rule which is at the transaction level and can be configured independently for each application module, determines which stocks, receipts and issues to be taken into account. For performing an availability check checking group has to work in conjunction with checking rule.
6. Advantages of individual processing over summarized processing u2013
Backorder processing is possible.
You can access (MD04) order, line and schedule line individually which gives a greater control on available stock and requirements placed on stock.
The system automatically uses individual requirements in case of special stock items.
7. Required data for the Availability check to be carried out u2013
The Availability check must be switched on at the requirement class level.
The Availability check must be set at the schedule line level.
A requirements type must exist by which the requirements class can be found.
A plant must be defined in the sales order for each schedule line item (in other words plant must be defined for every material in MMR).
A checking group must be defined in the material master record in the MRP3 screen in the availability check field.
8. Configuring Availability check and defining Checking Groups u2013
Checking groups are introduced into the sales order based on the setting in the material master record.
SAP standard checking groups are 01 u2013 summarized requirements and 02 u2013 individual requirements or you can create your own by copying the standard ones.
Total sales and total deliveries columns are there to configure a checking rule to sum up requirements to post to MRP either individually or by day or week.
Block quantity required can be set if you want several users to be able to process the material simultaneously in different transactions without blocking each other.
The no check indicator is CHECKED when you DO NOT want the system to carry out ATP check.
9. Defining material block for other users u2013 the block check box is an indicator that enables you to block material master records of a particular material during the availability check and restrict other users from accessing same master record and reserve the material. If the block is not set, two users can confirm the same material at the same time for two different orders, not knowing if the stock is available or not. If you select this field, the material is blocked during the availability check and other users cannot: a) Make changes in the material master record. b) Create purchase orders for the material. C) Create orders for the material.
10. Defining default values for checking groups - Checking groups are introduced into the sales order based on the setting in the material master record.
However if there is no entry present in the material master record for the checking group, a default value can be set here, depending on material type and plant.
This default value will be used by the system depending on the material type mentioned in MMR and plant in sales order.
If an entry exists, this default value is over written by MMR.
11. Controlling Availability Check u2013 in this section, you tell the system what stock on hand and what inward and outward movements of stock it must take into account when performing the availability check in addition to whether or not to consider the replenishment lead time.
12. These settings are based on the checking group that is assigned to the material master record and the checking rule that is predefined and assigned to the sales and distribution transaction.
13. These settings carry out control both for sales order and delivery as well. This is due to the fact that you may want to include specific stock or incoming stock for the sales order, yet at the time of the delivery only include physical stock on hand waiting to be shipped.
14. It is possible to indicate to the system that you would like the availability check NOT TO CHECK the stock at the storage location level. This indicator is used to set the scope of the availability check.
15. It is used to switch off the check at storage location level. You create a reservation for a particular storage location. However, the scope of the availability check is set in such a way as to exclude the storage location. In this case, the system carries out the check at plant level only and does not take the storage location into account that is specified in the reservation.
16. Should you not want the system to automatically check RLT, you may indicate so here. RLT is the time taken for a material to become available. It is only used when doing an ATP check and is taken from MMR.
17. Defining the elements in the availability check entirely depends on the business needs, but a few tips are given under u2013
When controlling the Availability check at the time of the sales order, a purchase requisition does not necessarily indicate by it is going to come into the plant.
A shipping notification on the other hand - a confirmed purchase order u2013 is a good indicator of receiving stock on a specified date.
It is always recommended not to select the shipping notifications for the delivery requirements type as you may not actually receive the stock into plant or warehouse for which you are creating a delivery.
regards
anand

Updation of RG1 register for make-to-stock material

Dear Experts,
Will you please guide me how to update the RG1 register in case of sales for make-to-stock materials?
With regards,
Jhelum Roy

Read SAP help documentation [Update of Registers RG 1 and RG 23 (Part I)|http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm]

Mrp for make to order scenario

hi gurus,
I have got a different and challenging scenario in make to order planning. production planning has to be made on sales order basis.for eg : a particular finished product, a sale order of 100 nos is generated. but all 100 nos cannot be produced in single plant. so it has to be distributed to 2-3 plants. one more thing is, for make to order scenario, there is no fixed lot size. based on sale order quantity, planned order is created irrespective of fixed lot size maintained in material master. IF my batch size is fixed, for make to order also based on fixed based size, planned order has to be created.
Can anybody suggest a better solution for this scenario?
Thank you all in advance. all useful replies will be rewarded.
regards,
senthil

Hello,
For MTO, Lot for Lot order quantity is defaulted..
So your receipt element will be as per your Sales Order.
Try this:
In T. Code : OMI4, for Lot Size : EX
Change the MTO Lot size to "1" Lot-for-Lot with rounding.
(Which is Blank by default - lot-for-lot)
Maitain the Rounding Value in MRP-1 Screen or Use Rounding Profile..
This Helps..
Regards,
Siva

Daily Shift wise Report, Dash board reports

Dear all
With refering to the present project in 4.7 version the customer requirement is below.
1. Shift wise maintenance report - Here they are presently maintaining Section, shift, Date, From time, To time , Job descriptions, attenede by remarks.
In another coloum in same sheet they needs
From time, To time , Delay descriptions, attenede by remarks.
Then thirs is communication for next shift- there they are writing the texts which they are saying to next shift guys.
2. Another what they wants is regularly top managers wants to see the maintenance details ( prev order, down time, consumption cost etc ) in their system dash board(screen) . they are not willing to go sap. How to do this thro .Net or workflow . This is report should be fulfiiled by us.
3 Shutdown Planning report- here they are maintaining the date wise job hours in graphical form. How we can activate this
I request you please have some idea about this.

Dear Nandip/Iftikar,
Dear thanks 4 ur answers. I have asked the same with our abapers , but they are new and not able to help. i have well tried with notification customer table addition in spro. but its not helping as required.
The thing is i cant prepare the specs for this report. Example for shift we can create Z table. But Processing job description, Action taken, delay reasons how i can prepare the specs.
I request you to share your Program or specs please then its better for us. please send at thennarasu_kandasami@ welspun.com
Edited by: thenna arasu on Jun 2, 2008 2:12 PM

Standard report for period end stock report

Hi all,
My client is looking for a SAP standard report for material.Their req is as follows.
Open Bal (Stock)
Add: Purchase/Production
Less: Sales/Consumption
Closing Bal(Stock)
I have sugegested them MC.9,MB51,etc....but they are not satified.
They are not willing to go for a 'Z' report too....
Can any one suggest me whether their is any function module or bapi or badi thro' which i can fullfill my clients req. or any other better alternative like report painter,set,etc which suit my requirement.
(can you please let me know from table i can get these datas......just for knowledge purpose)
hope that anybody will guide me...
We are in 6.0 version
God Bless
Regards

Try Standard Report MB5B once.
Regards,
Ashok

Report for monthly/ weekly stock analysis

Hi,
Could anybody please let me know the transaction code for the following.
-> I would like to call a report for stock analysis (quantity basis not stock value), What I want is to call up figures of monthly / weekly usage over 6 months.
Thanks in advance

Hi ,
Pls try MC45.
Enter only one object to analyse either : plant/ pur org/sales org
Input your period to analyse
Report shows consumed materials with stock value and qty ..Click double line & triple line tabs to get more details.
thnks
nandu

Dash board report for make to stock scenario?

Similar Messages

Maybe you are looking for