Dash board report
Hi
Do we have any reports which will be having dash board kind of thing similar to what we have in Create Periodic Declarations in ENGR T-code.
I need to have two panes the left one shows the countries in tree structure and the right with the corresponding screen elements (The right pane gets changed based on the country we select in the left pane and we can carry out the country specific tasks).
One more thing is do we have any user exits through which we can include our own Z-objects to meet this type of requirement?
Any pointers to this will be of great help.
Cheers
Mohinder Singh
check ur mail.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Thanks
Edited by: Alvaro Tejada Galindo on Jan 7, 2009 3:14 PM
Similar Messages
-
Dash board report for make to stock scenario?
hi friends,
Here i am having a problem that, I need to do the dash board report to display the sales and production values (quanty s , value) with particular date comparission.
some more detailed.
my client need the report with day wise production and sales values with respective of material number. I can make the report if it is make to order situation. but , this is make to stock situation. and also mentioned that values should match the G\L Account ,ref: fs10n Transaction.
plz help out ......
rewards in advance.
Regards,
Naveen MThe definition of Organization structure might not allow you to do so
Please go throught the following link in detail http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Summary from the above link is as mentioned below
You can plan material requirements at plant level or for different MRP areas. With MRP at plant level, the system adds together stocks from all of the individual storage locations, with the exception of individual customer stock, to determine total plant stock. The requirements are combined in the planning run and procurement elements are created for these pegged requirements with unknown sources. Individual storage locations can be planned separately or be excluded from planning.
In the case of material requirements planning on an MRP area level, only the stocks from the storage locations or subcontractor assigned to the respective MRP area are taken into account. Only the requirements in this MRP area are combined and procurement elements are created for them. This enables you to plan material requirements specifically for certain areas. -
Crystal Report and Dash Board Report templates
Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
AdityaHi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM -
how to create dash board report
Please be more specifc and if your question is for creating dashboards - search the forums before posting
Edited by: Arun Varadarajan on Apr 19, 2011 9:12 PMIf you require help in Reports, please put it in the Reports
If you want to do the same in SQL, refer the analytic function, particularly SUM -
Daily Shift wise Report, Dash board reports
Dear all
With refering to the present project in 4.7 version the customer requirement is below.
1. Shift wise maintenance report - Here they are presently maintaining Section, shift, Date, From time, To time , Job descriptions, attenede by remarks.
In another coloum in same sheet they needs
From time, To time , Delay descriptions, attenede by remarks.
Then thirs is communication for next shift- there they are writing the texts which they are saying to next shift guys.
2. Another what they wants is regularly top managers wants to see the maintenance details ( prev order, down time, consumption cost etc ) in their system dash board(screen) . they are not willing to go sap. How to do this thro .Net or workflow . This is report should be fulfiiled by us.
3 Shutdown Planning report- here they are maintaining the date wise job hours in graphical form. How we can activate this
I request you please have some idea about this.Dear Nandip/Iftikar,
Dear thanks 4 ur answers. I have asked the same with our abapers , but they are new and not able to help. i have well tried with notification customer table addition in spro. but its not helping as required.
The thing is i cant prepare the specs for this report. Example for shift we can create Z table. But Processing job description, Action taken, delay reasons how i can prepare the specs.
I request you to share your Program or specs please then its better for us. please send at thennarasu_kandasami@ welspun.com
Edited by: thenna arasu on Jun 2, 2008 2:12 PM -
Hi,
Can anybody give me the step by step method to create Dash Board Report in BI 7.0
Thanks
Regards.
Asim.In BI/BW,
Dash board reports can be created using WAD (Web Application Designer).
Please gothrough the info about WAD Below
http://help.sap.com/saphelp_nw04/helpdata/EN/a9/71563c3f65b318e10000000a114084/content.htm
Creating Dashboard Reports step by step using WAD :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/908303d0-096a-2c10-9d9c-e1e3363cfe2c&overridelayout=true
Regards
Ram. -
Error while running script HyperV - Dash Board - VM and Storage Report
Hi Team,
I am getting below error while running HyperV dashoboard monitor & storage report script from Technet script library.
HyperV - Dash Board - VM and Storage Report
Finished processing VM - xxxx
Processing VM - xxxxx
Get-VHD : Unable to cast COM object of type 'System.__ComObject' to interface type 'System.Management.IWbemServices'.
This operation failed because the QueryInterface call on the COM component for the interface with IID
'{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object does not exist.
(Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:210 char:10
+ If (Get-VHD -VMID $vmDetails.VMID -ComputerName $cNodes.Name[$i])
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VHD], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.Vhd.PowerShell.GetVhdCommand
Get-VMNetworkAdapter : Unable to cast COM object of type 'System.__ComObject' to interface type
'System.Management.IWbemServices'. This operation failed because the QueryInterface call on the COM component for the
interface with IID '{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object
does not exist. (Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:238 char:12
+ If ((Get-VMNetworkAdapter -VMName $vmDetails.Name -ComputerName $cNodes.Na ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VMNetworkAdapter], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.HyperV.PowerShell.Commands.GetVMNetworkAdapterCommandHi ,
I found that the problem had been solved in the script blog by your self :
http://gallery.technet.microsoft.com/scriptcenter/HyperV-Dash-Board-VM-Disk-299bac7d/view/Discussions#content
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi expert
I was about design of Quality department manager Dash board
So please advice me how i can proceed wether as a Functional person i can do it alone or i need any technical help
Also please tell me what are the thing need to be in dash board normally
Any help is highly appreciable on this
Thanks in advance
Abu FathimaIt depends upen the business requirement. Standard SAP provides the following reports
QA33 : Inspection Lot List
Quality report against Inspection Lot - Results
QC55 : Quality Certificate List in Procurements
MMBE : Material stock overview u2013 Quality / Unrestricted / Block etc.
MB52 : Ware House stock & Valuation (Quality / Unrestricted / Block etc.)
MB51 : Material document List
CC04 : Display product Structure
MCXC : Material Analysis (Month wise)
MCXI : Material analysis
MCXB : Material inspection result analysis
MCVA : Vendor analysis u2013 material inspection lot wise
MCOA : Customer analysis u2013 m aterial inspection lot wise
QGA2 : Inspection results day wise
QS28 : List of Master Inspection Characteristics
QS26 : MIC where used lists
QS38 : List of Inspection methods
QS36 : Inspection method where used lists.
QS49 : Code Groups & Codes
QS59 : Selected sets
QM11 : Display Quality notification Lists
QM19 : Multilevel Quality notification List
MCXV : Quality Notification analysis
Regards,
SMruti -
Error while executing the BO Dash Board
Dear Sapians
i am facing the following issues in the BO while execute the Dash Board.
But the authorization working fine in BW side . In the filter of the BO Dash Board i am getting the correct values which i was restricted in the BW side.
Please help me to solve this.
Thanks
HajiHi Vamsi.
The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
Can you read this note and apply solution? The note refers a patch, but the problem is the same.
After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
BR Rafael Ceolim -
How can we show percentages in BO Dash board Manager(PMDM)
Hi ,
Please help me to find the option in Dash Board Manager to show percentages of metrics.
Regards,
TejaHello josborne,
i feel for you as a year ago i was undergoing the same problem. I was using Basler cameras for bar code reading and i was using two of them at a time. i was getting the same error. In my case the issue was resolved after much pain. i changed the PCI cards, switched between a lot of softwares and hardwares to get the required results. In the end my issue came down to the Fire wire cable. I was using a very cheap cable. Perhaps this is the only thing i can add that you might be using some non+standard fire wire cable.
perhaps you can try replacing it and then see the results.
Regards
Asad Tirmizi
Design Engineer
Institute of Avionics and Aeronautics
" Its never too late to be, what u want to be"
Using LabVIEW 8.2 -
Including an link to an help file(*.chm) in dash board
hi,
is it possible to place an *.chm file(help file) in the dash board .
i tried but OBI is not opening it up in that format.
can some one give me an solution to this.
thanks'.chm' is a Microsoft Compiled Help file that only works in Microsoft Explorer. You are advised to convert it to a friendlier format like HTML.
As per Microsoft, due to a remote code execution vulnerability, you cannot open .chm from a URL. However there are some workarounds in the link below:
http://support.microsoft.com/kb/896054
Coming back to Oracle BI, you could open the link in a separate window, and ask users to download the chm. Once downloaded locally, the chm file should work fine.
HTH,
Nilanshu -
Management Dash Board creation in SAP BI 7.0
Hi Experts,
Plz give me the construction procedure of Management Dash Board creation in SAP BI 7.0.
Any material/links/documents/suggestions with u plz share with me.
Any Pointers will really appriciated.
Thanks in advance.
Regards,
Chinna.Hi reddy
go through these help links
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a637fe07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/23/054e3ce0f9fe3fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
will surely helps u
Regards
Kiran
*Do assign points for helpfull answers,its the way of saying thanks in sdn
Message was edited by: ravi kiran naalla -
Integration of OBIEE Dash Boards with BPM Process
Hi ,
Could you please help me in integrating OBIEE Dash Boards with BPM . I thought of using 2 ways :
1) Integrating OBIEE with ADF First and then Integrating ADF with BPM . Its a long process but any other way if any one can help me .
2) Integrating OBIEE with BPM directly by generating webservices . but i couldnt get any options to generate the webservices for OBIEE .
Can anyone please guide me on this .
Thank you,
Sashank P.Check these links may help you.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16364/actions.htm
http://gerardnico.com/wiki/ide/eclipse/eclipse_how_to_consume_a_webservice_with_wtp#the_result
http://gerardnico.com/wiki/dat/obiee/web_service -
Dash board and app store in the same window
And I cant use either.. Untill I deleted all the wigets and then I could use the app store... How do I get the app store to launch seperatly from my dash board in Lion..
If it says the user id and passcode is not correct then it isn't, even if you think it is. Or someone has hacked your ID and changed your password.
-
Project planning board report to microsoft project report
hi all
good morning
i want to convert the project planning board report to Microsoft project and primavera report ...
please guide me through the steps......
Thanks in advance
SuryaHi,
OpenPS for Microsoft project (OpenPS4MSP) is an Add-on to SAP R/3 Project System which enables users to transfer project related data between Microsoft Project and R/3 Project System.
Refer SAP Note: 579761 for OpenPS.
Then to integrate SAP and Primavera , you can use various integration tools available. One of them is Primavera Inspire.
Refer :
http://www.oracle.com/applications/primavera/primavera-inspire-for-sap.html
Regards,
Amit
Maybe you are looking for
-
I'm currently having problems with my n97 facebook widget. Whenever I try to connect to it it keeps saying "Connection not availiable". I've been browsing the internet using my brother's wireless network for the first time then I've disabled it so
-
I am new to iWEB having finally moved over from MS FrontPage. So far so good. I can even work out all the ftp settings etc However, how do I set up sub-directories? So far all my pages are under the home page and are therefore in the nav. bar. I have
-
Notification center gives false info about alarms
I have my notifcation center set to display a summary for today and tomorrow. Some of the information it gives about alarms I have set is incorrected. It says: Your alarm is set for 3:42PM. You have an alarm set for 1:39PM. You have an alarm set for
-
Measuring Low Frequencies with LabVIEW and FieldPoint Using [c]FP-CTR-500/502
I am trying to use this example in a LabView 8.0 and a Field Point FP-CTR-502 module but without any sensor I get frequency and period values. Is that possible to use this example with LabView 8.0 or not? I am trying to use an anemometer Campbel Scie
-
Clarification regarding loadbalancing in RFC recever adapter
Hi, what is the loadbalancing in RFC when do we go with or without Load Balancing option in RFC? SOAP action in SOAP adapter. Thanks dhanush