Dashboard 4.0 and BW Direct Connectivity

Can we use Dashboard 4.0 with SAP BW 7.0 EHP1 SPS 5 to leverage the direct connector? I could not find this information under PAM for Dashboards 4.0, it only has supported OS info, nothing specific to BW connector.
Thanks.

I assume you question is about BICS connectivity.
Yes you can. Some notes from SP06 are required as well as a java patch available with SP07 need to be applied on BW side.
For Java Patch it can be applied on top of SP05 .
Thanks
Sanjay

Similar Messages

HT201210 you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues th

you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.

How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library.   Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC.   If iTunes still crashes, then if could be a number of other things, but probably not your library.   My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes.   If that doesn't work, then my next ideas you won't like.

Phones with PTT and Nextel Direct Connect (USA) su...

Hi !
I am looking to for Nokia phone that supports Push to talk option and supports Nextel Direct Connect network(USA). I could not find any information on the web and it turns out that some phones can even be upgraded with PTT.
Thanks and Happy new Year !

Mapping solves the problem. Groupwise has no corresponding field for "Direct Connect". For ease of data entry, I mapped the Direct Connect field in my 8350i with the pager field in my groupwise address books. The BB desktop manager now syncs the nextel direct connect #'s.
The steps are:
In BB desk top manager, select Sync Configuration; address book; advanced; Field Mapping (at bottom of list). Map an unused field in the GW address book with the direct connect field in the 8350i.
I assumethis would also work with outlook and others.

Mix settop box and direct connection to tv

I have just this week had FIOS installed with 1 digital lcd tv plus hd settop box. I expect to add another tv in the near future buy had thought that I might simply connect the coax directly to the new digital ready tv without a box to receive just the unencrypted channels. But, with the current setup I bypassed the settop box and connected the coax cable directly to my current tv (which has both digital & analog tuners & can receiver over-the-air channels well from rabbit ears). To my surprise (& disappointment) the tv set does not receive any signal.
Is this what happens when your service includes a settop box? Is it really so that you cannot have one set connected via a verizon box and another directly connected? Or am I do something stupid and missing some simple step?
Any/all comments/suggestons welcome.
Alan
Solved!
Go to Solution.

OK, thanks. But the set (vizio sv470xvt) has a qam tuner builtin Also analog (ntsc?) and atsc. The literature with it says it can receive cable channels without a box; it is not cablecard ready so presumably that's not an issue. I've searched on the web and all sites I've found with info confirm that. There is another thread (started earlier than this one, but I did't see it until later) in which many people say that they've had real problems with getting the unencrypted cahnnels; it appears that Verizon moves them around?!
I've tried several times both using the search menu and manually entering some (although not a lot) of some channels. The highest channel number allowed is 135; could that be a problem?
I_Am_The_Stig: your message came in after I started this but my set has options to search for analog/digital or either alone (I've tried both combined & digital only) but nor a 'cable'setting. Since the literature with the set claims it can receive cable signals I would assume it searches with all tuners. But still I don't get any channels found.
Alan

How can i delay the present of direct connected route?

Hi, I got 2 3550SMI switch interconnecting by Etherchannel. Each 3550 has an uplink to its upstream router (R1-SW1=SW2-R2). R1 and R2 connects to the remote site routers (say R3 and R4).
With EIGRP redistribute connected, R1 update the direct connected network via WAN link A to R3 where R2 does the same thing updating R4 via WAN link B.
The failover is fine after SW2 powered off. However, problem occured when I powered up SW2. During the bootup of SW2, there was carrier signal which brought up the ethernet port of R2 and the direct connected route presented in R2 then updating R4. Some of the traffic had started to come over from R4 via WAN link B to R2 while SW2 is still booting. (or Etherchannel was not yet ready). As a result, workstation connecting to SW1 cannot be reached for those traffic came from R4->R3->SW2.
I have tried to use "carrier-delay 60"on the ethernet port of R2. It seems solve the problem since the direct connected route delay 60sec. Within that 60 sec, no update via EIGRP from R2 to R4 so that all traffic still went through R3->R1. After that 60 sec, SW2 had already bootup and the etherchannel was also ready.
However, i can only do it with C3725 router. I've tried 1750, 25xx, 26xx and 3640-12.3T but the behavior was not expected (route still present immediately after carrier signal detected).
My questions are:
Is that command valid on Eth or FE interface?
Is there any different using that command with diff. router series, eg. ISR (18xx,28xx,38xx)?
Is there any condition that I could make it work? (at least 3725 worked)
Is there any other way to delay the present of that direct connected route?
Thanks.

Hello,
instead of the 'carrier-delay' command, you could try to change the EIGRP hello and hold-time intervals (which default to 5 and 15 seconds respectively on broadcast media such as Ethernet), in order to delay EIGRP convergence. So, on your Ethernet interfaces when you use the interface commands:
ip hello-time eigrp x 60
ip hold-time eigrp x 180
the redistributed routes will show up only after 60 seconds, which effectively does the same as the 'carrier-delay'...
Can you try that and see if that works for you ?
Regards,
GP

Can't make direct connection to router

I cannot connect to Internet. The cable Internet router was connected to my Airport Extreme, but connection kept going down. Service guy tested all lines and put in new router with latest firmware. He then bypassed Airport extreme and made direct connection of router to IMac for testing. It worked for about an hour, then connection lost again (link light on router is down-Internet connection tested on IMac, but no connection detected). Put in new Ethernet cable, but no difference. Service guy uses MACS so tested my connection software and settings, but seems okay. Argh! I plug in PC laptop and connection with modem is fine. Service person said he has seen this before, IMac onboard card (ethernet) has failed.
Is this possible? have rebooted, tried diagnostics cd, unplugged/plugged all cables, etc. IMac 2 yrs. old. How is this fixed & is it costly? Thanks.

With Apple Care extended warranty it would be covered. I believe that the Ethernet port is on the logic board so that may need to be replaced. A new logic board is easily US$600.00.
But your explanation is a bit hazy. First the wireless connection had issues and now the Ethernet has issues?
Dah•veed

Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or my wireless router but nothing. Just a flashing orange light. Help for a simpleton p

Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.

Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
Hmm, ideas anyone?
SBB

Inside lan is not reachable even after cisco Remote access vpn client connected to router C1841 But can ping to the router inside interface and loop back interface but not able to ping even to the directly connected inside device..??

Hii frnds,
here is the configuration in my router C1841..for the cisco ipsec remote access vpn..i was able to establish a vpn session properly...but there after i can only reach up to the inside interfaces of the router..but not to the lan devices...
Below is the out put from the router
r1#sh run
Building configuration...
Current configuration : 3488 bytes
! Last configuration change at 20:07:20 UTC Tue Apr 23 2013 by ramana
! NVRAM config last updated at 11:53:16 UTC Sun Apr 21 2013 by ramana
version 15.1
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname r1
boot-start-marker
boot-end-marker
enable secret 5 $1$6RzF$L6.zOaswedwOESNpkY0Gb.
aaa new-model
aaa authentication login local-console local
aaa authentication login userauth local
aaa authorization network groupauth local
aaa session-id common
dot11 syslog
ip source-route
ip cef
ip domain name r1.com
multilink bundle-name authenticated
license udi pid CISCO1841 sn FHK145171DM
username ramana privilege 15 secret 5 $1$UE7J$u9nuCPGaAasL/k7CxtNMj.
username giet privilege 15 secret 5 $1$esE5$FD9vbBwTgHERdRSRod7oD.
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group ra-vpn
key xxxxxx
domain r1.com
pool vpn-pool
acl 150
save-password
include-local-lan
max-users 10
crypto ipsec transform-set my-vpn esp-3des esp-md5-hmac
crypto dynamic-map RA 1
set transform-set my-vpn
reverse-route
crypto map ra-vpn client authentication list userauth
crypto map ra-vpn isakmp authorization list groupauth
crypto map ra-vpn client configuration address respond
crypto map ra-vpn 1 ipsec-isakmp dynamic RA
interface Loopback0
ip address 10.2.2.2 255.255.255.255
interface FastEthernet0/0
bandwidth 8000000
ip address 117.239.xx.xx 255.255.255.240
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map ra-vpn
interface FastEthernet0/1
description $ES_LAN$
ip address 192.168.10.252 255.255.255.0 secondary
ip address 10.10.10.1 255.255.252.0 secondary
ip address 172.16.0.1 255.255.252.0 secondary
ip address 10.10.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip local pool vpn-pool 172.18.1.1   172.18.1.100
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip dns server
ip nat pool INTERNETPOOL 117.239.xx.xx 117.239.xx.xx netmask 255.255.255.240
ip nat inside source list 100 pool INTERNETPOOL overload
ip route 0.0.0.0 0.0.0.0 117.239.xx.xx
access-list 100 permit ip 10.10.7.0 0.0.0.255 any
access-list 100 permit ip 10.10.10.0 0.0.1.255 any
access-list 100 permit ip 172.16.0.0 0.0.3.255 any
access-list 100 permit ip 192.168.10.0 0.0.0.255 any
access-list 150 permit ip 10.10.7.0 0.0.0.255 172.18.0.0 0.0.255.255
access-list 150 permit ip host 10.2.2.2 172.18.1.0 0.0.0.255
access-list 150 permit ip 192.168.10.0 0.0.0.255 172.18.1.0 0.0.0.255
control-plane
line con 0
login authentication local-console
line aux 0
line vty 0 4
login authentication local-console
transport input telnet ssh
scheduler allocate 20000 1000
end
r1>sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, + - replicated route
Gateway of last resort is 117.239.xx.xx to network 0.0.0.0
S*    0.0.0.0/0 [1/0] via 117.239.xx.xx
      10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks
C        10.2.2.2/32 is directly connected, Loopback0
C        10.10.7.0/24 is directly connected, FastEthernet0/1
L        10.10.7.1/32 is directly connected, FastEthernet0/1
C        10.10.8.0/22 is directly connected, FastEthernet0/1
L        10.10.10.1/32 is directly connected, FastEthernet0/1
      117.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C        117.239.xx.xx/28 is directly connected, FastEthernet0/0
L        117.239.xx.xx/32 is directly connected, FastEthernet0/0
      172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C        172.16.0.0/22 is directly connected, FastEthernet0/1
L        172.16.0.1/32 is directly connected, FastEthernet0/1
      172.18.0.0/32 is subnetted, 1 subnets
S        172.18.1.39 [1/0] via 49.206.59.86, FastEthernet0/0
      192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.10.0/24 is directly connected, FastEthernet0/1
L        192.168.10.252/32 is directly connected, FastEthernet0/1
r1#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst             src             state          conn-id status
117.239.xx.xx   49.206.59.86    QM_IDLE           1043 ACTIVE
IPv6 Crypto ISAKMP SA
r1 #sh crypto ipsec sa
interface: FastEthernet0/0
    Crypto map tag: giet-vpn, local addr 117.239.xx.xx
   protected vrf: (none)
   local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
   remote ident (addr/mask/prot/port): (172.18.1.39/255.255.255.255/0/0)
   current_peer 49.206.59.86 port 50083
     PERMIT, flags={}
    #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
    #pkts decaps: 2, #pkts decrypt: 2, #pkts verify: 2
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0
     local crypto endpt.: 117.239.xx.xx, remote crypto endpt.: 49.206.xx.xx
     path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
     current outbound spi: 0x550E70F9(1427009785)
     PFS (Y/N): N, DH group: none
     inbound esp sas:
      spi: 0x5668C75(90606709)
        transform: esp-3des esp-md5-hmac ,
        in use settings ={Tunnel UDP-Encaps, }
        conn id: 2089, flow_id: FPGA:89, sibling_flags 80000046, crypto map: ra-vpn
        sa timing: remaining key lifetime (k/sec): (4550169/3437)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE
     inbound ah sas:
     inbound pcp sas:
     outbound esp sas:
      spi: 0x550E70F9(1427009785)
        transform: esp-3des esp-md5-hmac ,
        in use settings ={Tunnel UDP-Encaps, }
        conn id: 2090, flow_id: FPGA:90, sibling_flags 80000046, crypto map: ra-vpn
        sa timing: remaining key lifetime (k/sec): (4550170/3437)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE
     outbound ah sas:
     outbound pcp sas:

hi Maximilian Schojohann..
First i would like to Thank you for showing interest in solving my issue...After some research i found that desabling the " IP CEF" will solve the issue...when i desable i was able to communicate success fully with the router lan..But when i desable " IP CEF " Router cpu processer goes to 99% and hangs...
In the output of " sh process cpu" it shows 65% of utilization from "IP INPUT"
so plz give me an alternate solution ....thanks in advance....

Direct Connection ABAP Proxy and Java Proxy possible ????

Hi Folks ,
As i read as direct connection possible between 2 SAP systems only ..
and also i read as WS Direct Connection u2013 (Java) ..
What it means ?? is it ABAP Proxy to Java Proxy using Direct connection ?? Like Java Client Proxy and ABAP Server proxy
I am not clear on this.. Could you please explain or help me on this . ??
Siva..

Hi ,
+You can do both for java proxies as well Abap proxies.+
As per the following points
1. Point-to-point connection is a new capability available with SAP NW PI 7.1. It allows applications or systems to send messages using WS-RM without going through a middleware, e.g. PI, but still using a centralized tool to design and
configure the interfaces and connection properties.
2. SAP XI 3.0/PI 7.00 or higher releases can be licensed based on the total volume of messages in
gigabytes (GB) that is processed per month. The size of the payload is determined in the integration
server. The information is then aggregated according to sender and receiver system.
Question :
1. If Message exchange between 2 SAP applications using direct connection .. Then dont we need to consider about licencing cost for volume of messages per month ?
2. So if i use ABAP Client Proxy to Java Server proxy scenario.. can i use direct connection ? Eg., SAP ECC to java application ?
In both the cases PI Runtime is not required .. Am i right ?
Please clarify..
Siva..

Direct connect macbook air and time machine

Any idea how to direct connect my macbook air with my time machine?
I am wanting to do a large restore from my old mb to my new air. This would take 18+hours over my network.
Few tidbits: my time machine isn't the newest version so it doesn't have a thunderbolt port. One usb and several ethernets.

Complete an Time Machine backup of ypur old machine to an external USB hard disk
If the Air is "brand new", you are in luck. Use Setup Asistant on the very first Boot. Upon that boot, the system will aks if you would like to transfer files, applications and settings from another computer. You would then attach your USB disk, the Time Machine Backup, and direct the sytem to import all the information from the TM backup.
Here is everything you need to know, and more.

Direct Connect OSPF and BGP AWS failover setup

Hi,
We recently installed AWS Direct Connect which was successful but now we are looking at the best way to automatically fail over if our Direct Connect fails to route via our back VPN.
The setup
Cisco 6500 distributes routes via OSPF internally to all production environments with one area set.
A second Cisco 2901 was installed to support the AWS Direct Connect which uses BGP with a single ASN. This router is connected to the Cisco 6500 and now within the OSPF area. Static routes exist to the Cisco 2901 currently which unless we physically detach from the network fail over wont work.
What we want to achieve
The Cisco 2901 Direct Connect to be the default AWS route until we have a link issue or alike and dynamically fail over to our VPN via the firewall to AWS. What we are confused is do we advertise these BGP routes within OSPF or should we setup BGP on the Cisco 6500?
I appreciate your time.

Hi,
We recently installed AWS Direct Connect which was successful but now we are looking at the best way to automatically fail over if our Direct Connect fails to route via our back VPN.
The setup
Cisco 6500 distributes routes via OSPF internally to all production environments with one area set.
A second Cisco 2901 was installed to support the AWS Direct Connect which uses BGP with a single ASN. This router is connected to the Cisco 6500 and now within the OSPF area. Static routes exist to the Cisco 2901 currently which unless we physically detach from the network fail over wont work.
What we want to achieve
The Cisco 2901 Direct Connect to be the default AWS route until we have a link issue or alike and dynamically fail over to our VPN via the firewall to AWS. What we are confused is do we advertise these BGP routes within OSPF or should we setup BGP on the Cisco 6500?
I appreciate your time.

A question about direct connect and getting emails on BB curve 8350i

can someone please help me....I'm new to BB and I just purchased a curve 8350i. First question when I direct connect to someone after i'm done with the call, i always get a message about the call i just did. How do I stop from getting those annoying messages. Second question I have an email set up in my BB. Now everytime I get a email I get a copy in my message icon and my email icon, how do I stop from getting a copy of my email messages. I would appreciate if anyone can anwer my questions...Thank You

1. no idea
2. you can find answers for this all over the forums, it gets asked atleast once a day.
the messages icon is a general incoming icon, all incoming messages go there, only item you can seperate from it are sms & mms texts.
if you use txting, you can seperate sms from the msgs, then hide msgs. use email and sms icons
when you delete your email from email icon it will automatically delete from msgs as well. its not actually 2 emails in 2 locations, its 2 locations pointing to the same email

Must DSL modem and Extreme be directly connected to Fios DVR?

When we had Fios installed a couple years ago, I reluctantly brought the DSL modem and Airport Extreme from the den to the family room so that the two could be connected directly to the DVR set top box. (We have no Fios coaxle jack in the den.) I now wish to connect an external 2T hard drive to the Extreme, but only if I can relocate everything (except the DVR STB and the TV) back to the den.
Would this be doable -- preferably without having a coaxle jack installed in the den? (Fios is also providing our internet service.) I assume having Frontier come out to install a coaxle jack in the den would be the simplest solution, but am hoping there might be a quicker and less expensive method.
And, isn't connecting the DVR STB directly to the DSL modem really only to enable ordering and viewing movies and other pay-per-view products?

I have the same issue with my 24" March 2009 iMac connecting through a Linksys BEFSR41b router. I can connect directly to my cable modem with no problem, but will not automatically find the router. I had to go into the Network control panel and for the ethernet go into Advanced and manually set the speed to 10baseT, Full Duplex, and turn off iPv6. The connectors on the 9 year old Linksys router are a bit flaky at this point. I hope a new router and cable will let me connect at 100baseT.

My TV has one Hdmi output. Can I use a splitter to connect apple tv and my direct tv DVR

Can I use an hdmi splitter to connect apple tv and my direct tv DVR? If yes, Any suggestions on a good splitter that doesn't cost too much ($40 at most).

I would get an HDMI switcher and plug in the ATV directly
I just posted this as an example, not sure of your location.
http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1318214572&sr=8-1

Can I cut and paste directions obtained via maps into a word doc or something so I can see them if I can't connect to the internet

Can I cut and paste directions form maps into a word doc - or save it somewhere on my iPad so I can access it when I can't access the Internet?

Take a screen short.
Simultaneously press the Sleep and Home button. You will notice an on-screen flash. If you have sound enabled, you will hear a camera click.
The screen shot is stored in Camera Roll.

Dashboard 4.0 and BW Direct Connectivity

Similar Messages

Maybe you are looking for