Dashboard and window sizes when connecting to LED display

Hello,
I just bought the LED display yesterday...gotta say thats its beautiful....i have one problem though....when i connected it to my macbook all the window sizes (e.g safari, itunes, dashboard) were too small....I tried modifying them...but now when i disconnect the display the window sizes on the macbook are too big and out of display....the resolution on the laptop is 1280X800 and on the screen its 1920X1200
any way to fix this?
Thanks

My experience is that if you are connected to the larger display and then disconnect without restarting, then you will see the behaviour you are describing.
If you restart the machine after disconnecting, the MB is smart enough to make everything fit within the native (and only available) resolution.
Good luck!

Similar Messages

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone. I've since deleted this podcast with no luck. I've restarted both the phone and the computer, still no luck. One computer is running Vista and the other Windows 7, both have the latest Itunes Update. Anyone have a fix for this?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

My iphone 4s connects and disconnects (repeatedly) when connected to my computer

my iphone 4s connects and disconnects (repeatedly) when connected to my computer, it works perfectly fine when connected to regular chargers, everytime i connect it to my computer it shows the charging symbol and then disconnects and reconnects in less then a second, it will repeat this process forever unless disconnected, sometimes it works perfectly fine and most of the times it does the same thing, I know for a fact its not the wire because i recently bought an ipad mini with retina and its usb is new, it worked with the retina for a day or two and then it kept connecting and disconecting repeatedly, my computer is two months old and i have new hardware in that machine, is it a problem in the usb power fluctuation? i am currently using windows 8.1 and i need solutions, this is super annoying, all my other devices work perfectly fine with the usb ports, all my usbs (2.0 and 3.0) do the connecting and disconnecting sometimes it even works ,what is the problem?

Hello Aqib2024,
Thank you for providing the details of the issue you are experiencing with your iPhone 4s. You have taken some really good steps to isolate the issue. I recommend following the steps in the article below to further isolate and troubleshoot this issue:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Thank you for using Apple Support Communities.
Best,
Sheila M.

How do I set the default window size when I open a Numbers 3.0 document

How do I set the default window size when I open a Numbers 3.0 document?
When I open an existing document it always open too small, I resize it but next time I open it it's small again! Please help! I used to be able to resize them then they stayed that size until I resized it no matter how many times I opened and closed it before upgrading to 3.0!!!!

This document can help you set the print settings for any type of printing. Not just for photos as the title suggests. You should not have to keep setting it every time.
Printer settings
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

I've set up email on my iPad (talk mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this

I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

I've set up email on my iPad (talktalk.net) and can send and receive mails when connected to my home router and ISP. When connected to a router at another location with a different ISP I can receive mail but not send it. Is there any way round this?

My external monitor flickers intermittently and wont function when connected to macbook pro

Hello everyone,
I recently purchased a cable to convert the thunderbolt/miniport to the VGA input on an external monitor I have had laying around for a few years. I am currently running osx 10.7.5 on a macbook pro.
When I plugged the cable to connect my macbook to the monitor, the monitor certainly recognized the cable, but the display would not do more than flicker in and out intermittently when connected to my macbook.
I have searched the forums for a solution to this, but haven't been able to find one that works. I tried resetting the SMC and restarting while holding cmd+P+R but none of these "fixes" seemed to help.

Simplest thing to try is a PRAM reset.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Excerpt from http://support.apple.com/kb/ht1379

When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

Hello there, RobenCaatje.
The following Knowledge Base article is specific for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Specifically:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

HT4914 why do some songs grayed out and only available when connected on wifi when trying to stream on iphone?

why do some songs grayed out and only available when connected on wifi when trying to stream on iphone?

I had this problem too - of grayed out music I could only play when in WIFI. I noticed when looking in iTunes, these grayed song were not chosen by me to sync on to my iPhone. They were stored in iCloud. I went to Settings > Music and then turned off "Show All Music" so only music that has been dowloaded to my iPhone will be shown.
I don't have iTunes Match, so you may have a different issue than what I had.

I want to switch dashboard and desktop positions when I touch the trackpad by 3 fingers and go up. Is there anyway to do that?

I want to switch dashboard and desktop positions when I touch the trackpad by 3 fingers and go up. Is there anyway to do that?
I tried to drag and drop but unfortunately that didn't work as well.
I am using mac pro without retina.

Ambersikes17, we don't want you to cancel your service. Let's get your phone working properly. Are you using the original charger that came with the phone? If so, does it the phone respond to the charger if it is positioned in a different manner?
Have you noticed if the freezing occurs with certain actions like messaging or using an application? Are these issues that you have had with all of the devices or just your current phone? Have you tried using your phone in Safe Mode? http://vz.to/1d0SZSq
AndreaS_VZW
Follow us on Twitter @VZWSupport

I have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency. and I need to work on music not only in time but the

i have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency.
and I need to work on music not only in time but the battery after that.
I ask for help please

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

MacBook Pro's Color LCD "shifts" when connected to external display?

I have a 2010 MacBook Pro with the hi-res anti-glare screen. I just noticed that the internal color LCD "shifts" its colors when I connect it to an external display (a Dell 2408 WFP). If I disconnect the external display, the colors internal color LCD go back to "normal".
I have two images to show what I mean:
This is what it looks like with the external display disconnected i.e. the MacBook Pro on its own: <http://www.flickr.com/photos/vazexqi/4558641163/sizes/l/>
This is what it looks like with the external display connected: <http://www.flickr.com/photos/vazexqi/4559271260/sizes/l/>
The wallpaper is from pixelgirlpresents.com. I didn't notice this problem before with my older 2006 Core Duo MacBook Pro (OS X 10.5.7).
My guess is that with the external display connected, somehow the color LCD decides to use the external display's profile as well (instead of its own).
Any ideas on why this is happening? And, more importantly, any ideas on how to fix this?
Thanks.
Nick
Message was edited by: Nicholas Chen

@Stefan: Thanks for the tip. I tried it but unfortunately it didn't solve the issue. The color is still off.
Incidentally, just out of curiosity, I tried these two things:
1) I tried the "Mirror Displays" option in the Displays Preference Pane. With this option enabled, both displays actually displayed the right colors (right with respect to how each display is calibrated).
2) I opened the same desktop wallpaper in Preview. Whenever I drag the Preview window so that it spans/crosses both displays (external and Color LCD), there is a light flicker in the wallpaper in the Preview Window. For that brief moment, I can see that the color is right before it changes to the shifted color on the Color LCD.
I found a possibly related thread on a different forum <http://arstechnica.com/civis/viewtopic.php?f=19&t=37841>. That doesn't seem to help when both displays are connected.
Now, I am just wondering if this is considered normal - wonky color shifts between the desktop/different windows happen when you have two displays connected....
Nick
PS: Note that I am not a graphics designer so my definition of right/wrong is just based on my experience looking at the wallpaper and remembering what it should look like on each display by itself.

Cannot change display resolution when connected to external display

On my 2.0GHz 13" MacBook, I have no problem with the display resolution when connecting to external display/projector when I am running in Mac OS, everything work perfectly! But things start to get messy when I am running in Windows VISTA 32 (installed within the Boot Camp 2.1). Whenever I connect to any external display/projector via a MiniDisplay-to-VGA cable, the resolutions on both my MacBook LCD and external display/projector drop to 640x480. And i am not able increase the resolution in the Display Settings. Does this mean that I have not installed the latest version of display drivers? Or is it that Apple did not provide the VISTA 32 drivers (in Boot Camp 2.1) that is compatible with the Mini Display port.

Cool!
I'm glad you have it fixed.
Please resolve the thread so others can find your answer faster.
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Quicktime Plugin crashes and Window size not correct when running a course from an LMS (Coursemill)

I am trying to run a course from an LMS (Coursemill) and a couple issues are occurring.
First, the quicktime plugin crashes, therefore the mp3 sound of the course does not play. When I reload the page, I get an "Unable to find API adapter" error message and the page won't load.
Also, the predetermined window size does not work properly and I end up with vertical and horizontal scroll bars which I do not want.
These issues are of high importance and need a solution ASAP. Please contact me.

If you haven't already visited the using QuickTime Plugin with Firefox KB article, I would recommend you first start there. If your problem still persists & no solution is found after referencing it just reply back to this response & we will go another route.
See:
[[Using the QuickTime plugin with Firefox]]

Time Machine: Backup folder changing size when connected to different computers

Can someone please help me wrap my head around why the size of my Time Machine backup folder changes when connected to different computers? I tried to be as thorough as possible. Thanks in advance for taking the time to read this.
I made a backup of my one laptop (MacBook Pro running 10.6.8) before installing Mavericks. The backup folder size is 258.56 GB and it is on a 1TB WD external. There are no other computers backed up in this folder.
Last night, I tried to copy the backup folder to another 1TB WD external and ran into the “you can’t do that” message. After some researching, I came across articles explaining how Time Machine handles HDs and, in order for me to copy my backup folder, the drive I want to copy the folder to needs to have the “Ignore ownership on this volume” deselected.
Okay, so here is my situation: I have the “Ignore ownership on this volume” deselected and journaling is correct on the drive I want to copy the backup folder to. So I can continue working on my laptop, I want to use a different computer to copy the backup folder from one HD to the other. The problem I’m having is each computer I own is showing me a different backup folder size O.o.
(1) The computer I want to use – a Power Mac G5 Quad running 10.4.11 (non intel) – is showing a backup folder size of 592.7 MB, but the HD shows there is 258 GB being used. When I drag copy, I only get a 592.7 MB backup folder. For some reason, the backup folder is the only folder acting this way. I compared other folders from the same and different externals and all the sizes match up perfectly no matter the computer they were connected to. How is this possible?
(2) My second option - Mac Pro (early 2009) running 10.9.4 – is showing a 256.15 GB backup folder size. Very close, but not 258.56 GB.
(3) My last option is to use the computer I’m trying to stay away from, the MacBook Pro running 10.6.8. This is the computer I backed up and is showing me the correct folder size = 258.56GB. As I mentioned, I'd like to work on my laptop while copying the backup folder using one of my other computers.
I am able to drag and drop from each computer, but the folder size depends on the computer I’m using. I don’t understand why I can't do a simple drag and drop of a 258 GB folder.
Many thanks!!

The directory files that you are seeing are not real. They are links to the actual backup files that are stored in a hidden directory on the drive. If you were to look at the same drive on a pc, you would see the folders and you would a list files that are in the folders but the files would all be 0 byte files and Windows will tell you the file is empty because there is nothing there but a link which Windows does not understand.
So the point is you can't just copy the backupd files. The best solution that I know of (and maybe someone else will chime in) for copying them is to mirror the drive with something like Carbon Copy or some other program.
See this site for more information about time machine and how it works: http://pondini.org/OSX/Home.html

ITunes and Computer freeze when connecting 160GB iPod classic

160 GB iPod Classic
Model: MC293LL
Version: 2.0.4 PC
iTunes version: 11.1.3
computers: 1 Win8 desktop,
1 Win7 Home Premium, Service Pack 1 Notebook
since yesterday I started having trouble with my iPod. When connecting it to the Notebook it showed a message: "There's a problem with this device. Scan the drive now and fix it". After clicking on scan and trying to fix the problem the notebook froze, so I connected it to me desktop, and it worked, it said that the problem was fixed. But when trying to open the iTunes it froze and after disconnecting it I realised the music was gone. So I connected it again, the same "There's a problem with this device. Scan the drive now and fix it"-message showed, but at the end the computer said it didn't detect any problem with the drive, so I opened iTunes and restored the iPod, and it worked but after that iTunes froze, then Windows Explorer and then the whole computer. Tried to connect the iPod to the Win7 Notebook and the same thing happened, first iTunes froze and then the computer froze, they both didn't show the blue screen.
What can I do? The iPod was already restored to the factory settings.

i had the same problem. all i did was download the newest version of itunes, which i had been putting off for months because it takes so long. after i did this itunes worked fine for me
hope this helps

Dashboard and window sizes when connecting to LED display

Similar Messages

Maybe you are looking for