Dashboard Calc widget bug

If I click on a number in the calc widget I get two of the numbers I clicked.
If I click and drag off the number button I get one. So it seems its responding to both the mouse button down and mouse button up events. Same with all the buttons. equals will give the result and then again.
keyboard entry works fine.
(Its a Logitech mouse, and please don't claim its a driver issue, its a widget/dashboard issue, since the mouse works fine *every where* else.)

Been there, done that. Even the trackpad built into the MBP does it. Never saw the prob until this MBP/Snow Leopard. Other Apple widgets work as expected.
Now I have noticed if I left click its OK. I've checked the button mappings (both logitech and apple's. pref pane)

Similar Messages

  • Where should i direct this question about dashboard and widgets?

    i have a question about the dashboard and widgets, but i have no clue where to ask?
    thanks.

    Hi,
    I advise you to use http://discussions.apple.com/forum.jspa?forumID=751 which is the area for dashboard
    volker

  • N8 music widget bug

    Music widget bug:
    -link-
    And how to fix without restarting phone?
    Nokia Please Help N9 live!
    Please Fix:
    Browser Downloads
    Video Call
    Voice Deal
    Fm Radio

    What exactly causes that bug? I ask because I tried for at least 15 minutes to recreate it now and I didn't manage once. Probably something wrong with your phone. i realized that when you go back to your home screen the play button is lit up and the skip buttons are dim even when playing music.
    On my phone when it's playing the play buttons turns to a pause button and the skip buttons light up. Was your phone always like this? If I knew how to make that happen I could help you pin point what's causing it.
    Show your appreciation. Hit that kudos button real hard

  • Mac Dashboard Ink Widget

    I have HP LaserJet Pro CM1415fn. Dashboard ink widget was working fine on my MacBook Pro 15" Early 2011. I recently upgraded to MacBook Pro 15" with Ratina Mid 2014 run Yosemite and migrated my data to my new Mac, Widget no longer communicate with the printer although printer is printing fine. Searching the forum suggested to reinstall. I deleted the old Widget and reinstalled version 12.34 printer drivers. Widget did not install. I saw no "Setup Assistance"  included. Even, when I used the "Setup Assistance" from my old Mac, it did not show the option of installing "Widget". Any help is much appreciated.

    Hi @AhmedAttia 
    It is possible the software has changed and there is no longer a widget. What you can do is, check the Applications folder, look for the HP folder and if you find the Widget there you can create a short cut.
    The older version was version 12.23, thus the issue could very well be the difference in software.
    The migrated date would have been problematic because it is incompatible with 10.10.
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Dashboard stocks widget

    what is the time delay of the stocks rate reflected in the dashboard stocks widget. also, does the same answer apply to the stocks app in iphone?

    AceNeerav,
    From memory my Stocks Widget says that the quotes are delayed by 20 minutes although having said that I note that even though the FTSE data is changing (ie, that market is open), the information line at the bottom says that "Markets closed (5:54 PM)" which I assume it to be referring to the Australian market given that I am in Western Australia. My iPhone Stocks app says "Quotes delayed 20 minutes" even though the Australian market (the one I have selected) is closed. Go figure.
    Chris

  • Dashboard Movie Widget Date Update

    Is there a way to update the date of the dashboard movie widget aside from restarting the computer? I wish it were smarter and knew what day it was.

    Mine has not been working for a couple of months now.  I just noticed that this widget does not recognize any Canadian cities anymore.  It used to work no problem up till September.  Its really too bad as I like this widget a lot.  Hope Apple fixes this or if anyone else has any suggestions on how to.  Thanks.

  • HT2492 ML Dashboard Calendar widget has lost the ability to change the date.

    In ML the Dashboard calendar widget has lost the ability to change the day to other days. You can still navigate to different months with the arrow keys, but clicking on any day has no effect. I have not found a keystroke/mouse combination that allows the date to be changed from today's date.
    This is a useful function for me, to quickly be able to see what I have scheduled on any day. Now I have to open iCal, which is annoying.

    You are correct that there is no way to sort jobs in the print queue window in Snow Leopard. This is to be considered expected behavior. In other words, that's the way the software engineers intend it to work in Snow Leopard. You should provide Apple with feedback as to what you want. You can file a report at: _http://www.apple.com/feedback/macosx.html_.
    Matt

  • On the install of mavericks i have lost dashboard & my widget help.

    on the install of mavericks i have lost dashboard & my widget help.

    You may try this applescript program.
    log "  --- Starting on " & ((current date) as string) & " --- "
    -- percent
    set volume output volume 35 without output muted
    Start the AppleScript Editor
    /Applications/AppleScript/Script Editor.app
    In Snow Leopard it's at: /Applications/Utilities/AppleScript Editor
    Copy the script text to the Applescript editor.
    Save the text to a file as an application and do not check any of the boxes below.
    If you want access to the script from your Script Menu, move the script (the saved script application file) to your
    ~/Library/Scripts folder. You can also drag it to your Dock or make an alias for it on the Desktop.<br><br>
    To debug, run the script within the Applescript Editor. Click on the event log tab at the bottom of the window. Click  on the run icon.  The results from the log statement will be shown at the bottom of the screen.

  • How do I fix this Clock Dashboard Widget bug-ish thing?

    When I installed Mavericks from Mountain Lion, the clocks on Dashboard went cookoo. Other than what you see, there is no "i" button to change to the city I want to see the time for.
    I have a early 2011 13inch MBP.
    Does anyone else have this problem?
    or
    Does anyone know how to fix this so I can read the clocks fine?

    Hi, I had this same problem too...all you have to do is: remove the widget from the dashboard, then delete this file widget-com.apple.widget.worldclock.plist from the Library folder and reboot your computer. Once you've done this you can try readding the clock to your dashboard and it should be fixed.

  • Dashboard stock widget

    I cannot add a new stock to the stock widget. I keep getting "failed to validate symbol". I have added symbols before, although it was months ago, and in fact had three of them on the widget before removing them. I even tried adding back the ones that were already working.
    To fix the problem I have tried the following:
    Restarted the computer.
    Turned the computer off and then back on.
    Taken the stock widget off the desktop, restarted the computer, and added it back.
    Trashed the dashboard file in preferences and restarted the computer.
    None of these things work; please help.

    Same problem here.
    But this has been discussed here before and there are some ideas here:
    http://discussions.apple.com/thread.jspa?threadID=2611759
    although none of them is a straight fix that makes the Apple widget work again.
    There is also this:
    http://www.dreamlight.com/insights/bugs/Apple/stockswidget.html

  • HTML Snippet widget bug report.

    Dear Apple iWeb 08 Engineers.
    I didn't know where to send this bug report and so I have resorted to this forum. I hope it gets to you somehow.
    When creating a simple HTML Snippet in a page it seems that the piece of code that refers to the newly created widget in the .html for the page has a bug in it. For example, I have a page on my website called "Animation"; it has a simple HTML Snippet the code for which has been tested (by viewing the file widget0_markup.html in a browser). In Animation.html the following line appears
    <iframe id="widget0-frame" src=".//Animationfiles/widget0markup.html" frameborder="0" style="width: 100%; height: 100%;" scrolling="no" marginheight="0" marginwidth="0" allowTransparency="true"></iframe>
    Surely the pathname in the "src" option is in error (what the **** is .//?). If I change it to ./ by hand then everything works. Please change this asap, because at the moment I have to go into every page and change it by hand after publishing.
    Many thanks, Marvin.

    Thanks for the reply, but I'm afraid that I'm not convinced.
    In all the flavours of unix that I've ever used ./ is the current directory, ../ is the parent directory and ../../ is the grandparent directory (not .// as you suggest). In any case, the path name of source file in question is ./Animationfiles/widget0markup.html (assuming the code in question is in the file Animation.html) and so going up the tree into the grandparent directory is not what you want to do anyway; the directory Animation_files is always in the same directory as Animation.html and the file widget0_markup.html is saved, by iWeb upon publication, in the directory ./Animation_files.
    In short, I still think it's a bug, but thanks for the advice; I apologise if I am wrong.
    Marvin.

  • Critical Keynote widget bug on iBooks Author 2.2

    Hello,
    I think I found a bug on  ibooks Author 2.2. If a Keynote widget is added to a .iba document created on IBA 2.2, it cannot be previewed in iBooks 3.2 for iOS 7 or iBooks 1.0.1 for OSX Mavericks. The widget only works when viewed on iOS 8 or OSX Yosemite.
    Check the attached screenshot.
    Has anybody experienced this bug? Any ideas or fixes?
    I think this should be fixed ASAP because there are still thousands of users reading ibooks on iPads with iOS 7 or earlier installed.

    Confirmed. This isn't the only time we've had issues with the keynote widget. Because of this and a number of other issues and glitches with ibooks / ibooks author we've stopped recommending it to our clients as a platform for professional use. A pity as it showed great promise at first. The support is non existent (of course)  and the software may or may not work depending on so many factors that it seems more like a hobby software project than something published by a professional outfit.

  • Text validation widget bug?

    I have used text validation in a table body like this:
    <table style="width:20%">
    <tbody id="login_val">
    <tr><td>E-Mail</td><td><input
    name="login" id="login" type="text"></td></tr>
    <tr class="textfieldRequiredMsg"><td
    colspan="2">Enter your login E-Mail.</td></tr>
    <tr class="textfieldInvalidFormatMsg"><td
    colspan="2">Enter a valid E-Mail address.</td></tr>
    </tbody>
    <tbody>
    <tr><td></td><td><input
    name="submint" id="submit" type="submit" value="Log
    In"></td></tr>
    </tbody>
    </table>
    Initialised with: var login_val = new
    Spry.Widget.ValidationTextField("login_val", "email",
    {validateOn:["blur"]});
    If there is an input error - the error table-row shows up as
    expected but the first td of the first row (the one showing the
    word 'E-Mail') suddenly has a colspan"2" on it too. (tested only in
    Firefox)
    Do I miss something here? Or is this a bug? Feature???
    Cheers from down under.

    Hello,
    I think the problem in this situation appears because of the
    CSS definition. The default definition right now to display an
    error message is:
    .textfieldRequiredState .textfieldRequiredMsg,
    display: inline;
    color: #CC3333;
    border: 1px solid #CC3333;
    When this class is used with table rows the results are
    unexpected because the table rows have a special status and cannot
    normally be displayed as an inline element. Unfortunately your
    scenario hit a browser limitation in the CSS implementation. The IE
    because it doesn't have yet support for display:table as the CSS2
    specify will render "correctly (?!)" the display:inline or
    display:block on table row elements. FF because it has correct
    support for display:table-row will work incorrectly with the inline
    as the specification mention.
    The only solution I see is to manipulate the CSS height
    property, margin and padding instead of manipulating the display if
    you want to continue to use the table structure above.
    Regards,
    Cristian

  • Tooltip widget bug? Shows up correctly in Muse preview, distorted content on business catalyst.

    This is a cross question from Adobe Muse Bugs, as it also affects business catalyst.
    I have 3 panels on my tooltip.
    3 different descriptions for each one.
    Preview mode shows up accurately on what I have designed, but when uploaded to business catalyst, only the distorted description from the first tooltip panel shows up.
    The descriptions are really just rasterised text, with a translucent rectangle behind it.
    This issue is not observed when viewing exported html file. Browser used to test is Google Chrome
    What is the problem here? The widget? Muse? Business Catalyst? Chrome? And how do I fix it?
    I'm not sure how I'd upload the html files here, but the link for the hosted site on Business Catalyst is here: Home

    Ok, I've checked the site linked here with Safari.
    It works normally, so I'm thinking it's a Chrome problem.

  • Dashboard Clock Widget like iPhone Clock

    I've had an iPhone for a couple of years, and this week I'm finally making the switch from PC to Mac. One of the really simple questions I have is where to find a clock widget for the dashboard that functions like the iPhone clock with time zone clocks, timer, and alarms. Everything I've managed to dig up so far is too bloated for simple daily tasks like quickly checking what time zone a client is in before calling. Is there anything out there someone can recommend that is as easy to use and straightforward as the iPhone clock app except for the dashboard?

    Actually if you want to do a bit of tinkering you can change the clock face to ANY city town or village you likr just follow this link
    http://www.macosxhints.com/article.php?story=20050430193250534

Maybe you are looking for

  • Error while creating an Item Proposal

    Hello Experts, When I am trying to create an Item proposal (T Code VA51 for order type PV) , after entering the Description , Validity dates, Material and Qty, while saving system is issuing an hard error " Sold to Party is not maintained in the sale

  • Account of the opportunity is not populated after the creation of a task

    Hi, In our project, we are using the Opportunity Object after the creation of a task. Our tasks are always related to an existing account. I was wondering why when I create an opportunity from a task, the field "Account Name" is not populated by defa

  • Oracle 9i Lite on Win98 and EPOC (Psion 5mx)

    Hi, I've tried several times to setup up Oracle 9i lite on my Psion 5mx. Obviously there are several new files and new icons. But I experience problems 1/when I try to launch OKDemo, I have a not found message. 2/When I use MySQL and create a new DB,

  • Want to run applet thr App Server

    Please note - very very new to java - I have developed one simple applet (with one form - after submit run an ASP file - redirect to ok page). Currently applet jar file it is on web server. But now I want to use 3-tier config. Following is the config

  • Moving Appraisal Template to QA

    Hi Guys I understand that we can move Appraisal Template by download/upload method or by right clicking on the Appraisal Template to create transport and move this transport to QA and so on. For Category group and category, we can do manual configura