Dashboard "Double-Windowing"
Has anyone else seen this problem? Both in Firefox and IE, when I load a dashboard, the browser creates another version of itself within itself to display the dashboard, complete with two versions of Recently Viewed, Favorites, Search and so forth. I'll add an attachment if I can which shows the problem.
Clarification - it's actually displaying the entire OnDemand frame within the OnDemand frame. I wish I could add an attachment, but alas.
Thanks,
Mike
Edited by: mcombo on Oct 28, 2009 6:52 AM
Can you post your URL here?
also check out this thread for the correct URL syntax.
Dashboard Path
Similar Messages
-
Every time I click on a separate widget in dashboard, my window switches back to my desktop. How do I prevent this?
Gets pretty annoying when I am switching from one sticky to another.That’s not a virus; it’s adware. Click here and follow the instructions, or if desired, run Adware Medic.
(115040) -
Dashboards for window 7 mobile
Are there plans to make apps for OBI dashboards on windows 7 mobile like there is for iphone Oracle Business Indicators?
Hi:
Install all the drivers listed under the chipset section.
If your model has an Intel graphics adapter, just install the Intel HD graphics driver listed under the graphics section.
You need the Realtek ethernet driver under network.
You need the Realtek card reader driver under storage.
I don't know what model wireless card your model uses, so please do the following and I will figure that out and tell you what drivers you need for that.
Go to the device manager and click on the device named Network Controller.
Then click on the Details tab at the top of the Network Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the item named Hardware ID's.
Post the top string of characters you see in the window that start with PCI\VEN.
After you install the drivers I suggested you should have most of the devices installed.
You can find the hardware ID for any remaining devices needing drivers using the above approach and I will post the links to those too.
Unknown devices first line will not start with PCI\VEN. But post the top line for any of those too. -
Dashboard and window sizes when connecting to LED display
Hello,
I just bought the LED display yesterday...gotta say thats its beautiful....i have one problem though....when i connected it to my macbook all the window sizes (e.g safari, itunes, dashboard) were too small....I tried modifying them...but now when i disconnect the display the window sizes on the macbook are too big and out of display....the resolution on the laptop is 1280X800 and on the screen its 1920X1200
any way to fix this?
ThanksMy experience is that if you are connected to the larger display and then disconnect without restarting, then you will see the behaviour you are describing.
If you restart the machine after disconnecting, the MB is smart enough to make everything fit within the native (and only available) resolution.
Good luck! -
Dashboard as window in Spaces?
Anyone know if there is a way to make Dashboard one of the window zones in Spaces? Sorry if this is a feature request, but it would make my life so much easier! (I love Spaces.)
I was thinking exactly the same thing the other day. It no longer makes any sense for Dashboard to have its own (crippled) workspace. Let us put widgets where we want them! Apple could even use a default Spaces desktop to simulate the existing capability, but users could then move the widgets around as required. However, AFAIK there is no current way to do this.
-
Getting a Dashboard quit window message...
Hello all.
I have started to add some widgets to Dashboard, all downloaded from Apple's site, but I will state that not all the widgets in their own site have stated that they are Leopard 10.5 compatible. I've also added two 'Web Clip' widget from my local websites, one is a company's share price and the other the local petrol/gas price.
Sometimes upon the 2nd or 3rd time reactivating Dashboard, I notice the widgets have "frozen"... I know this because one of the widgets I downloaded was "fan" and the fans (of the mac's internal fan speed etc) has stopped turning...
*Anyway, so I exit Dashboard and return to the Desktop, and not long, I would get this pop-up window message:*
+(Yellow Exclamation Point) The application DashboardClient quit unexpectedly.+
+Mac OS X and other applications are not affected.+
+Click Report to see more details or send a report to Apple (Ignore/Report... Buttons)+
So I send the report anyway thought Apple could use all the information.
I bet this has something to do with the "frozen" widgets inside Dashboard... maybe it's one of the widgets or not, I am not sure.
Thanks and cheershi,
i'm getting the same thing (so i figured i'd add to this post), but all i did was run the most recent software update and my dashboard started "unexpectedly quitting" on me. i didn't add any new widgets or change anything in it. it's annoying and a little unnerving. i'm wondering if it'll cause system instability later on. any advise would be much appreciated.
thanks a bunch! -
What's with the double window appearing out of nowhere in Address Book?
There is one window visible all through the Time Machine process until the very end when suddenly a phantom Address book window appears.
To recreate:
Open Address Book
Open Time Machine
Scroll to the oldest address book window in TM
Click Cancel
TM returns to present and as TM quits the two windows appear.I duplicated this, and indeed, a second window shows up. However, it vanishes in less than a second on my machine. I believe it's the one shown while in Time Machine mode; apparently, when viewing the address book, Time Machine moves back to "real time" before closing the window, the opposite of what one usually sees. Are you saying that in your case, the second window stays open?
Daniel -
Please review following SQL and it's execution plan. Why am I seeing 2 WINDOW SORT operations even though in sql . analytic function "row_number" has been used only once?
Also, In step 3 of the plan, why "bytes" goes from 35 GB(4th step) to 88GB when row count remains the same. In fact , since I'm selecting just 1st row , both row count as well as "bytes" should have gone down. Shouldn't it?
SELECT orddtl.ord_dtl_key, orddtl.ld_nbr, orddtl.actv_flg,
orddtl.ord_nbr
FROM (SELECT /*+ parallel(od, 8) parallel(sc,8) */ od.ord_dtl_key, od.ld_nbr, od.actv_flg,
od.ord_nbr,
ROW_NUMBER () OVER (PARTITION BY od.ord_dtl_key, od.START_TS ORDER BY sc.START_TS DESC)
rownbr
FROM edw.order_detail od LEFT OUTER JOIN edw.srvc_code sc
ON ( sc.srvc_cd_key = od.srvc_cd_key
AND od.part_nbr = sc.part_nbr
AND od.item_cre_dt >= sc.START_TS
AND od.item_cre_dt < sc.END_TS
WHERE od.part_nbr = 11 ) orddtl
WHERE orddtl.rownbr = 1;Execution Plan
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | Pstart| Pstop | TQ |IN-OUT| PQ Distrib |
| 0 | SELECT STATEMENT | | 88M| 121G| | 2353K (65)| 00:33:07 | | | | | |
| 1 | PX COORDINATOR | | | | | | | | | | | |
| 2 | PX SEND QC (RANDOM) | :TQ10002 | 88M| 121G| | 2353K (65)| 00:33:07 | | | Q1,02 | P->S | QC (RAND) |
|* 3 | VIEW | | 88M| 121G| | 2353K (65)| 00:33:07 | | | Q1,02 | PCWP | |
|* 4 | WINDOW SORT PUSHED RANK | | 88M| 35G| 75G| 2353K (65)| 00:33:07 | | | Q1,02 | PCWP | |
| 5 | PX RECEIVE | | 88M| 35G| | 2353K (65)| 00:33:07 | | | Q1,02 | PCWP | |
| 6 | PX SEND HASH | :TQ10001 | 88M| 35G| | 2353K (65)| 00:33:07 | | | Q1,01 | P->P | HASH |
|* 7 | WINDOW CHILD PUSHED RANK| | 88M| 35G| | 2353K (65)| 00:33:07 | | | Q1,01 | PCWP | |
|* 8 | HASH JOIN RIGHT OUTER | | 88M| 35G| | 1610K (92)| 00:22:39 | | | Q1,01 | PCWP | |
| 9 | PX RECEIVE | | 1133K| 32M| | 1197 (20)| 00:00:02 | | | Q1,01 | PCWP | |
| 10 | PX SEND BROADCAST | :TQ10000 | 1133K| 32M| | 1197 (20)| 00:00:02 | | | Q1,00 | P->P | BROADCAST |
| 11 | PX BLOCK ITERATOR | | 1133K| 32M| | 1197 (20)| 00:00:02 | KEY | KEY | Q1,00 | PCWC | |
| 12 | TABLE ACCESS FULL | SRVC_CODE | 1133K| 32M| | 1197 (20)| 00:00:02 | 1 | 1 | Q1,00 | PCWP | |
| 13 | PX BLOCK ITERATOR | | 88M| 32G| | 188K (27)| 00:02:39 | KEY | KEY | Q1,01 | PCWC | |
| 14 | TABLE ACCESS FULL | ORDER_DETAIL | 88M| 32G| | 188K (27)| 00:02:39 | 1 | 1 | Q1,01 | PCWP | |
Predicate Information (identified by operation id):
3 - filter("orddtl"."rownbr"=1)
4 - filter(ROW_NUMBER() OVER ( PARTITION BY "od"."ORD_DTL_KEY","od"."START_TS" ORDER BY INTERNAL_FUNCTION("SC"."START_TS"(+))
DESC )<=1)
7 - filter(ROW_NUMBER() OVER ( PARTITION BY "od"."ORD_DTL_KEY","od"."START_TS" ORDER BY INTERNAL_FUNCTION("SC"."START_TS"(+))
DESC )<=1)
8 - access("od"."part_nbr"="SC"."part_nbr"(+) AND "SC"."SRVC_CD_KEY"(+)="od"."SRVC_CD_KEY")
filter("od"."ITEM_CRE_DT"<"SC"."END_TS"(+) AND "od"."ITEM_CRE_DT">="SC"."START_TS"(+))Thanks Jonathan for your reply.
This type of pattern happens quite frequently in parallel execution with aggregation. A layer of slave processes can do partial aggregation before passing a reduced result set to the query co-ordinator to finish the job.
I wouldn't be 100% sure without building a model to check, but I think the logic of your quer allows the eight slaves to identify each "rownumber() = 1" for the data set they have collected, and the allows the query coordinator to do the window sort on the eight incoming rows (for each key) and determine which one of the eight is ultimate the highest date.So is it a normal pattern? Will step#7 & #4 do the same amount work as stated in PREDICATE information part of execution plan.?
You’re correct! There are 8 slave processes appears to be performing WINDOW PUSHED RANK ( Step#7 in Execution Plan ) as you see in following output. Per execution plan and your comment, each one appears to be finding partial set of rows row_num <= 1. It’s apparently doing lots of work and very slow even with 8 processes. So not sure , how slow would be QC doing the same work just by itself.
And as you see below , it’s [Step#7 ] very slow and half of the slaves performing multi pass sort operation. Even though , it was estimated 35GB for that operation, why it’s estimating work area size of only 6-14MB only? Also, It’s allocating so low amount of PGA than expected. P_A_T was set to approx 11 GB. Currently this was the only query/operation on the Instance.
Why it’s not allocating more PGA for that operation? [My apologies for diverting from my original question ].
I have included PGA stats as well here which was taken 5-10 minutes later than other PQ session information. It’s still shows that there is no shortage of PGA.
Moreover, I have observed this behavior (under allocation of PGA) especially for WINDOWS SORT operations for other SQLs too. Is it normal behavior ? I’m on 10.2.0.4.
select
decode(px.qcinst_id,NULL,username,
' - '||lower(substr(pp.SERVER_NAME,
length(pp.SERVER_NAME)-4,4) ) )"Username",
decode(px.qcinst_id,NULL, 'QC', '(Slave)') "QC/Slave" ,
to_char( px.server_set) "SlaveSet",
to_char(s.sid) "SID",
to_char(px.inst_id) "Slave INST",
decode(sw.state,'WAITING', 'WAIT', 'NOT WAIT' ) as STATE,
case sw.state WHEN 'WAITING' THEN substr(sw.event,1,30) ELSE NULL end as wait_event ,
to_char(s.ROW_WAIT_OBJ#) wait_OBID,
decode(px.qcinst_id, NULL ,to_char(s.sid) ,px.qcsid) "QC SID",
to_char(px.qcinst_id) "QC INST",
px.req_degree "Req. DOP",
px.degree "Actual DOP"
from gv$px_session px,
gv$session s ,
gv$px_process pp,
gv$session_wait sw
where px.sid=s.sid (+)
and px.serial#=s.serial#(+)
and px.inst_id = s.inst_id(+)
and px.sid = pp.sid (+)
and px.serial#=pp.serial#(+)
and sw.sid = s.sid
and sw.inst_id = s.inst_id
order by
decode(px.QCINST_ID, NULL, px.INST_ID, px.QCINST_ID),
px.QCSID,
decode(px.SERVER_GROUP, NULL, 0, px.SERVER_GROUP),
px.SERVER_SET,
px.INST_ID
UNAME QC/Slave SlaveSet SID Slave INS STATE WAIT_EVENT WAIT_OBID QC SID QC INS Req. DOP Actual DOP
APPS_ORD QC 1936 2 WAIT PX Deq: Execute Reply 71031 1936
- p006 (Slave) 1 1731 2 WAIT PX Deq: Execution Msg 71021 1936 2 8 8
- p007 (Slave) 1 2159 2 WAIT PX Deq: Execution Msg 71021 1936 2 8 8
- p002 (Slave) 1 2090 2 WAIT PX Deq: Execution Msg 71021 1936 2 8 8
- p005 (Slave) 1 1965 2 WAIT PX Deq: Execution Msg 71021 1936 2 8 8
- p001 (Slave) 1 1934 2 WAIT PX Deq: Execution Msg 71021 1936 2 8 8
- p004 (Slave) 1 1843 2 WAIT PX Deq: Execution Msg 71021 1936 2 8 8
- p000 (Slave) 1 1778 2 WAIT PX Deq: Execution Msg 71021 1936 2 8 8
- p003 (Slave) 1 1751 2 WAIT PX Deq: Execution Msg 71021 1936 2 8 8
- p009 (Slave) 2 2138 2 NOT WAIT 71031 1936 2 8 8
- p012 (Slave) 2 1902 2 NOT WAIT 71031 1936 2 8 8
- p008 (Slave) 2 1921 2 NOT WAIT 71031 1936 2 8 8
- p013 (Slave) 2 2142 2 NOT WAIT 71031 1936 2 8 8
- p015 (Slave) 2 2091 2 NOT WAIT 71031 1936 2 8 8
- p014 (Slave) 2 2122 2 NOT WAIT 71031 1936 2 8 8
- p010 (Slave) 2 2146 2 NOT WAIT 71031 1936 2 8 8
- p011 (Slave) 2 1754 2 NOT WAIT 71031 1936 2 8 8
SELECT operation_type AS type ,
workarea_address WADDR,
operation_id as OP_ID,
policy ,
vwa.sql_id,
vwa.inst_id i#,
vwa.sid ,
vwa.qcsid QCsID,
vwa.QCINST_ID QC_I#,
s.username uname,
ROUND(active_time /1000000,2) AS a_sec ,
ROUND(work_area_size /1024/1024,2) AS wsize ,
ROUND(expected_size /1024/1024,2) AS exp ,
ROUND(actual_mem_used/1024/1024,2) AS act ,
ROUND(max_mem_used /1024/1024,2) AS MAX ,
number_passes AS p#,
ROUND(tempseg_size/1024/1024,2) AS temp
FROM gv$sql_workarea_active vwa ,
gv$session s
where vwa.sid = s.sid
and vwa.inst_id = s.inst_id
order by vwa.sql_id, operation_id, vwa.inst_id, username, vwa.qcsid
TYPE WADDR OP_ID POLI SQL_ID I# SID QCSID QC_I# UNAME A_SEC WSIZE EXP ACT MAX P# TEMP
WINDOW (SORT) 07000003D2B03F90 7 AUTO 8z5s5wdy94ty3 2 2146 1936 2 APPS_ORD 1181.22 13.59 13.59 7.46 90.98 1 320
WINDOW (SORT) 07000003D2B03F90 7 AUTO 8z5s5wdy94ty3 2142 1936 2 APPS_ORD 1181.07 7.03 7.03 4.02 90.98 0 288
WINDOW (SORT) 07000003D2B03F90 7 AUTO 8z5s5wdy94ty3 2091 1936 2 APPS_ORD 1181.06 7.03 7.03 4.5 90.98 0 288
WINDOW (SORT) 07000003D2B03F90 7 AUTO 8z5s5wdy94ty3 1921 1936 2 APPS_ORD 1181.09 13.59 13.59 2.24 90.98 1 320
WINDOW (SORT) 07000003D2B03F90 7 AUTO 8z5s5wdy94ty3 2138 1936 2 APPS_ORD 1181.16 7.03 7.03 1.34 90.98 0 288
WINDOW (SORT) 07000003D2B03F90 7 AUTO 8z5s5wdy94ty3 1754 1936 2 APPS_ORD 1181.09 14.06 14.06 5.77 90.98 1 320
WINDOW (SORT) 07000003D2B03F90 7 AUTO 8z5s5wdy94ty3 2122 1936 2 APPS_ORD 1181.15 6.56 6.56 .24 90.98 0 288
WINDOW (SORT) 07000003D2B03F90 7 AUTO 8z5s5wdy94ty3 1902 1936 2 APPS_ORD 1181.12 14.06 14.06 9.12 90.98 1 320
HASH-JOIN 07000003D2B03F28 8 AUTO 8z5s5wdy94ty3 2142 1936 2 APPS_ORD 1183.24 98.64 98.64 100.44 100.44 0
HASH-JOIN 07000003D2B03F28 8 AUTO 8z5s5wdy94ty3 2138 1936 2 APPS_ORD 1183.24 98.64 98.64 100.44 100.44 0
HASH-JOIN 07000003D2B03F28 8 AUTO 8z5s5wdy94ty3 2122 1936 2 APPS_ORD 1183.24 98.64 98.64 100.44 100.44 0
HASH-JOIN 07000003D2B03F28 8 AUTO 8z5s5wdy94ty3 2091 1936 2 APPS_ORD 1183.24 98.64 98.64 100.44 100.44 0
HASH-JOIN 07000003D2B03F28 8 AUTO 8z5s5wdy94ty3 1921 1936 2 APPS_ORD 1183.24 98.64 98.64 100.44 100.44 0
HASH-JOIN 07000003D2B03F28 8 AUTO 8z5s5wdy94ty3 1902 1936 2 APPS_ORD 1183.24 98.64 98.64 100.44 100.44 0
HASH-JOIN 07000003D2B03F28 8 AUTO 8z5s5wdy94ty3 2146 1936 2 APPS_ORD 1183.24 98.64 98.64 100.44 100.44 0
HASH-JOIN 07000003D2B03F28 8 AUTO 8z5s5wdy94ty3 1754 1936 2 APPS_ORD 1183.24 98.64 98.64 100.44 100.44 0
sum 872.07 838.21
PGA Stats – taken 5-10 minutes later than above.
select name, decode(unit,'bytes',round(value/1048576,2)||' MB', value) value from v$pgastat
NAME VALUE
aggregate PGA target parameter 11264 MB
aggregate PGA auto target 9554.7 MB
global memory bound 1024 MB
total PGA inuse 902.21 MB
total PGA allocated 3449.64 MB
maximum PGA allocated 29155.44 MB
total freeable PGA memory 2140.56 MB
process count 107
max processes count 379
PGA memory freed back to OS 77240169.56 MB
total PGA used for auto workareas 254.14 MB
maximum PGA used for auto workareas 22797.02 MB
total PGA used for manual workareas 0 MB
maximum PGA used for manual workareas 16.41 MB
over allocation count 0
bytes processed 323796668.77 MB
extra bytes read/written 183362312.02 MB
cache hit percentage 63.84
recompute count (total) 2054320
SELECT
PGA_TARGET_FOR_ESTIMATE/1048576 ESTMTD_PGA_MB,
PGA_TARGET_FACTOR PGA_TGT_FCTR,
ADVICE_STATUS ADV_STS,
BYTES_PROCESSED/1048576 ESTMTD_MB_PRCD,
ESTD_EXTRA_BYTES_RW/1048576 ESTMTD_XTRA_MB,
ESTD_PGA_CACHE_HIT_PERCENTAGE ESTMTD_CHIT_PCT,
ESTD_OVERALLOC_COUNT O_ALOC_CNT
FROM V$PGA_TARGET_ADVICE
ESTMTD_PGA_MB PGA_TGT_FCTR ADV ESTMTD_MB_PRCD ESTMTD_XTRA_MB ESTMTD_CHIT_PCT O_ALOC_CNT
1,408 .125 ON 362,905,053 774,927,577 32 19973
2,816 .25 ON 362,905,053 571,453,995 39 709
5,632 .5 ON 362,905,053 249,201,001 59 5
8,448 .75 ON 362,905,053 216,717,381 63 0
11,264 1 ON 362,905,053 158,762,256 70 0
13,517 1.2 ON 362,905,053 153,025,642 70 0
15,770 1.4 ON 362,905,053 153,022,337 70 0
18,022 1.6 ON 362,905,053 153,022,337 70 0
20,275 1.8 ON 362,905,053 153,022,337 70 0
22,528 2 ON 362,905,053 153,022,337 70 0
33,792 3 ON 362,905,053 153,022,337 70 0
45,056 4 ON 362,905,053 153,022,337 70 0
67,584 6 ON 362,905,053 153,022,337 70 0
90,112 8 ON 362,905,053 153,022,337 70 0 -
recently when opening a new URL the browser puts the new window in a partially visible window on the left of the original window. The partial window is not wanted.
I want all windows to open in their own space/tab or a new window.
What must I change to fix this?When i start the first browser, it's all fine, but while the first window is open, any other new window i open looks like the image below, the bookmark toolbar is not there,(even if it's clicked on) to get it back, i have to view, unselec bookmark, then view again, select toolbar.. i also get 2 close red box "x" the inner one is useless, and does nothing. and i also get a firefox orange box to left corner.. very annoying.. Any one else getting this problem? I have uninstall and reinstall firefox 5 3 times all ready.. i have also uninstall without saving preferences... getting annoyed.. any one? annyone?
-
Allowing evenly spaced double windows on one screen for quikc referencing?
Hi,
I can’t believe I am asking this but on Windows if you drag the window to the far right or far left it reduces the viewed window to have the screen allowing you to do the same but on the opposite side. This is really good when I am studying and need to keep looking for info on the two separate windows. It saves me from forever having to click on the window I want to view and then click back. Is there an Apple script or something that does the same so I can have the same functionality in my MacBook Pro?
Thanks
MattI got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42) -
Flash player show movies in double window
All,
I have a problem with my flash player. For some reason it plays an online movie 2 times in the same window above each other divided by a green bar.
To make this more graphic, I made a screenshot:
Anyone an idea why this is happening and how I can fix this?
Thanks in advance!
I have this problem in both Firefox and IE.Hi, glad that worked for you!! I've thot of changing my screen name, but everyone would think I'm a new helper, LOL
Thanks for marking your thread as answered
Regards,
eidnolb -
Start transaction shows the original screen within a double window
Hi SRM-experts,
we are running the SRM5.0 in the classic scenario and are facing the following actual error. After logging on to SRM I click on a transaction (for example "Go shopping") the navigation bar and startscreen is shown again on the right sight. We also running the SRM under the Enterprise Portal and within this scenario no error occured. I checked the OSS and the parameters for the Service BBPSTART in transaction SCIF but without result. Can anybody give me a hint what can be the reason ?
Thanks
AWHi,
Solution in the foll threads:
SRM open the same page in main frame
SRM opens itself again in its own frame
BBPSTART reopening again in internal frame
BR,
Disha. -
Windows Server 2012 Essentials (not R2) - all client computers offline
The server is Windows Server 2012 Essentials (not R2). I have had this problem ever since I first installed the Windows Server 2012 Essentials server in the summer of 2013 (before R2 was released). The Windows Server 2012 Essentials server shows offline
for all Devices under Dashboard. (Allow me to add that I just installed another site with Windows Server 2012 Essentials R2, and it was a breeze - all of the computers at the second install site are online.) I have one Windows 8.1 Pro client and the rest
are Windows 7 Pro clients. The problem occurs on ALL client computers.
I have removed computers from Devices in Dashboard on the server, rebooted the server, changed the client computer to a workgroup, rebooted the client computer, and reinstalled the connector software on the client computer. Same result. I
have tried this on a Windows 7 Pro client and a Windows 8.1 Pro client with the same results.
After running the connector on a client computer and waiting for the server to update its Devices status, if I look under Devices on the server Dashboard, the Windows 8.1 client computer will say online but within 24 hours it goes offline again. The
Windows 7 client computers never show online. Both computers stay offline - they NEVER show an online status (referring to the status under Devices in Dashboard).
I should make it clear that the clients can access the server shares with no problem. File synchronization works great. The clients can ping the server and the server can ping the clients. But client backups on the server fail.
One of the most troublesome things about this problem is that it prevents the client computers from being accessed remotely using the website setup by Anywhere Access. I can login to get remote access to the shared files on the server, but
the only computer that says "online" is the server. All of the other computers are "offline".
The server and clients are only using Windows firewall. The clients all use Microsoft Security Essentials for their anti-virus.
I used a troubleshooting tool that tells me that there are problems with port 6602 on the server, but the clients are all fine with port 6602. I know port 6602 is important for using Anywhere Access but I am still trying to find out more details on that.
I have checked all of the firewall settings related to port 6602 on the server, and the firewall settings look like the standard Windows settings for this port. I used netstat to find the PID associated with the port, and I looked up the PID to find the service.
That all looked standard, too.
I have been working on this problem since the summer of 2013!! Does anyone have ANY suggestions?!!
HELP!Hi,
Just addition, please check if all necessary Windows updates are installed on those
“Offline” client computer.
When connect client computers to the Windows Server 2012 Essentials server by using the Connector software, there
will be LAUNCHPAD on the client computer. Was this LAUNCHPAD grayed out? Please check if can access Shared Folders via this LAUNCHPAD. Meanwhile, please ping the Windows Server 2012 Essentials via IP address and server name when client computers show as
Offline. Any find?
Get Connected in Windows Server Essentials
In addition, please follow the path on Server and client computer:
%programdata%\Microsoft\Windows Server\Logs. Did you check any relevant Server-side logs and
Client-side Logs if find more clues?
Windows
Server Essentials 2012/2012 R2 Log Files
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
[Forum FAQ] Introduce Backup in Windows Server 2012 R2 Essentials
Windows Server 2012 R2 Essentials provides reliable ways to perform regular backups of your server and backups of your network computers.
1. Server Backup
Description:
Backs up your server running Windows Server Essentials. The data is backed up to an external USB drive. You can also perform full system restore of server.
Operations:
On Dashboard, please select DEVICES and then navigate to the server which you need to backup. Right click the server and select Set up backup. When set up complete, you will be able to
Start a backup for the server. (Figure 1)
Figure 1
More information:
Manage server backup in Windows Server Essentials
Restore or repair your server running Windows Server Essentials3. Microsoft Azure Backup
Descriptions:
Performs an online backup of files or folders on your server. When you use Azure Backup to back up server data, the information is encrypted by using your passphrase before it is uploaded to a secure datacenter on the Internet.
Operations:
1) Open Dashboard and follow the path: HOME-> Get Started-> ADD-INS-> Integrate with Windows Azure Backup. Then as Figure 3 shows, you need to “Click to sign up for Windows Azure Backup” and “Click to download Windows Azure
Backup integration module”.
Figure 3
Please note: when you click to download, you may encounter the issue as Figure 4 shows. If so, please follow the path:
Tools-> Internet Options-> Security->
Trusted sites-> Add this website to the zone and add
http://downlaod.microsoft.com,
https://activedirectory.windowsazure.com in Trusted sites in IE. (Please uncheck
Require server verification (https:) for all sites in this zone). Then please check if you can download as normal.
Figure 4
2) After you download the OnlineBackupAddin, please run it. Then begin to install the add-in. (if any issue occurs in your installation of add-in, please navigate to C:\PrgramData\Microsoft\Windows Server\Logs folder and check
InstallAddin log file if you can find some clues.)
3) During your installation, KB 2873390 may be required. Please download the update package and run it. Then Windows Azure Backup Agent Upgrade Wizard appeared. Please follow it and complete as Figure 5
and Figure 6 show.
Figure 5
Figure 6
4) Then please re-open Dashboard, you will find ONLINE BACKUP option. (Figure 7) There will be three steps that you need to do: (i)
Upload a certificate. (ii) Register your server.
(iii) Configure backup settings.
Figure 7
(i). Upload a certificate. (In this example, we use the second option: Upload certificate to Windows Azure Backup vault)
Please logon Windows Azure, select RECOVERY SERVICES and click
NEW. Follow the path: RECOVERY SERVICES-> BACKUP VAULT->
QUICK CREATE. Please type NAME and select
REGION, then click CREATE VAULT. When create completes, please click the name of this new recovery service that you create. As Figure 8 shows. Then select Manage Certificate to add or update the certificate file (.cer) that contains
a public key for the vault. The certificate is used to register servers with the vault.
Figure 8
(ii). Register your server
On Dashboard, navigate to Online Backup and click Register. (Figure 9)
Figure 9
Then it will check the certificate. And then you need to set a passphrase to secure your data. (Figure 10)
Figure 10
When you set passphrase complete, please click Next to continue. When register successfully. You will see Figure 11.
Figure 11
(iii). Configure backup settings
When register completes, please click Configure Online Backup. Then you can follow the Configure Online Backup wizard to configure online backup (add folders), specify the backup schedule, specify the backup retention policy and choose bandwidth usage. The
all process will be shown in Figure 12-16.
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
After all configurations complete, you will be able to see that the server integrates with Windows Azure Backup. (Figure 17)
Figure 17
On the Dashboard in server essentials, you will be able to start backup online. (Figure 18)
Figure 18
After backup online, you will see the protected data as Figure 19 and Figure 20 show in Dashboard and Windows Azure.
Figure 19
Figure 20
More information:
Manage Online Backup in Windows Server Essentials -
Dashboard causing system freeze
I have just upgraded from a G5 iMac to an Intec iMac - I find that when I select dashboard the windows come "in" to about halfway and then the system freezes and a cold restart is necessary (never happened on the G5 with the same widgets). This doesn't happen every time but much too often - I guess I have a rogue widget, how do I determine which one? - John.
John Ross4 wrote:
Mihalis, Is there any way I can determine which are Universal and which are not? - John.
The following shows a way to determine if a Widget is Universal.
iStat pro.wdgt/iStatPro.bundle/Contents/MacOS $ file iStatPro
iStatPro: Mach-O fat file with 2 architectures
iStatPro (for architecture ppc): Mach-O bundle ppc
iStatPro (for architecture i386): Mach-O bundle i386
But, the first first you should do is determine which Widgets are causing you the problems. Unistall them all and install them one by one until you find the problematic ones.
Mihalis.
Maybe you are looking for
-
How to Order more than One Book
Hello Apple Team I have built 3 different books in Iphoto. I have not ordered any of them yet because I was under the impression that ordering all 3 at one time would make me eligible for free shipping. However, I cannot figure out how to place an or
-
Hey, since I updated my iPhone 3G to 2.1 I cant write the apple symbol anymore. Before I updated it, I just typed "appuru" in the japanese keyboard and the apple symbol appeared. Now it doesnt work anymore, how can I get the symbol back? Thanks in ad
-
How to unlock my iphone if i forgot my password
i really need help
-
i get this error whenever i open pages created in CS4. ive tried deleting the cache file... deleting the entire configuration folder and letting DW re build it.. nothing... error still there. how can i turn it off? i also cant seem to find the "edit
-
Macbook Pro - Serial Number question
I have a Macbook Pro (week 17) that I picked up the beginning of June. It does not have the glossy screen. I registered my MBP and my AppleCare. When I put my serial number into the field on the support site about how much longer my warranty will las