Dashboard ERROR

Hello
Help please.
Since upgrading to Mac Os Lion 10.7.3 and 10.7.4 then on, constantly flying one and the same error in the dashboard:
05.06.12 21:44:01,141 DashboardClient: error [1001] setting colorSpace to iMac colorspace
05.06.12 21:44:01,141 com.apple.Dock.agent: 2012-06-05 21:44:01.140 DashboardClient [169:403] error [1001] setting colorSpace to iMac colorspace
05.06.12 21:44:01,168 DashboardClient: error [1001] setting colorSpace to iMac colorspace
05.06.12 21:44:01,168 com.apple.Dock.agent: 2012-06-05 21:44:01.168 DashboardClient [169:403] error [1001] setting colorSpace to iMac colorspace
05.06.12 21:44:01,203 DashboardClient: error [1001] setting colorSpace to iMac colorspace
05.06.12 21:44:01,203 com.apple.Dock.agent: 2012-06-05 21:44:01.203 DashboardClient [169:403] error [1001] setting colorSpace to iMac colorspace
05.06.12 21:44:01,750 DashboardClient: error [1001] setting colorSpace to iMac colorspace
05.06.12 21:44:01,750 com.apple.Dock.agent: 2012-06-05 21:44:01.749 DashboardClient [169:403] error [1001] setting colorSpace to iMac colorspace

Yes, I've same error for my Dell U2412M connected via display port cable.
It appears together with log entries like ...
com.apple.launchd.peruser.x: (com.apple.Dock.agent[x]) Job appears to have crashed: Abort trap: 6
com.apple.Dock.agent: terminate called throwing an exception
com.apple.Dock.agent: DashboardClient[x] Couldn't get window modality: error=-5600
com.apple.Dock.agent: DashboardClient[x] A Carbon window's features couldn't be gotten.
Im using 10.7.5
I just recognized a strange behavior like this:
Listing to iTunes 10.7 Playlist and putting FF 18 window to dock. When song in iTunes changed, FF18 window pops up ?!?!

Similar Messages

Workspace customized dashboards: Error in the operation

Hello
i'm trying to figure out more about what can be done with the workspace dashboards and while i try to configure new graphics, after aplying the changes i sometimes see a popup:
"Error:
Error in the operation"
(or something like that, the software is installed in portuguese). This is all the popup message says.
This mesage also occurs when, from a graphic in one of the pannels, i try to communicate with a process list. I have the communication configured, but when i click in one area of the graphic pie it returns this very same error instead of drilling down the process on the list for me.
Where can i find more detailed information about the real error?
Thank you in advance.
Edited by: user1997568 on 21/10/2010 09:42

Download the patch from Oracle support..

Oracle BPM 10gR3 Dashboards - Error in loading data

We have an issue with oracle bpm 10g dashboards. Chart component in the presentation displays "Error in loading data". There is no exception, the attached method returns valid x,y co-ordinates.If we enable 'user refresh" property of the chart component and click on refresh in the presention, it displays the chart. Any change in the presentation(change a drop down a value, etc) sets it again as "Error in loading data" and click on refresh brings back the chart.
Adding this.refreshGraphicImage(graphicId : "chart") in the code to refresh the chart also din't help.
please let me know if anybody has faced similar issue.
Thanks,
Gopi

You have to set "fuego.workspace.execution.ajax.enabled" property to FALSE in the workspace.properties, that is located in ...\webapps\workspace\WEB-INF
Hope it helps!

Dashboard error in Query as Web Service from WEBI

I have created a WEBI and published it as QAAWS.When i right click and test it with my know parameters and it is working fine. Then i have called it in my Dashboard application.I linked the desired input prompts and output fields in Dashboard.When i run this Dashboard i am getting an error.(It is attached here).
I have searched many days to solve this but failed .this is my last try.Please help me to get rid of this issue.
thanks in advance,
aby

Hello Nisha,
as you refer to a Webi problem I recommend to post this query to the [BusinessObjects Web Intelligence|SAP BusinessObjects Web Intelligence; forum.
This forum is dedicated to topics related to the creation and design of Web Intelligence documents using the Web Intelligence Report Panels. This includes areas such as universe connectivity, prompts, charting, formatting, filters, and formulas.
It is monitored by qualified technicians and you will get a faster response there.
Also, all Webi queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

B1ic Dashboard Error (500 - Internal Server Error)

Hi all experts,
I was using 9.0 PL 05 and after upgrade to 9.1 PL05 I have got an error message when opening the dashboard: SAP B1iP detected an error:
Emitted HTTP-Code
500 - Internal Server Error
Internal reason
Did not supply an appropriate user-ID integer (Param6)
The integration services is running fine and connected I already checked the connectivity of B1DI and JDBC in SLD and both of them are ok.
May anyone help to tickle this?? Thanks
Thanks
ankush

Dear Ankush,
when copying content you'd better give the full context and also the original source:
SAP note 1619422 - B1ic_Troubleshooting Guide for B1ic Dashboard/Cockpit which also helps others in similar situations.
best, peter

Getting Dashboard Error

Dear Sir,
I used SAP Addon that is "Dashboard Packaging Wizard".
When i select my own Dashboard then i getting the error like.
The requested dashboard does not exist.
Dashboard:/com.sap.b1.dashboards/0010000106.XXX_Top_10_BPs.DAS0001/default.html
If this dashboard is newly imported, ensure that the SAP Business One EventSender Service
has been started; then wait for several minutes and try again.
here i attached screenshoot also.
i wait for your warm replay
Thanks & Regards,
Nishit Makadia

Hi,
Please refer SAP note for solution 4.2:
1619422 - B1ic_Troubleshooting Guide for B1ic Dashboard/Cockpit
Thanks & Regards,
Nagarajan

OBIEE Dashboard Error

Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Syntax error in input MDX query on line 3 at token ')' (HY000)

Hi Daan,
Thankyou for the reply. I checked the log files. The elapsed time for the queries are high for this user.
its taking 90 seconds for each request in dashboard. When I checked for other users this request just took 10 seconds
Same user logs in from different location on different client machine every 15 minutes and checks if the dashboards are coming up and logs outs. The process is written and executed as script in load runner. So for user1 at one location
when sqll request is sent it hits cache in one second but the time taken to get request completed is long ,when I checked log files. user1 request cache hit query is processed at same time same user from different location requests for same reports it causing delay.
Please let me know would the delay be due to same user requestint same report from different location that issue is occuring?
we didnt see this pattern for multiple users login at same time.
Thanks,
Swetha

SAP 4.1 SP2 - Dashboards Error in Query Browser

Hello Experts,
I am using SAP Business Objects 4.1 SP2. I am getting attached error while trying to access Universe/Bex query through Query Browser. Please see below the exact steps that I am following -
1. Open SAP Dashboards. Select Query Browser option.
2. Select Bex/Universe any one of the option.
3. Select Cube/Universe based on the selected option.
4. It throws below error.
Please note, I have already tried following without any luck -
Redeploying dswsbobje application and restarting TOMCAT.
Increasing APS memory.
Please help.
Regards,
Abhijit

Please make sure all the services required services are running.. mainly see if the DSL bridge service is working fine..
The BICS or Universe selection would not work if DSL service has problem..

DashBoard error: 404 - not found

Dear Friends,
I was trying to Set up the Dashboard in My System. Have done all the necessary steps as Instructed by SAP. Have assigned all the necessary licenses to the B1i user. Have Restarted all the required Services. But I am getting the following error:
SAP B1ip detected error:
Emitted HTTP Code:
404-not Found
Internal reasons
/com.sap.b1.dashboard/001sap0001.SAP_DASHBOARD_001.DAB001/default.html
I am using Windows7: Sql 2005: SBO 8.8 PL13.
But I have not Installed xcelsius..is it necessary to Installed it..?? PLS advice...!!
Experts pls help need to config the System ASAP.
Regards,
Aravind Kumar. S

Hi Aravind,
may you have Win7 in a 64Bit Version ?
If so, and IF you correctly installed
- the 32Bit JDK 5.0.22
- AND the 64Bit JDK 5.0.22,
- AND you have given the B1i user a password
- AND you have minimum CONNECTED once with the B1i user to SBO
- AND you have choosen the _64Bit_ installer from the installaltion directory \Technology\x64\setup.exe
- AND all your test connections will working fine (in the landscape section of the B1i configurator)
... than there is still one source of trouble!
During the installation procedure, you will be asked, to link to the 64Bit and the 32Bit installation path of the JDK.
The problem is, that the preselected path of the 64Bit JDK is pointed on the 32Bit path.
In an 32 Bit environment, the default program-installation path is C:\Program Files\
In an 64 Bit environment, the default program-installation path C:\Program Files\ is only for 64Bit
and the default program-installation path for 32Bit programs is changed to \Program Files (x86)
In the above mentioned screen (where you select the 64Bit and 32Bit JDK) both default-paths are pointing on the 32Bit path
C:\Program Files (x86) \ JAVA
correct it must be for 64Bit without (x86)
C:\Program Files\Java\jdk1.5.0_22
and for the 32Bit
C:\Program Files (x86) \Java\jdk1.5.0_22
It is very easy to ignore this wrong preselection!!
You can`t change this after Installation and I`m not sure if you can test/proof what was defined.
So the easiest way is to DE- and RE-install the whole B1i again - that only takes 10 minutes.
Hope that helps to solve your problem.
regards from Hamburg
Heiko

Sbconsole dashboard error - Console Exception

Hi all, I just installed oracle service bus on fedora 11 platform. It successfully installed and run well in functional. But in dashboard there is an exception
that made the tab provided cannot be viewed.
Console Exception :
Message com/bea/alsb/console/dashboard/ui/ChartUIRenderHelper
Type java.lang.NoClassDefFoundError
this is the link error above :
http://picasaweb.google.com/lh/photo/cU2E_aqGUW-29TV2ny-xQQ?feat=directlink
Really thanks in advance
Regards,
Kahlil

Can you try to open a test debug window for any of the business and proxy services?
It seems the the console app is not able to gather monitoring data. Which could be a problem with the specific application module for monitoring or may be a firewall issue. If you are able to open the test console window properly then it most probably is an issue with the monitoring module.

OIM Installation - Diagnostic Dashboard Error

Hi,
When I ran the Oracle Prerequisites Check Test in the Diagnostic Dashboard before installing the OIM server, the test failed.
I received the following error message:
Unable to connect to the database
The root cause is...
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
However, the database instance is up. I gave the correct usernames and password. I suspect the port number is wrong. How do I check what the correct port number is?
I'm currently running Oracle Application Server and have Oracle Database.
Thanks,
Venk

Have you tested the connection with a tool like sqldeveloper ?
take same time and check the servername / SID and user credentials again.

Bpo dashboard error

Dear folks,
I´m facing a problem with the phase 5 of solution manager basic configuration, it´s complaining about the BPO Dashboard Setup returning the following error:
Job ccms_bi_setup not yet executed. Perform activity Set Up BW
can someone has any idea of the solution?
Best regards,
Nelson Chamba\

HI Nelson,
Please check note 1969405 - Error "Job ccms_bi_setup not yet executed. Perform activity Set Up BW"
BR,
K.

Dashboard error u2013 u201CThere is no AA Analytics Server available. Contact your

Hi,
We are using BO XI R3.1 version, and we never used the dash board here . Now when we are trying to access dashboard in Infoview its giving error as u2013
There is no AA Analytics Server available. Contact your Business administrator to verify status. AA2213
Even when we are trying to see settings Dashboard and Analytics setting same message appears.
We tried dashboard related server restart and also all server restart, but still problem exists.
Please advice.

Hi,
We have servers named Dashboard Analytics Server and Dashboard Server related to dashboard. Both are up and running.
All other servres under Performance management are up and running.
We donot find AA Analytics server in server list, is this any specific server?

Dashboard: Error by copying data source

Hi Experts
I have a DB in design studio - I have created a data source.
When I try to copy the DS with copy and paste I get this error:
Analysis Application
Error in triggering the event "apps.state_changed"
While processing the current request, an exception occurred which could not be handled by the application or the framework.
Log ID:
add1e1ac-d7f3-4eb3-8700-cfc0b1a66b3e
Failed to process request. Please contact your system administrator.
To facilitate analysis of the problem, keep a copy of this error page.
We are sorry for the inconvenience.
Can you help me with that please?
thanks and regards
Manu

Would you please advise which version you are using?
I've seen this error with Design Studio 1.1
But I just tried copying and pasting a data source in Design Studio 1.2 - no errors on my side

Dashboard Error in OBIEE 11 g

Hi ALl.
I am getting this error when i was viewing the report in OBIEE 10 g i able to see the report but in OBIEE 11 g the same i am getting below error Please help me to solve this issue.
Logic Error: PreKnownMetadataTable was accessed before result table was set.
Error Codes: :OI2DL65P
Location: saw.hypercube.dxeApi, saw.querycache.executeQuery, saw.threadpool, saw.threadpool, saw.threads
SQL Issued: 22219~tvdh0ne4jg0rl1m58n009gg75i
Kind Regards,
Mohan

check something similar about metadata
http://obiee100.blogspot.in/2011_07_04_archive.html
http://oraclebisolutions.blogspot.in/2013/01/error-codes-opr4onwyu9im8tacoi2dl65p.html
mark answered if it helps.
thanks
Edited by: user2534719 on Jan 30, 2013 6:56 PM

Dashboard ERROR

Similar Messages

Maybe you are looking for