Dashboard for InfoView. Remove "Main Report" Tab from Crystal Report
When defining a Dashboard for InfoView I would like to be able to display a chart contained in a report without it being in any container. I can remove everything except the Tab Control showing "Main Report". If this cannot be removed then I would like to change "Main Report" to the title of my chart.
Any suggestions would be appreciated.
When adding a report onto a Dashboard, there should be the option to display it in Full mode, Compact mode, or Report Part mode.
Try right-clicking on the Report Part in your report and and see if it gives you the option to select just the chart. I know this option is available in Web Intelligence, but am not certain is Crystal Reports offer the same functionality.
If you've already selected the Report Part and just have formatting issues, then it should be done on the Crystal Report itself. Make sure that only the chart is included in the part, like Jacquez says.
Similar Messages
-
InfoView not defaulting print settings from Crystal Reports XI
I have a form/report created from Crystal Reports XI published to InfoView that has the print settings set for the manual tray when printed. When running the report in InfoView, it does not default to the manual tray when printing. I am publishing directly from Crystal Reports. I have the Process/Print Setup 'Set layout to: Report file default' and the Schedule/Format 'Use options saved with report' checkbox checked. I am not finding any other settings to tell InfoView to use the report page layout/printer settings. Anyone know of any other options I should check? Thanks!
Edited by: Kelley Freelove on Oct 22, 2009 3:09 PMThat would be the correct forum as this one is for SDK issues only.
If you are not getting helped on the other BO forum you may want to consider creating a case if you have a valid support contract.
Jason -
Upgrading the report version from Crystal Reports 10 to Crystal Reports 11 without REDESIGN
Post Author: Chakradhar
CA Forum: Upgrade to XI 3.0
HI All, Please provide a solution for this.. Is there any way to upgrade the version of a report without redesigning the report? If we upgrade the report without redesign, dont we lose the special features of the new version? Actually i want to the change the report version from Crystal Reports 10 to Crystal Reports 11. Thanks..Post Author: rodneyaz
CA Forum: .NET
I'm having the same issue. Worked fine for me in XI, but stopped working when I upgraded XI to XI R2.
Please post a follow-up if you get this resolved! Thanks!
RodneyAZ -
Upgrading to Crystal Reports 2011 from Crystal Reports XI
Hi,
I hope someone can provide some assistance. I am a current user of Crystal Reports XI and am upgrading my notebook to Windows 7 so therefore need to upgrade my version of Crystal.
I have downloaded a trail of CR2011 and installed. I am wanting to purchase the new version but what to know if I am able to purchase the Upgrade or need to purchase the Full Version ?
Which ever way I go, can I simply relicence the version I have installed or do I need to uninstall and re-install ?
It is being installed on the same notebook although the HDD has been replaced.
I look forward to your assistance.
Thanks,
ShaunThis is more of a sales query than support. Please call sales for aswers to your questions:
866-681-3435
- Ludek -
Post Author: Sriramkusumanchi
CA Forum: Crystal Reports
Hi All,
We are using BO XI R2 version.
1. Under this version, the BO Enterprise product consists of Crystal Reports Explorer feature through which we can develop the crystal reports.
2. And under the same version, the Crystal Reports XI R2 product consists of Crystal Reports feature through which we can develop crystal reports.
I want to know, wheher there is any difference in the features for developing crystal reports through point 1 and point 2. If yes, then which product is the better option to go for Crystal reports development. (please note: I want the all the scheduling, automatic printing, printing on pre printed forms, etc features to be supported)
Please help us to solve this confusion ASAP.Hi Nancy,
The server info still needs to be updated. Are you setting location for each subreport also?
Possibly this registry key will help, I only have CR 2008 installed so you'll have adjust for what ever you are using:
HKEY_CURRENT_USER\Software\Business Objects\Suite 12.0\Crystal Reports\DatabaseOptions - VerifyStoredProceduresOnFirstRefresh = No
and
VerifyStoredProceduresOnSetLocation = No
And
VerifyWhenDBDriverUpgraded = No
And
ViewOutOfPlaceSubreports = No
Close CR designer before making any changes. And the usual warning about modifying the registry.
Thank you
Don -
CR2008 Not enough memory while exporting reports from Crystal Reports 2008
I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
Server details:
OS: Windows 2003 Enterprise Edition R2 with SP2
IIS: IIS 6
.Net Framework: 3.5
Application details:
Hosted application using Crystal Reports 2008 SP 3
Crystal Reports Viewer version: 12.0.2000.0
The data binding of the report object is done through an ADODB dataset.
Web.Config:
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<configSections>
<sectionGroup name="businessObjects">
<sectionGroup name="crystalReports">
<section name="printControl" type="System.Configuration.NameValueSectionHandler" />
<section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
</sectionGroup>
</sectionGroup>
</configSections>
<businessObjects>
<crystalReports>
<printControl>
<add key="url" value="http://myserver/mysite/PrintControl.cab" />
</printControl>
<crystalReportViewer>
<add key="documentView" value="weblayout" />
</crystalReportViewer>
</crystalReports>
</businessObjects>
<appSettings>
<add key="CrystalImageCleaner-AutoStart" value="true" />
<add key="CrystalImageCleaner-Sleep" value="60000" />
<add key="CrystalImageCleaner-Age" value="120000" />
</appSettings>
<system.web>
<httpHandlers>
<add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
</httpHandlers>
<compilation debug="false">
<assemblies>
<add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
</assemblies>
</system.web>
<system.webServer>
<handlers>
<add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
</handlers>
</system.webServer>
</configuration>
Sample Code:
Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
Report.Load(Server.MapPath(strReportPath));
Report.SetDataSource(dsReport);
Creportviewer.ReportSource = Report;
For exporting the report to PDF
string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
Clean Up Code: (Page_UnLoad event)
if (Report != null)
Report.Close();
Report.Dispose();
Creportviewer.ReportSource = null;
Creportviewer.Dispose();
dsReport = null;
GC.Collect();
GC.WaitForPendingFinalizers();
Can someone help me resolve the issue.The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM -
Want to remove Technical data Tab from Work Center
Hi All,
I want to remove Technical data Tab from Work Center. I have Removed ''Technical data'' Tab from Plant Maintenance and Customer Service-->Master Data in Plant Maintenance and Customer Service -->Maintenance Plans, Work Centers, Task Lists and PRTs >Work Centers>Configure Screen Sequence for Work Center.
Still I am able to see Technical Data Tab in IR01, Work center.
Is there any other config to remove the same?This is resolved.
I have changed the config in following node as 0005 for PM
SPRO / IMG -> Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Maintenance Plans, Work Centers, Task Lists and PRTs -> Work Centers->General Data->Define Work Center Types and Link to Task List Application -
Problem calling XML Report Publisher from Oracle Reports
Hi,
I'm facing a problem in calling XML Report Publisher from Oracle Reports.
Basically, I'm trying to customise Dunning Letter program. The program which is submitted calls another program. I have customised the second program and added a call to a stored procedure which in turn calls XML Report Publisher.I have created a template and attached it to the second program as well.
The procedure code is as follows.
v_request_id := FND_REQUEST.SUBMIT_REQUEST(application => 'AR'
,program => 'ARDLP_NON_SRS'
,description => 'Dunning Letter Print from Dunning Letter Generate'
,sub_request => FALSE
l_status := fnd_concurrent.WAIT_FOR_REQUEST
( REQUEST_ID => v_request_id,
INTERVAL => 15,
MAX_WAIT => 180,
PHASE => l_phase,
STATUS => l_status_code,
DEV_PHASE => l_dev_phase,
DEV_STATUS => l_dev_status,
MESSAGE => l_message );
v_xml_req_id := FND_REQUEST.submit_request(application => 'XDO',
program => 'XDOREPPB',
argument1 => v_request_id,
argument2 => 'FLS DE AR Dunning Letter Print - German',
argument3 => 603, -- changed 665 -- was 551,
argument4 => NULL,
argument5 => 'N',
argument6 => 'RTF',
argument7 => 'PDF');
Now, there are two problems I'm facing...
1. when the second program('Dunning Letter Print from Dunning Letter Generate') gets called it executes this procedure ... logically the 'Dunning Letter Print from Dunning Letter Generate' should get called twice ... second time from the procedure. Its getting called multiple times .. as many as 15 - 20 times.
2. The Xml Report Publisher program ultimately gets called but its erroring out with the following error:
java.sql.SQLException: No corresponding LOB data found :SELECT L.FILE_DATA FILE_DATA, DBMS_LOB.GETLENGTH(L.FILE_DATA) FILE_LENGTH, L.LANGUAGE LANGUAGE, L.TERRITORY TERRITORY, B.DEFAULT_LANGUAGE DEFAULT_LANGUAGE, B.DEFAULT_TERRITORY DEFAULT_TERRITORY,B.TEMPLATE_TYPE_CODE TEMPLATE_TYPE_CODE, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.START_DATE START_DATE, B.END_DATE END_DATE, B.TEMPLATE_STATUS TEMPLATE_STATUS, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.DS_APP_SHORT_NAME DS_APP_SHORT_NAME, B.DATA_SOURCE_CODE DATA_SOURCE_CODE, L.LOB_TYPE LOB_TYPE FROM XDO_LOBS L, XDO_TEMPLATES_B B WHERE (L.LOB_TYPE = 'TEMPLATE' OR L.LOB_TYPE = 'MLS_TEMPLATE') AND L.APPLICATION_SHORT_NAME= :1 AND L.LOB_CODE = :2 AND L.APPLICATION_SHORT_NAME = B.APPLICATION_SHORT_NAME AND L.LOB_CODE = B.TEMPLATE_CODE AND ( (L.LANGUAGE = :3 AND L.TERRITORY = :4 ) OR (L.LANGUAGE = :5 AND L.TERRITORY = :6) OR (L.LANGUAGE= B.DEFAULT_LANGUAGE AND L.TERRITORY= B.DEFAULT_TERRITORY ) )
I have checked from database that the XDO_LOBS/ XDO_TEMPLATES_B table has corresponding registration data.
I don't know what's creating the problem.
If anyone has customised the Dunning Letter program before or having any idea about this problem, please help me out ..
Thankssatrajit,
Now I am getting the same error you got, Can you please tell me the solution you found?.
XML Report Publisher 5.0
Updating request description
Waiting for XML request
Retrieving XML request information
Preparing parameters
Process template
--XDOException
java.sql.SQLException: No corresponding LOB data found :SELECT L.FILE_DATA FILE_DATA, DBMS_LOB.GETLENGTH(L.FILE_DATA) FILE_LENGTH, L.LANGUAGE LANGUAGE, L.TERRITORY TERRITORY, B.DEFAULT_LANGUAGE DEFAULT_LANGUAGE, B.DEFAULT_TERRITORY DEFAULT_TERRITORY,B.TEMPLATE_TYPE_CODE TEMPLATE_TYPE_CODE, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.START_DATE START_DATE, B.END_DATE END_DATE, B.TEMPLATE_STATUS TEMPLATE_STATUS, B.USE_ALIAS_TABLE USE_ALIAS_TABLE FROM XDO_LOBS L, XDO_TEMPLATES_B B WHERE L.LOB_TYPE = :1 AND L.APPLICATION_SHORT_NAME= :2 AND L.LOB_CODE = :3 AND L.APPLICATION_SHORT_NAME = B.APPLICATION_SHORT_NAME AND L.LOB_CODE = B.TEMPLATE_CODE AND ( (L.LANGUAGE = :4 AND L.TERRITORY = :5 ) OR (L.LANGUAGE = :6 AND L.TERRITORY = :7) OR (L.LANGUAGE= B.DEFAULT_LANGUAGE AND L.TERRITORY= B.DEFAULT_TERRITORY ) )
at oracle.apps.xdo.oa.schema.server.TemplateInputStream.initStream(TemplateInputStream.java:309)
at oracle.apps.xdo.oa.schema.server.TemplateInputStream.<init>(TemplateInputStream.java:187)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.getTemplateFile(TemplateHelper.java:776)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:1269)
at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:807)
at oracle.apps.fnd.cp.request.Run.main(Run.java:148) -
Passing single/multiple values to stored proc parameter from crystal report
I tried below solution posted on this forum to pass either a single value or multi-value to a sql server stored procedure parameter (varchar datatype) from crystal report XI R2.
In my crystal report , I am displaying all the available parameter values to the user and the user will select either a single value or multi value.
This worked when I select single value and when I say show sql query in my subreport I see the following:
{CALL "XYZ"."dbo"."storedprocedurename";1('Product 1')}
But this did not worked when I selected multiple values and when I say show sql query in my subreport I see the following:
{CALL "XYZ"."dbo"."storedprocedurename";1('Product 1,Product 2')}
I think it might work if it is as below:*
For multiple values:
{CALL "xyz"."dbo"."storedprocedurename";1('Product 1', 'Product 2')}
Please advise.
Solution Posted on this forum is as follows:
Hi,
As you must be aware of that a crystal report created of a stored procedure will allow only a single value for inserting a multiple value as a parameter in your report and pass those values to your stored procedure please follow the below work around which will be helpful for you.
Symptom
In Crystal Reports, you want to pass a multi-value parameter to a stored procedure. The problem with doing so is that Crystal Reports considers the multi-value parameter to be an array.
How can you pass a multi-value parameter to a stored procedure?
Resolution
Here are the steps to pass a multi-value parameter to a stored procedure:
1. Create a Crystal report, and add a multi-value parameter.
2. Since the multi-value parameter is treated as an array, create a formula that uses the JOIN function. Create a formula as below:
//Formula: @JoinFormula
Join ({?Multi-value parameter array},";")
====================
NOTE:
In the formula above, a semi-colon (";") is the delimiter.
====================
3. Within the main report, create a subreport based on the stored procedure, and include the parameter to be populated with the multi-value list.
4. Link the Join formula in the main report to the stored procedure parameter in the subreport.
Doing so passes a multi-value parameter to the stored procedure.
Regards,
VinayHi Vinay,
First you need to make sure the stored procedure accepts multiple values in the fashion 'a','b','c'.
Then, create this formula in the Main Report:
numbervar i;
stringvar s;
for i:= 1 to ubound({?Parameter}) do
s := s + "'" + {?Parameter}<i> + "'" + ",";
left(s,len(s)-1);
Link this formula to the sub-report's parameter.
Hope this helps!
-Abhilash -
Error With Export/Print from Crystal Report Viewer
Hello there,
I've searched through the web and SAP discussion boards with not much luck with this issue.
After working through this for some days now I've decided to look here for help.
Environment:
I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
Problem:
When I attempt to export, I receive the prompt to select format and pages.
When I click export after selections most times I receive an error with the text
Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Other times the page simply refreshes on export.
When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
No Print or Export document is ever created.
As many print/export issues seems to be related, I'm guessing this two issues are as well.
Notes:
I am utilizing the ReportClientDocument model
I am storing this in session to use as the crystal report viewer report source on postbacks
I am assigning a subset of export formats to the crystal report viewer
I am setting particular parameters as well on the report source
At this point I would appreciate every assistance I may receive on this issue
Thanks in advance,
Below is the pertinent code
Code:
<aspx>
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
AutoDataBind="true" EnableDatabaseLogonPrompt="False"
BestFitPage="False" ReuseParameterValuesOnRefresh="True"
CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
ToolPanelView="None" PrintMode="Pdf"/>
<Codebehind>
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using CrystalDecisions.Enterprise;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.Shared;
namespace ClassicInternalReportPage
public partial class Reports : System.Web.UI.Page
protected override void OnInit(EventArgs e)
base.OnInit(e);
if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
if (reportService != null)
string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
+ "Where SI_PROGID='CrystalEnterprise.Report' "
+ "And SI_ID = {0} "
+ "And SI_INSTANCE = 0", Request.QueryString["rId"]);
InfoObjects infoObjects = infoStore.Query(queryString);
ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
if (infoObjects != null && infoObjects.Count > 0)
ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
CrystalReportViewer1.DataBind();
//Viewer options
// Don't enable prompting for Live and Custom
CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
protected void Page_Load(object sender, EventArgs e)
if (IsPostBack && CrystalReportViewer1.ReportSource == null)
CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
CrystalReportViewer1.DataBind();
private bool AssignReportParameters(ISCDReportClientDocument reportSource)
bool success = true;
if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
if (Request.QueryString["t"] == "2")
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
else if (Request.QueryString["t"] == "3")
reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
else
//Unknown report type alert
success = false;
return success;Thanks Don for your response,
I'm new to the SCN spaces and my content has been moved a couple of times already.
In response to your questions
The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
App pool is running in 32 bit mode
Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
Thank you for your patience and advice, -
Migrating from crystal report 8.5 to 10.0 giving error
migrating from crystal report 8.5 to 10.0 giving error
I am working in migrating my cr application to 10th ver from the existing 8.5 where we have to explicitly make a query in query builder and then attach it. I was using dsn in ms odbc for oracle driver to connect the DB. Now in 10.0 i have removed the query file created using 8.5 query builder and trying to write directly to command editor. the report as stand alone is working fine. but when i try to generate the pdf using my vb application then on .export option it is giving error as "Logon failed.
Details: 01S00:[Microsoft][ODBC driver for Oracle]Invalid connection string attribute". i think the problem might be with cddb_oracle.dll or crdb_oracle.dll file as i am using a evaluation version of crystal report 10. as input to dsn i am providingmigrating from crystal report 8.5 to 10.0 giving error
I am working in migrating my cr application to 10th ver from the existing 8.5 where we have to explicitly make a query in query builder and then attach it. I was using dsn in ms odbc for oracle driver to connect the DB. Now in 10.0 i have removed the query file created using 8.5 query builder and trying to write directly to command editor. the report as stand alone is working fine. but when i try to generate the pdf using my vb application then on .export option it is giving error as "Logon failed.
Details: 01S00:[Microsoft][ODBC driver for Oracle]Invalid connection string attribute". i think the problem might be with cddb_oracle.dll or crdb_oracle.dll file as i am using a evaluation version of crystal report 10. as input to dsn i am providing -
Migrating from crystal report 8.5 to 10.0 giving error 01S00:error
migrating from crystal report 8.5 to 10.0 giving error
I am working in migrating my cr application to 10th ver from the existing 8.5 where we have to explicitly make a query in query builder and then attach it. I was using dsn in ms odbc for oracle driver to connect the DB. Now in 10.0 i have removed the query file created using 8.5 query builder and trying to write directly to command editor. the report as stand alone is working fine. but when i try to generate the pdf using my vb application then on .export option it is giving error as "Logon failed.
Details: 01S00:[Microsoft][ODBC driver for Oracle]Invalid connection string attribute". i think the problem might be with cddb_oracle.dll or crdb_oracle.dll file as i am using a evaluation version of crystal report 10. as input to dsn i am providing
1.dsn
2.usid
3.database
4.password
what else is missing . plz help.....Well, you can migrate, you can not upgrade (semantics I suppose). E.g.; the RDC was deprecated in CR XI r1 and retired in CR 2008. Thus there is no way for you to upgrade to version 12 of the RDC as there is no such thing. So, from here, you have two options: migrate / port the app to .NET, or Java SDKs.
Re. RDC, see my blog here:
/people/ludek.uher/blog/2008/10/20/report-designer-component--past-present-future
For porting the app to .NET, see this article:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0eb394f-931e-2b10-3b82-9413bfc3f457
Ludek -
How can i export excel 2003(Version 11) from Crystal Report 8.5
how can i export report to excel 2003(Version 11) from Crystal Report 8.5
We i can only see below formats
Acrobat Format (PDF)
Character-separated values
Comma-separated values (CSV)
Crystal Reports (RPT)
Crystal Reports 7.0 (RPT)
Data Interchange Format (DIF)
Excel 5.0 (XLS)
Excel 5.0 (XLS) (Extended)
Excel 7.0 (XLS)
Excel 7.0 (XLS) (Extended)
Excel 8.0 (XLS)
Excel 8.0 (XLS) (Extended)
HTML 3.2
HTML 4.0 (DHTML)
Lotus 1-2-3 (WK1)
Lotus 1-2-3 (WK3)
Lotus 1-2-3 (WK5)
ODBC - AddressBook
OBDC - CRGUP
OBDC - CROR8V36
OBDC - CRSS
OBDC - CRXMLV36
ODBC - dBASE Files
ODBC - Excel Files
ODBC - MS Access Database
ODBC - Visio Database Samples
ODBC - Visual FoxPro Database
ODBC - Visual FoxPro Tables
OBDC - Xtreme Sample Database
Paginated Text
Record style (columns no spaces)
Record style (columns with spaces)
Report Definition
Rich Text (Exact Format)
Tab-separated text
Tab-separated values
Text
Word for Windows document
XML
there is no format with "Microsoft Excel 97-2000 (XLS)"
what should i do? -
How to select a procedure in package from crystal report
I want to select a oracle procedure in package from a crystal report. I can able to select stored procedure from crystal report if I check the option storedprocedure in file menu--option-SQL tab.
Thanks Jayanthi,
We had already read the article, but did not interpret it correctly. We found the solution in an SAP OSS note.
We had to use method get_document_handle to get an OLE link and continue from there with OLE. The article however is very brief on that part and has no example.
So for anyone who would like to do the same or simular:
- call method do_document->get_document_handle:
EXPORTING
no_flush = ''
IMPORTING
error = do_error
handle = do_handle
retcode = do_retcode.
- GET PROPERTY OF do_handle-obj 'Application' = do_ole_application. -
Extracting SQL Queries from Crystal Reports
I am trying to find a way or a utility to be able extract SQL queries from Crystal reports into a text file for documentation purposes. These queries are not in the repository, they were entered into each of the reports when the reports were being built and I can't find a way to extract them. Any ideas/suggestions?
Hello,
CR doesn't have the ability, and I don't recall if this has ever been asked previously. Great suggestion for the Idea Place tab in the up right corner of this page.
If you find a developer it's quite simple to get:
// log onto the server and then get the SQL.
rptClientDoc.DatabaseController.LogonEx("van-w-13-dwilli", "xtreme", "sa", "pw");
GroupPath gp = new GroupPath();
string tmp = String.Empty;
rptClientDoc.RowsetController.GetSQLStatement(gp, out tmp);
// show the SQL but easy enough to save the SQL text to a file.
MessageBox.Show(tmp, "Data Source Set and SQL Statement", MessageBoxButtons.OK, MessageBoxIcon.Information);
Of course you need to open the report first, lots of samples on how to...
Thank you
Don
Maybe you are looking for
-
Regarding the product Time Capsule... is the modem the same as the Airport extreme and is the disk drive always running??? I'm worried about it lasting at least five years.
-
Laserjet pro 400 mfp m425dn scan software
I have a LaserJet Pro 400 MFP M425dn all-in-one device. I have it connected via USB. It works as a printer. I cannot get any of the scan software to recognize that I even have a scanner. I have Windows 8.0 (junk). I have installed HP Scan and Capt
-
Reader XI doesn't save changes to any document !!!
I have a problem with adobe reader XI version 11.0.0.7 which started very lately in which I try changing settings at ctrl+k (Preferences) then just as I close the program and reopen it everything returns as it was and my document returns to page 1 wi
-
Connection cancellation error with Azure
Hello! From night to day started getting the error below when I run my application on the local machine. Publishing the application on Azure have no problems. I researched this error and in some places say it is temporary. Try again later. Others say
-
Read confirm in Outlook Express
Hi experts i'd like to know if there is a way to disable the "read confirm" in Outolook Express when a buyer recives a Questionnaire like email attachment for a Survey. The questionnaire has been sent from Enterprise Portal Application with SRM 7.0