Dashboard gets opened

after a few clicks after I open imac and no matter where I click dashboard gets opened, click again it disappears click again it appears and is opening and closing doing that many times.I have to scroll the wheel of the mouse and then click to stop doing it.Please could you help me what to do to avoid my imac doing that?

Open System Preferences Mouse pane (or +Keyboard & Mouse+ pane). If you are using a Mighty Mouse, make sure the setting for the left-side click (or perhaps the right-side click) is not set to Dashboard. The best setting is +Primary Button+ on the left side and +Secondary Button+ ("right click") on the right side. You can set the scroll ball click as desired or turn it OFF.
The side squeeze button is set to Dashboard by default (I believe), so make sure you are not squeezing the sides by mistake. You can turn that one OFF (I find it annoying).

Similar Messages

Cannot get Dashboard to open

Hello.
I'm quite new to all this so be nice. I upgraded to Lion recently and notice I now cannot for the life of me get the Dashboard to open up. I've read all sorts of advice, in particular about deleting .plist files relating to Dashboard and have followed instructions on how to find said files but they do not exist! I go to user/library/preferences and the only thing in there is BJPrinterUtility.plist. Nothing else. I've tried "showing dashboard as a space" in Mission Control preferences but this does not stay ticked when I exit preferences. So I am at a loss.
Help. Please? Can't find any other advice on it anywhere!
Many thanks....

As it turn out, this was the problem:
Disable Dashboard
Dashboard is OS X 10.4’s new “always ready” utility application. When you hit F12, Dashboard springs forward, dimming the background, ready to provide you a wealth of information on everything from airline flights to currency conversions to stock prices—and much, much more if you install some of the hundreds of third-party Widgets that are already available.But all of this power comes at something of a price—mainly increased RAM consumption from open widgets, even if Dashboard itself is closed. Look at the screenshot below and pay attention to the Real Memory column. That figure represents how much actual RAM each Widget is using—even though Dashboard itself wasn’t opened when this image was captured. If you have a Mac with limited RAM, you may wish to disable Dashboard to deny yourself the temptation of these oh-so-handy Widgets. (Even if you don’t disable Dashboard, you should try not to leave lots of Widgets open if you’re working on a RAM-constrained Mac).There may be other reasons you’d rather not have Dashboard available. For instance, if you run a lab of Macs in a school, you may not want the students wasting all their work time on the Asteroids video game widget or watching the (I am not making this up) Goblet of Fire movie release date countdown Widget. If you’d like to disable Dashboard, for either RAM usage or other reasons, here’s how to do it. It requires a trip to the Terminal, in /Applications/Utilities, but it’s not too hard to do.Open Terminal, and then type this command, followed by the Return key:defaults write com.apple.dashboard mcx-disabled -boolean YESThis tells the system that you no longer wish to have Dashboard available. However, the Dashboard task is actually “owned” by the Dock, so to make your changes take effect, you need to restart the Dock. The easiest way to do that is to type this command into the Terminal (and press Return when done):killall Dock
After the Dock restarts, hit F12 and you’ll see…nothing at all. If you run Activity Monitor, you also won’t find any Dashboard widgets in the list of tasks, even if you had several open when you ran the above command. Dashboard has been eliminated from your system, and won’t return until you tell it to do so. You can do just that by opening Terminal again, and typing this command:defaults write com.apple.dashboard mcx-disabled -boolean NO
Once again, you’ll have to use thekillall Dockcommand to make the changes take effect. Once you do, though, you’ll find that Dashboard is back as usual—and any widgets you had opened on the Dashboard will still be open.

Clicking on the dashboard icon opens up the dashboard briefly, and then it opens up Scrabble in Chrome. How do I get it to operate properly?

Clicking on the dashboard icon opens up the dashboard briefly, and then it opens up Scrabble in Chrome. How do I get it to operate properly?

Back up all data.
In the Finder, hold down the option key and select
Go ▹ Library
from the menu bar. From the Library folder, move the following item to the Trash, if it exists:
Caches/com.apple.dashboard.client
and move the following items to the Desktop:
Preferences/com.apple.dashboard.client.plist
Preferences/com.apple.dashboard.plist
Log out, log back in, and test. If you still have the issue, put the items on the Desktop back where they came from and post again. Otherwise, delete the items.

Dashboard keeps opening!!!

If I set up an Active Screen Corner (Dashboard and Exposé preference pane) for Dashboard, I keep having problems with Dashboard randomly opening (and no, I'm not accidently moving my curser to that corner).
Dashboard will sometimes open when I double click on a folder in a finder window, or select something in the menu bar (even if it's at the other side of the monitor from my active screen corner), and even when I select links in Firefox.
If I turn off active screen corners, the problem goes away. But I really miss having the option to just shoot my curser up to the upper left corner and get Dashboard.
Anyone else experience this?
17" iMac Intel Core Duo, 2Ghz, 1gig RAM Mac OS X (10.4.7) Bluetooth mouse

Every Mac has rear ports? Well, my previous purple iMac had all the ports on the side. And my iBook has all the ports on the side. And my Powerbook has all the ports on the side. So this is the ONLY Mac I've ever owned with ports on the rear.
Luckily, I've never had to own (must...wash...hands....) a PC. Every job I've ever had has been in a Mac office. So it's just not something I've run into in the past. Guess it's all what you're used to.
And as for the keyboard ports... Try plugging anything in there with a decent power draw (including my video ipod, phone charger, smartdisk 40gig drive) etc. and a window pops up telling me to either use a different (read; REAR!) port or plug the device into an outlet.
So I have to turn my entire iMac 45 degrees and plug my stuff in.
Anything else you need to know about why I don't like the rear ports on my iMac????
15 PowerBook 1.5 Ghz

I am in mavericks disk utility recovery mode as my mac book will not boot up & stays only on the grey apple screen. When I verify the disk I get open error5 :input /output error on Syst stuck on 1 minute pouring out over 50 error messages & still counting

I am in Mavericks disk utility recovery mode as my mac book pro will not boot up & stays on the Apple grey screen . When I verify disk permissions I get
Open error 5:"input/ output error" on syst with over 50 of this messages & still counting . Disk Utility says 1 minute
But this has been going on for over 10 mins .
I can not verify disk or repair disk .
I have tried to reinstall mavericks operating system but it says my hard drive is locked which is very strange .
Does anyone know what is going on here ?
My system looks like it has been totally corrupted . Thanks Andrew

Could be. The "lock" isn't actually looking for a password.
WARNING: This will completely erase the ENTIRE hard drive.
What you would need to do is boot to recovery > disk utility > select the MAIN drive on the left side > partition > change partition layout from CURRENT to 1 PARTITION > ensure on the right side it says Format : Mac OSX Extended (Journaled) then push APPLY.
Then if it will allow us, close the windows until you see the 4 options popup again and select "Reinstall Mac OS X" select the Mac HD and you should be good to go!

Get open and close items

Hello All,
I need to get Open and Close items for customer based on company code....i mean to say user don't want to give customer number he want to get Open and Close item for all customer under that company code.
It would be great if some one suggest me any function module and BAPI name....

Hi,
I/m not sure whether there is any FM for the requirement.Instead can have a look into this BAPI_AR_ACC_GETOPENITEMS Customer account open items at a key date or CUSTOMER_OPEN_ITEMS FM
In a report prpgram.. Hit the KNB1 table for a specify company code fetch all the customer and using these customers fetch the open and closed items.
Regards,
Aditya
Edited by: aditya on Dec 22, 2009 12:42 PM
Edited by: aditya on Dec 22, 2009 12:46 PM

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

BAPI or FM to get open sales orders to material like TC VA05N

Hi,
i'm searching for a bapi or fm to get a list with all open sales orders to a material like the tc va05n this do. Maybe some of you know such a bapi or fm.
I tried the fm SD_SELECT_SALES_DOCUMENTS but i don't get the result i hoped.
Would be happy if someone could help me.

Hello Alexander,
To get Open Sales order has VA05N use the Function Module
RV_SALES_DOCUMENT_VIEW_3
We need to pass value to the Importing parameters VBCOM
To get the open sales order
VBCOM-VKORG = sales organisation
VBCOM-ZUART = 'A'
VBCOM-TRVOG = '0'
VBCOM-STAT_DAZU = 'X'
VBCOM-NAME_DAZU = 'X'
VBCOM-KOPF_DAZU = 'X'
VBCOM-VBOFF = 'X'
VBCOM-AUDAT = Begin Date
VBCOM-AUDAT_BIS = end date
By passing this variable you will get the all open sales for given sales organisation and given date.

Getting Open MQ and Mule 2.0 work together

Hi!
I would like to ask some help on getting Open MQ work with Mule 2.0. I'm quite new to both technologies, and I can't get them to work together. Here is how I've tried so far:
What I'm trying to achieve first, is that there are 2 queues in my open mq, and if something arrives in one queue, mule should get that from the queue and put it in the other queue.
I've created a configuration file for mule:
(sorry that it looks really crappy, for some reason, couldn't really get it to show nicely on this forum, however I edited it, it always made each line start on the left)
<?xml version="1.0" encoding="UTF-8"?>
<mule xmlns="http://www.mulesource.org/schema/mule/core/2.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:jms="http://www.mulesource.org/schema/mule/jms/2.0"
xmlns:spring="http://www.springframework.org/schema/beans">

<model name="JMSProba">
<service name="JMS">
<inbound>
<jms:inbound-endpoint queue="MyQueue" synchronous="false"/>
</inbound>
<component class="disp.Dispatcher"/>
<outbound>
<outbound-pass-through-router>
<jms:outbound-endpoint queue="out"/>
</outbound-pass-through-router>
</outbound>
</service>
</model>
</mule>
The service component class pretty much doesn't do anything for now, but is like this:
package disp;
public class Dispatcher {
public Object dispatch(Object o){
return o;
I'm using the Mule IDE, and unfortunately I can't even test if this works or not, because when it starts the mule server, I get an error, which I don't understand why I get:
org.xml.sax.SAXParseException: cvc-elt.1: Cannot find the declaration of element 'mule'.
I really have no idea why I get this exception. Anyone knows what I did wrong in my configuration file? Also, can anyone tell me, if what I'm trying to do looks something like this, or I'm doing it all wrong? If anyone can help me get this all to work, I'd really appreciate it.
I haven't seen any info on how to configure the Open MQ Connector, so I'm not sure how to do it. I've tried this:
<connector name="jmsConnector" className="org.mule.providers.jms.JmsConnector">
<properties>
<property name="specification" value="1.1"/>
<property name="connectionFactoryJndiName" value="ConnectionFactory"/>
<property name="jndiInitialFactory" value="com.sun.jndi.fscontext.RefFSContextFactory"/>
<property name="jndiProviderUrl" value="file:///C:/Temp"/>
<property name="jndiDestinations" value="true"/>
<property name="forceJndiDestinations" value="true"/>
<map name="connectionFactoryProperties">
<property name="brokerURL" value="vm://localhost:7676"/>
</map>
</properties>
</connector>
but it doesn't work, the error tooltip says "Invalid content was found starting with element 'connector'", and then the next error is at the first 'property' element, saying "Invalid content was found starting with element 'property'. One of '{"http://www.springframework.org/schema/beans":entry}' is expected. "
Can someone please also help me with the connector creation? Since this had errors, I had to cut it out when trying to run my config file, that's why you can't see it in it.
My next step (if this would work) would be to use this on 2 different JMS's - Mule gets the message from a queue from a certain JMS, then sends it to the queue of a different JMS. Of course I can't start working on this until my first task works, but I was wondering, how to create 2 different connectors and then use different connector for each of the endpoints.
Thanks for any help in advance!
Edited by: kissziszi on Jul 25, 2008 3:06 AM
Edited by: kissziszi on Jul 25, 2008 3:09 AM

Hi Pawan!
Thank you a lot for your help! Unfortunately it's still not working. Here is my current config file:
<?xml version="1.0" encoding="UTF-8"?>
<mule xmlns="http://www.mulesource.org/schema/mule/core/2.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:spring="http://www.springframework.org/schema/beans"
xmlns:stdio="http://www.mulesource.org/schema/mule/stdio/2.0"
xmlns:jms="http://www.mulesource.org/schema/mule/jms/2.0"
xmlns:vm="http://www.mulesource.org/schema/mule/vm/2.0"
xsi:schemaLocation="
http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
http://www.mulesource.org/schema/mule/core/2.0 http://www.mulesource.org/schema/mule/core/2.0/mule.xsd
http://www.mulesource.org/schema/mule/jms/2.0 http://www.mulesource.org/schema/mule/jms/2.0/mule-jms.xsd
http://www.mulesource.org/schema/mule/stdio/2.0 http://www.mulesource.org/schema/mule/stdio/2.0/mule-stdio.xsd
http://www.mulesource.org/schema/mule/vm/2.0 http://www.mulesource.org/schema/mule/vm/2.0/mule-vm.xsd">
<model name="JMSProba">
<service name="JMS">
<inbound>
<jms:inbound-endpoint name="MyQueue" address="jms://queue:MyQueue" synchronous="false" connector-ref="jmsConnector"/>
</inbound>
<component class="disp.Dispatcher"/>
<outbound>
<outbound-pass-through-router>
<jms:outbound-endpoint name="out" address="jms://queue:out" connector-ref="jmsConnector"/>
</outbound-pass-through-router>
</outbound>
</service>
</model>
<jms:connector name="jmsConnector" connectionFactory-ref="openMQ"
createMultipleTransactedReceivers="false"
numberOfConcurrentTransactedReceivers="1" specification="1.1">
<spring:property name="jmsSupport" ref="jndiJmsSupport" />
</jms:connector>
<spring:beans>
<spring:bean name="jndiJmsSupport" class="org.mule.transport.jms.Jms102bSupport">
<spring:constructor-arg ref="jmsConnector" />
</spring:bean>
<spring:bean name="context" class="javax.naming.InitialContext">
<spring:constructor-arg type="java.util.Hashtable">
<spring:props>
<spring:prop key="java.naming.factory.initial">com.sun.jndi.fscontext.RefFSContextFactory</spring:prop>
<spring:prop key="java.naming.provider.url">file:///F:/Info/MessageQueue/mq</spring:prop>
</spring:props>
</spring:constructor-arg>
</spring:bean>
<spring:bean name="openMQ" class="org.springframework.jndi.JndiObjectFactoryBean">
<spring:property name="jndiName" value="MyQueueConnectionFactory" />
<spring:property name="jndiEnvironment">
<spring:props>
<spring:prop key="java.naming.factory.initial">com.sun.jndi.fscontext.RefFSContextFactory</spring:prop>
<spring:prop key="specifications">1.1</spring:prop>
<spring:prop key="java.naming.provider.url">file:///C:/Temp</spring:prop>
</spring:props>
</spring:property>
</spring:bean>
</spring:beans>
</mule>
I get an exception:
A Fatal error has occurred while the server was running:
* Cannot convert value of type [javax.naming.Reference] to required type
* [javax.jms.ConnectionFactory] for property 'connectionFactory': no matching
* editors or conversion strategy found (java.lang.IllegalArgumentException)
or in more details:
ERROR 2008-07-27 18:30:52,953 [main] org.mule.config.builders.AbstractConfigurationBuilder: Configuration with "org.mule.config.spring.SpringXmlConfigurationBuilder" failed.
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'JMS': Cannot create inner bean '(inner bean)' of type [org.mule.routing.inbound.DefaultInboundRouterCollection] while setting bean property 'inboundRouter'; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name '(inner bean)': Cannot create inner bean '(inner bean)' of type [org.mule.config.spring.factories.InboundEndpointFactoryBean] while setting bean property 'endpoints' with key [0]; nested exception is org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'jmsConnector': Initialization of bean failed; nested exception is org.springframework.beans.TypeMismatchException: Failed to convert property value of type [javax.naming.Reference] to required type [javax.jms.ConnectionFactory] for property 'connectionFactory'; nested exception is java.lang.IllegalArgumentException: Cannot convert value of type [javax.naming.Reference] to required type [javax.jms.ConnectionFactory] for property 'connectionFactory': no matching editors or conversion strategy found
I have no idea why I get this exception :(
There are a few things I don't understand in your config file though:
-How come we don't have to specify the address where the broker is running? (like localhost:7676)
-In the spring bean called "context", why do you specifiy the Open MQ installation directory? I mean, why do you have to specify it?
-I don't understand everything in the file, so I might say something stupid now... but ... you have a spring bean called "context", and I don't see it used anywhere. Or do you have to have a spring bean called context? Or is this necessary at all?
About the Open MQ admin tool. Am I correct in assuming, that all you have to do, is create a Broker (and add destination to it), and create an Object Store and add connection factory to it (and optionally physical destination too ... although this is not necessary because if you create a destination and you don't make physical destination for it, then by default it will be created for it). This is what I did with Open MQ tool.
I was wondering if you could please give me your email address, would be easier to communicate over that, this forum seems a bit deserted anyway.
Thanks in advance!
Sziladi Zoltan

Hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

http://support.apple.com/kb/HT1808
Regards.

Bapi/function module to get opening or closing stock for a posting date

I am creating a report where i need to get the opening stock value and closing stock value for the given starting date and ending date respectively for the PP report.
The T-code for that is MB5B.
So,can any1 plzz tell me how i can get the stock value for a starting date/ending date...
Is there any BAPI or function module to find this out..
or any logic?
Thanks.

Hi Kiran,
You would like to findout opening and closing stock of a particular period and of a particular period....
If we would like to findout opening and closing stock of material A as of 18 / 8 / 2008,
then do like this.
go to MBEW table .. there u get opening stock as on today. Today the date is 20/8/2008. from today's opening stock if we add / subtract the movements which have happened on 19/8/2008 and 18/8/2008 u'll get opening and closing stock as on 18/8/2008.
U get the movements from MKPF ( material doc header) and MSEG (material doc item ) based on posting date. In MSEG u get movement type.
If the movement type is 101, it means the stock is added.
If the movement type is 102, it means the added stock is reversed.
from today's opening stock deduct the stock with moverment type 101 and add the stock with movement type 102.
This will give u opening stock as on 18/8/2008.
To get closing stock of 18/8/2008 ..... the opening stock of 19/8/2008 is 18/8/2008's closing stock.

How to get opening balance of a g/l account using query ?

Dear all,
I'm developing consolidated g/l accounts debit,credit totals month wise with opening & closing balances thru query based report,
i'have got expected results except opening balance g/l account,
How to get opening balance of a g/l account based on date as conditonal parameter ?
Any one throw light on this ?
Jeyakanthan

Hi ,
Please kindly help me on this.I don't know how to calculate opening bal and closing bal over a period of time by Quarter, and how to generate the reprot using crystal reports and please suggest me on this how to go ahead with this report.
Here you can go through the reprot requirement , and also an attachment of my Report template.
we have "Category of Investment" , "Income On Investment" ,"Gross yield" and "Net yield" are report fields.
1)"Category Of Investment " is Hardcoded.
2)In this we have to get "Investment" column from VTBFHAPO(BZBETR Field) table Database based on
Flow type(SFHAZBA) in VTBFHAPO table ='0100' for bonds category.
3)"Income on Investment" also we will get from DB using the following formula.
Income On Investment= "Interest IncomeAmortizationCapitalgain"
4)With the Date field(Making Date dimension based on date(DCRDAT) field in VTBFAHPO table.
By Current Quarter,Year to Date,Last year)
5)Opening bal---Investment
Purchase--Flowtype=0100
Meturity/Sales--Flowtype=0200
Closing balance=Opening bal+(Investment or Purchase)-(Meturity or Sales)
'0100' '0200'
Here '0100' and '0200' are Flow types based on this i need to get value from the same Field.
we need to Calculate "Gross yield" .
The bellow are formulas to evaluate "Gross yield "
Ist Qtr .Gross yield=Investment income/(((April opening balanceApril closing balance)/2)((May opening balanceMay Closing Balance)/2)((June opening balance+June closing balance)/2))/3)
Ist qtr. Year to date Gross yield=Investment income/(((April opening balanceApril closing balance)/2)((May opening balanceMay Closing Balance)/2)((June opening balance+June closing balance)/2))/3)
Investment income=interest incomeamortisationcapital gain
Iind Qtr.Gross yield=Investment income/(((July opening balanceJuly closing balance)/2)((Aug opening balanceAug Closing Balance)/2)((Sept. opening balance+Sept. closing balance)/2))/3)
Iind Qtr. Year todateGross yield=Investment income/(((April opening balanceApril closing balance)/2)((May opening balanceMay Closing Balance)/2)((June opening balanceJune closing balance)/2))((July opening balanceJuly closing balance)/2)((Aug opening balanceAug Closing Balance)/2)((Sept. opening balance+Sept. closing balance)/2))/6
This data should display over a period of time. based on "Current Quarter","YearToDate" and "Last year"
The quarter starts from April,i,e FY, I Like this i need to generate the report.
Thanks in advance.

I am using Iphone 4s. In App Store Update, this page is not getting loaded in my iphone. Blank screen is showing up, rest all pages are getting open. Please tell me the problem and solutions.

Hi,
My Name is Pranav.
I am using i phone 4-s.
In my iphone when i go to app store > Updates, system showing me 10 updates but when i try to open this page, page is not getting open. Loader came up and then white blank screen is visible. Rest all Featured, Top Charts Genius and Search are working fine but updates page is not getting open.
Guys please help me out to sort this problem.
Thanks,
Pranav
[email protected]
+91-8460366331

Looks O.K. to me Opens correctly in Firefox and Opera as a log-in page for Killer Content - Win7x64 Fx5.
I can't see any oddities in your plug-ins. It never hurts to clear any relevant cookies and your cache.
You could see how it goes in Safe Mode - Hold Shift key down as you double click on the Firefox icon>ignore the page that opens and continue. If the page opens you probably have a problem with extensions or themes and you should work through this -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
A lot of things have been updated as well as Firefox and you could have a culprit or conflict. Next, if there is no improvement you could try disabling third party toolbars, and you should report back at this stage or if there has been early success.
Someone may come by with a more specific remedy.

My i pad is not getting open after it bang with door no scratch has come because it was in leather cover but its not getting open kindly suggest?

my ipad is notb getting open after my baby had bang with the door no scratch has come but it is not switching on can u please advice.
i will be thankful if u provide sufficient information.

Hi Naveen,
What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
What action needs to be taken if the hostname or SID of the database server is changed?
If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
Eric

How to get open PS

Hi,
I want to know, what is open PS.
Can it help me to down load SAP PS structure to Microsoft Project (MSP)
How can I get open PS.
Regards
SCSharma

Hi Subhas,
You can get Open PS from SAP service market place .
It is a free from SAP..
After logging to SAP service market place to go Download section and down load the open PS software.
hope this may help..
Regards
shiv

Dashboard gets opened

Similar Messages

Maybe you are looking for