Dashboard problems And Blue Screen Os x lion
Hello, I do not know why, but recently when i open the mac I get the first user screen a blue screen that disappears and I do not know how to remove it. I tried to automatically fix anyproblems with the hard drive and reinstalling but no lion .. Also now I do not work any moredashboarad is locked and not part of any widget ... I can do? the computer is brand new and is still under warranty ..
thanks
but some indication is to solve the problem now? No I called the support number is still under warranty, even if no apple care
Similar Messages
-
Blackberry Desktop Software (Roxio, specifically) causes network problems and blue screens.
I'm posting this note because I just solved my network issue/crash problems. I started experiencing lots of disconnects and page not found on my office computer over the past few days. Only thing I could think of that was different lately was that I installed the Blackberry Desktop Software. Then a huge lightbulb went on over my head. I remembered when it was installing, it said it was installing "Roxio" software and at that moment shivers went down my spine from past experiences.
Well, I have lots of good "bad" experiences with Roxio CD software which had caused these same problems on two of my home computers. It caused blue screens when used in conjunction with my wireless Netgear card and also standard network card. The same symptoms including very slow internet access, general machine sluggishness, etc. I was trying to chase this down for months til I finally removed the Roxio crapware and ALL problems went away. No more slow machine, no more page not found and no more blue screens on two of my computers. Now, on a completely different Toshiba work laptop and different network adaptor, same problems.
So, here we are again with Roxio as part of Blackberry Desktop software. I like my new Blackberrry 8830, but I have to pass this along to the Blackberry folks because I KNOW I'M RIGHT about this. I only installed the software so that I could type my contacts into Outlook and then download to my Blackberry. So, after realizing the common symptoms and after having completed my download (which worked great by the way), I removed the Blackberry Desktop Software and I'm back to speedy everything, no more pages not found, no more putty disconnects, and no more blue screens.
I hope someone gets good use of this post because this drove me crazy the first time around.
-- JeffWe had the same problem.
We did extensive troubleshooting, and found the problem was effecting our new HP Windows XP .Laptops.
We did not have any trouble with the Older Dell Latitude we have.
We found the BSOD still happened after removing the Black Berry Desktop Manager Software.
We traced it to a memroy / resource leak in the USB subsystem.
The workaround we found is to go into the Device manager, and remove all the drivers from the USB section.
** Disclaimer : This works for us, but may make your computer unusable. Backup your data to external storage.
Back up your computer
Start -> control Panel -> system ->Hardware tab -> Device manager.
Expand "Universal Serial Bus Controller" at bottom of list.
Right click on each Item, and select "uninstall"
Don't reboot after each one.
* Remove ALL the entries under Universal Serial Bus Controllers *
Repeat until all the entries under "Universe Serial Bus Controller" are removed
(there may be one that sticks, thats ok. so long as it has been uninstalled.
Reboot.
The OS will rebuild the USB stack and drivers to default.
This has worked for us so far.
We are not sure if this wont break something else. -
Recovery problem and blue screen .. i need help
i have mac book pro 10.6 . the system is been down for around 7 days and can not fix it . when it's start up i found blue screen and can not access to anything because all my apps are hide. also i can not access to safe boot .
i'm trying to recover the system but i tried to click on command + option but i could not find recover HD option there is only one option . also i dont have recover cd to recover the ssystem i'm trying to fix it by using command line but it doesn't work as well
i have used this command line via click on command +s :
munt -uw /
rm /var/db/ .applesetupdone
shutdown -h
but this command only create for me new user ... i'm gonna loss my minds because of many youtube videos . please help meTry the procedures in this support article:
http://support.apple.com/kb/TS2570
Ciao. -
Dmp file and blue screen error Windows 7
Hi,
Just wondering if someone can tell me how to read the dmp file created after the blue screen appears ?
I have just recently upgraded my Toshiba P300 from Vista 64 bit to Windows 7 Home Prem 64 bit.
I dont know why Windows 7 keeps crashing and so far I have no idea of how to open the .dmp
file (I have zipped the dmp file and attahced below).
http://cid-7a99d6152c55359c.skydrive.live.com/self.aspx/.Public/minidump/022710-26223-01.zip
The message that I been given so far says :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: a
BCP1: FFFFF6FC40052000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF80002E62322
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\022710-26223-01.dmp
C:\Users\Caroline\AppData\Local\Temp\WER-125393-0.sysdata.xmlI have try step 1 and didnt boot up the window normaly...same thing happened
Window 7 is loading...then boom the screen failed and blue screen appear...
there is the latet crash report
Version=1
EventType=BlueScreen
EventTime=129810543666556864
ReportType=4
Consent=1
ReportIdentifier=9fb6a978-99f3-11e1-9b67-fa9a72be4846
IntegratorReportIdentifier=050912-14508-01
Response.type=4
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.1
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=3084
UI[2]=C:\Windows\system32\wer.dll
UI[3]=Windows has recovered from an unexpected shutdown
UI[4]=Windows can check online for a solution to the problem.
UI[5]=&Check for solution
UI[6]=&Check later
UI[7]=Cancel
UI[8]=Windows has recovered from an unexpected shutdown
UI[9]=A problem caused Windows to stop working correctly. Windows will notify you if a solution is available.
UI[10]=Close
Sec[0].Key=BCCode
Sec[0].Value=a
Sec[1].Key=BCP1
Sec[1].Value=0000000000000000
Sec[2].Key=BCP2
Sec[2].Value=0000000000000002
Sec[3].Key=BCP3
Sec[3].Value=0000000000000001
Sec[4].Key=BCP4
Sec[4].Value=FFFFF8000308BB7E
Sec[5].Key=OS Version
Sec[5].Value=6_1_7601
Sec[6].Key=Service Pack
Sec[6].Value=1_0
Sec[7].Key=Product
Sec[7].Value=256_1
File[0].CabName=050912-14508-01.dmp
File[0].Path=050912-14508-01.dmp
File[0].Flags=589826
File[0].Type=2
File[0].Original.Path=C:\Windows\Minidump\050912-14508-01.dmp
File[1].CabName=sysdata.xml
File[1].Path=WER-27253-0.sysdata.xml
File[1].Flags=589826
File[1].Type=5
File[1].Original.Path=C:\Users\Moz\AppData\Local\Temp\WER-27253-0.sysdata.xml
File[2].CabName=Report.cab
File[2].Path=Report.cab
File[2].Flags=196608
File[2].Type=7
File[2].Original.Path=Report.cab
FriendlyEventName=Shut down unexpectedly
ConsentKey=BlueScreen
AppName=Windows
AppPath=C:\Windows\System32\WerFault.exe
ive also have got a AI SUITE II crash...
Version=1
EventType=APPCRASH
EventTime=129809041249476693
ReportType=2
Consent=1
UploadTime=129809041250516752
ReportIdentifier=ddea075d-9895-11e1-9a9f-eb38eba38a41
IntegratorReportIdentifier=ddea075c-9895-11e1-9a9f-eb38eba38a41
WOW64=1
Response.BucketId=2555721005
Response.BucketTable=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=AI Suite II.exe
Sig[1].Name=Application Version
Sig[1].Value=1.0.0.40
Sig[2].Name=Application Timestamp
Sig[2].Value=00000000
Sig[3].Name=Fault Module Name
Sig[3].Value=KERNELBASE.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=6.1.7601.17651
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=4e211319
Sig[6].Name=Exception Code
Sig[6].Value=0eedfade
Sig[7].Name=Exception Offset
Sig[7].Value=0000b9bc
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.1
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=3084
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=0a9e
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=0a9e
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
UI[2]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
UI[3]=AI Suite II has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
LoadedModule[4]=C:\Windows\syswow64\WINTRUST.DLL
LoadedModule[5]=C:\Windows\syswow64\msvcrt.dll
LoadedModule[6]=C:\Windows\syswow64\CRYPT32.dll
LoadedModule[7]=C:\Windows\syswow64\MSASN1.dll
LoadedModule[8]=C:\Windows\syswow64\RPCRT4.dll
LoadedModule[9]=C:\Windows\syswow64\SspiCli.dll
LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll
LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
LoadedModule[12]=C:\Windows\syswow64\ADVAPI32.DLL
LoadedModule[13]=C:\Windows\system32\VERSION.DLL
LoadedModule[14]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_ec83dffa859149af\COMCTL32.DLL
LoadedModule[15]=C:\Windows\syswow64\GDI32.dll
LoadedModule[16]=C:\Windows\syswow64\USER32.dll
LoadedModule[17]=C:\Windows\syswow64\LPK.dll
LoadedModule[18]=C:\Windows\syswow64\USP10.dll
LoadedModule[19]=C:\Windows\system32\MSIMG32.DLL
LoadedModule[20]=C:\Windows\syswow64\SHELL32.DLL
LoadedModule[21]=C:\Windows\syswow64\SHLWAPI.dll
LoadedModule[22]=C:\Windows\syswow64\OLE32.DLL
LoadedModule[23]=C:\Windows\syswow64\OLEAUT32.DLL
LoadedModule[24]=C:\Windows\system32\IMM32.DLL
LoadedModule[25]=C:\Windows\syswow64\MSCTF.dll
LoadedModule[26]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[27]=C:\Windows\system32\rsaenh.dll
LoadedModule[28]=C:\Windows\syswow64\imagehlp.dll
LoadedModule[29]=C:\Windows\system32\ncrypt.dll
LoadedModule[30]=C:\Windows\system32\bcrypt.dll
LoadedModule[31]=C:\Windows\SysWOW64\bcryptprimitives.dll
LoadedModule[32]=C:\Program Files (x86)\ASUS\AI Suite II\AsMultiLang.dll
LoadedModule[33]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[34]=C:\Program Files (x86)\ASUS\AI Suite II\ImageHelper.dll
LoadedModule[35]=C:\Windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.17514_none_72d18a4386696c80\gdiplus.dll
LoadedModule[36]=C:\Windows\system32\USERENV.dll
LoadedModule[37]=C:\Windows\system32\profapi.dll
LoadedModule[38]=C:\Windows\system32\GPAPI.dll
LoadedModule[39]=C:\Windows\system32\cryptnet.dll
LoadedModule[40]=C:\Windows\syswow64\WLDAP32.dll
LoadedModule[41]=C:\Windows\system32\SensApi.dll
LoadedModule[42]=C:\Windows\system32\Cabinet.dll
LoadedModule[43]=C:\Windows\system32\DEVRTL.dll
LoadedModule[44]=C:\Windows\system32\WindowsCodecs.dll
LoadedModule[45]=C:\Windows\system32\WINHTTP.dll
LoadedModule[46]=C:\Windows\system32\webio.dll
LoadedModule[47]=C:\Windows\syswow64\WS2_32.dll
LoadedModule[48]=C:\Windows\syswow64\NSI.dll
LoadedModule[49]=C:\Windows\system32\credssp.dll
LoadedModule[50]=C:\Windows\syswow64\mswsock.dll
LoadedModule[51]=\\.\globalroot\systemroot\syswow64\mswsock.dll
LoadedModule[52]=C:\Windows\syswow64\WININET.dll
LoadedModule[53]=C:\Windows\syswow64\Normaliz.dll
LoadedModule[54]=C:\Windows\syswow64\iertutil.dll
LoadedModule[55]=C:\Windows\syswow64\urlmon.dll
LoadedModule[56]=C:\Windows\system32\Secur32.dll
LoadedModule[57]=C:\Windows\System32\wshtcpip.dll
LoadedModule[58]=C:\Windows\System32\wship6.dll
LoadedModule[59]=C:\Windows\system32\IPHLPAPI.DLL
LoadedModule[60]=C:\Windows\system32\WINNSI.DLL
LoadedModule[61]=C:\Windows\system32\dhcpcsvc6.DLL
LoadedModule[62]=C:\Windows\system32\dhcpcsvc.DLL
LoadedModule[63]=C:\Windows\syswow64\CFGMGR32.dll
LoadedModule[64]=C:\Windows\system32\uxtheme.dll
LoadedModule[65]=C:\Windows\system32\DNSAPI.dll
LoadedModule[66]=C:\Program Files (x86)\Bonjour\mdnsNSP.dll
LoadedModule[67]=C:\Windows\system32\rasadhlp.dll
LoadedModule[68]=C:\Windows\System32\fwpuclnt.dll
LoadedModule[69]=C:\Program Files (x86)\ASUS\AI Suite II\AssistFunc.dll
LoadedModule[70]=C:\Windows\system32\PROPSYS.dll
LoadedModule[71]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll
LoadedModule[72]=C:\Windows\system32\apphelp.dll
LoadedModule[73]=C:\Windows\syswow64\CLBCatQ.DLL
LoadedModule[74]=C:\Windows\system32\wpdshext.dll
LoadedModule[75]=C:\Windows\system32\WINMM.dll
LoadedModule[76]=C:\Windows\System32\shdocvw.dll
LoadedModule[77]=C:\Windows\SysWOW64\ieframe.dll
LoadedModule[78]=C:\Windows\syswow64\PSAPI.DLL
LoadedModule[79]=C:\Windows\SysWOW64\OLEACC.dll
LoadedModule[80]=C:\Windows\syswow64\SETUPAPI.dll
LoadedModule[81]=C:\Windows\syswow64\DEVOBJ.dll
LoadedModule[82]=C:\Windows\system32\ntmarta.dll
LoadedModule[83]=C:\Program Files (x86)\ASUS\AI Suite II\pngio.dll
LoadedModule[84]=C:\Program Files (x86)\ASUS\AI Suite II\AsAcpi.dll
LoadedModule[85]=C:\Program Files (x86)\ASUS\AI Suite II\asacpiEx.dll
LoadedModule[86]=C:\Windows\system32\RpcRtRemote.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=-1739246291/nBucketTable=1/nResponse=1/n
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=AI Suite II
AppPath=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe -
IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?
If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you. -
Satellite L300D-11A - DVD-drive issue and Blue Screen
Hi
I'm going out of my mind :o//
My Satellite L300D-11A was delivered with a Windows Vista Home Premium, but I recently made a clean installation of the Windows 7 Home Premium 64 bits.
Since then I have had problems with "Blue screen error's" comming randomly. Have purchased and installed a Registry clean up program, but that did not fix the problem. Any one else with that problem - and a possible solution.
And now for my big problem. My CD and DVD drive is driving me crazy ;o) It's a Mat****a DVD-RAM UJ-850S ATA and from my search on the internet I have found that a lot of other Mat****a owners have had the same or similar problem(s). My drive will not regonize or play/read from CD's. DVD with movies or programs I can play. Burning CD's is not possible and burning DVD's is sometimes working, and other times not.
I have read about the different fixes that is posted - also here on the Toshiba forum - Non of the suggested solutions is working for me - any new solutions that I could try.
Seriously thinking about buying a external USB DVD drive/burner - but can someone please tell me why Toshiba does not get the fingers out off their B** and find a solution like it seams Sony has done.
Look forward to any reply ;o))
Someone once told me about this quote - "Don't wish it was easier - work on getting clever !" I need your help to get clever ;o))> But I do not now how/where to get the registration keys! I have tried looking for them.
Are you talking about *Upper/Lower Filters* ?
Follow these instructions for clearing the Upper/Lower Filters:
Click on Start --> Run --> and type in 'regedit' followed by the enter key
Expand the "HKEY_LOCAL_MACHINE" key (looks like a folder) by double clicking it (or clicking the "+" next to it.)
Expand the "SYSTEM" Key
Expand the "CurrentControlSet" Key
Expand the "Control" Key
Expand the "Class" Key
Please look for a key containing the following string of letter and numbers:{4D36E965-E325-11CE-BFC1-08002BE10318}
High light this key by left clicking once on it
On the right hand side you are looking for "UpperFilters" and "LowerFilters" under the "Name" column, once you find these please delete them by right clicking on them and choosing "delete"
Please exit the registry by clicking on the "X" in the top right hand corner of the screen
Reboot your computer -
Can Motion 5 replace a green screen and blue screen in the same shot?
Can Motion 5 replace a green screen and blue screen in the same shot? I would like to replace a green screen with one image, and a blue screen with another.
Fox gives a good example for keying green & blue (or any other color) from the same shot. I'd suggest doing a few things to get better accuracy.
First, the motion keyer always removes the color it detects the most of by default (blue/green). You can override this by setting the Strength parameter to zero, then use the Color sample tool to select the color you want. The advantage is motion will do a good job of targeting only the hue (color) that you want to remove and set an appropriate starting softness. It also will remove spill based on this color. Looking at Fox's example movie and the shot, I'd approach the same shot this way:
Remove the Blue
1. Apply the keyer and set the strength to zero.
2. Use the Sample Color tool and select the blue (or other color) to be removed.
3. Decrease the spill level (if needed). In Fox's example the spill from the blue glasses is going to be minimal, especially compared to the green screen, your shot may need different adjustments. Only de-spilling what you need to will give you more accurate color right away and minimize additional color correction that might be needed later.
4. Use the Color selection tools (Chroma wheel/Luma bar) to fine tune. Ideally you want a minimal tolerance, the inner selection, with a nice fall off, the outer selection. Try with the Scrub boxes setting first, then switch to manual if you need more control. Again see Fox's example.
Remove Green
It's the same as the blue, you could apply the keyed to the same clip or a parent group, at this point it's many user preference.
With these techniques you can remove any color from a shot or create a mask based on a color. BTW, as you are learning to use the keyer I'd highly recommend having the Color Selection open so you can see the graphs. These give you real time feedback as you make selections and changes with the Strength, Refine and Color selection tools. Watch what happens as you make selection or changes, sometimes the problem area is actually in the brightness not the color, or the softness may change more than the tolerance selection. Observing what is happening in these graphs will help you figure out wha to change and speed things up. -
Blank Black Screen And Blue Screen. Do I Need To Do Reflow To Ati Chipset?
Hello i want to tell you my problems and what i did until now.
I have hp pavilion dv3 4150st. I was using win7 64 bit . and i was geting an error that says "display driver amd driver stopped responding and has successfully recovered".I started to get this eror often . And a few days later my pc startet to get blue screen errcor after a few second later than display driver error. . And after 2-3 blue screen error i lost my screen. It was blank black . when i restart pc the screen was blank black. there was no image. When i started to fix another monitor, i saw screen . And i installed the win 7 with another external monitor. Bu i had still black screen after install the windows.. Itand was still black after i remove the ectgernal monitor. I installed bios again but i had still black screen. And i tried the install ati display driver after installing windows . But after i installed the display driver, i had the blue screen error again. And now i have still both blank black screen and blue screen problem.
I cleaned the motherboard. I resetted bios. I installed bios. i installed windows again. i installed ati display driver.But these couldnt solve the problems. Please can you tell me what can i do now ?Hi beginner_2012,
Thank you for your post, I will do my best to assist you.
I grasp that you were getting the error "display driver amd driver stopped responding and has successfully recovered" quite often. Then a few days later you got the blue screen then the above error message, after 2 -3 more errors the screen is now blank or black. Here is a document to assist you with this. Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
X-Fi Titanium and Blu-Screen (Win XP)
%[ Hi ti all, i am a new user and, of course, i have my first big problem with creative drivers/software.
Before installation of audio card all worked greatly but after i get a blu screen at shut down or at reboot (is the same).
I used the latest version of the drivers available on the web (2.7.0006).
I removed audio card and drivers and all works greatly, too.
I reinstalled audio card + drivers and blu screen at shut down/reboot appears again.
Anyone knows the solution.
Audio card works correctly but with this blue screen ?the creative console don't save any settings, so every time
i turn on the pc i have to configure it (effect, mixer, number of speakers, mic amplifiers, etc. etc.).
Please help me.
This is my configuration:
Cpu Intel Core i7 920
M/b Asus P6T (bios 0603)
Ram 6 Gb DDR3 (3x2Gb DDR3 Corsair) ('cause i have Vista64 on another partition)
ATI Radeon HD4890 Gb?
HD Seagate 500 Gb
Thanks in advance.Anyone?Message Edited by Rayman968 on 08-0-2009 2:47 PM
-
Does this sound like a logic board problem? Blue screen
I have a G4 1.33GHz iBook 14". Recently it has started having problems with freezing and booting. It will boot normally, but a few seconds or minutes into use, if freezes, and only a force shutdown with the power button will work. Then, when it restarts, it may run fine, or may freeze up. Sometimes when it boots, the apple logo shows up, then the spinning wheel, then a light blue screen. And then, nothing.
I have tried all the usual stuff, including starting with the 10.4 DVD and running disk utility. Also Onyx and version 3.03 of Disk Warrior. It wouldn't boot from the Disk Warrior CD usually, and the one time it did, if froze up.
SO, I ended up booting it in Firewire Target Disk mode, and reformatting (zero'd out) using my MacBook. Then, reinstalled the 10.4 and upgraded to 10.4.7 using Software Update. It worked fine for about two hours, and then started freezing and blue screening again.
Does this sound like a logic board thing? It just occurred to me that I haven't tried all this stuff with my additional 1 Gb stick of RAM out. It hasn't caused any problems before, but I suppose it might affect this, no?
Sorry for the long post, but I want to try to diagnose and fix BEFORE it goes off to Apple to be returned with a "we can't demonstrate the problem" message and a bill.
Thanks
RogerI took out the 1 Gb stick and it did the same thing. About half the time it boots, works for a little while then freezes up. The rest of the time it won't boot past the spinning wheel then the blue screen. Same deal with the OSX DVD and the DiskWarrior CD.
Frustrating. I may have to send it in.
RDS -
I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues. -
Cropping and Blue Screening - 2 unrelated questions.
1) When I straighten a still in Canvas by using the wire frame, to make a house level, say, the cropping lines, naturally, move with it. So a cropping line at an angle will give me a slanting top and bottom line. So how can I crop it so that the picture has a square aspect? Is the only recourse to go back to the original site for the picture, GIMP or iPhoto, perhaps, crop it there and re-import the photo into FCE? Or is there a quicker way?
2) I have added a number of videos above my main video to show, for example, falling snow, and eliminated their black background by Modify - Composite Mode - Screen. Very easy and by no means unusual. So, my question, is, why all the fuss about green and blue screening? Setting it up seems troublesome. A black background for the purpose is much easier to make, and, for that matter, easier to find. I looked down my back yard this morning and this side of the creek are jet black bushes which would seem ideal for such a purpose. This seems such a no-brainer that I think I must be missing something. But it is curious.
Allosaurus1) I shall immediately turn to the garbage matte section in your book - I'm sure I remember seeing one - and work it out from there. And here I always thought a garbage matte was that rug I bought in Cairo.
2) A black screen. That does give me a thought. When I return to my upcoming masterpiece, " "Orrible Murder at the Castle Doom" I could put one of my granddaughters in a black suit, photograph her against a black background and Voila! a floating head. I wonder if they give out Oscars for original ideas?
Once more. Thank you.
Allosaurus -
My ipnone 5s keeps crashing and blue screening any advice
My ipnone 5s keeps crashing and blue screening any advice
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (sorry, I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
Thanks for any help!You have to take the computer to the Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best. -
Mac Pro 1,1; 10.6.4
On attempting to start up recently I got a screen in alternating shades of blue.
Trying to boot to a bootable CD gives me a 'you need to restart' grey screen.
Booting to the diagnostic works and finds no problems.
Booting in firewire target mode allows access to the HD and repaired some errors with diskutility but did not change symptoms. Subsequent checks show no errors.
Booting to an ubuntu livecd worked fine with generic graphics drivers (up to date drivers available but require a reboot).
Booting into safe mode has the blue screens alternating with a black screen with a white rectangle in the top left (about the size of an old terminal cursor).
Zapping PRAM doesnt seem to change anything.
Recent upgrades include +4GB RAM which I have removed and errors remain with the original 1GB RAM (2x512)
I have also replaced the graphics card recently, GT 8800 stopped working and I replaced it with another GT 8800.
The help pages on blue and grey screens seem to be mutually exclusive but both discuss removing peripherals and non Apple hardware.
Per above, I have tried the diagnostic/safe/boot CD options mentioned in both and the only option I cant try is removing the graphics card (unless there is a way to test a successful boot without a screen?)
I suspect it is either a graphics fault which ubuntu doesnt mind but OSX does, or a more complex disk corruption.
The next option appears to be erasing the disk with firewire/diskutil and attempting a fresh install (not sure why this would remedy the kernel panic on booting from CD).
Some logs have been populated in Library/Logs/DiagnosticReports, I can post fragments as required but am unable to interpret atm.
Any suggestion appreciated.Seems hardware related and you would get more direct responses if you posted in the appropriate Mac Pro forum:
http://discussions.apple.com/category.jspa?categoryID=194
Maybe you are looking for
-
ID 5.5 Interact. PDF, cannot remove white background for Multi-States and buttons.
Hi I am working on an Interactive PDF Portfolio document. The problem I have is with Multi-State object feature with several buttons going to states that need to be exported as a SWF and imported back into InDesign 5.5. See, the background of my enti
-
Seeking help with windows 7 and Photosmart P1100
I know its an older printer and they arent making updated drivers for it, but is there any work around? Are there some drivers out there that will atleast give me basic print functions back? I can't see buying a new printer when this one works perfec
-
I have noticed on my MacBook Pro 15" that when the lid is closed, there is a bigger gap on the right, then on the left side between the lid and the bottom. Is that normal?
-
Using Spaces and Different Wallpaper
I have Spaces set up so certain applications only appear in certain spaces, but I'm wondering if there's a way to have each space have its own wallpaper. Is this possible? - Keith
-
After the most recent update, the screen went white on my touch. Any one else have this prob?
After recent update of my 4th gen iPod touch, the screen went white. I can still see the background a little but, there is a screen "burn in" as well. I restored it but it did nothing to fix it. AHHHH!