Dashboard resets to it's condition as of March 27th after every start-up

As said in my subject heading, the dashboard on my Macbook resets to it's condition as of March 27 every time I restart or turn on the laptop. No matter what, every time I restart it, my widgets change and the information on my sticky notes on the dashboard are lost. Does anyone know how I can solve this issue?

What condition was your computer in on March 27th? Does this issue appear if you open up a new account? Have you tried repairing permissions and restarting the computer afterwards?

Similar Messages

Screen brightness resets after every start up

Hi all, haven't been here in about a year. My imac's brightness has been resetting to the darkest point every time I shut down then subsequently start up (next day, whenever). I always had it set at it's highest point, which is what I preffered, and now I have to set it with the keyboard EVERYTIME! Not the end of the world but a little irritating. I don't know if it's related but also lately my normally smooth running imac has been hanging up on me with the spinning beach ball of death and I routinely have to initiate a "force quit" but don't have to actually force quit any app. for the imac to resume as normal. All I have to do is close the force quit window, wierd. 3rd party culprit?
Thanks guy's.
vanessa_b

Sounds strange.. Have you done the usual maintenance people around here suggest... repair permission.. clean caches? That's what I would do considering your other problems.
May want to try a Utility like this:
http://www.versiontracker.com/dyn/moreinfo/macosx/26516
Also, you may want to consider creating another account.. set that account to open upon boot... and see if the screen problem persists. If it doesn't, then it may be an issue with a preferences file...although I'm not sure screen brightness is controlled by a preferences file.. worth a shot though.

Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

I tried to reset my iPad, and it has not got past the apple start up page

I tried to reset my iPad, and it has not got past the apple start up in several hours. I've tried connecting it to itunes but its not detected.
What can I do?

I assume that you mean that all you see on the screen is the Apple logo and it hasn't changed for hours from that screen. You may need to restore using recovery mode, since your iPad is not being recognized in iTunes.
Instructions here.
http://support.apple.com/kb/ht4097
But - did you try this first?
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Conditional copy of payload attributes after HT

Hi,
How can I conditionally copy the payload attributes after the execution of a HT.
Say that I have an attribute in my payload named hasAtlestOneCustomerAcceptedOffer and I have a Parellel gateway where I create multiple tasks in parellel.
I want to copy the value of this attribute only when it is "Yes". I looked at teh data associations but couldn't be sure about how to do it ..
I am using 11.1.16
Thanks

Hi --
You have to use the XSLT 'if' or 'when' constructs - you can find examples here:
- http://www.w3schools.com/xsl/el_if.asp
- http://www.w3schools.com/xsl/el_when.asp
Hope this helps,
Fernando

Condition value in SD is multiplied every time

Hello,
I have one pricing condition (ZH03) which is manualy entered at header level. If I press Activate, this condition is copied to each item (I have 2 items in my test invoice) with the same value. But after every reload of pricing scren, condition value is doubled, so final price is going higher and higher, which is good for as but not so convenient for customer
Does anybody have similar experience or some advice to me?
Thanks&regards

Hello,
thanks for answer, but I already have this tick in customizing and it doesn't help. Here is the maintenance of the condition:
Cond. class A
Calculat.type B
Cond. category F
GroupCond X
RoundDiffCond X
Header condit. X
Item condition X
Delete X
Amount/percent X
Scale basis C

How do i reset administrator password if i forgot password and do not have start up disk

how do i reset admin password if i forgot password and do not have start up disk

http://osxdaily.com/2011/04/25/change-admin-password-mac/
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

Have to reset digital out after every reboot - please he

I have my speakers digitally connected to my X-Fi and i'm facing the following problem: after every WinXP reboot i have to reset the digital out in the THX setup console in order to get sound again. My drivers are the latest version, downloaded from the Creative site, whereas the tools (various setup consoles) are from the original install CD. Is maybe this causing it's Are there later versions of the consoles available (to correspond to the latest drivers), didn't find any on the Creative site?
Would appreciate help...

I was having the same problem, but it seems for me it's just if I'm in game mode. I use x-fi mode changer http://www.freewebs.com/spectra9/xfmc.html?and have the default setting as Entertainment mode. Now I almost never have to waste time switching digital out off and on again. I've got bf2 and bf242, and gamespy set to automatically switch to game mode via this utility so I don't curse myself anymore for forgetting to switch to game mode anymore.

Hello..i have IPhone 4S i did reset to factory settings by fault and till now after a 2 hours there is nothing just a waiting icon in the middle of the screen and none of home or turn off button are response so i do need your help plz

hello..i have IPhone 4S i did reset to factory settings by fault and till now after a 2 hours waiting (as known it takes a 1 to 2 minutes maximum) there is nothing just a blank screen and a running waiting icon in the middle of the screen and none of home or turn off button are responsed so i do need your help plz & thanks in advance..

Try to reset it by holding the power an home buttons at the same time until you see the Apple logo, then release. If it won't reset, you'll probably have to force it into recovery mode and restore it, as explained here: http://support.apple.com/kb/ht1808.

Starting conditions are invalid. Number of WF started: 0

Hi experts,
I noticed very strange situation in case of SC autoapproval WF (SRM 5.0 Extended Classic). When I activate standard WF indicating my starting conditions everything is OK. But when I made a copy of that standard WF SC autoapproval and indicated the same starting condition I can shop because system gives an error that no WF found for SC. In application monitor there is an error Starting conditions are invalid. Number of WF started: 0. How this is possible? The starting conditions are the same, WF are also the same - one of them is only a copy of another....
Please give me some advise if you have any ideas...
Regards,
RafaD

Hi,
please check if the starting conditions of the original Workflow are still active. In SRM, the starting conditions must not overlap, so take care that the system found exactly one workflow. Easiest way to check this is by de-activating the original starting conditions.
regards
Chris

Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it?

Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!

- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store.

TS1424 Can't download, buy or even update apps / A message advising a new Itunes terms and conditions is coming up even after my agree and acceptance... Is there a problem in Itunes? same problem with deferent devises

A message advising a new Itunes terms and conditions is pop up even after my agree and acceptance... Is there a problem in Itunes? same problem with deferent devices
Just Can't download, buy or even update apps...

I use only one Apple ID and only one ID. I did have to change the password at one point but I had no issues at all with updating apps after I changed the password.
If you can download new apps with the ID that you changed the password for, I would think that you will be able to update apps associated with that ID as well.
Did you try restarting the iPad after signing out of the one account and then sign in to the other account/accounts?

I bought an iPhone5s previous year from a man, but now I reset it and I don't have his apple ID to start my phone.

hello.
I bought an iPhone5s previous year from a man,but now I reset it and I don't have his apple ID to start my phone.
what should I do?
I can't find him.
Please help me.
I paid a lot of money and now I can't discard it!
<Re-Titled By Host>

You will have to find the person that you bought it from, he is the only person that can remove the phone their account : Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
If you can't find him then you won't be able to reactivate the phone.

After I covered 250 miles I got the automated congratualtions, but now after every run I get the recorded message again saying I just covered another 250 miles. Can I reset or stop it without completly resetting everything?

I run with the Nano and shoe sensor. After I covered 250 miles I got the automated congratualtions, but now after every run I get the recorded message again saying I just covered another 250 miles. Can I reset or stop it without completly resetting everything?

Same issue here. This is really disappointing. I used to look forward to the milestone messages after each run, especially when I was surprised by a celebrity voice. Now, it's the same thing every single time, "Congratulations on another 250 miles. Way to go!" or something along those lines. I was proud of the 250 mile mark, but please...I don't want to hear it every time!
I hope there's some movement on this issue.
~ Heather

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

Dashboard resets to it's condition as of March 27th after every start-up

Similar Messages

Maybe you are looking for