Dashboard Translate Program, How do I get the translation to the clipboard

If I highlight my translation, I can't put it in the clipboard because the Dashboard disappears when I click Edit in order to copy.
Is there a way to get the Translate program on to my desktop so that I may copy results into the clipboard?

Highlight the text and press Command-C. To paste, press Command-V.

Similar Messages

  • C Programming: How can we get the filesystem name for a given file-path?

    C Programming: How can we get the filesystem name for a given file-path?
    Say I have a filepath=/mnt1/file1
    Using some OS API like stat, can I get the Filesystem /mnt ?
    Thanks in advance,
    -V

    Enter the command up to the point of entering the file path and add a space, then drag the file into the terminal window. It will fill out the path.
    If you need to go further into the contents of the Application package, you can continue with /Contents...
    Another way is to start typing and then hit Tab to auto-complete. It will stop where it can't determine the next letter.
    So, type /App tab and it will fill in /Applications. Type a / and start with the name of the app, then tab and it should complete. Continue till you have the correct path.
    Spaces will be replaced with \<space>, so, App Store would end up as /Applications/App\ Store.app

  • When I launch the dashboard Bejewelled opens, how do I get the dashboard to stay open?

    Has anyone else had the same problem?

    What operating system? 10.6 or 10.7?
    I'm going to assume you have 10.6
    Dashboard is a OS X temporary pane that appears over everything else to use widgets which Bejewelled is one of them correct?
    When your done it disappears.
    Hitting F12 usually opens and closes Dashboard. hitting the circle x thing brings up a row of your installed widgets, but not on the Dashboard if you didn't drag them out to use yet.
    What I can gather by what your asking, is you want the widget to appear along with all your other programs right?
    http://www.apple.com/downloads/dashboard/
    You can use a program called WidgetRunner that you have to find and open the widget you want to run along with all your other programs on the Desktop without needing Dashboard.
    Some widgets are System installed, others are in your users folder . It operates outside of Dashboard as it's a program.
    http://www.macupdate.com/app/mac/33569/widgetrunner

  • How can I get the events from a java program?

    I want to make a monitor to watch a java program.How can I get the events from the GUI of this program some as mouse cliking, keyinput. So I can watch these in my monitor.
    Thanks

    Hi,
    To put a monitor to the events occuring in the GHUI u need to register required components with the appropriate EventListeners.
    Liek if u want to get notified when a mouse is clicked, then u need to add The MouseListener to the component which u want to be monitored.
    Say
    myFrame which is the JFrame object which shuld be monitored for the events.
    Then in ur program u have to add following code
    myFrame.addMouseListener( someObectReference );
    Here the someObjectReference should be an instance to a concrete class ..i.e. U write a class like the following
    public class MyMouseListener implements MouseListener {
    // override the followig methods
    public void mouseClicked(MouseEvent me){ sop("MOUSE CLICKED ON THE FRAME");}
    public void mousePressed(MouseEvent me){}
    public void mouseReleased(MouseEvent me){}
    If u dont want to use another class for listening to the events. Then u can make teh current class monitor the events. To do so ur class should implement the appropriate listener and should override the required methods.
    and u should say myFrame.addMouseListenet( this );
    thats it

  • I downloaded google translate and another app that allows you to speak into the microphone and it translates what you said into another language. The microphone on both programs says "speak now" and after I speak it doent do anything. How do I get the mic

    I downloaded google translate and another app that allows you to speak in the microphone and it translates what you said into another language. Both apps say "speak now" into the microphone but when I speak it doesnt do anything. How do I get the microphone to work on these applications?

    What mic/iPod are you using?
    Does the mic work for other apps?

  • How can i get the source code from java concurrent program in R12

    Hi 2 all,
    How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
    Regards,
    Zulqarnain

    user570667 wrote:
    Hi 2 all,
    How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
    Regards,
    ZulqarnainDid you see old threads for similar topic/discussion? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Source+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

    The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

    You must go in the labview option menu, you can select 'use the local
    separator' in the front side submenu (LV6i).
    If you use the "From Exponential/Fract/Eng" vi, you are able to select this
    opton (with a boolean) without changing the labview parameters.
    (sorry for my english)
    Lange Jerome
    FRANCE
    "Nina" a ecrit dans le message news:
    [email protected]..
    > I would like to read a text file in which the decimal numbers are
    > using dots instead of commas. Is there a way of converting this in
    > labVIEW, or how can I get the program to enterpret the figures in the
    > correct way?
    >
    > The program doest enterpret my figures from the text file in the
    > correct way since the numbers contain dots instea
    d of commas. Is there
    > a way to fix this in labVIEW, or do I have to change the files before
    > reading them in the program? Thanks beforehend!

  • How do I get the iTunes program to go to a particlar site to obtain the music that is on an external hard drive

    I have reinstalled iTunes after a small calamity, but I had a backup file of all my music on an external hard drive. Question 1. Where does the program find the music as what has come up is not complete? Question 2. How do you get the program to look in a particular drive for the music that is there?
    Cheers

    Where are you trying to put the folder? At the top level of the volume? That top level is only writable by the system (or an authenticated admin, which is why it's asking for your admin password).
    If you are trying to move into a folder, repeat the "Get Info" on the folder into which you are trying to move. You want to see that your current account has "Read & Write" privileges.
    Yes, third-party NTFS drivers can affect the behavior of volumes they control. (One could say that is the whole point of their existence.) They are supposed to be act just like native volumes, but they don't always succeed. I have no specific knowledge of whether Tuxera NTFS drivers would cause the problems you are seeing; I use a different brand..

  • Just imported clips and edited as new project. closed imovie. came back later and the entire project was gone. i was not done so i did not finalize it. how do i get the program to keep my project in progress

    running imovie on a powermac w 10.6.8. went through the tutorials. imported my clips, got the hang of basic editing, and created a project.
    was pretty happy with it, but needed to shut down and come back to work on it later. when i did come back, the entire project was gone.
    how do i get the program to save my work in progress, without finalizing it?
    thanks

    So, everything worked out just fine!
    I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy! 
    Time info: For about 120 GB of material the codec change process took 25 hours.
    Thanks for your help!
    Best
    *a

  • I won Lightroom 1.0 a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?

    I won Lightroom 1.0 as a door prize a few years ago at an Adobe clinic in Fremont. I have since misplaced the original disk and cannot get the program to open. It wants a serial number and I don't have one. How can I get the serial number so I can use the software?

    Thanks for replying, Jim. I wasn't planning to use it for raw images. I shoot film, black and white, and have many negatives I want to print. I am unfamiliar with the upgrades in Lightroom. I wasn't unhappy with the version I have. It was useful for my purposes.
    Because it was a few years ago, I don't remember if I registered the product. I was able to login to my account. But could not find a path to communicate with Adobe. I will keep trying.
    Ken

  • Student account for Adobe CC - downloaded and worked but only for TRIAL - now asks for license - how do I access the programs? I was given a redemption code (apparently redeemed already). How do I get the licensing code?

    Student account for Adobe CC - downloaded and worked but only for TRIAL - now asks for license - how do I access the programs? I was given a redemption code (apparently redeemed already). How do I get the licensing code?

    Ask whom/wherever you got the redemption code from for one that has not already been used.

  • AVG tried to take over the Firefox Program. I unchecked some stuff on AVG and now Firefox doesn't lool right. There is only a bar at the top of the page with "Firefox" and "new Tab" . How do I get the Firebox homepage back?

    AVG tried to take over the Firefox Program. I unchecked some stuff on AVG and now Firefox doesn't look right. There is only a bar at the top of the page with "Firefox" and "new Tab" . How do I get the Firebox homepage back?

    Google Toolbar Options, in the Search tab, make sure that '''Enable the Google new tab page''' is check-marked. If that doesn't fix it for you, see this for support information about the Google Toolbar. <br />
    [http://www.google.com/support/toolbar/?hl=en] <br />
    Or visit the Google Toolbar forum. <br />
    [http://www.google.com/support/forum/p/Toolbar?hl=en]
    As far as your UserAgent showing Firefox 3.0.11, see this: <br />
    https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    You might want to consider getting rid of that '''desktopsmiley''' program that has messed up your UserAgent, it is known as Malware.

  • How can I get the infoset name by giving the name of a program of a query?

    How can I get the infoset name by giving the name of a program of a SAP Query?
    Regards,
    Subho

    Use FM RSAQ_DECODE_REPORT_NAME.
    You can also use AQLQCAT table.

  • I paid for the annual subscription for lr and ps. when i download the programs it showed me using the trial version which has now expired. how do i get the full program i paid for?

    I paid in full for one year for lr and ps. Both apps show as a trial version and ps is now expired. How do I get the full use of the programs I paid for?

    Moving this discussion to the Adobe Creative Cloud forum.
    Oclan and Cesarguez if you have a valid membership and it is not being authorized then there is likely a connection failure between the computer and our servers.  Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection failure.

  • I have downloaded adobe camera raw 8.7 . Closed all adobe programs . Reopen PS cc6 , it is still using  camera raw 8.2 . How can I get the updated plug in to become active ?

    I have downloaded adobe camera raw 8.7 . Closed all adobe programs . Reopen PS cc6 , it is still using  camera raw 8.2 . How can I get the updated plug in to become active ?

    Please clarify your version of Photoshop.
    There is no CC6.
    There is
    Photoshop CS6
    Photoshop CC
    Photoshop CC 2014
    Also, what is your operating system?

Maybe you are looking for