Dashboard using WAD

Hi Experts,
What are the steps to be followed in the creation of Dashboard using WAD.
Thanks in Advance,
Namrata

Hi Sanchana,
The steps to be followed in the creation of Dashboard using WAD:
1) Open a New Web template in WAD.
2) Define the tabular layout as per the requirements so as to embed the necessary web items.
3) Place the appropriate web items in the appropriate tabular grids
4) Assign queries to the web items (A Query assigned to a web item is called as a data provider)
5) Care should be taken to ensure that the navigation blocku2019s selection parameters are common across all the BEx queries of the affected data providers.
6) Properties of the individual web items are to be set as per the requirements. They can be modified in Properties window or in the HTML code.
7) The URL when this web template is executed should be used in the portal/intranet.
Cheers,
Tanish.

Similar Messages

Dashboards using WAD

Hi All,
I know know how to create dashboards in Xcelsius. And also in SAP BI 7 using WAD we can create dashboards.
My question is how exactly these dashboards differs....
And how to create dashboards in BI 7....
Thanks in Advance.
Trecy

Hi Trecy,
Please fin the below info i had ....this may helps you
http://help.sap.com/saphelp_nw04/helpdata/en/fd/4a7e40417c6d1de10000000a1550b0/frameset.htm
http://help.sap.com/download/netweaver/nw04/visualcomposer/VC_60_SolManGuide.pdf
http://blogs.msdn.com/jbasilico/archive/2008/06/13/effective-dashboard-design-practices.aspx
Regards
Sudheer

Dash Boards using WAD?

Hi All,
Could you please explain the step by step procedure for creating the dashboards using WAD?Is there any other way of creating dashboards in BI?Please share the documents if u have?
Appreciate your help?
Thanks & Regards,
Dinakar.

Hi Dinakar,
This should give you some ideas:
[http://csc-studentweb.lrc.edu/swp/Berg/articles/R&A_2007_Berg_building_cockpits_dashboards_v3.ppt|http://csc-studentweb.lrc.edu/swp/Berg/articles/R&A_2007_Berg_building_cockpits_dashboards_v3.ppt]
[http://csc-studentweb.lrc.edu/swp/Berg/articles/R&A2008_Berg_Dashboards_v5.ppt|http://csc-studentweb.lrc.edu/swp/Berg/articles/R&A2008_Berg_Dashboards_v5.ppt]
Hope it helps.

Request for Dashboards developed using WAD

Hi All,
Please send few dashboards which are developed using WAD in real time, which contains analysis item,container,button,filter etc and if possible please send few screen shots
Thanks & regards
Surendra

Hello Darshak,
The initial question is about WAD basics - that is why I said that. Before posting a question, we should be looking into material which is readily available like SAP Documentation and search the forums.
For basic question about dashboards, I could readily search for numerous threads - some are below.
/thread/430793 [original link is broken]
Dashboards
Edited by: Mayank Gupta on Jun 18, 2008

Acess BW queries using WAD Web Items

Hello Experts,
I have developed a Dashboard in WAD, but now the client wants to use the Analysis and Chart Web items of WAD to jump to another BW queries.
My idea was to associate hyperlinks to the Web Items, but i'm not being able to do that.
Is this interface possible?
Best Regards

Hi
You can write a Java script or XML to jump into the BEx query designer . If you wish not to use RRI functinoality and want a link or any item to jump to the BEx output result
Regards
N Ganesh

Display reports from BW using WAD on blackberry

Hi All,
I have to display reports from BW using WAD on blackberry
can any one please guide me how to do it?
awaiting Reply
Thanks & Regards
Prasad

you have to integrate SAP Mobile infrastrcture with BW system to achive this.

Issue with Parent child dashboards using SWFLoader component

Hello Gurus,
I am using Parent-child dashboards approach in our project.
I have multiple child files embedded in Parent dashboard using the SWFLoader (directly passing the URL as SWFLoader value) to load child dashboards. All the child, parent swf's are saved in the same intranet folders.
When I open the parent SWF, everything loads fine in the intranet.
But for some users, when they open from the intranet, the child dashboard doesnt load up properly or size of the dashboard gets reduced to a small version. (Iam sure that it has nothing to do with the access/privileges)
Any thoughts/ideas what could be causing an issue with child dashboard/resizing of the child dashboard.
Please help!
regards,
S R

Check whether the machine has compatible flash version in error specific machine and your machine.

Comment for a particular cell in the report using WAD

Can some one help me how to write the comment for a particular cell using WAD which will be published on to the portal

Hi Pavan,
In order to modify particular cells in WAD you would need to use the table interface. Refer to this document:
https://websmp104.sap-ag.de/~sapdownload/011000358700000305572005E/HowToTableInterface.pdf
Hope it helps,
Regards,
Nikhil

Error in Dashboard using XML connection

Hi Experts,
I have developed one Dashboard using XML connection but getting bellow attached error can any one guide me how to solve it.
I know that error is related to cross domain.xml please explain the what is cross domain.xml and guide me to solve issue.
Regards
Mahantesh(Monty)

Hello,
Please check if below notes are relevant:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…

Long Texts in BI: displaying in Web report using WAD

Hi, Gurus!
Assumtion is that:
*) user uses EP portal to access BI reports;
*) these reports are pre-formatted, preferably-static, and with print option (maybe via xls or pdf format);
*) Win Gui is NOT an option to use in EP;
Here is the Question:
Is there any ready-made recipe how to get BI reports containing Long Texts on web (most possibly by using WAD - Web Application Designer)?
There are two great blogs by Eugene Khusainov:
*) <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3766">https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3766</a>
*) <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3768">https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3768</a>
These ones deal with this question in Bex WorkBook.
I'm looking for similar solution as in above mentioned blogs, but only for the web (EP). Thus would like to get your opinion before reinventing the wheel.
Thanks a lot in advance for all ideas!
--- Kaspars
P.S. Have gone through several SAP docs, but had not find an exact solution...
P.S.S. in case you have some ready-made-docs, please use the following e-mail: [email protected]

Hi, Prakash!
Thank you for the suggestions! The document you mentioned is a very good as such. However in my case it doesn't seem to be a solution.
Could you please elaborate on your comment regarding "rendering with XSL" ...?
Thanks,
--- Kaspars
NOTE to clarify 'static': I am not looking for a precalculated report/document. It should be like a normal query. But from a users point-of-view it is just a report he/she can ONLY print out. That's it; no drill-downs, no filtering, no nothing.
Wouldn't there be these long texts (texts in several columns, that should be displayed as one column) + header & footer formatting;... Then I could use regular EP iView template (and pure query made in BEx Query Designer as data source within it).
NOTE 2: user just have to click on a hyperlink in EP to access this report. No parameters should be submitted by user.

Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

Hi,
I am using SCOM 2012 SP1
I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the Scope and Counters section. When I try to search for a particular object such as a
port or interface it times out and returns an error. The error is shown below:
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
Support Services for more information.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
languageCode, InstanceQueryOptions instanceQueryOptions)
   at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
   at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
   at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
Has anyone else seen this issue? or can anyone explain what is happening?
Many thanks

Hi,
Asposted earlier,hadt he same problem
when creating a Dashboard widget type
State.
Ones olution I found for this was as follows:
When creating the State widget,the option
to specify the criterion I left blank
and finished the creation of the dashboard.
With that managed to solve the problem.Of course this
is not the solution, or the root cause
of the problem.
I will examine more about this issue, and sohave
the ultimate solution and why such behavior,I post
here.
thank you
Wilsterman Fernandes

How to define roles for the reports that i have created using WAD?

Hi all,
Can anyone let me know how to define roles for the reports generated using WAD. And what is the procedure for creating and defining roles. Is this process take care of Bw consultant nor the basis guys.
Can anyone let me know the entire procedure about the roles in bw 3.5
thanxs
haritha

Following links might helps you
create a role
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/authorizationinSAPNWBI&

Static Header in Tables using WAD ?

Hi, my client request set static header area in Table data using WAD.
any idea for this problem ?
Thank you.

hello,
Apart from Wad Web items
you can use the Head tags inside you WAD HTML Code
Just Type
<h3>You text here </h3>
the above code should come in the <head></head> tag
hope this was helpfull
Regards
Nitin Bhatia
Edited by: Nitin Bhatia on Mar 22, 2010 9:00 AM

Unable to create web reports using WAD in BI 7.0

We are unable to create web reports using WAD in BI 7.0 because of the missing BI metadata. Please take a look at the error below .

didnt see the error??

Cloning and Synchronizing Oracle BI Requests and Dashboards Using CAF

Hi,
Cloning and Synchronizing Oracle BI Requests and Dashboards Using Content Accelerator Framework (CAF)
what is this and in what scenario we use it? Is it useful for webcatalog/rpd migration from one env to other?
Thanks
Jay.

Hi Jay,
CAF is a utility that is used in migration of logical part of RPD and catalog objects from source to target environments. There are bunch of OBIEE bloggers already blogged about this a while ago. Check this article out, it should provide the information you are looking for: ( http://debaatobiee.wordpress.com/2009/11/26/playing-with-cafobiee-content-accelerator-framework/ ).
FYI - If you are working in 11g environment, this tool (CAF) as far as I know is not supported. This tool was introduced by oracle few months before 11g came out which everyone thought would be big on revolutionizing the way migrations are done in OBIEE between environments.
-Amith.

Dashboard using WAD

Similar Messages

Maybe you are looking for