Dashed Line Setting Not Working

I have a graph (I've ungrouped it, it is no longer a graph as far as AI is concerned) that I'm trying to get a dashed line: it doesn't work. I'm uploading screenshots to show I'm not completly crazy.

BTW that is a very small segment of a path?
But if thge Dash feature is not relly working and you do not have two strokes applied to one path then perhaps the preferences are corrupt.
Try this
1. Quit Illustrator.
2.Go to User/username/Library/Preferences/ Adobe illustrator CS6 Settings and trash the settings folder, the whole folder not just the contents of the folder..
3. Start Illustrator. Illustrator creates a new preferences file.

Similar Messages

Dashed line tool not working

When I try to apply a dashed line onto my line in CS4, it creates a dashed line...but not entirely. Where there are gaps, there appears a really really thin black line instead of just space. I'm setting my weight at .25, my miter limit at 4, and my dashed line at 12 pt.
An example of what I mean:

Take the Fill off the line and it should go away.

Purchase Order Goods Receipt quantity tolerance setting not working.

Team,
We are using the IS-Oil solution, ECC 6.0 REL 605 SP LEVEL 009 .
The issue that I have is as follows:
Purchase Order Goods Receipt quantity tolerance setting not working, I had set up a 10% tolerance on QTY received in the GR process via the PIR and also the Purchase Value Key in the material master and also changed the message to a warning in OMCQ for message number M0722.
I had performed a similar configuration and master data maintenance on a different NON IS-OIL client install and it worked fine.
I believe it is the IS-OIL component in the Inventory update portion of the GR process that is causing the error.
I have searched for OSS notes, however they mention that there is no solution.
Setting the PO line item as Unlimited will not be best practice for the business and will not be used.
Has anyone come across this issue? and how was it resolved, your help and guidance will be greatly appreciated.
Thanks

Hello,
Please check the Tolerance levels in O588
Also you can use the BAdI OIB_QCI_ROUND_QTY: A new method, CHECK_TOLERANCE
Best Regards,
R.Brahmankar

Line-in not working with microphone?

Line-in not working with microphone.
I have Mac Mini Intel 1.83 GHz with 10.4.8
I have tried plugging 3 microphones into the line-input on the back, also on my wife's Mac Mini (same model, os), but I cannot get to record into the Mac.
I've been into System Prefs and set input to Line In and slid the Input Volume to high, but nothing.
I know the Microphones work because if I plug them into a Griffin USB/mini jack adaptor and do it that way by selecting iMic USB audio system from the Input in System Prefs all works fine.
But I need to use the mic with the Line-In.
Any ideas why this is not working?

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

Command Sets not working on ACS 5.1

I'm running ACS 5-1-0-44-3.
I have everything running properly on ACS 5.1. I'd like to implement command sets for selected users and groups. Under Access Policies -> Device Admin-> Authorization I have Command Sets selected. The cisco provided is DenyAllCommands. I have this command set running on all groups and every groups is still able to issue any command they wish. I've also created a "show_only" command set that I've issued one group and they are still able to do conf t or any other command.
Am I missing something?
Do you need to reference the command set name under the shell profiles?
Its my understanding that all you have to do is reference it in "Authorization" in the rules under Device Admin.
I can understand a custom command set not working because of user error but DenyAllCommands should work.
Anyone have any ideas?
I have already re-patched the ACS
Stopped and started services.
And it seems like Command Sets is the only not referenced in the logs

I do it a lot
could you paste screnshot of your command set?
I've recently met another issue,
with my command set definition as below (as you can see its very simple):
almost every show is blocked (as suspected) but not "show run" (which is strange for me)

Fcpx magnetic time line is not working

Good day,
I'm trying to make a music video and when I place photos from iphotos onto the time line... the magnetic function does not work. Also, I'm trying to fade up from black at the beginning of the video. I set my transition time to 45 frames... but when I drag Fade to color to the timeline it attached to the audio and on playback it goes from black to a cut of the first video. Any help is greatly appreciated.
Chris

I suspect the audio is on your primary storyline - post a screen grab to confirm.
If your photos have little extensions attaching them to the storyline, you are trying to work with connectecd clips. They don't behave the same as they would if they were in the primary storyline.
Andy

At line selection not working

HI,
at line selection is not working in my program after i used set pf-status. please help.
regards,
ravi.

Hi Ravi,
double click on ur set pf status 'xxx'.
this will give u a user interface screen.
open the function keys button.
u '' find standard tool bar ,,
Recommended function key settings
freely assigned function keys.
in recommended function key settings just type this for f2
Recommended function key settings
F2              PICK         Choose
see that u have the values like this for F2.
save , activate ,
do this ..
regards,
Vijay.
Message was edited by: Vijay

Show Keyboard & Character Viewers setting not working

I like to have access to the Keyboard and Character Viewers in the menu bar; however, the setting on my new MacBook does not work. I have checked the "Show Keyboard & Character Viewers in menu bar" many times and it unchecks itself as soon as I leave the Keyboard tab of the Keyboard setttings in System Preferences.
Could a preference file be corrupted? (I migrated data from my old MacBook (OS 10.7) to my new MacBook (10.9). Perhaps this has something to do with the problem?)
Or, is there a command line way to show the preference that might stick better than the checkbox in the System Preferences?
Any insights would be appreciated.
Thanks,
-Robert.

BikerBob wrote:
The Input Sources menu has to be enabled to show the Keyboard & Character Views menu, which appears under the Input Sources menu. This was not the case in Mac OS 10.7, which I was previously using.
However, it is odd that the Keyboard & Character Views option is not greyed out in the Keyboard tab when the Input Sources menu is not enabled.
Indeed, the way Apple has done this in Mavericks seems both odd and cumbersome. I think it would be worth telling them so at
http://www.apple.com/feedback
The official instructions assume you have already enabled the input sources menu:
http://support.apple.com/kb/PH13746

IPhone 6 Battery Usage setting not working.

When I go to my setting and check my Battery Usage setting it states: "Battery information will be available after using iPhone for a few minutes". I've been using it for hours and I get the same response when I go to the setting. I've turned off my phone multiple times to see if that would resolve it, but it hasn't. Is anyone else experiencing this behavior?

Hello.
I have the same problem. iPhone 5, iOS8.0.2, used for a few days - still no usage statistics, only "Battery information will be available after using iPhone for a few minutes".
I tried restore iPhone (DFU) without restoring backup from iCloud/iTunes, resets, hard-resets, erase all settings, drain battery to 0% and charge to 100% overnight etc. - nothing helps.
I wrote to the Apple about this problem.
Here is the page that you can use to contact with Apple and report a bug - https://www.apple.com/feedback/iphone.html
Please, give the title of "iOS8 battery usage statistics not working" (or something like that), choose the "Bug report" and describe the problem. Perhaps it will make that Apple will eliminate this problem in the next version of iOS. More report - greater chance.
Regards

ACS 5.3 - comman sets not working

We installed ACS 5.3 on Vmware -cent os , and a cisco router is configured to authenticate to this TACACS+ server ,
i am able to login to router using the specified TACACS username ./ password and able to see the hits also as below in the policy ,
But the Command sets are not working as definded, pls help me to find the problem..
Filter:
StatusNameIdentity GroupNDG:LocationNDG:Device TypeTime And DateCommand SetsShell ProfileHit Counts
Match if:
EqualsNot Equals
EnabledDisabledMonitor Only
Status
Name
Conditions
Results
Hit Count
Identity Group
NDG:Location
NDG:Device Type
Time And Date
Command Sets
Shell Profile
1
RO ACCESS
in All Groups:READ ONLY ACCESS
in All Locations
in All Device Types
-ANY-
READ ONLY POLICY
RO SHELL
10
2
RESTRICTED ACCESS
in All Groups:RESTRICTED ACCESS
in All Locations
in All Device Types
-ANY-
RESTRICTED USER POLICY
Permit Access
1
3
SUPER ADMIN ACCESS
in All Groups:FULL ACCESS
in All Locations
in All Device Types
-ANY-
PERMIT ALL POLICY
Permit Access
0

Logs for such a RO-read only user login
AAA Protocol > TACACS+ Authentication Details
Date :
August 27, 2012
Generated on August 28, 2012 7:13:37 AM UTC
Authentication Details
Status:
Passed
Failure Reason:
Logged At:
Aug 27, 2012 12:18 PM
ACS Time:
Aug 27, 2012 12:18 PM
ACS Instance:
acsserver
Authentication Method:
PAP_ASCII
Authentication Type:
ASCII
Privilege Level:
15
User
Username:
muthu
Remote Address:
172.20.1.25
Network Device
Network Device:
Default Network Device
Network Device IP Address:
192.168.251.26
Network Device Groups:
Device Type:All Device Types, Location:All Locations
Access Policy
Access Service:
TAFE POLICY1
Identity Store:
Internal Users
Selected Shell Profile:
RO SHELL
Active Directory Domain:
Identity Group:
All Groups:READ ONLY ACCESS
Access Service Selection Matched Rule :
Rule-2
Identity Policy Matched Rule:
Default
Selected Identity Stores:
Internal Users, Internal Users
Query Identity Stores:
Selected Query Identity Stores:
Group Mapping Policy Matched Rule:
Default
Authorization Policy Matched Rule:
RO ACCESS
Authorization Exception Policy Matched Rule:
Other
ACS Session ID:
acsserver/132692348/212
Service:
Login
AV Pairs:
Response Time:
4
Other Attributes:
ACSVersion=acs-5.3.0.40-B.839
ConfigVersionId=97
Protocol=Tacacs
Type=Authentication
Action=Login
Port=tty194
Action=Login
Port=tty194
UserIdentityGroup=IdentityGroup:All Groups:READ ONLY ACCESS
Authentication Result
Type=Authentication
Authen-Reply-Status=Pass
Steps
Get TACACS+ default network device setting.
Received TACACS+ Authentication START Request
Evaluating Service Selection Policy
Matched rule
Selected Access Service - TAFE POLICY1
Returned TACACS+ Authentication Reply
Get TACACS+ default network device setting.
Received TACACS+ Authentication CONTINUE Request
Using previously selected Access Service
Evaluating Identity Policy
Matched Default Rule
Selected Identity Store - Internal Users
Looking up User in Internal Users IDStore - muthu
Found User in Internal Users IDStore
TACACS+ will use the password prompt from global TACACS+ configuration.
Returned TACACS+ Authentication Reply
Get TACACS+ default network device setting.
Received TACACS+ Authentication CONTINUE Request
Using previously selected Access Service
Evaluating Identity Policy
Matched Default Rule
Selected Identity Store - Internal Users
Looking up User in Internal Users IDStore - muthu
Found User in Internal Users IDStore
Authentication Passed
Evaluating Group Mapping Policy
Matched Default Rule
Evaluating Exception Authorization Policy
No rule was matched
Evaluating Authorization Policy
Matched rule
Returned TACACS+ Authentication Reply
Additional Details
Diagnostics ACS Configuration Changes

Working Sets not working

Has anyone got Working Sets to work with Flash Builder 4.5 for PHP as described here:
http://help.adobe.com/en_US/flashbuilder/using/WSc5cd04c102ae3e97bf51ac512e1410bae5-7ff6.h tml
I created an entirely new workspace to see if that might be the issue, but it was not.
I created a ticket.
https://bugs.adobe.com/jira/browse/FB-31092
Edited: Somehow the above bug either wasn't saved or got deleted. Here is the new link: https://bugs.adobe.com/jira/browse/FB-31189

I found a workaround. After Flash Builder for PHP loads, close the Package Explorer that has the broken working sets. Then open it back up by going to Window --> Show View --> Package Explorer.

Multiple headphone sets not working?

I just recently received a replacement iPod Nano because my last one glitched itself and wouldn't respond to anything a consultant had me do. It's worked great since I got it. The last time I listened to it was Friday [the 6th], and the headphones worked just fine. Today [the 8th] I went to listen to it, and sound only came out of the left speaker. At first, I thought that it was only the headphones, and I just needed a new pair. Well, I went to use another pair I had [for an Mp3 player] and once again, sound came out through just the left speaker. That's two sets that would not work for the right headphone speaker. Could anything be wrong inside this iPod? Is there anything I can do to fix it? I would rather not have to have it replaced, since this IS a replacement iPod.
Thank you for any help!

Your headphone jack in the iPod is broken, you will need to get it replaced. You don't wrap your headphone cord around your iPod while it is plugged in, do you?

Smartform : line type not working fine when used on Next page

Hi ,
Please help on below :
I have a smartform and have line type which is used in printing the items.
When I use this line type on very first page , it works fine.
But for the next page which is the exact copy of first page ,
the line type does not work fine with printing first line item on next page,
it refreshed the work area which i am printing. so on the next page very first element gets all the values 000
But on the next iteration it works fine and does not refresh work area.
Please see why is such abnormal behavior happening.
Regards,
Uma Dave

Hi Ameya
there might be syntax error. Try to get what exaclty is an error using following code.
CALL FUNCTION <smartform>
    EXCEPTIONS
    IF SY-SUBRC 0.
       CALL FUNCTION 'SSF_READ_ERRORS'
            IMPORTING
                 ERRORTAB = IT_ERRORLIST.
     ENDIF.
In IT_ERRORLIST you will get error message.
Regards
Sachin G Patil

Urgent:output for line item not working

hi
we are trying to get the output at item level in the sales order.we click on the line item and give a print out..but it is showing details of other line items as well. is there a ways we can get a printout for only the selected line items.
what we did.
1. maintained a output type for item category
2. assigned the output type tot he item category.
but still this is not working the way we want. do we need to use a different print program for the item level printing...
Pls reply soon we are goin live in 2 days with ur contact no....thanks...

Hi,
I think this is not possible through standard, but I can suggest if you can seek help from your technical guys asking if it is possible through output routines what we maintain in the output determination procedure....
Give him the requirement and ask him if he can create a custom routine for this.....
Hope this will help you........
Regards
Bageerath

Sound input (line-in) not working after upgrade to Leopard

I have upgraded my iMac Intel Core 2 Duo (white plastic frame version) to Leopard on Friday when it released. The upgrade process went very well with one MAJOR exception: Audio input through "Line-in" connection does not work anymore. I have tried everything that comes to mind so far from rebooting, to unplugging and replugging, to checking back all system settings, etc. Nothing works. At this point, I can't use my headset anymore for making calls with Skype or using voice chat in games. I would seriously need some help as I refuse to have paid $129 only to have Apple themselves break something in their products.
For this reason, I have to currently consider Leopard a failure. Reason being, in MS Windows or Linux, there always is a way around to make things work... I can't find anything at all with this release of the OS.

The OP reported their line-in input "broke" after upgrading to Leopard, however my MBP stopped recognising input from the mic on my headset a few weeks ago when I was still running Tiger. This might possibly indicate that the change in OS X's handling of the line-in input was present in a Tiger update, but I can't remember the exact correlation between the dates of my last update and this problem. All the same, I'm pretty annoyed that a headset that worked perfectly for several months is now suddenly unusable without a USB adapter.
Prior to stumbling across this thread, I visited two Apple stores, who both tested with an output from an iPod and told me that the input was working fine, leading me to buy a brand-new headset (even though I'd tested other working headsets without success) which, naturally, produced the same results.
Seems to me that the hardware is fully capable of processing a mic input through the line-in port, as it's never had any problems with any unpowered source until recently, so Apple must surely be able to undo the change they made?

Dashed Line Setting Not Working

Similar Messages

Maybe you are looking for