Dashed line tool not working

When I try to apply a dashed line onto my line in CS4, it creates a dashed line...but not entirely. Where there are gaps, there appears a really really thin black line instead of just space. I'm setting my weight at .25, my miter limit at 4, and my dashed line at 12 pt.
An example of what I mean:

Take the Fill off the line and it should go away.

Similar Messages

  • Dashed Line Setting Not Working

    I have a graph (I've ungrouped it, it is no longer a graph as far as AI is concerned) that I'm trying to get a dashed line:  it doesn't work.  I'm uploading screenshots to show I'm not completly crazy.

    BTW that is a very small segment of a path?
    But if thge Dash feature is not relly working and you do not have two strokes applied to one path then perhaps the preferences are corrupt.
    Try this
    1. Quit Illustrator.
    2.Go to User/username/Library/Preferences/ Adobe illustrator CS6 Settings and trash the settings folder, the whole folder not just the contents of the folder..
    3. Start Illustrator. Illustrator creates a new preferences file.

  • Creative cloud photoshop blur tool not work as it should be

    creative cloud photoshop blur tool not work as it should be !
    I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
    and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
    I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
    at least it not bluring enough to see any major changes.
    the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
    (note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
    just need advise not to share system specs.
    and thats what this forums board is for getting advice and read what others say about the issue at hand.
    it's not to post or share system specs  !!!
    so with that out of the way I need advice only please ?

    Hi,
    It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
    If you zoom to 100% do you see any change when using the blur tool?
    What are the pixel dimensions of the image?
    (Image>Image Size)
    If you try a small image, does the blur tool work?
    What about when you use the mouse instead of your tablet?
    Can you at least tell us what operating system and version of photoshop your using?

  • Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

    Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
    -CharlieH23

    Copy and paste only this area, you may have to scroll down.
    Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 2494 MHz
    Built-in memory: 6019 MB
    Free memory: 3360 MB
    Memory available to Photoshop: 5227 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenCL Version: 1.2
    OpenGL Version: 2.1
    Video Rect Texture Size: 16384
    OpenGL Memory: 2112 MB
    Video Card Vendor: Intel
    Video Card Renderer: Intel(R) HD Graphics 4000
    Display: 1
    Display Bounds: top=0, left=0, bottom=768, right=1366
    Video Card Number: 1
    Video Card: Intel(R) HD Graphics 4000
    Driver Version: 10.18.10.3958
    Driver Date: 20140930000000.000000-000
    Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
    Video Mode: 1366 x 768 x 4294967296 colors
    Video Card Caption: Intel(R) HD Graphics 4000
    Video Card Memory: 2112 MB

  • Line-in not working with microphone?

    Line-in not working with microphone.
    I have Mac Mini Intel 1.83 GHz with 10.4.8
    I have tried plugging 3 microphones into the line-input on the back, also on my wife's Mac Mini (same model, os), but I cannot get to record into the Mac.
    I've been into System Prefs and set input to Line In and slid the Input Volume to high, but nothing.
    I know the Microphones work because if I plug them into a Griffin USB/mini jack adaptor and do it that way by selecting iMic USB audio system from the Input in System Prefs all works fine.
    But I need to use the mic with the Line-In.
    Any ideas why this is not working?

    The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
    That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

  • Converting WordPerfect to PDF with desktop printer tool: Not working

    I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.

    Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
    Please help again and soon, :).
    Date: Tue, 7 Jan 2014 11:52:08 -0800
    From: [email protected]
    To: [email protected]
    Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
        Re: Converting WordPerfect to PDF with desktop printer tool: Not working
        created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
    Please do following
    (A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
    Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
    (B). If you have not installed Adobe Postscript driver yet then please install one as below:
    How to Install PS printer:
    1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
    2. Select "Add a local printer"
    3. Select "Use an existing port: LPT1: (Printer port)
    4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
    Adobe PS driver files:
    http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
    (C) Go to the printer configure port and verify your Adobe ID and password
    1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
    2. Click right mouse to open “Printer properties”.
    3. Select “Ports” tab
    4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
    5. Click “Configure Port…” button at the bottom
      http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
    When printing to PDF you will see below and an email is delivered to your email inbox.  The converted PDF file will be stored at https//files.acrobat.com.
      http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
    Thank you
    Hisami
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Content aware move and extend tool not working in PSE12

    Photoshop Elements 12 content aware move and extend tool not working with Yosemite upgrade.

    Have you deleted the preferences and the saved application states?
    A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

  • CS5 Refine Edges tool not working how its suppose to

    Hello everyone - well I like the title says refine edges tool not working right -
    I open an image in photoshop - make a quick selection of a part of the image and then go into refine edges - Click on smart radious and when I use the brush to get a better selection that part becomes transparent - I tried seaching everywhere for an answer but noone seems to know
    Thank you

    Could you please post a screenshot with the pertinent Panels visible?
    The videos you might have seen might simply be using images that lend themselves to the task better than your image.

  • Adobe XI - Hightlight text tool not working

    Just downloaded adobe XI and the hightlight text tool not working.  How can I get this to work.

    I guess you can always use the box tool in drawing markups to draw a box around the text then play with the colors until you get close to what you want.
    The only thing I don't like about that (besides it being a PITA) is that it covers the text with color as well where the highlight tool does not.

  • Shape Builder tool not working on shapes in a clipping mask

    Hello again,
    Why is the Shape Builder Tool don't work on shapes inside a Clipping Mask? The Pathfinder does work but for the Shape Builder Tool: NADA!
    Thank's for answering,
    Lindberg

    Hi,
    Thank you for answering. No it will work correctly. The Pathfinder work inside a clipping path and in any situation but not the Shape Builder Tool. Unless this is normal, I think that the specialist at Adobe should have a look at this annoying behavior and try to release an upgrade with this behavior corrected in a near futur.
    Thank’s again for answering,
    Robert Marchand
    [email protected] <mailto:[email protected]>
    Le 8 avr. 2015 à 10:41AM, Larry G. Schneider <[email protected]> a écrit :
    Shape Builder tool not working on shapes in a clipping mask
    created by Larry G. Schneider <https://forums.adobe.com/people/LarryG.Schneider> in Illustrator - View the full discussion <https://forums.adobe.com/message/7418340#7418340>
    If you release the Clipping Mask and try the Shape Builder tool then, does it still balk at making the shape?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7418340#7418340 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7418340#7418340
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • Visual admin tool not working

    hii guys,
    in my netweaver system visula admin tool not working .when ever im trying to connect with user id and password its showing like this.how can i solve this issue.plz help me

    Hi,
    Try to login to system info page with administrator or j2ee_admin for java and dual stack respectively to check if the password is correct.
    If the password is incorrect, then check if you have any alternate admin ID. Change the administrator or j2ee_admin password, then try to login with the new password. Change the password of SDM and securestore to the new one.
    If this is not the case, then check the log files in visual admin directory. Please post the same.
    Cheers...,
    Raghu

  • Selection and Type Tools not working in InDesign CC for Mac

    I have just recently downloaded InDesign CC (I use Mac OSX.9.2) and got the World Tools plugin to typeset in different languages.
    However, I am having trouble using the selection and type tools. In about the first half of the file, the type tool displays the pointer/dashed box/I-beam icon and doesn't put the cursor in the text when I click on it. I can't click to select text as I should be able to, and if I try to click and drag, all I do is end up creating another text frame. But in about the second half of the file, the selection and type tools work the way they should.
    When I click and hold on the type tool, the cursor changes to the crosshairs icon for creating text frames and the "W: H: " dialogue box for text frames appears.
    How can I get the tools to work properly in the entire document? Is anyone else having this problem?

    @Cindy – usually all 3rd party developers will provide some information for installing and uninstalling their products. First see if you can find some information on their web sites.
    Also there should be a dedicated Adobe Extension Manager app where you can look up the installed parts of InDesign. Since I do not have InDesign CC installed, I do not know exactly, but its name should be something like "Adobe Extension Manager CC".
    If you start this app it will show all parts installed with InDesign (or other apps that are installed).
    Usually at the bottom of the list are the 3rd party installed components. They do not state "Adobe Incoroprate System" as author. Never uninstall (remove) the Adobe ones!
    Here a screen grab from my German Adobe Extension Manager CS5:
    If you select one, a new option is available at the right. In my case here the "Entfernen" button ("Remove" in English).
    Uwe

  • Help! InDesign CS6 tools not working

    Hello,
    I recently upgraded to CS6 on my PC and have run into some issues with InDesign. None of the tool buttons in the top ribbon or on my side menu function properly. For example, if I make a text box and wish to change the font, I can't select the font drop down menu, nor can I change the size of the type. This also happens when I create a shape and want to change size, color, line weight, line type, etc. Pages do not work either and I have had to use the bottom page navigation.
    I have tried uninstalling and reinstalling, but the problem did not go away. Any thoughts or suggestions?  Thank you!

    Windows 7? See InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)

  • At line selection not working

    HI,
    at line selection is not working in my program after i used set pf-status. please help.
    regards,
    ravi.

    Hi Ravi,                                                       
    double click on ur set pf status 'xxx'.
    this will give u a user interface screen.
    open the function keys button.
    u '' find standard tool bar ,,
    Recommended function key settings     
    freely assigned function keys.
    in recommended function key settings just type this for f2
    Recommended function key settings    
    F2              PICK         Choose                                                                               
    see that u have the values like this for F2.       
    save , activate ,
    do this ..
    regards,
    Vijay.
    Message was edited by: Vijay

  • TouchUp Text Tool not working?

    I have Max OS X 10.4, Acrobat 8.1.2 and cannot get the TouchUp Text Tool to work? Can select text and delete/copy/paste etc but cannot add/change/modify any text from the keyboard? All keyboard text keys not working or changing data?
    Was using Acrobat 7 and it worked great, however this version is just not cooperating.
    Any suggestions would be greatly appreciated...
    Thanks,
    Ron

    I talked to a very helpful person at Adobe Acrobat Tech support yesterday (Tony) and I *think* I have the problem resolved. [BTW, I don't see any definite mentions to this here: during this problem I was able to delete (using either of the delete keys) text and I was able to hit 'return' to get to a new line - while using the touch-up text tool. Also, I was able to create a new blank document and type in next fine too.]
    After troubleshooting all the possible causes with Tech support (including manually trashing all the /user/library/preferences/acrobat (folder) and all the com.adobe.acrobat ..(8) preferences in the /user/library/preferences folder - and after reinstalling Acrobat 8 - the issue still wasn't fixed. I called back Tech Support and got the same person (Tony) and with him still on phone, I created a new user on my Mac -- recreated the text touch-up tool problem and Acrobat 8 worked just like it was supposed to do. -- so ... the problem was in my 'old' user account & probably a font problem.
    Tony the Tech transfered me over to a Font Tech at Adobe (who was a rude, nasty s-o-b who barely spent 2 minutes with the problem, but that's IMHO) who told me the only resolution, since in his opinion I had a corrupted User account, was to trash my current User account on my system and start fresh -- no alternative! Since that wasn't acceptable to me, and since the Font Tech could or would not give me a straight answer about transferring fonts from my User/Library/Fonts to the computer (root, not system) /Library/Fonts and working on Acrobat that way .... or fixing any font problems in my current /user/fonts -- ..... I hung up the phone and resolved to track this down myself (with the help that was already given to me by Tony the Acrobat Tech.
    The first thing I tried this morning was to see if the Acrobat 8 text touch-up 'bug' was still happening -- and it was.
    So I spent the rest of this morning validating fonts and deleting duplicates -- (you know how those nasty duplicate fonts just appear even though you think you have them all removed a month or so ago). I also moved all my Adobe otf fonts over to my /Library/Fonts and deleted those same fonts from my /User/Library/Fonts.
    I just fired up Acrobat 8 and tried the text touch-up tool --- and it works fine! No problem at all.
    Final answer (at least for me) is --> validate all your fonts. I used Font Book (Mac OS) to do this. Delete any major errors on fonts you can live without. Some of the warnings you get (on the critical errors and caution warning both are confusing: 'name' table warning, for example. I did find an Apple Developer document that explains (to a small degree) what these mean: http://developer.apple.com/textfonts/TTRefMan/index.html
    Definitely delete every duplicate font you find. I kept some non-duplicated fonts with minor warnings, but these fonts wouldn't be used in Acrobat anyway.
    I don't know if moving the Adobe otf fonts to my root /Library/Fonts helped or not since I didn't do a test of this prior to any validation on my user/font file. It was just one step in my bug fix.
    Let me know if this works for you all too.
    -- Susan

Maybe you are looking for

  • SP4 and Form Based Authentication

    Hi, I had just advised a customer to apply SP4 to WLS and then plug in the 'source code' patch, he replied that he had been informed that SP4 breaks Form Based Authentication for war web apps? Can anyone confirm/deny this for me please ? regards,    

  • Connecting Soundblaster Audigy 2zs to Home Theater Amplif

    Can I connect my Soundblaster Audigy 2zs directly to an amplifier and still get 5.,6.,or7. speaker setup? I feel it's kind of redundant to use a reciever when the Audigy has all the capabilities of a Home Theater Reciever. And it outputs sound at 92k

  • LSMW F-22

    Dear All, I am fresher in ABAP working for a University, where we want to upload security deposit for each student. We do it manually through F-22 (Enter Customer Invoice), for this we have created a LSMW but not able to upload any data. Import metho

  • Web service test client

    I need to write a tool for internal web service testing, like the one wls admin console has. But I need the tool to run separately, meaning from app, either using jsp, servlet or jpf. How can I access the web service? Do I have to generate client jar

  • How do i designate tray 1 to envelopes only?

    I never use tray 1 for anything but envelopes.  It's a pain to have to remove them every time I need to pint a letter size.  Is there a way to designate tray 1 specifically for envelopes? Trisha