DasyLab. Modules, Black Box, Navigator frame doesn't appear when app runs

Hello,
I have version 11 or DasyLab and am running Windows 7 Pro.  When I launch DasyLab (as an Administrator) the Modules, Black Box and Navigaor frame briefly appears as long as the splash screen is loading DLL's.  Once DLL's are loaded the Modules, Black Box and Navigaor frame goes away.  
I try pressing ctrl+M but to no avail.
Can anyone help?
Thanks,
Alan Jones
Vancouver, BC

If you go to the view menu ... can you enable those panes? 
If not, try editing the DASYLab.INI Configuration file, and delete the [Panes] section (only that section).
The INI file is in the Public User Document folder
C:\Users\Public\Documents\DASYLab\13.0.0\eng
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Similar Messages

  • The navigation menu does not appear when published to folder and my 12 photos are not on the site either

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John
    Message was edited by: BOURBAH

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • The navigation menu does not appear when published to folder and my 12 photos arenot on the site eitherr

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • Photo doesn't appear when a contact calls until after answer (iOS 7)

    When I recieve a call from a contact the photo (sync'd with Facebook) doesn't appear when the phone is ringing. Once answered the photo appears on the in call screen. I'm sure it appeared whilst ringing in iOS 6?

    I have this same problem with SMS, recent calls, vm, etc. it started after i re-synced my contacts form MoblieMe and I can't seem to get it to recognize the number as a saved contact.

  • The mark of increasing volume doesn't appear when i use the back light key

    the mark of increasing volume doesn't appear when i use the back light key

    Hi,
    Please write your notebook product number (p/n), which system are you using and country of purchase.
    Resource:
    How to Locate the Notebook product number (p/n)
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard.  When I run the Snow Leo install it errors saying I need OS 10.5 to run the install.  How do I get around this?  I've read that it's possible to go direcectly from 10.4 to 10.6.

    I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard.  When I run the Snow Leo install it errors saying I need OS 10.5 to run the install.  How do I get around this?  I've read that it's possible to go direcectly from 10.4 to 10.6.

    To buy a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f
    Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088

  • Keyboard doesn't appear when trying to type into Numbers cell

    I'm having a strange problem trying to use the latest Numbers app on my iPad 2,.
    I opened a new spreadsheet but the virtual keyboard doesn't appear when I try to enter text in a cell.  I can only get the "Paste" option.  When I hit that, it enters text I'd cut and pasted from a NY Times article into a Facebook post two days ago.  I thought that I'd just paste it then delete that column later but when I move to the next column, the same "Paste" option appears.
    I can title the spreadsheet; I just can't type into the body of the spreadsheet.  The spreadsheet and cells aren't locked.
    I've been using the latest version of Numbers on my desktop with no issues at all.  I have no idea why this is happening.  Any suggestions?  Thanx.

    Hi William,
    Things are working the way the were intended to. A single tap on a cell brings up the Cut/Copy/Paste/Delete/Fill/Comment menu. A double tap brings up the input screen. If the cell is formatted as text you will get the text keyboard right away. If formatted as a date or number then those screens show. You are given the option to change the data type here. If you are in a form you will be ruled by the format and unable to change it there.
    quinn

  • Iphone4s keyboard doesn't appear when I add a new contact after receiving a call

    iphone4s keyboard doesn't appear when I add a new contact after receiving a call

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Photo transfer App doesn't appear when SD card inserted with camera connection kit  to iPad 2

    Photo transfer app doesn't appear when the SD card is connected to iPad 2 using the camera connection kit. I also tried connecting the camera directly to iPad using that adaptor as well as no app appears.

    You should see something like this on your iPad screen

  • HT5278 i did this update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though! ne1

    i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?

    I have had this happen to me on 3GS, 4 and 4s.   Usually the solution is one of the following:
    1-  If  your volume indicator says  headphones even though they are not plugged in, then:
    Stick your headphones into the headphone jack and then remove quickly.
    2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
    3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
    Hope one of these works for you

  • I have a black border (picture frame) on my tv when I watch netflix using hdmi connecter with ipad 2 how do I get rid of it?

    How do I remove a black border around the picture when watching netflix on my hd tv with hdmi connecter on ipad 2? When I first watch the picture is fine but after around 20-30 minutes the picture shrinks and a black border (picture frame) appears it's a 47" tv with a 23" picture.

    Play with the Aspect Ratio button on your TV Remote Control e.g. 16:9, 4:3 or stretch

  • Why when I download an App from iTunes, this app doesn't appear in App section of my iDevice?

    Help please!!!!!!!    
    I don't understand why!!!
    I think it's iTunes 10.5.2.11 because with the previous versions this problem didn't happen
    Problem Example:
    ~ Connect the iDevice
    ~ Open iTunes and click on the iDevice name
    ~ Go on App section
    What do you see is your iDevice, with all your apps that looks like your iDevice
    After downloading an App from iTunes store, this app doesn't appear on the image of my iDevice (on iTunes - App section)!!
    This app appears only after i click Synchronize, and if i don't want install the app just downloaded I must abort the synchronization and then remove the app that I don't want to install!!
    Sorry for my english!!

    Newly downloaded apps will appear in the column on the left. The images on the right show what is installed on the device. Perphaps the logic has changed slightly with older builds also including what would be synced as well. Untick the box that says Automatically sync new apps and you can choose whether or not to include a new app instead of syncing, then removing.
    tt2

  • SPED output type doesn't appear when goods issue done

    I have made goods transfer from one storage to another via two-steps procedure. Both storages have WM.
    So I create UB order (Me21n) -> outbound delivery -> transfer order. Then I approve the transfer order and the goods issue is done automatically. In this moment SPED output type has to appear in outbound delivery and to create inbound delivery.
    SPED settings are:
    dispatch time - 4 (Send immediately  when saving the application)
    transmission medium - 8 (special function)
    req. routine - 408.
    The problem is that after goods issue done via transfer order approving I haven't SPED in outbound delivery. I need to open the delivery to change (SPED appears) and save it. Can it be solved by any standard method or only by ABAP?

    Hello Mihailo
    Thank you for your answer.
    I think so too but I hope it can be another way. It's really strange situation because I see that the delivery status is updated after the goods issue. So the devilery is re-saved. But the output document doesn't appear.
    How you solved it in your expirience via change the delivery in background by ABAP or via any new req. routine?

  • Spotlight doesn't appear when I click on it or when I use the cmd space....

    All of a sudden it stops coming up. ??????

    I'm having the same problems. Spotlight doesn't respond when I click on its icon in the menu bar, and splat-space highlights the icon but doesn't open any windows.
    If I click on a Finder window and hit splat-F I can open a finder window but it appears it stopped indexing a while ago because I don't see any new info. I've deleted the index and it's reindexing now, but no change in the Spotlight icon behavior.
    I have Now-Up-to-Date as well, and I'm running the current version, but I'm a bit nervous about deleting that startup folder without knowing what that will do. If that simply removes the icon from the menu bar I'm fine with that.
    Spotlight does occasionally work. I don't know why but it'lll suddenly kick into gear. These days, though, it's not available 95% of the time, which is a bummer as I really like it and used it a lot.

  • Ipod appear in my computer when disconnected, doesn't appear when connected?

    It's impossible to add songs to my ipod because when i connect the ipod the taskbar says it's connects however it doesn't appear in itunes or in "my computer". In addition to that it takes million and a half years to eject it from the task bar. I've managed to disconnect it properly maybe twice. at first i thought it was that the drivers need to be reinstalled. but after waiting for an entire day for it to respond i disconnected it improperly and suddenly the ipod icon appeared in my computer and actually stayed there for a while while the ipod was disconnected. as soon as i reconnect it the ipod disappears. im thinking the computer is slow to respond to it since it immediately opens itunes when i disconnect it after waiting for hours.

    The USB host controller maybe hung by the Antivirus or a slow CPU, with low RAM.
    Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC. (don't use USB hub or the USB port at the front of your PC).
    When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    Good Luck!

Maybe you are looking for

  • SQL query problem - select max (case... aggregate function)

    Hi, I have a problem with below sql query, it gives me problem/error message 'ORA-00937: not a single-group group function', why? select sag.afdeling, sag.sagsnr, to_char(sag.start_dato, 'yyyy-mm-dd'), sag.stat, BOGF_TRANS.TRANSTYPE, max (case when B

  • How to use INNER JOIN in such case

    when i program as below[CASE1]. the code is able to active. CASE1: ========================== DATA: WK_BUKRS LIKE T001-BUKRS,       WK_BUTXT LIKE T001-BUTXT,       WK_TABLE(4) TYPE C VALUE 'T001'. START-OF-SELECTION.   WK_BUKRS = 'DECN'.   PERFORM GE

  • How do I see the messages of iMessage on my phone?

    How do I see the conversation of iMessage that are started on my computer on my phone?

  • Can not find Maverick 10.9 on apple site

    Hello, I have just replaced my HD on my 2009 Macbrook Pro and it is running nice. I want to upgrade my OS Leopard but I can not locate Maverick 10.9 which is required. Some off my applications say that I need this update in order to run. I can sure u

  • There are colors on the screen when I try to take a picture. Please help.

    Hi, I'm not sure if I'm in the right community but when I try to take a picture I look at the screen and it has a white line going through the top part of the screen. There are white spots all over the lens. There is blue and red parts in the camera.