DAT Drive not registering on sunfire V240

Hi,
I have 9 SUN v240 with which i connected the same DAT drive HP 72GB DDS DAT (PART NUMBER C7439). In six servers
did devfsadm and it registered the DAT. It worked fine but in three of the SUN v240, this command doesnt seem to
do anything. /dev/rmt is not created. I cannot restart the server because they are live/production servers. Is there
any other solution to get this DAT recognised in solaris with out a reboot. Also, i cannot go to OBP (OK prompt) because
ofcourse it needs a reboot.
I checked the st.conf file and the entries of these file are the same in all 9 v240. So i think its not a problem of
st.conf.
Eargerly waiting for a solution.
Here are some of the command outputs from 1 of the 3 servers which donot see the DAT:
[root@vbsmf /kernel/drv] $strings /kernel/drv/st.conf | grep st
# Copyright (c) 1995-2000 by Sun Microsystems, Inc.
"@(#)st.conf
# devices of Sun Microsystems and many 3rd party devices.
# 1 Drive is configured automatically - no entry is needed in st.conf.
# The 3rd party devices do apparently work with the configurations listed.
# the past, but have not been tested by Sun Microsystems. Use these entries
# as your starting point for generating your configuration entries.
#tape-config-list=
name="st" class="scsi"
name="st" class="scsi"
name="st" class="scsi"
name="st" class="scsi"
name="st" class="scsi"
name="st" class="scsi"
name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
#name="st" class="scsi"
name="st" parent="fp" target=0;
[root@vbsmf /kernel/drv] $cfgadm configure
Ap_Id Type Receptacle Occupant Condition
configure: No matching library found
[root@vbsmf /kernel/drv] $cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 CD-ROM connected configured unknown
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected configured unknown
c2 scsi-bus connected unconfigured unknown
[root@vbsmf /kernel/drv] $cfgadm configure c2
Ap_Id Type Receptacle Occupant Condition
c2 scsi-bus connected unconfigured unknown
configure: No matching library found
[root@vbsmf /kernel/drv] $cfgadm -val
Ap_Id Receptacle Occupant Condition Information
When Type Busy Phys_Id
c0 connected configured unknown
Jan 1 1970 scsi-bus n /devices/pci@1e,600000/ide@d:scsi
c0::dsk/c0t0d0 connected configured unknown unavailable
Jan 1 1970 CD-ROM y /devices/pci@1e,600000/ide@d:scsi::dsk/c0t0d0
c1 connected configured unknown
Jan 1 1970 scsi-bus n /devices/pci@1c,600000/scsi@2:scsi
c1::dsk/c1t0d0 connected configured unknown FUJITSU MAT3073N SUN72G
Jan 1 1970 disk n /devices/pci@1c,600000/scsi@2:scsi::dsk/c1t0d0
c1::dsk/c1t1d0 connected configured unknown FUJITSU MAT3073N SUN72G
Jan 1 1970 disk n /devices/pci@1c,600000/scsi@2:scsi::dsk/c1t1d0
c2 connected unconfigured unknown
Jan 1 1970 scsi-bus n /devices/pci@1c,600000/scsi@2,1:scsi
[root@vbsmf /kernel/drv] $ls /dev/rmt/0
/dev/rmt/0: No such file or directory
[root@vbsmf /kernel/drv] $ls /dev/rmt
[root@vbsmf /kernel/drv] $devfsadm -v
[root@vbsmf /kernel/drv] $ls /dev/rmt
[root@vbsmf /kernel/drv] $ls /dev/rmt/0
/dev/rmt/0: No such file or directory
[root@vbsmf /] $modinfo
Id Loadaddr Size Info Rev Module Name
6 10158000 445b 1 1 specfs (filesystem for specfs)
8 1015dd40 333c 1 1 TS (time sharing sched class)
9 10160938 8d4 - 1 TS_DPTBL (Time sharing dispatch table)
10 101609c0 291e3 2 1 ufs (filesystem for ufs)
11 10187b33 1f7 - 1 fssnap_if (File System Snapshot Interface)
12 10187c83 10900 226 1 rpcmod (RPC syscall)
12 10187c83 10900 226 1 rpcmod (32-bit RPC syscall)
12 10187c83 10900 1 1 rpcmod (rpc interface str mod)
13 10195cc3 66f08 0 1 ip (IP Streams module)
13 10195cc3 66f08 3 1 ip (IP Streams device)
14 101f30bb 1982 1 1 rootnex (sun4u root nexus 1.91)
15 101f4648 210 57 1 options (options driver)
17 101f4d3c 18d8 12 1 sad (Streams Administrative driver's)
18 101f639c 67b 2 1 pseudo (nexus driver for 'pseudo')
19 101f68a5 1c228 85 1 md (Meta disk base module)
24 1023362d 5234 - 1 md_stripe (Meta disk stripes module)
25 1023847d a760 - 1 md_mirror (Meta disk mirrors module)
26 10242765 10338 109 1 pcisch (PCI Bus nexus driver 1.201)
27 1025111d 1023b 50 1 glm (GLM SCSI HBA Driver 1.166.)
28 1025f310 8ac0 - 1 scsi (SCSI Bus Utility Routines)
29 10264fe4 18008 32 1 sd (SCSI Disk Driver 1.356)
33 1029bf1e a52d 135 1 uata (ATA controller Driver 1.89)
34 102a5713 151f - 1 dada ( ATA Bus Utility Routines)
37 102a7141 93c - 1 todm5819p_rmc (tod module for ALI M5819P)
38 102a7a0b 344f 196 1 rmc_comm (rmc_comm driver, v1.2)
39 102aaa92 508 199 1 pmugpio (Pmugpio Driver 1.1)
40 780b8000 72bf - 1 ufs_log (Logging UFS Module)
41 1027bd5c 1b04a 5 1 procfs (filesystem for proc)
42 102962ba fab 126 1 ebus (ebus nexus driver)
43 10296efd 2fcd 194 1 mc-us3i (Memory-controller: v1.1)
44 10299bba d98 134 1 power (power button driver v1.9)
45 1029a7aa 1016 159 1 pmubus (pmubus nexus driver)
46 10211abd 5cb6 197 1 rmclomv (rmclomv control driver v1.4)
47 1021684b 256a 9 1 pcf8584 (I2C Nexus Driver 1.13)
48 102a689a 464 - 1 i2c_svc (I2C module ver 1.2)
50 102aae3a 10628 8 1 sockfs (filesystem for sockfs)
52 102a6c7b 6be 11 1 clone (Clone Pseudodriver 'clone')
53 1029b5f0 304 2 1 ip6 (IP Streams module)
53 1029b5f0 304 143 1 ip6 (IP Streams device)
54 102bafd2 25e40 3 1 tcp (TCP Streams module)
54 102bafd2 25e40 42 1 tcp (TCP Streams device)
55 10219963 1059 - 1 md5 (MD5 Message-Digest Algorithm)
56 1029b734 365 4 1 tcp6 (TCP Streams module)
56 1029b734 365 146 1 tcp6 (TCP Streams device)
57 1021a907 9b50 5 1 udp (UDP Streams module)
57 1021a907 9b50 41 1 udp (UDP Streams device)
58 1029b8d9 365 6 1 udp6 (UDP Streams module)
58 1029b8d9 365 145 1 udp6 (UDP Streams device)
59 1022292f 7f10 7 1 icmp (ICMP Streams module)
59 1022292f 7f10 5 1 icmp (ICMP Streams device)
60 1029ba7e 30e 8 1 icmp6 (ICMP Streams module)
60 1029ba7e 30e 144 1 icmp6 (ICMP Streams device)
61 10228ea7 651b 9 1 arp (ARP Streams module)
61 10228ea7 651b 44 1 arp (ARP Streams driver)
62 1022e16a 4b93 10 1 timod (transport interface str mod)
64 102d9d66 c83 16 1 conskbd (Console kbd Multiplexer driver )
65 102da65d 1ffa 15 1 wc (Workstation multiplexer Driver )
66 102dba4f 4885 37 1 su (su driver 1.47)
67 102dff2c 3f2e 1 1 elfexec (exec module for elf)
67 102dff2c 3f2e 0 1 elfexec (32-bit exec module for elf)
68 102e3d57 3400 3 1 fifofs (filesystem for fifo)
69 102e6ebf adea 11 1 ldterm (terminal line discipline)
70 102f13b6 246d 12 1 ttcompat (alt ioctl calls)
71 102f365a 9223 29 1 zs (Z8530 serial driver V4.125)
72 102fc375 1568 26 1 ptsl (tty pseudo driver slave 'ptsl')
73 102fd645 211f 25 1 ptc (tty pseudo driver control 'ptc')
77 10318d3b 116a9 - 1 usba (USBA: USB Architecture 1.25)
78 10313719 498c - 1 usbser (USB generic serial module 1.1)
80 1032d854 15ac5 - 1 usba10 (USBA10: USB 1.0 Architecture 1.)
81 781b6000 4012 - 1 usba10_usbser (USBA10 Generic Serial Modul
82 10344153 1c30 13 1 rts (Routing Socket Streams module)
82 10344153 1c30 43 1 rts (Routing Socket Streams device)
83 781e8000 f487 15 1 ipsecesp (IP Encapsulating Security Paylo)
83 781e8000 f487 141 1 ipsecesp (IP Encapsulating Security Paylo)
84 7814e000 ff46 14 1 ipsecah (IP Authentication Header Stream)
84 7814e000 ff46 140 1 ipsecah (IP Authentication Header Stream)
85 7803c000 4af3 105 1 tl (TPI Local Transport Driver - tl)
86 78042000 44ab 16 1 keysock (keysock module)
86 78042000 44ab 139 1 keysock (PF_KEY Key Management Socket ST)
87 78040743 16ea 97 1 sysmsg (System message redirection (fan)
88 780416bd 82c 0 1 cn (Console redirection driver)
89 780e3c1a 475 2 1 intpexec (exec mod for interp)
90 78041d59 2c3 42 1 pipe (pipe(2) syscall)
90 78041d59 2c3 42 1 pipe (32-bit pipe(2) syscall)
91 10354c78 f9d 13 1 mm (memory driver)
92 78046000 8a90 195 1 bge (BCM570x driver v0.22)
93 7804e000 e868 - 1 gld (Generic LAN Driver (v2))
94 7805e000 4eac6 217 1 ce (CE Ethernet Driver v1.135)
95 780b0000 2bd7 - 1 vlan (Ethernet VLAN module (v1) 1.18)
97 780b4000 322b 115 1 pci_pci (Standard PCI to PCI bridge nexu)
98 780b7ad5 5ac 19 1 dump (crash dump driver)
99 780c0000 4421 201 1 doorfs (doors)
99 780c0000 4421 201 1 doorfs (32-bit door syscalls)
100 780c6000 2d06 88 1 devinfo (DEVINFO Driver 1.33)
103 780ca000 ebf8 66 1 ohci (USB OpenHCI Driver 1.23)
104 781579c6 c03 176 1 inst_sync (instance binding syscall)
104 781579c6 c03 176 1 inst_sync (32-bit instance binding syscall
105 780d4c38 1538 4 1 namefs (filesystem for namefs)
106 7814c6d0 1a98 4 1 logindmux ( LOGIND MUX Driver)
110 780bf047 d70 14 1 iwscn (Workstation Redirection driver )
111 7804d698 a4f 17 1 consms (Mouse Driver for Sun 'consms' 5)
113 780b6bbb 9f7 21 1 log (streams log driver)
114 780b734a 8f3 22 1 sy (Indirect driver for tty 'sy')
115 780c8b56 cc4 23 1 ptm (Master streams driver 'ptm')
116 10342e11 dc6 24 1 pts (Slave Stream Pseudo Terminal dr)
117 780c5670 a8c 31 1 seeprom (I2C serial EEPROM device driver)
120 1030a1c5 6a30 - 1 fctl (Sun FC Transport Library v1.12)
123 780c411c 17ec 34 1 smbus (SMBUS nexus Driver 1.6)
124 10308a8f 1dea 35 1 random (random number device v1.1)
125 780e0000 2290 17 1 authsha1 (SHA1-HMAC algorithm)
127 780b2637 1f01 38 1 openeepr (OPENPROM/NVRAM Driver v1.7)
131 78188000 30bc0 - 1 s1394 (IEEE 1394 Services Library 1.0)
143 10355a75 2e1f - 1 hidparser (HID PARSER 1.5)
146 103256b4 2d2e 60 1 fssnap (snapshot driver)
153 781af8c7 820 72 1 ksyms (kernel symbols driver)
156 10345623 2d73 - 1 usba10_hidparser (USBA10 HID PARSER 1.1)
161 780e2467 1a23 81 1 winlock (Winlock Driver v1.43)
162 10317889 14ed - 1 seg_drv (Segment Device Driver v1.1)
165 1030f375 2268 - 1 diaudio (Generic Audio)
167 1032811a 19cc 89 1 lockstat (Lock Statistics)
168 78215406 d1e 90 1 kstat (kernel statistics driver)
169 780e6000 5d08 91 1 vol (Volume Management Driver, 1.87)
170 780de000 1664 95 1 cpc (cpc sampling driver v1.8)
170 780de000 1664 179 1 cpc (cpc sampling system call)
170 780de000 1664 179 1 cpc (32-bit cpc sampling system call)
172 78259747 ba0 103 1 qec (QEC driver v1.32)
175 10347bee 4197 107 1 llc1 (LLC Class 1 Driver)
177 780ec000 4c5e - 1 amsrc1 (Audio Sample Rate Conv. #1 1.2)
178 780f2000 23ee - 1 audiosup (Audio Device Support 1.9)
179 780f6000 14f6e - 1 mixer (Audio Mixer 1.41)
182 1030331b 4edc 114 1 tnf (kernel probes driver 1.48)
184 7816a000 b3ec 150 1 fcp (Sun FCP Pseudo Driver v1.11)
185 1034b93d 4cd6 127 1 pm (power management driver v1.95)
186 780598aa 846 128 1 tod (tod driver 1.0)
189 780f0baf 1420 138 1 poll (Dev Poll driver)
190 780f4176 1ecf 147 1 lofi (loopback file driver (1.2))
193 78142000 499d - 1 pcihp (PCI nexus hotplug support v1.31)
194 78146605 1ae7 - 1 busra (Bus Resource Allocator (BUSRA) )
195 780df02c c4c - 1 hpcsvc (hot-plug controller services v1)
196 78148000 4fe8 - 1 pcicfg (PCI configurator v1.38)
203 781567ae bb1f - 1 amsrc2 (Audio Sample Rate Conv. #2 1.1)
214 1034f79b 4805 187 1 sppp (PPP 4.0 mux v1.3)
215 780da000 3ae0 18 1 sppptun (PPP 4.0 tunnel module v1.2)
215 780da000 3ae0 188 1 sppptun (PPP 4.0 tunnel driver v1.2)
218 781f0000 b5c0 191 1 rsm (Remote Shared Memory Driver 1.6)
219 7804dd6f 2e8 - 1 ipc (common ipc code)
220 780c95b2 aac - 1 rsmops (RSMOPS module 1.1)
221 781fb0b0 b33 198 1 rmcadm (rmcadm control driver v1.1)
222 78174f30 fec 200 1 pca9556 (pca9556 device driver v1.2)
231 10329430 1069 214 1 fcode (FCode driver 1.8)
232 1032a2c1 29ec - 1 fcodem (FCode framework 1.13)
245 78104000 4819 242 1 kb_ps2 (PS/2 Keyboard 1.31, 01/05/09)
250 781ba000 267e7 250 1 llc2 (SUN LLC2 Class II Streams Drive)
253 78108000 1bcaa - 1 pcmcia (PCMCIA Nexus Support)
264 781b2000 304c 263 1 ipdcm (IP/Dialup v1.9)
265 7814dd68 40a 264 1 ipdptp (IP/Dialup ptp interface v1.9)
266 7825bd1b 407 265 1 ipd (IP/Dialup mtp interface v1.9)
268 7826a000 165b8 268 1 wrsmd (RSMPI DLPI 1.4 03/01/08)
269 7827c000 295e6 19 1 nca (NCA Streams module)
269 7827c000 295e6 269 1 nca (NCA Streams device 1.2)
270 1032c3f5 15cc 15 1 mntfs (mount information file system)
271 78210000 159d2 11 1 tmpfs (filesystem for tmpfs)
272 78228000 2aa20 106 1 nfs (NFS syscall, client, and common)
272 78228000 2aa20 106 1 nfs (NFS syscall, client, and common)
272 78228000 2aa20 16 1 nfs (network filesystem)
272 78228000 2aa20 7 1 nfs (network filesystem version 2)
272 78228000 2aa20 17 1 nfs (network filesystem version 3)
273 78254000 4d9b - 1 rpcsec (kernel RPC security module.)
274 7825a000 1dc1 - 1 tlimod (KTLI misc module)
275 7825c000 860f - 1 klmmod (lock mgr common module)
276 78264000 65e3 18 1 autofs (filesystem for autofs)
277 10357fa4 109 2 1 IA (interactive scheduling class)
278 78258a03 f40 3 1 RT (realtime scheduling class)
279 102a70e1 28c - 1 RT_DPTBL (realtime dispatch table)
280 103406c9 2878 53 1 semsys (System V semaphore facility)
280 103406c9 2878 53 1 semsys (32-bit System V semaphore facil)
281 103064bf 26f8 52 1 shmsys (System V shared memory)
281 103064bf 26f8 52 1 shmsys (32-bit System V shared memory)
282 102186fd cf0 207 1 pset (processor sets)
282 102186fd cf0 207 1 pset (32-bit pset(2) syscall)
283 102ff5cc 3d82 178 1 kaio (kernel Async I/O)
283 102ff5cc 3d82 178 1 kaio (kernel Async I/O for 32 bit com)
284 780a8a5e 1687 20 1 ptem (pty hardware emulator)
285 781b482c 19d2 21 1 telmod (telnet module)
[root@vbsmf /kernel/drv] $vi st.conf
# Copyright (c) 1995-2000 by Sun Microsystems, Inc.
# All rights reserved.
#pragma ident "@(#)st.conf 1.27 00/08/29 SMI"
# This file contains configuration entries for both officially supported
# devices of Sun Microsystems and many 3rd party devices.
# The officially supported devices are :
# "ARCHIVE Python 28388"
# "ARCHIVE Python 28454"
# "ARCHIVE Python 29279"
# "ARCHIVE VIPER 150"
# "EXABYTE EXB-8200"
# "EXABYTE EXB-8500"
# "EXABYTE EXB-8505"
# "EXABYTE EXB-8900"
# "HP 88780"
# "HP C5683A" Note 1
# "HP C5713A" Note 1
# "Quantum DLT4000"
# "Quantum DLT7000"
# "Quantum DLT8000" Note 1
# "STK 9840" Note 1
# "SUN DLT4000"
# "SUN DLT4700"
# "SUN DLT7000"
# "TANDBERG SLR5"
# "TANDBERG TDC 4200"
# "TANDBERGMLR1"
# "TANDBERGMLR3"
# Notes
# 1 Drive is configured automatically - no entry is needed in st.conf.
# The 3rd party devices do apparently work with the configurations listed.
# All the entries have been taken from the net and probably have worked in
# the past, but have not been tested by Sun Microsystems. Use these entries
# as your starting point for generating your configuration entries.
#tape-config-list=
# "Emulex MTO2", "Emulex MT02 QIC-11/QIC-24", "MT02",
# "ANRITSU DMT2120", "Unisys 1/2\" Reel", "ANRITSU",
# "ARCHIVE Python 28454","Archive Python 4mm Helical Scan","ARCH_Python",
# "ARCHIVE Python 29279", "Archive Python 4mm DAT Stacker","ARCH_Python",
# "ARCHIVE Python 28388", "Archive/Conner CTDX004 4mm DAT", "Conner2-DAT",
# "ARCHIVE VIPER 150", "Archive QIC-150", "QIC150",
# "ARCHIVE VIPER 255", "Archive QIC-525", "QIC150",
# "DEC DLT2", "DEC DLT", "DLT2",
# "DEC TZ87", "DEC DLT", "DLT2",
# "EXABYTE EXB-2501", "Exabyte EXB-2501 QIC", "EXB-2501",
# "EXABYTE EXB-4200c", "Exabyte 4mm Helical Scan","Exa4200c",
# "EXABYTE EXB-8200", "Exabyte EXB-8200 8mm Helical Scan","EXB-8200",
# "EXABYTE EXB-8500", "Exabyte EXB-8500 8mm Helical Scan","EXB-850X",
# "EXABYTE EXB-8505", "Exabyte EXB-8505 8mm Helical Scan","EXB-850X",
# "EXABYTE EXB8500C", "Exabyte 8500C 8mm Helical Scan", "EXB-850X",
# "EXABYTE EXB-8900", "Mammoth EXB-8900 8mm Helical Scan","EXB-8900",
# "FUJITSU M1016B M2483B","Fujitsu 1/2\" Cartridge", "Fujitsu_comp",
# "FUJITSU M248", "Fujitsu 1/2\" Cartridge", "Fujitsu_m248x",
# "HP 88780", "HP-88780 1/2\" Reel", "HP_half",
# "HP C1533A", "HP DDS2 4mm DAT loader", "HP_DAT",
# "HP C1553A ", "HP C1553A 4mm DAT", "HP_DAT",
# "HP C1537A", "HP DDS-3 4mm DAT ", "HP_DAT_3",
# "HP C1557A", "HP DDS-3 4mm DAT loader", "HP_DAT_3",
# "HP HP35470A", "HP 35470A 4mm DAT", "HP_DAT",
# "HP HP35480A", "HP 35480A 4mm DAT", "HP_DAT",
# "IBM 03490", "IBM 3490E 1/2\" Cartridge", "CLASS_3490",
# "IBM 9348", "STK 4220 1/2\" Cartridge", "C3490",
# "KENNEDY", "Kennedy 1/2\" Reel", "KENNEDY",
# "LMS", "CDC 1/2\" Cartridge", "LMS",
# "M4 DATA 123107 SCSI", "M4-Data 1/2\" Reel", "M4_DATA",
# "Metrum", "Metrum VHS Cartridge", "MetD",
# "QUANTUM DLT7000", "Quantum DLT7000", "DLT7k-data",
# "SUN DLT7000", "Sun DLT7000", "DLT7k-data",
# "Quantum DLT4000", "Quantum DLT4000", "DLT-data",
# "SUN DLT4000", "DLT4000", "DLT-data",
# "SUN DLT4700", "DLT4700 Library", "DLT-data",
# "R-BYTE RB100", "R-Byte Whozits", "DAT",
# "SONY SDT-5000", "SONY 4mm DAT", "DAT",
# "SONY SDT-5200", "SONY 4mm DAT", "DAT",
# "STK 9490", "STK 9490 1/2\" Cartridge", "CLASS_3490",
# "STK 4280", "STK 4280 1/2\" Cartridge", "C3490",
# "STK", "STK 1/2\" Cartridge", "CLASS_3490",
# "TANDBERG 4100", "Tandberg 4100 QIC", "TAND_4100_QIC",
# "TANDBERG 4200", "Tandberg 4200 QIC", "TAND_4200_QIC",
# "TANDBERG TDC 4200", "Tandberg QIC 2.5 Gig Tape Drive", "TANDB-2_5G",
# "TANDBERG SLR5", "Tandberg 8 Gig QIC", "TAND-8G-VAR",
# "TANDBERGMLR1", "Tandberg MLR1 QIC", "TANDBERG_MLR1",
# "TANDBERGMLR3", "Tandberg 50 Gig QIC", "TAND-50G-VAR",
# "TELEX", "STK 4220 1/2\" Cartridge", "C3490",
# "WANGTEK 51000 SCSI", "Wangtek 1.2GB QIC", "WtQIC",
# "WANGTEK 5150ES", "Wangtek QIC-150", "WANGTEK_QC150",
# "WANGTEK 5525ES SCSI", "Wangtek 525MB QIC", "WtQIC",
# "WANGTEK 6130-HS", "Wangtek 4mm Helical Scan", "WANGTEK_6130",
# "WangDAT Model 2600", "WangDAT 4mm DAT", "WangDAT",
# "WangDAT Model 3400", "WangDAT 4mm DAT", "WangDAT",
# "WangDAT", "Wang DAT 3.81 Helical Scan", "WangDAT",
# "\076\000", "Fujitsu 1/2\" Cartridge", "Fujitsu_half";
#ANRITSU = 1,0x25,0,0x41d,4,0x00,0x02,0x03,0x03,1;
#ARCH_Python= 1,0x2c,0,0xde39,4,0x00,0x8c,0x8c,0x8c,3;
#CLASS_3490 = 1,0x24,0,0x1c43d,1,0x00,0;
#C3490 = 1,0x24,0,0x1c43d,4,0x00,0x00,0x00,0x01,2;
#Conner2-DAT= 1,0x2c,0,0xde39,1,0x00,0;
#DAT = 1,0x34,0,0x0439,1,0x00,0;
#DLT2 = 1,0x38,0,0xd639,4,0x17,0x18,0x80,0x81,2;
#DLT-data = 1,0x38,0,0xD639,4,0x80,0x81,0x82,0x83,2;
#DLT7k-data = 1,0x38,0,0xD639,4,0x82,0x83,0x84,0x85,2;
#EXB-2501 = 1,0x28,1024,0x442,1,0x00,0;
#EXB-8200 = 1,0x28,0,0x8c79,1,0x00,0;
#EXB-850X = 1,0x29,0,0xce39,4,0x14,0x15,0x8c,0x8c,1;
#EXB-8900 = 1,0x29,0,0x19E39,4,0x27,0x27,0x27,0x27,3;
#Exa4200c = 1,0x34,0,0x1639,2,0x63,0x0,1;
#Fujitsu_comp = 1,0x21,0,0x18639,4,0x00,0x00,0x00,0x09,1;
#Fujitsu_half = 1,0x21,0,0x63b,1,0x00,0;
#Fujitsu_m248x = 1,0x21,0,0xc639,1,0x00,0;
#HP_DAT = 1,0x34,0,0x19679,1,0x0,0;
#HP_DAT_3 = 1,0x34,0,0x9639,4,0x00,0x8c,0x8c,0x8c,1;
#HP_half = 1,0x23,0,0x41d,4,0x01,0x02,0x03,0xc3,1;
#KENNEDY = 1,0x22,0,0x41d,4,0x01,0x02,0x03,0x03,1;
#LMS = 1,0x20,0,0x66b,1,0x00,0;
#M4_DATA = 1,0x27,0,0x49d,4,0x01,0x02,0x06,0x06,1;
#MT02 = 1,0x14,512,0x202,4,0x84,0x05,0x05,0x05,1;
#MetD = 1,0x36,0,0x1639,1,0x00,0;
#QIC150 = 1,0x15,512,0x642,1,0x00,0;
#TANDB-2_5G = 1,0x32,0,0xD67b,1,0x0,0;
#TAND-8G-VAR = 1,0x37,0,0x963b,4,0xA0,0xD0,0xD0,0xD0,3;
#TANDBERG_MLR1 = 1,0x32,512,0x463a,1,0x00,0;
#TAND-50G-VAR = 1,0x37,0,0x963b,4,0xA0,0xD0,0xD0,0xD0,3;
#TAND_4100_QIC = 1,0x32,512,0x463a,1,0x00,0;
#TAND_4200_QIC = 1,0x32,512,0x463a,1,0x00,0;
#WANGTEK_6130 = 1,0x2a,0,0x659,1,0x00,0;
#WANGTEK_QC150 = 1,0x16,512,0x642,1,0x00,0;
#WangDAT = 1,0x2b,0,0x659,1,0x00,0;
#WangDAT = 1,0x34,0,0x0679,1,0x00,0;
#WtQIC = 1,0x32,512,0x467a,1,0x00,0;
name="st" class="scsi"
target=0 lun=0;
name="st" class="scsi"
target=1 lun=0;
name="st" class="scsi"
target=2 lun=0;
name="st" class="scsi"
target=3 lun=0;
name="st" class="scsi"
target=4 lun=0;
name="st" class="scsi"
target=5 lun=0;
name="st" class="scsi"
target=6 lun=0;
# as your starting point for generating your configuration entries.
#tape-config-list=
# "Emulex MTO2", "Emulex MT02 QIC-11/QIC-24", "MT02",
# "ANRITSU DMT2120", "Unisys 1/2\" Reel", "ANRITSU",
# "ARCHIVE Python 28454","Archive Python 4mm Helical Scan","ARCH_Python",
# "ARCHIVE Python 29279", "Archive Python 4mm DAT Stacker","ARCH_Python",
# "ARCHIVE Python 28388", "Archive/Conner CTDX004 4mm DAT", "Conner2-DAT",
# "ARCHIVE VIPER 150", "Archive QIC-150", "QIC150",
# "ARCHIVE VIPER 255", "Archive QIC-525", "QIC150",
# "DEC DLT2", "DEC DLT", "DLT2",
# "DEC TZ87", "DEC DLT", "DLT2",
# "EXABYTE EXB-2501", "Exabyte EXB-2501 QIC", "EXB-2501",
# "EXABYTE EXB-4200c", "Exabyte 4mm Helical Scan","Exa4200c",
# "EXABYTE EXB-8200", "Exabyte EXB-8200 8mm Helical Scan","EXB-8200",
# "EXABYTE EXB-8500", "Exabyte EXB-8500 8mm Helical Scan","EXB-850X",
# "EXABYTE EXB-8505", "Exabyte EXB-8505 8mm Helical Scan","EXB-850X",
# "EXABYTE EXB8500C", "Exabyte 8500C 8mm Helical Scan", "EXB-850X",
# "EXABYTE EXB-8900", "Mammoth EXB-8900 8mm Helical Scan","EXB-8900",
# "FUJITSU M1016B M2483B","Fujitsu 1/2\" Cartridge", "Fujitsu_comp",
# "FUJITSU M248", "Fujitsu 1/2\" Cartridge", "Fujitsu_m248x",
# "HP 88780", "HP-88780 1/2\" Reel", "HP_half",
# "HP C1533A", "HP DDS2 4mm DAT loader", "HP_DAT",
# "HP C1553A ", "HP C1553A 4mm DAT", "HP_DAT",
# "HP C1537A", "HP DDS-3 4mm DAT ", "HP_DAT_3",
# "HP C1557A", "HP DDS-3 4mm DAT loader", "HP_DAT_3",
# "HP HP35470A", "HP 35470A 4mm DAT", "HP_DAT",
# "HP HP35480A", "HP 35480A 4mm DAT", "HP_DAT",
# "IBM 03490", "IBM 3490E 1/2\" Cartridge", "CLASS_3490",
# "IBM 9348", "STK 4220 1/2\" Cartridge", "C3490",
# "KENNEDY", "Kennedy 1/2\" Reel", "KENNEDY",
# "LMS", "CDC 1/2\" Cartridge", "LMS",
# "M4 DATA 123107 SCSI", "M4-Data 1/2\" Reel", "M4_DATA",
# "Metrum", "Metrum VHS Cartridge", "MetD",
# "QUANTUM DLT7000", "Quantum DLT7000", "DLT7k-data",
# "SUN DLT7000", "Sun DLT7000", "DLT7k-data",
# "Quantum DLT4000", "Quantum DLT4000", "DLT-data",
# "SUN DLT4000", "DLT4000", "DLT-data",
# "SUN DLT4700", "DLT4700 Library", "DLT-data",
# "R-BYTE RB100", "R-Byte Whozits", "DAT",
# "SONY SDT-5000", "SONY 4mm DAT", "DAT",
# "SONY SDT-5200", "SONY 4mm DAT", "DAT",
# "STK 9490", "STK 9490 1/2\" Cartridge", "CLASS_3490",
# "STK 4280", "STK 4280 1/2\" Cartridge", "C3490",
# "STK", "STK 1/2\" Cartridge", "CLASS_3490",
# "TANDBERG 4100", "Tandberg 4100 QIC", "TAND_4100_QIC",
# "TANDBERG 4200", "Tandberg 4200 QIC", "TAND_4200_QIC",
# "TANDBERG TDC 4200", "Tandberg QIC 2.5 Gig Tape Drive", "TANDB-2_5G",
# "TANDBERG SLR5", "Tandberg 8 Gig QIC", "TAND-8G-VAR",
# "TANDBERGMLR1", "Tandberg MLR1 QIC", "TANDBERG_MLR1",
# "TANDBERGMLR3", "Tandberg 50 Gig QIC", "TAND-50G-VAR",
# "TELEX", "STK 4220 1/2\" Cartridge", "C3490",
# "WANGTEK 51000 SCSI", "Wangtek 1.2GB QIC", "WtQIC",
# "WANGTEK 5150ES", "Wangtek QIC-150", "WANGTEK_QC150",
# "WANGTEK 5525ES SCSI", "Wangtek 525MB QIC", "WtQIC",
# "WANGTEK 6130-HS", "Wangtek 4mm Helical Scan", "WANGTEK_6130",
# "WangDAT Model 2600", "WangDAT 4mm DAT", "WangDAT",
# "WangDAT Model 3400", "WangDAT 4mm DAT", "WangDAT",
# "WangDAT", "Wang DAT 3.81 Helical Scan", "WangDAT",
# "\076\000", "Fujitsu 1/2\" Cartridge", "Fujitsu_half";
#ANRITSU = 1,0x25,0,0x41d,4,0x00,0x02,0x03,0x03,1;
#ARCH_Python= 1,0x2c,0,0xde39,4,0x00,0x8c,0x8c,0x8c,3;
#CLASS_3490 = 1,0x24,0,0x1c43d,1,0x00,0;
#C3490 = 1,0x24,0,0x1c43d,4,0x00,0x00,0x00,0x01,2;
#Conner2-DAT= 1,0x2c,0,0xde39,1,0x00,0;
#DAT = 1,0x34,0,0x0439,1,0x00,0;
#DLT2 = 1,0x38,0,0xd639,4,0x17,0x18,0x80,0x81,2;
#DLT-data = 1,0x38,0,0xD639,4,0x80,0x81,0x82,0x83,2;
#DLT7k-data = 1,0x38,0,0xD639,4,0x82,0x83,0x84,0x85,2;
#EXB-2501 = 1,0x28,1024,0x442,1,0x00,0;
#EXB-8200 = 1,0x28,0,0x8c79,1,0x00,0;
#EXB-850X = 1,0x29,0,0xce39,4,0x14,0x15,0x8c,0x8c,1;
#EXB-8900 = 1,0x29,0,0x19E39,4,0x27,0x27,0x27,0x27,3;
#Exa4200c = 1,0x34,0,0x1639,2,0x63,0x0,1;
#Fujitsu_comp = 1,0x21,0,0x18639,4,0x00,0x00,0x00,0x09,1;
#Fujitsu_half = 1,0x21,0,0x63b,1,0x00,0;
#Fujitsu_m248x = 1,0x21,0,0xc639,1,0x00,0;
#HP_DAT = 1,0x34,0,0x19679,1,0x0,0;
#HP_DAT_3 = 1,0x34,0,0x9639,4,0x00,0x8c,0x8c,0x8c,1;
#HP_half = 1,0x23,0,0x41d,4,0x01,0x02,0x03,0xc3,1;
#KENNEDY = 1,0x22,0,0x41d,4,0x01,0x02,0x03,0x03,1;
#LMS = 1,0x20,0,0x66b,1,0x00,0;
#M4_DATA = 1,0x27,0,0x49d,4,0x01,0x02,0x06,0x06,1;
#MT02 = 1,0x14,512,0x202,4,0x84,0x05,0x05,0x05,1;
#MetD = 1,0x36,0,0x1639,1,0x00,0;
#QIC150 = 1,0x15,512,0x642,1,0x00,0;
#TANDB-2_5G = 1,0x32,0,0xD67b,1,0x0,0;
#TAND-8G-VAR = 1,0x37,0,0x963b,4,0xA0,0xD0,0xD0,0xD0,3;
#TANDBERG_MLR1 = 1,0x32,512,0x463a,1,0x00,0;
#TAND-50G-VAR = 1,0x37,0,0x963b,4,0xA0,0xD0,0xD0,0xD0,3;
#TAND_4100_QIC = 1,0x32,512,0x463a,1,0x00,0;
#TAND_4200_QIC = 1,0x32,512,0x463a,1,0x00,0;
#WANGTEK_6130 = 1,0x2a,0,0x659,1,0x00,0;
#WANGTEK_QC150 = 1,0x16,512,0x642,1,0x00,0;
#WangDAT = 1,0x2b,0,0x659,1,0x00,0;
#WangDAT = 1,0x34,0,0x0679,1,0x00,0;
#WtQIC = 1,0x32,512,0x467a,1,0x00,0;
name="st" class="scsi"
target=0 lun=0;
name="st" class="scsi"
target=1 lun=0;
name="st" class="scsi"
target=2 lun=0;
name="st" class="scsi"
target=3 lun=0;
name="st" class="scsi"
target=4 lun=0;
name="st" class="scsi"
target=5 lun=0;
nam

Sorry Simon, but I had to jump in on that.
You are correct that they'll need to probe from OBP, however...
jumping down from an active OS will leave much in various bus registers and they'll lock up the entire system when a probe is done that way. They'll have to power-cycle the chassis to recover.
Vassilios,
When you have the chance for testing this system, bring the chassis down to the OBP level. ( init 0 is acceptable ) then do:
OK setenv auto-boot? false <enter>
OK reset-all <enter>
The chassis will cycle and automatically stop at the OK prompt, with empty bus registers, and you can probe all you wish.
The peripheral MUST be seen at the hardware level before an OS can dream of manipulating it.
But, if I may ask...
You attached the tape peripheral to where?
(the integrated onboard SCSI connector or to an add-on card?)
Is it a Single-Ended SCSI device, a HVD SCSI device, or a LVD SCSI device?
If your cable is attached to an appropriate add-on card, do you need to install any packages for that card?

Similar Messages

  • Oracle ODBC driver not register in Windows

    hi,
    i notice that the oracle odbc driver is not register as one of the data source in the windows. Do anyone having this problem too?? and any solutions??
    I've installed Oracle 10.2.0.1.0 on a windows XP platform. When i want to create a data source in the ODBC, i realize that the oracle driver is not there...
    thanks in advance

    hi,
    i've checked, oracle odbc is installed in my machine, but it is not appear in the windows data source ODBC (control panel > administrative tools > Data Sources (ODBC)).
    I've tried to uninstall and re-install, again the oracle odbc is installed in my machine but never appear in the windows data source ODBC. Is there a way to made it appear in the windows manually?
    thanks

  • Custom Data Provider Not Registered in Report Server (Sql Server 2012)

    We have a simple test report project set up and can preview the reports with no errors or problems from the designer. We can deploy the report project, but when trying to view the reports from the browser, we get the following error:
    An error as occurred during report processing, (rsProcessingAborted)
    An attempt has been made to use a data extension 'LiMeDAS' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
    I have followed this article that explained how to register a data provider extension:
    https://msdn.microsoft.com/en-ca/library/bb326409.aspx
    I have placed the assemblies in:
    C:\Program Files\Microsoft SQL Server\MSRS11.LIMEDAS\Reporting Services\ReportServer\bin
    Added the following line to the rsreportserver config file (inside the <extensions><data> tags)
    <Extension Name="LiMeDAS" Type="Limedas.Data.Provider.LimedasConnection,Limedas.Data.Provider"/>
    and finally added the following to the rssrvpolicy config file (inside the top level CodeGroup tag):
    <CodeGroup class="UnionCodeGroup" version="1" PermissionSetName="FullTrust" Name="LiMeDASDataProviderCodeGroup" Description="Grants permission to the LiMeDAS data processing extension for reporting services.">
                  <IMembershipCondition class="UrlMembershipCondition" version="1" Url="C:\Program Files\Microsoft SQL Server\MSRS11.LIMEDAS\Reporting Services\ReportServer\bin\Limedas.Data.Provider.dll"
    />
                </CodeGroup> 
    We have the data extension set up perfectly for the designer, because I can see it as a type of connection and the preview works in the designer.
    But, for some reason it does not work in the server. They were set up the same way, but the server will not work. From the report manager page, when we try to add a data source, the only type option is Sql Server, none of the other extensions mentioned in
    the config file. Does anyone know what else could cause this issue? 

    Hi Justin,
    According to the error message and the issue can be caused by the edition of your SSRS is not support for the custom data provider. For example the express edition have limitation support on this:
    Features Supported by the Editions of SQL Server 2012 .
    If your edition is the supportted edition and the issue can be caused by the custom data provider do not necessarily support all the functionality supplied by Reporting Services data processing extensions. In addition, some OLE DB data providers and ODBC
    drivers can be used to author and preview reports, but are not designed to support reports published on a report server. For example, the Microsoft OLE DB Provider for Jet is not supported on the report server. For more information, see
    Data Processing Extensions and .NET Framework Data Providers (SSRS).
    If you are running on a 32-bit platform, the data provider must be compiled for a 32-bit platform. If you are running on a 64-bit platform, the data provider must be compiled for the 64-bit platform. You cannot use a 32-bit data provider wrapped with 64-bit
    interfaces on a 64 bit platform.
    More details information:Data Sources Supported by Reporting Services (SSRS)
    Similar thread for your reference：
    ERROR: An attempt has been made to use a data extension 'SQL' that is not registered for
    this report server.
    Error when viewing SSRS report with SQL Azure as data source
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • HT1386 I cannot sync the calendar on my MacBook Pro with either iPhone 4s or my iPad -I followed the apple instructions to sync but the data is not registering. Sorry if this is something very simple!

    The info screen says my calendars are being synced over iCloud which they aren't pluse I want to sync them via the usb connection - how do i change that setting? Thanks

    Hello Danny,
    Thank you for using Apple Support Communities!
    I found this article for you to help troubleshoot why the calendar data is not syncing over to your devices.
    It is named Mac OS X: Resetting the SyncServices folder found here http://support.apple.com/kb/TS1627.
    There are different instructions depending on your OS in the article.
    If for some reason the issue persists, I would take a look at the article named Sync Services: Advanced troubleshooting for contact and calendar syncing located here: http://support.apple.com/kb/ts2481.
    All the very best,
    Sterling

  • Read data driver not giving exact values

    I am trying to get the data from an OSA usinf the Labview read data
    instrument driver. It most of  the time shows the spectrum similar
    to the OSA in the Labview waveform grapf but the values, meaning the
    x-axis and y-axis values do not at all correspond. I tried changing the
    range using min,max and increment but did not work.Please advise. Here
    is the snapshot of the graph obtained and the little program is also
    attached.
    Attachments:
    readdata.vi ‏26 KB
    Screen01.JPG ‏105 KB

    ok i didnt really know what i was writing about then
    but still i know from my own experience that the 2 types of graphs behave in different way when user tries to format x-axis
    i had a program where 1 frame (have multiple frames in while function to control an instrument) was devoted to reading from the instrument and displaying a graph
    i read not only data but also start/stop points on x axis
    before i displayed data i used this additional info to format the graph using property nodes and it worked but then i pased data to the graph and x-axis was forced back to display number of points (i also set labels in the same way and it worked perfectly well for labels)
    it also resulted in graph flickering
    that was when i was using waveform graph, changing it simply to xy graph (and casting data to proper format)  fixed the bug
    this hint and the explanation: 'Waveform graphs plot data as a function of time, you can't directly define the data on the X Plot. To do this you need to use an XY graph.' i got from one NI engineer:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=231199&jump=true

  • A205-S5879 Multi-drive driver not registering properly

    For some reason the driver for the cd/dvd rom isn't working.  Which in turn makes it so the dvd drive doesn't work at all (except for booting when set to first boot device) but then it only gives options for reloading the computer.  I try to reinstall the driver but can't, keeps using the same one.  I've been trying to find anything to help, and haven't yet.  If anyone has info, please don't hesitate to let me know, worst comes to worst, I'll reload the darn thing.  Thanks

    Satellite A205-S5879 
    The drivers for optical drives are not available separately. They are native to Windows Vista.
    To reinstall them, right-click the drive in Device Manager and click Uninstall. The driver is reinstalled when Windows is restarted.
    -Jerry

  • Access ODBC Driver not appearing in Create New Data Source List

    When I run C:\Windows\SysWOW64\odbcad32.exe  the Access driver is not showing up as an option. I'm running Windows 7 professional and Access 2013.  I'm guessing the driver is on my machine and is either not registered or the registry
    has the wrong location. I have looked under HKEY_LOCAL_MACHINE>ODBC>ODBCINST.INI and see no references to an Access driver in any subfolders.
    I think I need the name of the driver .dll and where it needs to be registered to fix the problem.
    Any ideas?
    Thanks,
    Joe

    Hi Joe,
    According to your description, after you run C:\Windows\SysWOW64\odbcad32.exe, Access driver is not displayed when you expand HKEY_LOCAL_MACHINE>ODBC>ODBCINST.INI node.
    The issue is caused by wrong path of odbccad32, please make sure that you are using Administrator account or you have administrative privileges, then refer to the following steps:
    Go to Control Panel.
    Click Administrative Tools.
    Right-click Data Sources(ODBC) to open Properties dialog box.
    In Target text box, type  %windir%\syswow64\odbcad32.exe             
    In Start in text box, type %windir%\syswow64, then click OK to  save the settings.
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu

  • Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine. at System.Data.OleDb.OleDbServicesWrapper

    HI
    when i copy asp.net 3.5  application  from IIS7 to IIS 8 in windows server 2012 and browse the application and try to save data in oracle , i  get following error in Event viewer
    Log Name:      Application
    Source:        ASP.NET 4.0.30319.0
    Date:          4/6/2015 2:53:21 PM
    Event ID:      1309
    Task Category: Web Event
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      TSharepint2013.test.com
    Description:
    Event code: 3005 
    Event message: An unhandled exception has occurred. 
    Event time: 17/06/36 02:53:21 ? 
    Event time (UTC): 17/06/36 11:53:21 ? 
    Event ID: 34f214e1dcdf45f5ad8450739c954494 
    Event sequence: 24 
    Event occurrence: 1 
    Event detail code: 0 
    Application information: 
    Process information: 
        Process ID: 18724 
        Process name: w3wp.exe 
        Account name: TEST\splaw 
    Exception information: 
        Exception type: InvalidOperationException 
        Exception message: The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine.
       at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
       at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
       at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.OleDb.OleDbConnection.Open()
       at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
       at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Request information: 
     Request URL: http://-----:50/executionreq/printLawsuit.aspx 
        Request path: /executionreq/printLawsuit.aspx 
        User host address: ---3.184 
        User:  
        Is authenticated: False 
        Authentication Type:  
        Thread account name: TEST\Spfarm 
    Thread information: 
        Thread ID: 16 
        Thread account name: TEST\Spfarm 
        Is impersonating: False 
        Stack trace:    at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper& datasrcWrapper)
       at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
       at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.OleDb.OleDbConnection.Open()
       at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
       at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Custom event details: 
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="ASP.NET 4.0.30319.0" />
        <EventID Qualifiers="32768">1309</EventID>
        <Level>3</Level>
        <Task>3</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2015-04-06T11:53:21.000000000Z" />
        <EventRecordID>174735</EventRecordID>
        <Channel>Application</Channel>
        <Computer>TSharepint2013.test.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>3005</Data>
        <Data>An unhandled exception has occurred.</Data>
        <Data>17/06/36 02:53:21 ?</Data>
        <Data>17/06/36 11:53:21 ?</Data>
        <Data>34f214e1dcdf45f5ad8450739c954494</Data>
        <Data>24</Data>
        <Data>1</Data>
        <Data>0</Data>
        <Data>/LM/W3SVC/3/ROOT/ExecutionReq-1-130727947211114471</Data>
        <Data>Full</Data>
        <Data>/ExecutionReq</Data>
        <Data>C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\</Data>
        <Data>TSHAREPINT2013</Data>
        <Data>
        </Data>
        <Data>18724</Data>
        <Data>w3wp.exe</Data>
        <Data>TEST\splaw</Data>
        <Data>InvalidOperationException</Data>
        <Data>The 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local machine.
       at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper&amp; datasrcWrapper)
       at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
       at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal&amp; connection)
       at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
       at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.OleDb.OleDbConnection.Open()
       at printLawsuit.RetJudgement(Int32 x) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 2374
       at printLawsuit.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\wss\VirtualDirectories\Law\ExecutionReq\printLawsuit.aspx.vb:line 44
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    </Data>
        <Data>http://----:50/executionreq/printLawsuit.aspx</Data>
        <Data>/executionreq/printLawsuit.aspx</Data>
        <Data>10.169.3.184</Data>
        <Data>
        </Data>
        <Data>False</Data>
        <Data>
        </Data>
        <Data>TEST\Spfarm</Data>
        <Data>16</Data>
        <Data>TEST\Spfarm</Data>
        <Data>False</Data>
        <Data>   at System.Data.OleDb.OleDbServicesWrapper.GetDataSource(OleDbConnectionString constr, DataSourceWrapper&amp; datasrcWrapper)
       at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
       at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, 
    </Data>
      </EventData>
    </Event>
    adil

    Hi,
    As this question is more relate to iis, I suggest you post it to IIS Forum, you will get more help and confirmed answers from there.
    http://forums.iis.net/
    Best regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Hi transfered my i tunes liberary via a hard drive to my new laptop. It wont let me play anything I've bought from i tunes saying computer is not registered. i have registered it and when i go through the register process it says it is registered?

    Help. transfered my itunes liberary via a hard drive to a new lap top. wasnt easy, cant play any thing I bought on the old computer says this one not registered? The box that comes up has my VERY old email on it, I change this to my current one put in password and it says computer is registered. This then just goes around in circles! Any ideas?

    I found this article some time ago when I was trying to help someone else in this same situation. This is a copy and paste from the website. The website is provided below for you to read before you try this.
    Plug your phone into iTunes
    Click setup as a new device
    Immediately unplug your phone from the computer
    Give it about 30 seconds and iTunes will give a message (I don’t remember the specific, but regarding you unplugging the device and it not completing)
    Plug your phone back in
    Viola! no restore occurred and you can access everything again
    This computer has previously synced with an iPhone or another iOS device.

  • JDBC Driver not found when connecting to Data Federator XI 3.0 SP3

    Hello,
    I am trying to connect Crystal 2008 to Data Federator however I am getting the Error
    Failed to open connection.
    Details: JDBC Driver not found.
    The JDBC Drivers are installed and working for the Universe Designer, however I am unable to get it working for Crystal. I am using the following connection parameters on Crystal:
    Connection URL: jdbc:datafederator://<<servername>>:3055/<<catalog>>
    Database Classname: com.businessobjects.datafederator.jdbc.DataFederatorDriver
    Any Advice on what I may have missed?

    The issue was solved, thanks to Patric Wan:
    u201CFailed to open the connection. Details: JDBC driver not found.u201D
    This means Data Federator JDBC driver was not added to:
    C:\Program Files\Business Objects\common\<version>\java\CRConfig.xml
    How to connect the Data Federator Server using JDBC?
    1. Retrieve the following files from the machine where Data Federator is installed, from the directory [data-federator-installation-dir]/JdbcDriver/lib.
        - thindriver.jar
        - avalon-framework-4.1.5.jar
        - jacorb.jar
        - log4j-1.2.8.jar
        - logkit-1.2.jar
    2. Copy these files to a directory of your choice ([your-jdbc-driverdirectory]).
    3. Add [your-jdbc-driver-directory]/thindriver.jar to CRConfig.xml   <Add to Classpath tag, you can refer to original sample.CRConfig.xml should be at: C:\Program Files\Business Objects\Common\4.0\java\CRConfig.xml, or search your BOBJ products install to find this file>
    4. URL: jdbc:leselect://<host>[:<port>][/[<catalog>]][[;param-name=value]*]
    Class Name : LeSelect.ThinDriver.ThinDriver
    Edited by: Craig Sander on Feb 12, 2011 8:22 PM

  • I have received an error message from an attached USB hard drive (not Time Capsule) stating "Disk Name" cannot be repaired. Back up your data and reformat. I opened the Disk Utility in an attempt to repair the disk but am advised that the disk "could not

    I have received an error message relating to an attached USB hard drive (not a back up and not Time Capsule) advising that "disk name" cannot be repaired. Back up your data and reformat. When I attempted to verify the disk with Disk Utility, I was advised that the disk could not be unmounted. What can I do to repair the disk?
    Write Status is Read/Write
    SMART Status is Not Supported
    Partition Map Scheme is Master Boot Record
    HELP!
    timothy7712

    You need something stronger, such as DiskWarrior, TechTools Pro, or Data Rescue.

  • My hard drive went and when i got my computer back from being fixed my itunes had been deleted, so i re installed it however my ipad wont connect to the itunes as its not registered to this itune, also all my songs arent on here what do i do?

    My hard drive went and when i got my computer back from being fixed my itunes had been deleted, so i re installed it however my ipad wont connect to the itunes as its not registered to this itune, also all my songs arent on here what do i do?

    There is no such thing as an "SG3" or "SG4".  Did you possibly mean a 3GS and iPhone4?
    It has always been very basic to ensure that a backup exists of your media and other important files.  Computers fail, hard drives crashes... things happen.  Do you not have a backup?  The iPhone, like all iDevices is NOT a backup of your media, but rather a mirror of the content in the iTunes library on your computer.
    If your contacts, pics, etc are not on your computer, no backups of the iPhone exist, and they are not on the phone, they are gone.
    No one can magically make them re-appear.

  • How do I get an NTFS hard drive containing data to NOT show up as bootable in boot camp?

    Hi, somehow in the process of getting Win7 x64, Windows XP, and OSX Lion installed on my 1,1 MacPro, one of my data hard drives (NTFS formatted) has "picked up" a boot directory, boot mgr, etc. entries. It now shows up as a start-up disk choice in Boot Camp. Not.
    Should I:
    1. Just delete the boot entries and directory (I bet not)
    2. Use diskpart to remove that GPT partition (the boot partition) on that data drive
    3. Or do I need to use a partition tool to remove the bootable attributes? I would just ignore it, but it appears to be borking my Windows 7 start up occassionally.
    Thanks,
    Les

    Do you hear the drive spin up?
    You may want to contact the manufacturer and ask for a replacement power adapter/cord and see if that helps.
    Personally, I think there has been some damage to the circuitry inside the enclosure, which really can't be repaired.
    ~Lyssa

  • User did not specify local data drive, MSATA drive

    SCCM 2007 R2 SP2 windows 7 x64.
    Hi,
       I am trying to image Dell M6800 with MSATA drive, but imaging is failing to
    User did not specify local data drive
    Volume C:\ is not a fixed hard drive
    Volume D:\ is not a fixed hard drive
    Volume X:\ is not a fixed hard drive
    TSM root drive =
    We do not find an available volume to store the local data path
    Winpe is not finding Msata drive. i have injected new "WinPE3.0-Drivers-A15-47R7V" from dell. no luck. Dispart find disk on 0 fine.
    Here is the log file http://1drv.ms/1L7Cw6b
    do you i need to install sata driver?
    thanks
    orion

    got it fixed.
    1.diskpart
    2.list disk
    3.select disk #
    4.clean
    5.create partition primary
    6.select partition 1
    7.active
    8.format quick fs=NTFS
    9.assign
    10.exit
    works great
    orion

  • Blank Disc in drive did not register as being in the drive and so I can not eject it even the ^ button does not do anything.

    Blank Disc in drive did not register as being in the drive and so I can not eject it and even the ^ button does not do anything.

    CD/DVD - Eject Stuck
    CD/DVD - Eject Stuck (2)
    CD/DVD - Eject Stuck (3)
    CD/DVD - Eject Stuck (4)
    CD/DVD - Eject Stuck (5)

Maybe you are looking for

  • Can I delete unneeded pages in a photo book template?

    I finished my first book in IPhoto and found that I do not need all 20 pages for the softcover book that I want.  Does the print job by Apple only alow 20 pages? Can I delete the blank, empty pages?  Or, do I have to spread out the photos and text ov

  • Generics, syntax error

    hi, I have a class : *public abstract class Action<M extends Message> { ... }* and a subclass : *public class ActionValidateConnection extends Action<MessageValidateConnection> { ... }* MessageValidateConnection is a class extending Message. Until th

  • Flex panel not shown as disabled.

    I am creating a flex panel and a C++ plugin for Photoshop CS5 and CS6 on both Win and Mac. My C++ plugin captures events like layer selection change, document view change etc and dispatch events to flex. In flex I register these events and appropriat

  • Show microsoft.sharepoint.standardmenu for FBA Users only

    HI, I want to hide microsoft.sharepoint.standardmenu that i have added with elements.xml and it should be visible to FBA users only and not to windows users. How could i do that?

  • White spot at to left corner when restartet from Hibernation

    Hi, if i switch my yoga with Windows 8.1 in hibernation mode and start it again, i have on the windows desktop (also on running windows programs) a white spot on the left top corner. On the start screen and on Windows modern apps the spot does not ap