Dat job keeps running in stealth mode

Hi
can anyone help me with this very bizzare ( may be normal ) issue.
we started a job to load data from R3 using IP.
After 4 hours I notice lots of data being pulled and everything looks fine.
Then I get a request to kill the job.
I look into R3, sm37, the job is not there ( should have been under BIWremote ).
I look into R3 sm66, sm50, nothing from BI server.
I look into sm37, sm50 and sm66 in BI server. Nothing there.
yet the records count continues to increase in RSMON and the status stays yellow.
How to find and stop that freakin job........please help if you can.
thanks.

Hi,
Please check the load status in RSMO -->select the load --> goto the details tab -->check DATA selection ended in Extraction messages.
If you don't have the DATA selection ended in Extraction messages in details tab of load monitor .i.e..
data load extraction not ended or it is still running or It is missed some TRFC's.
To check the above please follow .
1.Jus take the load request from rsmo like ''REQU.......'' and take this reqest then goto SOURCE SYSTEM give t.code SM37 check BIREQE....."(copy the req). If you have this request it is still running.
2. if it is completed then check any PSA Process for load in BI system.
3. if the PSA Process couldn't find then check the TRFC;s
I think you can trace your load status through avove .
Regards,
Krishna.

Similar Messages

Cisco Prime 2.0 - System-Defined Jobs keep running

Hi PI Experts,
The following two jobs keep running for two weeks. Is it normal?
They are under Job Dashboard -> System-Defined.
Not sure what are they for. Cannot find them with google.
Is there any way to stop them from running if it's not normal?
SAM_Poller_22_15_GETVPNPoller_-253935627
PollerJob
In-Progress
Running
2014-02-13 12:12
SAM_Poller_22_15_GETVPNPoller_961682338
PollerJob
In-Progress
Running
2014-02-11 12:10
Thanks
Cedar

My 2.0 box has 4 SAM_Poller Jobs all of which have a Last Run status of Success
SAM_Poller_700_15_CPU_622922702
SAM_Poller_700_15_DVAVAILABILITY_2064595572
SAM_Poller_700_15_ENVTEMP_-477657161
SAM_Poller_700_15_MEMORY_-1199548056
The names of mine indicate Memory, Envmonitoring, CPU and Availability-
By the looks of the names on your two processes that aren't finishing it appears they have something to do with VPN.
This raises the question: are you monitoring any devices that are VPN capable? If no, perhaps you could disable that functionality on the monitored device...

Database Job Keep Running

Hi
Oracle 11.2.0.1
AIX 5.3
Last night one scheduled DBMS job was keep running. I did find that tablespace was filled up and this job was keep running. finally Archive log filled up.
I don't know why DBMS job did not give any tablespace error and terminated.
Is there anyway if tablespace filled up then dbms job suspend or stop ?
please let me know.
Thanks,
Vishal

but job did not give error and keep trying to runOracle only does what you asked it to do based upon how YOU configured the DB & OS environment.
The problem is/was you & not Oracle's.
Edited by: sb92075 on Apr 7, 2011 12:42 PM

Automatic Transport jobs keeps running

Hi,
I have scheduled an automatic transport job:
TMS_0000000001TMS_TP_IMPORT in BIQ to run every 30 minutes. We want to
be able to transports every 30 minutes in BIQ. For some reason it keeps
running. I tried to Shop it and I am unable to stop it. Every time I
try To stop it, I get the below error message: u201CError Locking table
TBTCOu201D. When I try to delete the job I get the message u201CFailed
To lock job u201CTMS_0000000001TMS_TP_IMPORTu201D. Please advise as i can
no longer do any more transports.

Hi,
Did you try killing the same at OS level. Check at OS level how many tp process are running. If more than one are running then kill all of them at OS level. After that delete the entires from TRBAT and TRJOB tables. Also, please refer the below link if it can help.
http://www.basis2048.com/rsbtcdel2-locks-all-of-table-tbtco-1182.htm
Regards,
Sharath

Internet Exployer Running in Stealth Mode

I seldom or never use Internet Exployer, however it loads itself and is running in the background. I tried uninstalling it and it is like the monster who will not die. Even in task manager I could not close it. There were 4 running once today. The last check was 2 and one was ads running. It started when we updated to the 10G plan and since then we are going over 7 to 8.
When I went to my local store with this problem they were aware that my high useage was Internet Exployer. They told me to shut m mifi off every time I was not using the net, because In Ex was running even if my pc was off. Any ideas? Has it happened to you too?
Cannot Verizon do something? Maybe they don't care because they get paid more, a lot more when this happens.

A few points:
You're talking to users of Verizon's residential services here. It seems like you're concerned about data usage on a wireless plan using a WiFi hot spot. If you want to talk to users of Verizon's wireless services, visit their forums at http://www.verizonwireless.com/
Verizon (wired or wireless) doesn't support computers. If you have issues with your computer, you can ask other uses in any of a number of forums, use Google to see if you can find similar issues and solutions or pay for support from any of a number of companies.
Finally, IE doesn't just eat cycles and download stuff in the background. If you don't use it, it does nothing. If you are detecting unexpected IE usage, chances are pretty good that your computer has a virus or malware. Get a good Anti-Virus program and use it, always. Microsoft Security Essentials is an excellent, free option.
Good Luck.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Data connection keeps disappearing in Stamina mode

I'm in the UK on the Three network. I am using Stamina mode with Extended usage enabled to save power, but am seeing a consistent issue where, after an hour or two, the phone completely loses it's mobile data connection and will not reconnect without rebooting. This makes Stamina mode totally useless as it is not reconnecting when the screen is turned on.
The signal indicator on the phone shows no "H" symbol when this happens, yet About -> Status indicates HSPA is present but mobile data is disconnected.
I have the latest firmware installed.
Solved!
Go to Solution.

You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Corporate Verizon running in stealth mode - really?

To Whom this Concerns, I am and have been a loyal Verizon wireless customer for years and until most recent years and months have been satisfied with service and more importantly (COST of SERVICES).
The above said; while the board of Verizon Wireless continues to raid the customers wallet for like services that other providers can apparently provide for ruffly half the cost - I would like to offer some genuine ways business that should be done while at the same time your taking from your customers.
First - how about providing a direct link to the CEO of this company - stop hiding - be proud of the service you provide and if you are proud and stand by your commitment of ethical business then this should be right up front on your website and or thru TV spot service announcements.
Listen to your customer - be a partner - not a leach - don't prey on the customer that has made a choice to do business with you << this goes a long way.
Reducing your rates especially for those customers that have been loyal and have multiple lines seems quite in-line with doing good business and while you must answer to the board of directors, your business is currently near 100 billion yearly, this should provide well for corporate bonus payouts but does very little for the average consumer that at the end of the day is putting those very bonus payouts in your pockets.
"Service is service" the act of charging a premium based on brand rather than service or cost of services provided is quite disingenuous.
You now offer "rewards points" , if these are truly rewards points then your customers who have earned them should be able to use them as well to purchase gigabyte service, minutes, or as a subsidy to their monthly bill - this would also go a long way.
Discontinue the act of offering a extended service such as the additional 5 gigs of data for $20.00, instead now you have upped this to $40.00 for a reduced amount of service to 4 gigs. This is not a commodity, this is simple cost of services rendered - treat it as such instead of the continual barrage of attack on your customer.
I look forward to some answers that are worthy of my time that has been spent here.
Regards, C. Meek

Well you will be sitting there waiting. This is a peer to peer forum and customer service reps only occasionally drop in. Go back to the verizon main page and click on the contact us link. Or call 8009220204.

Why is my Firefox running in "stealth mode"?

Many times when I close out of a web page and I go to restart I get a Message telling me "Firefox is already running and I must close it out before I can start another web page, but I have already closed it out and there is no Firefox web page there to close out as I have already closed it out. Sorry for all the "closing outs" but that's the only way I could figure to explain it. Any help would be greatly appreciated. Thanks!!

See https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding#os=win&browser=fx8

Retraction for Capitals wbs keep running never end..

Hi all;
While running a retraction for capital wbs using this 'UPR_COST_PLAN_EXEC' FM, the job keeps running for hours never end, I can see the messages at the task bar 'Data summarized...' , 'data transfered..' etc..I don't get any error message or anything.
This is not a new function, it has been running well in the past and I never had any issue. We run this every month to retract monthly updates into R/3, The only thing I have changed between last month and this month are
On the planning level Version = 5 (I had 4 last month) this is the version this data gets stored in R/3.
Also the parameter grp version = 5.
Those should not cause this issue...Did anyone had this issue earlier? Pls write to me...as this is a production issue..I will assign good points.
thanks.
BK

Got it figured out guys...thanks.
Buddhi R Kalakheti

Dbms_scheduler job neither succeeds nor errors its just keep running for ever

Hi All,
I am trying to run a shell script from plsql using the dbms_scheduler, job is getting created and it keeps running for ever without success or error.
Can some please help me where I am doing the mistake.
Thanks
DB Version:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
Plsql Script:
BEGIN
   DBMS_SCHEDULER.create_job (
      job_name              => 'SFTP_PAYMENTECH_BATCHID1',
      job_type              => 'EXECUTABLE',
      job_action            => '/app07/ebdev/ebdevappl/xxtpc/bin/test.sh',
      number_of_arguments   => 1,
      enabled               => FALSE,
      auto_drop             => TRUE,
      comments              => 'SFTP Batch File to Paymentech');
   DBMS_OUTPUT.put_line (
      'Job Created Successfully:' || 'SFTP PAYMENTECH BATCHID');
   fnd_file.put_line (
      fnd_file.output,
      'Job Created Successfully:' || 'SFTP PAYMENTECH BATCHID');
   COMMIT;
   DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE (
      job_name            => 'SFTP_PAYMENTECH_BATCHID1',
      argument_position   => 1,
      argument_value      => '66667'                        /*v_printer_name*/
   DBMS_SCHEDULER.enable (name => 'SFTP_PAYMENTECH_BATCHID1');
EXCEPTION
   WHEN OTHERS
   THEN
      fnd_file.put_line (fnd_file.output,
                         'Error while creating the Job:' || SQLERRM);
      DBMS_OUTPUT.put_line ('Error while creating the Job:' || SQLERRM);
END;
Shell Script which I am calling:
#!/usr/bin/ksh
FILENAME=$1
PMTHOST=198.xx.xx.xx
PMTUSER=xxxxx
PMTPW=xxxxx
a='apps'
b='xxxxxx'
c='EBDEV'
INST=`echo $TWO_TASK | sed 's/_BALANCE//'`
echo INSTANCE: $INST
echo
File_Path=$XXTPC_TOP/iby/out
echo File Name: $FILENAME
echo $PMTHOST
echo $PMTUSER
echo
echo Date: `date`
echo
echo File System User: `whoami`
echo
echo Instance: $TWO_TASK
echo
echo File_Path: $File_Path
echo
echo PMT SFTP
# Fetch file using MBATCHID as File Name
cd $File_Path
echo
echo -----------------------------------------------
echo
echo Current File          :$FILENAME
l_date_time=`date +%Y%m%d%H%M%S`
echo SFTP Remittance File
# sftp $PMTUSER@$PMTHOST << EOF
lftp -u $PMTUSER,$PMTPW sftp://$PMTHOST << EOF
lcd $File_Path
cd test/945299
put $FILENAME
exit
EOF
#`sqlplus -s apps/tpcdev2013@EBDEV @try.sql $FILENAME`

Have you tried running the script manually to confirm it isnt just hanging on input for the lftp ?
You could add a -o <file> to the lftp command line which would output debug info into <file> so you could see.
Creation of the job looks fine so as GregV said, what output do you have in ALL_SCHEDULER_RUNNING_JOBS and any ADDITIONAL_INFO in the ALL_SCHEDULER_JOB_RUN_DETAILS or in $ORACLE_HOME/scheduler/log that might indicate what the problem is ?
If this answer was helpful, please mark as helpful answer.

Background Job Still Running - Data Can Be Displayed Only Msg Populated in Maintain Versions (OKEQ) Screen

Hi,
I try to create 2013 FY in "Setting for Each FY" in OKEQ - Maintain Versions unfortunately I have created Null FY, try to delete Null FY on the time it will ask Job schedule, I have cancelled the job & reopen Maintain Versions (OKEQ) screen on the time system populated the msg "Background Job still running - Data can be displayed only"
In Settings for Each FY screen there is no New Entries button, all FY are blocked status, changes was not allowed.
How can I resolve it.
Waiting for your valuable suggestions.
Regards,
Nageswar.

Dear Rajneesh Saxena
Thanks for your prompt reply.
Yes you are correct, on the time of deletion it will ask Background Job Process, for immediate deletion must & should select "NO".
While "Settings for Each FY" screen populates message "Background Job Still Running - Data Can Be Displayed Only" open screen in display mode enter the command "=KILL" in command bar press enter, then you will allow to changes get New Entries button also.
Problem is solved
Regards,
Nageswar.

Biztalk stop (running- downloading data)job

Hi,
I have a scheduler a job to download data but its running form last two days (keep downloading data). i dt know when it will finish.
Could you please suggest me, steps to stop this job (Abundant that running process)?
Many Thanks.

If you want to stop BizTalk, just stop all your BizTalk Services (Host instances).
In Powershell:
get-service -name "BTS*" | stop-service
But I would still like to know more. What do you mean it has been downloading for 2 days? Is it the same file it is trying to process? Is there just so much data on your Source system that BizTalk needs to work for days??
Morten la Cour

I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

You run Windows in Parallels or Fusion. Then in Windows you install the program.

I have Process chains as well as some jobs which run.Most of the data is l

Hi Experts,
I have Process chains as well as some jobs which run.Most of the data is loaded through custom ABAP extracts.Now where to check for these jobs and how to understand them.I know that we can check for jobs in sm37.But how do u load data using these jobs.Please tell me in detail how and where u execute these jobs.Please give me an answer

For creating a job use..transaction sm36.Define start condition ,periodicity. etc..
To monitor it you can use--sm37 job monitoring
Various options in sm37 which you can use after check(tick) on any particulur job..and then click on joblog.
To view variants of any job click step>goto(top menu bar)>variant.
,rsmo ( process monitor) -- to view data load--you can view there data load daywise..here to view any particulur data load..click on infopackage /dtp/datasource in rsa1 and click on the monitor icon at the top..system will show you the concerned dataloads in process monitor
For monitoring process chains--go in RSPC and double click on the chain and click on log button(yellow color) select data range..and you can view the status of a chain....red if failed and green if success..and yellow if still running.
Also in sm37 you can find the status of a process chain by searching with job name---bi_process_trigger.
To execute chaingo to RSPC>double click on the chain-->schedule(F8)
If you know the data target of loading ,go in rsa1 and right click on the data target and select manage and you can view the request being loaded.

I keep getting a Fatal Exception Error on start up, and I can only run in safe mode on my dv6

I keep getting a Fatal Exception Error on start up, and I can only run in safe mode on my dv6, can anyone please help? I don't really want to reset it back to factory defaults as I will have to re-install everything. I have tried going back via system restore, but it keeps telling me that there are no restore points? I am running Windows7 64 bit OS
Thanks in advance.
This question was solved.
View Solution.

Hi,
Start the notebook in Safe Mode and let Windows fully load. Hold down the Windows key and press R. In to the Run box type msconfig and hit enter. In the following window, click the Start up tab, remove the tick next to each start up item and then click Apply to make the change. Restart the notebook and see if it now boots normally. If it does, re-enable one start up item at a time, click Apply and reboot to check if it still runs ok. Keep doing this until you encounter the problem and you will know the last program you set to start is causing the issue.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Dat job keeps running in stealth mode

Similar Messages

Maybe you are looking for