Data and Information Menu Fields Cut Off (Photoshop CC)

Since I've updated to Photoshop CC, something has changed in the way the information and data fields display in menus and windows to where I can't see them fully or can't see what I'm entering into them. See the image below for reference.
This is happening to Photoshop CC (both standard and 64-bit version) and somehow has applied this to my CS6 versions of Photoshop. I've updated my other programs to CC (Illustration and InDesign) and don't have this issue. They are working fine.
I've done the following to correct the issue, but have not been able to resolve the issue:
- shut down and restart computer
- change image resolution for my monitor
My last resort will be to uninstall/reinstall the Photoshop CC app, but was checking to see if anyone knew what is causing this.
Thanks for any help you can offer.

Do you have some other kind of theme or program (window blinds for instance) that modifies windows
or perhaps an third party desktop manager?
Is that windows 7?

Similar Messages

  • Field Cutting Off Numbers

    I am having trouble with a field cutting off most of a number when 0.00 is present. The field is named FL025, and pulls information from an outside source. It is right-justified with a 10 digit character limit. It is formatted as a number. This exact same field on other forms works perfectly. I cannot figure out why it keeps cutting off most part of the number on this one. It isn't the field size, no matter how big I make the field, it still cuts off the numbers and half a zero is all that shows, or perhaps it's a parenthesis. I'm not sure. See clip below.

    We are trying to help you find the problem. There maybe some issue with the format you selected. The suggested change is for testing and observation only. This is part of the debugging process. You could also use JavaScript to examine the field, but I do not think you can do that.
    Normally the parenthesis do not display for zero unless the value is a negative number smaller than the amount the field is formatted to display and it is possible to enter a digit with more than 10 digits especially for decimal values.
    An image does not provide much information. Many computer programs have data in a different format than what is displayed.
    Can you post a link to a sample form with the data?
    If the data supplied is formatted with currency symbols and a thousand separator the 'Number:" format will not display it properly. The number format only accepts the numeric digits, a leading sign, and a decimal point. The decimal [point might also need to be the "." and not ",". If it is a "," there maybe a script in the other forms that make the correction when the outside source is quired.
    What version of Acrobat are you using? Database access has been removed for Acrobat forms but remains for LiveCycle forms.
    Is the form being populated by a direct data connection or through some other software?
    Have you tried talking to your companies IT support?

  • Adobe changed the menu short cuts in Photoshop CC?

    Hi,
    there are some changes in the menu short cuts in Photoshop CC for Windows:
    For many versions: ALT + "I" --> followed by "I" opened the "Image Size" in the "Image" menu.
    Now, in CC, ALT+I -> + I opens "Analysis" ... why did Adobe changed this? And how can I return to the old standard behaviour?
    Thanks
    Konrad

    Yep.  Lots of shortcuts depend on the order and timing when using them.  But Alt brings up the menu bar on most Windows applications, from where you can see which letter is underlined to action a specific menu.
    A good example of this in Photoshop (later versions) is presing Alt while using the Brush.  Initially the Eye dropper becomes active, but pressing the right mouse button changes it to brish size and hardness control.  But most of this sort of thing becomes pure muscle memory eventually.
    It's like typing.  Your fingers know where all the letters are without you thinking about it, but if someone asked where a particular letter is on a QWERTY key board while you were away from your computer, you might have to think very hard before answering them.

  • I am trying to play cafe world and the screen is cut off so i can not play

    i am trying to play cafe world and the screen is cut off so i have half of a screen so how do i make it larger so i can play of i will have to go back to explorer

    Please do the following:
    * Update to Firefox 29 [[Update Firefox to the latest version]]
    * [[Remove recent browsing, search and download history]]
    Also, I strongly suggest updating to Windows 8.1 update 1 as plain old windows 8 is no longer secure or stable.

  • I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies. My monitor is a 23 IN' acer s series.

    I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies(although I can't really tell. My monitor is a 23 IN' acer s series. I just installed the drivers for my monitor with no change. I think I have a CD somewhere for my monitor maybe it has some kind of program in there that can help me. I can post a picture if I need to. Thanks

    No work around that I know of.
    Apple Feedback http://www.apple.com/feedback/

  • How to store/manipulate Date and long text fields with Dictionary project

    I am able to save string values into my backend (SQL Server) database in my web dynpro project but I am getting errors dealing with my date string and my long text (comments) field. 
    I want to figure out both how I need to define the fields in the dictionary project, how to define the context variables in web dynpro, and how to code the statements to pull the values out of the context and into fields I can use in my SQL insert. 
    Currently I have the date defined in the dictionary project as "date" and the comments as a 256-character string. 
    In the web dynpro context I have the date field defined as "date" and the comments field defined as "string".  Should I define a 256-character string type and use that as field type??
    In the code I am using the following to get the values:
         String s9 = (String) wdContext.nodeReceipt().getElementAt(wdContext.nodeReceipt().getLeadSelection()).getAttributeValue("Comments");
    String s5 = (String) wdContext.nodeReceipt().getElementAt(wdContext.nodeReceipt().getLeadSelection()).getAttributeValue("DateReceived");
    SimpleDateFormat sdf = new SimpleDateFormat("dd/mm/yyyy");
         try {
         Date dt = sdf.parse(s5);
         } catch (Exception e) {
              e.printStackTrace();
    I then try to insert all of my values with the following code:
    InitialContext ctx = new InitialContext();
      javax.sql.DataSource ds = (javax.sql.DataSource) ctx.lookup("jdbc/SAP/BC_JMS");
      java.sql.Connection con = ds.getConnection();
      java.sql.Statement stmt = con.createStatement();
      stmt.executeUpdate("insert into AVD_GEN_REC(VENDOR,DATE_RECEIVED,TOTAL_PIECES,LOGGED_BY," +
           "ADDRESSED_TO,BLDG_NO,CARRIER,TRACKING_NO, COMMENTS) values('s1','s5','s2','s6','s3','s7','s4','s8','s9')");
       } catch (Exception e) {
             wdThis.wdGetAPI().getComponent().getMessageManager().reportSuccess("Exception "+e.getMessage());
    Any help/ideas would be appreciated...

    The comment error seems to have resolved itself but I still get an error with the date field:
    Exception The SQL statement "INSERT INTO "AVD_GEN_REC" ("VENDOR","DATE_RECEIVED","TOTAL_PIECES","LOGGED_BY","ADDRESSED_TO","BLDG_NO","CARRIER","TRACKING_NO","COMMENTS") VALUES ('s1','d5','s2','s6','s3','s7','s4','s8','s9')" contains the semantics error[s]: type check error: new value (element number 2) is not assignable to column "DATE_RECEIVED" 
    The DATE_RECEIVED is defined in the data dictionary as "date", the context variable "DateReceived" is also a "date", and the statement to pull d5 is being stored to a "Date".  Is there a difference between the "Date" and "date"?
    Date d5   = wdContext.currentReceiptElement().getDateReceived();

  • My iPhone 4S is not recognised by my computer when I try to sync. I am looking to upgrade, is it just easier to purchase a new one, then manually transfer data and information?

    My iPhone 4S is not recognised by my computer when I try to sync. I am looking to upgrade, is it just easier to purchase a new one, then manually transfer data and information? I don't want to try syncing and backing up data to just lose it all. As the new one I plan to get is a newer model, I'm thinking it is just better to do it manually, but then I have the issue of syncing the new one to start.

    Hello Smeebo,
    Thank you for asking your question! It sounds like your iPhone is not recognzied in iTunes when you connect it to back it up, or update the device. I would try the troubleshooting in either of these 2 articles depending on what operating system you have:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    or:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Export file (rtf and doc) has a cut off field

    Hi,
    I am using CR10/VB6/Oracle10.2
    CrystalViewer shows the report preview fine then click the envelope icon to export file
    (rtf or doc).
    When I open the exported file (.rtf or .doc), there are some fields in the file is cut off .
    Half of line of record is cut off horizontally.
    This problem does not happen always. I don't know it depends on the record or not.
    Does anyone have a same problem?
    Thank you

    Hi Sachiko
    CR X is not tested with Oracle 10.2. This issue may occur since some of the dlls may not be supported. Hence you can try out the following:
    1. Apply the latest Service Pack and check if you get the same issue.
    2. Try using another Viewer and check if the issue still persists
    3. Try upgrading CR X to CR XI R2 since CR XI R2 is tested with Oracle 10.2
    Regards
    Purva Naik

  • Why does the menu get cut off even if the project is widesrcreen?

    I made a widescreen project in iMovie, exported it to iDVD, and chose a widescreen theme. It looked fine on my computer but when I burned it and played it on my home DVD player, the words were cut off. I also noticed that when played on some TVs, my movie (although widescreen) played as full screen and therefore, cut off some of the footage. Does anyone know how to fix this?

    HOW TO MAINTAIN 16:9 ASPECT FROM IMPORT TO BURN
    This is the way I do it. There is no compulsion on you to do it my way, but this works (for me). I started this method before iMovie and iDVD were upgraded to 6.0.3, and because not all elements of the various iDVD themes (particularly the pre-iDVD 6 ones) are consistent in keeping to 16:9 throughout the process.
    The widescreen preview works just fine when you check your finished project within iDVD. The problem only happens when you either burn a project or save it to an image.
    A bug in iDVD 6, particularly when working with PAL, and which has been reported to Apple, is that the sub-menus in many of the themes (the chapter settings) default to 4:3 aspect, NTSC and mpeg 1, instead of the desired 16:9 in mpeg 2 in PAL. This may be partly a leftover from iDVD 5 or even a newer ‘feature’ of iDVD 6. Either way, it is annoying when it happens, and we must hope Apple cure it in iDVD 7. In the meantime here is my failsafe workaround, which sounds a lot more complicated when reading about it, that it is in practise.
    Living in the UK, I use PAL (25 fps). Wherever you see a reference to PAL (25 fps) in the following you may substitute NTSC (30 fps) in the various settings mentioned (if you don’t live in Europe), the basic idea is the same. I still use this method, and take these steps, regardless of whether it is always necessary. Worst case scenario: it would have worked anyway. Best case scenario: it works perfectly where it otherwise wouldn’t!
    The object of the exercise is therefore to ‘fix’ all constituent parts of the project (video, titles, theme, effects, even audio!) in the desired 16:9 aspect to avoid producing a DVD where the movie is in 16:9 and the menu is in 4:3 or where other irritating surprises lurk in your project, which you only discover after burning a coaster!
    First go to http://www.mydvdedit.com/index.php?lang=english and download myDVDedit. This is shareware although the download is free. Send the guy a few dollars/euros, he deserves it. While you are there, read all about it. Now install it in your Applications Folder. You will need it later.
    You have finished your iMovie project with music, transitions and so on, and saved it to you Movies Folder. Before you started the project you naturally set it to DV Widescreen.
    Open iDVD. Give the project a name, and save it as Widescreen if it didn’t default to the same aspect as your iMovie project. Now import the iMovie project into iDVD, choose a theme (any theme you like, even if it prefers to stay at 4:3) and save the project. Do what you would normally do to the theme and its drop zones. Save the project.
    Now save as Disk Image on your desktop. Leave it there for the moment when it has finished/appeared.
    Open your Movies Folder. Create a new folder. Name it PROJECTNAME – TS FILES (where ‘projectname’ is the name of your project!). Close the folder. You can of course call it anything you like, but this aids identification.
    Now double-click the disk image on your desktop. It contains two folders: AUDIO_TS (which is empty, but please pretend that it isn’t) and VIDEO_TS. Drag and drop these to the folder you created in your Movies Folder. (This takes a moment).
    Click on the AUDIO_TS folder and go to Get Info in the file menu. Right down the bottom is where you have to change the permissions. Under ‘Ownership & Permissions’ change this from Read Only to Read & Write. Click the small triangle next to Details, scroll down and click on ‘Apply to enclosed items’. You will be asked for your root password. Close the get info window, and now click on the VIDEO_TS folder and do the same. Close the Projectname-TS Files folder. You have now allowed yourself to change the properties of the contents of those folders, which leads us to the next all-important step.
    Open myDVDedit. Go to File and open the projectname TS Files folder. By all means stare at it shock and awe, but don’t bother finding out what it can do, except for the following:
    Top left you fill see a list of files. Lower centre you have a large window. On the vertical menu to the left of that, click te middle one (VTS or VMG).
    In the window at the top left, ignore ‘First Play’ (if there was anything to correct in that, myDVDedit will have done so and told you).
    Click on VMG Menu en (English). Now the whole thing springs to life.
    Set Coding Mode to MPEG-2 (if it isn’t already)
    Set Standard to PAL (or NTSC if that is what you want)
    Set Aspect to 16:9 (not any of the other options)
    Now save the file.
    Click on VTS Menu 1 en (English) and repeat as above.
    Click on VTS Menu 2 and repeat as above.
    You have now permanently ‘fixed’ the entire contents of the TS folder (the disk image) in 16:9 aspect. Close myDVDedit – you won’t need it again until the next project!
    If you have Toast 7 Titanium, open it. ‘Select DVD-Video from VIDEO_TS’. Choose Select from the main Toast window and select your projectname-TS Files folder. You are now ready to burn! You can set the burn speed (2x recommended) before the burn commences. Allow Toast to verify the burn before you eject the DVD-R disk.
    If you don’t have Toast 7, then I assume you can burn the projectname-TS Files folder (disk image) via Disk Utility. I say ‘assume’ only because I have never tried it that way.
    Either way, you now have a DVD which will play as 16:9 widescreen on any TV set, even the old ones where you can’t ask it to letter-box.

  • Opened a .ai file, found that left and right side are cut off (landscape vs. regular the issue?)

    Information all in the title.  I open a .ai file and the left and right sides of the image are cut-off based on the "page" box

    Did you open it in a lower version?
    It looks like you opened the PDF part of the file instead of the AI part.

  • SharePort news and announcement web part cuts off news item.

    Hello,
    I am not sure where to turn to, but I have a web part on a SharePoint 2013 page where it displays news and announcement items.  4 lines of text are displayed, but words are cut off.  For example:
    The day was grey and stormy in the middl...
    Read More
    Is there a way to not have SharePoint cut off words and display the whole word before it adds the ... and the end of text?
    Is there a third party web part that does a better job at displaying news?
    Thanks,
    Paul
    Paul

    This feature is not available out of the box, make sure that if there is any JavaScript code added to wrap the text and display read more link. Refer to the following post for more information
    http://www.learningsharepoint.com/2013/04/07/styling-announcements-with-javascript-using-js-link-in-sharepoint-2013/
    http://randomdust.com/blogs/ryan/archive/2007/09/27/customize-announcements-summary-view.aspx
    Cheers,

  • Running windows 7 64bit. since upgrading to newer versions of itunes,display is not right. window controls and side scroll are cut off. any ideas please.

    i'm running Win 7 64 bit. since upgrading to newer versions of itunes,the display is wrong. window controls and side scroll bar are cut off. any help will be appreciated. I've set itunes compatibility setting to Win 7.

    Hi @prdstudio3 ,
    Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • When I try to save something the bottom of the save menu gets cut off. Any fixes?

    Hey All!
    I'm not very computer knowledgeable, so I'm hoping someone can help me with this. Any time I hit 'save as' the 'save menu' extends down, but goes down too far. The bottom ends up being cut off and I can't see any of the buttons. Is there a way to fix this? It's not a huge problem, but it's annoying. Thank you ahead of time for any help you can give. I have iwork'09 and Mac OS X 10.5.8.

    In the Menu Bar go Apple > Dock > Turn Hiding On.  Then open a new page and Save. When the Save window opens you will be able to grab the bottom corner and make the window smaller, so that it clears the Dock area. Cancel the new document and Turn Hiding Off.
    Walt

  • Motion cutting off photoshop layer

    I am having a problem with motion cutting off a part of a PhotoShop layer. I've had this problem a few times and thought I had fixed it. The problem is that the entire sequence looks good in motion, but when I bring it into Final Cut or I export it using Compressor, the layer is cut off as it is moving back and scaling down. Anyone have any idea how to fix this?

    Check the Fixed Resolution box for the Motion layer that contains the Photoshop layers. Motion automatically turns on Fixed Resolution for Photoshop files to match the original size of the psd, < </div>
    Score! I didn't know that. Thanks, Q, another gotcha for the already overloaded memory banks.
    bogiesan

  • Adobe Pro X and Bates/Page Numbering Cuts off 1/3 of Page - Please Help

    Hello!
    We have been using both the bates and page numbering features in Adobe Pro X on Windows 7 with various .pdf files.  However, when we scan files using Adobe Pro 6 on XP in combination with a Visioneer/Xerox Documate 632 scanner, and when adding bates or page numbers to these files, the image on the page shifts and cuts off one-third of the image.  (We use Adobe Pro 6 and XP with this scanner because Pro 6 is not compitable with Windows 7 and Pro X requires too many mouse clicks when compared to Pro 6; thus saving time in the field.  We like the page and bates numbering feature in Pro X because it shrinks the document to avoid overwriting texts and graphics.
    Do you have any suggestions on how to resolve this issue aside from using Pro X with the time spent using the additional mouse clicks?
    Thank you in advance!
    LB1090

    Hi Suzbat,
    If you try to print any other document from any other application. Did you check, are you facing the same issue or not?
    Have you tried to install latest drivers of the printer.
    Regards,
    Ajlan Huda.

Maybe you are looking for