Data and time characteristics found in character and keyfigures?

hi all,
I can find date and time found in both characteristics and keyfigures. Can anyone tell me in which scenario we shall select date and time considered in characteristics and when shall we select date and time for keyfigures.
can anyone explain me with an scenario.
regds
hari

Hi,
date and time will be key figures in the case if you want to do some calculation based on them like subtraction or multiplication ( you can do it i also thorugh formula valriables but it has it's limitation)and they are not going to be used as drilldown or for selection variables in the reports.
If you want only selection and drilldown on then then you should go for char.
Thanks

Similar Messages

  • When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

    When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

    When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

  • When attempting to format region and set date and time the busy icon appears and seems to stay like this?

    when attempting to format region and set date and time the busy icon appears and seems to stay like this?

    Click on DU's Partition tab when you have the raw drive name selected, then set it to one partition, Mac OS Extended. If it crashes or freezes, it is finding a bad block and can't write.
    In any event, if you want to use the drive, and have not zeroed it before, you should now.
    Click on Erase -> Security Options -> Zero out data. Still with the full drive selected and not any partition(s).
    Then repartition the drive if needed.
    Boot from the DVD if that doesn't work. And no, TTPro has never mapped out bad blocks let alone create partitions.
    Disk Utility in 10.4.8 is quite good, excellent in fact. No need for an alternative.
    Your eMac drive may need to touch of Disk Utility itself. FSCK from the command line, clear the caches with Applejack along with check for corrupt plists. Between Disk Utilty and Applejack (free/shareware) never had to use TechTool Pro - or at least there weren't any errors after those two got done. But if you want a good 3rd party, pick up Disk Warrior 4.

  • Chat Messages do not show date and time of buddies logging in and out.

    If I keep my buddy chat with friends open, it used show the date and time that they log in and out. Now after updating to Yosemite, it does not and also will show the last message exchange as something way older that the last chat session. Not the actual last exchange. Why?
    Is there a setting that I can keep the date and time log. It's important for work conversations. Thanks.

    I realize that my needs are outside of the normal editing workflow. I am a private investigator and last week I shot over 6 hours of surveillance video on a Sony video camera. Within this 6 hours of video there is at most 2 minutes of actual footage of my subject. So what I wanted to do was just import the parts of the clip I want, so I can avoid importing the whole 6 hours, and then add a text title of some sort that shows the date/time. My problem is that once I get this clip I have easy way of establising the TOD short of taking the clip capture time and then counting up using the SMTPE Timecode. In this regard iMovie makes it easier because I can just hover over the clip and see the TOD of that specific frame. iMovie on the other hand would force me to import the whole 6 hour video so i'm left moving between both programs which is less than ideal.

  • I have checked the box "display date and time on the Menu Bar" and it does not work.  Using OS X Yosemite 10.10.2  Anybody have a fix?

    I have checked the box "display date and time on the Menu Bar" and it does not work.  Using OS X Yosemite 10.10.2  Anybody have a fix?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • Date and Time on Mac OS X and Windows XP running diffrently... (Boot Camp)

    Why the time differently when i change OS? I was used network time server on my both OS, but the time still wrong after i changed operating system... How can i solve this problem?
    Thx.
    Kelvin

    Hi Kelvin,
    The answer to your question lies within the Boot Camp Beta - Installation & Setup Guide. Under the Troubleshooting section on the last page. I quote:
    My computer doesn’t always show the correct date and time.
    The Windows XP and Mac OS X operating systems handle your computer’s date and time information differently, so the date and time may be different when you switch operating systems.
    For best results, use a network time server. Resync the date and time whenever you switch operating systems.
    To resync your date and time:
    In Mac OS X, reset the option to “Set date & time automatically” in the Date & Time pane of System Preferences.
    In Windows, click the Update Now button in the “Date and Time Properties” control panel.
    Alternatively, you can manually set the correct date and time when you switch operating systems.
    End quote
    RD
    Message was edited by: Red Dwarf - Beaten by the quick typing of NH Sullivan

  • HT1551 When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.

    When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.

    Were any of the troubleshooting steps in the article from which the question was posted tried?

  • Date received time is wrong on Mail and people not getting attachments

    Since I moved to this new MacBook Pro with the intel processor from my iMac G5, this latest version of Mail seems to be more problematic than the last:
    I can not get the time displayed in the list of emails to be correct. It keeps displaying a time that is 2 hours behind the actual time the email is sent. Meanwhile my system clock is on the right time and I would imagine it is getting it from there.
    My other issue is that more now than before, people are telling me they are not getting the Microsoft Word documents that I am sending.
    My last issue is about importing mail, For some strange reason when I have imported mail from my other computer to this one as I like to have the messages I have sent saved, Mail skips dates. I have repeated the steps a few times thinking I could resolve the problem and now I have just ended up with duplicated messages.

    I can not get the time displayed in the list of emails to be correct.
    It keeps displaying a time that is 2 hours behind the actual time the
    email is sent. Meanwhile my system clock is on the right time and
    I would imagine it is getting it from there.
    Have you checked your time zone setting - System Preferences > Date & Time under the Time Zone tab?
    If correct, the date and time displayed in the received column in Mail or with any email client is determined by the incoming mail server for the account. Check the long message headers for the received message - the time shown for the first received line.
    My other issue is that more now than before, people are telling
    me they are not getting the Microsoft Word documents that I am sending.
    If included with the sent message in the account's Sent mailbox, anything that happens to an attachment after being successfully sent by any email client is usually a problem with the recipient's incoming mail server.
    My last issue is about importing mail, For some strange reason
    when I have imported mail from my other computer to this one
    as I like to have the messages I have sent saved, Mail skips dates.
    I have repeated the steps a few times thinking I could resolve the
    problem and now I have just ended up with duplicated messages.
    Which OS X and Mail.app version are you running on your other Mac.
    Unfortunately, the Mail.app import mailbox process is not the best - especially when importing from Jaguar or Panther Mail to Tiger Mail.

  • My iPhone4s turned itself off and will not turn back on unless it is charge data all times. I need help and answers please.

    My iPhone4s turned itself off and will not turn back on unless it is charged at all times. I need help and answers please.

    And we would need more info. "will not turn back on unless it is charged at all times." is pretty obvious: the phone will obviously not turn on unless it is charged.
    Describe your problem clearly.

  • When Mozilla upgraded, it complained that my Adobe Flash Player also should be upgraded. The upgrade downloaded but no icon appeared, and when I found the EXE and ran it, only the Quit button in the dialog window was an active link, so I got nothing.

    The Installation instructions allow for Firefox or IE. I have both, but the IE path was dead. The Firefox path said to use the icon on the desktop - but there is no such icon. The downloaded executable is there, but when I invoke it and read the license agreement, I still only have the dialog window with Quit and Install - however, only the Quit button is live.

    1. There are two different versions of Flash. The ActiveX version for IE, and the Plugin version for Firefox and other browsers. You need to install both versions if you continue to use IE along with Firefox.
    2. Did you close Firefox before attempting to install Flash? Did you download it to the Desktop, because it wouldn't end up there automatically with the default download settings in Firefox?
    Tools > Downloads = does that download show in the Downloads window? <br />
    If so, right-click on it and use '''Open Containing Folder'''. <br />
    Does that downloaded file have '''-ax.exe''' at the end of the name of that file? <br />
    If so, you got the ActiveX version and need to download it again. <br />
    If not, close Firefox while keeping that "containing folder" open. <br />
    Wait about 20 seconds and then try installing Flash.

  • Manual setting of date and time-..

    After finally getting my ATV3 updated to 6.2 via an iTunes restore with USB. I am now stuck at the activating screen with the sub note of setting date and time.
    I have reset and restored multiple times now. Reset my entire network. Disconnected cables and power. Connected via Wi-Fi as well as ethernet cable. All with the same results of hanging at the Activating screen. After skipping the screen, (waited for almost 3 hours this last go around) I inspect the About info and can see the Network Time heading as Skipped (reachable) and the Activation as Failed (Skipped)
    I do know that my ISP blocks NTP requests except to two particular addresses. Since I can’t change that on the ATV, are there any other options?
    My ATV was working OK before the update /restore. Should have left well enough alone. Small Airplay issue started this whole fiasco.

    After trying multiple times to get everything to sync up and more research I found that indeed it is my ISP NTP blocking that is causing my problem.
    I ended up using my cell phone as a hotspot and linked the ATV to it and in seconds flat all my problems were gone!
    I then reset my WiFi to my home network and all is well!
    The ATV is now back to normal with the latest update.

  • Aperture 3.0.3 Adjust Date and Time

    Working on a batch (~3K) scanned images that all need to be adjusted for date and time, the adjustments and so forth. All notes below is with Master images.
    My observations so far with the unpredictable "Adjust Date and Time" function, "D&T" hereafter and some suggestions on improving Aperture.
    0. Always make sure that you start by "edit->deselect all" - even if nothing is selected.
    APPLE: PLEASE MAKE IT SIMPLER TO SEE WHAT IS SELECTED (MASTERS, VERSIONS, etc).
    1. Always use US language selection - Language selection seems to matter for D&T. I am from Denmark, living in US but often switch between US and DK language (to get some special characters). In Denmark we use dd-mmm-yyyy and in use we use mmm-dd-yyyy. When i use the danish locale with the "D&T" function Aperture D&T is totally unpredictable - so stick with US.
    APPLE: PLEASE DONT BE TOO SMART BUT USE THE D&T FORMAT LISTED IN THE D&T DIALOG BOX
    2. D&T time-shift does not work. Unfortunately this 'capability' cannot be disabled - Somehow Aperture check what the time was originally stamped on the image and use this for the new "D&T" - first i though that this was adjusting ~1 sec between images but it seems that Aperture do something like the following (sorry for my non-applescript'ish examples below)
    newTime = "edit->adjust date and time"
    foreach image do
    set time to image.D&T.time
    try() change image.D&T.time newTime+image.D&T.time
    catch () newTime image.D&T.time
    Not good as it time-shift from the original picture - if the time is good this is not a problem but if time (from the stamp) is off (like all of mine) most likely the time will get the date to wrap into the next day (or year if you got a bunch of images)..
    APPLE: PLEASE ADD AN OPTION TO DISABLE TIME-SHIFT in D&T
    3. Dont include DNG - Aperture cannot change the date for a dng and it seems to screw up the time-shift in "D&T" - i think the algorithm do something like
    newD&T = "edit->adjust date and time"
    for each image do
    set D&T to image.D&T
    try() change image.D&T to newD&T
    catch() newD&T = image.D&T
    The problem seems to be that when Aperture work on a image it cannot change it use this images (that it cannot change) D&T for the next images D&T, i got a bunch (a ton actually) of examples
    1994
    1994
    2008.dng
    2008
    When using a different language locale it gets even worse.
    APPLE: PLEASE DO NOT CHANGE THE D&T COUNTERS WHEN WORKING ON A FORMAT NOT (WELL) SUPPORTED.
    4. Always check your trash for images - after i deleted projects (empty, no images) i have found images for those projects in the trash. Cannot explain why this is but i am happy that i checked the trash before emptying - put back works just fine.
    I am currently using the following methodology for my scans.
    1. load in all pics, create albums for years and projects for months - e.g. 1993.0201 <text>, 1998.0327 <text> and sort scans to the correct albums and projects
    2. export each album as separate libraries, open library, fix D&Ts, places and faces. Exit, reopen and check trash for images that should not have been deleted. Clean trash, close.
    - For faces i add a few pics' of recognizable folks - open faces and select from the many suggestions aperture offers - very fast.
    3. Open or import library to master (my master got ~20K pics currently)
    I am interested in learning if i am the 'only one' with Aperture D&T 'problems' or if i am using the tool incorrectly.
    Kenneth

    nathan:
    What type of edit were you making. Have been trying to duplicate that and cannot. I've changed the date and selected the original file to be changed also. Then I edited the file by cropping, changing the exposure and shadows and saving. Both versions are still tiff files.
    Now these are tiff files that I converted over from jpgs with Photoshop as my camera doesn't take tiffs. Don't know if that will make any difference.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • APPLE TV 2 HD model and updated to latest version 6.1.1 since doing that it won't set date and time and tells me my Apple ID and password are incorrect and I know there not. What do I do?

    It connects to internet fine. I have tried restoring back to factory condition and hard wire update by connecting it to my Mac mini .
    The date and time won't set. And won't acknowledge my Apple ID and password......... I am usually tech savy but this has caused me grief .
    Do I need to downgrade my update....
    But can't get any menus until I log in my apple account...
    It can't log into my iTunes account until time and date have been set.
    When I did the hard wire restore connected to Mac mini it wouldn't go past the date and time screen as it wouldn't when I did the wifi update too.
    it just would get past that screen.
    Anyone help!!

    This is the result of a network issue.  Ensure port 123 on the router is open.

  • Dates and times in APO

    Hi All
    I am getting bit messed up with different dates and times in R/3 and APO. Could you please provide me some details on the relation and where these dates and times are maintained in APO  and R/3
    1. Transit Time:
    Is it Total Replenishment time, Planned Delivery Time
    Is it maintained in Purchase Infor Record or Transportation lane
    2. Material Availability Date
    Can PPDS works on MAD or only on Delivery Requirement date (as in RRP3)
    3. Does PPDS Considers
    Goods Issue Time, Goods Receipt time, Load Time / Pick Pack time for scheduling the order or for total duration of the order. As in DS it can show if the order can be on time or delayed with respect to delivery time! (in Network view of DS) so it considering the transit time and all other time maintained!
    Please let me know how to straighten these things out!
    Thank you in advance

    RK,
    However in RRP3 and Planning Book and DS board I am getting the delivery date only, Is there something I need to check on customizing for this, please suggest!
    The date that is displayed in these screens is the requirement date used by planning. 
    Are you attempting to implement ATP in SCM?  Delivery/transportation scheduling must be performed in SCM.  During GATP, delivery date from ERP is passed to SCM.   SCM performs scheduling and calculates the MAD.   Without the scheduling, then delivery date = MAD.  http://help.sap.com/saphelp_scm700_ehp02/helpdata/EN/05/f8923945b12c4de10000000a114084/frameset.htm
    Best Regards,
    DB49

  • I have an apple tv that wont stream video and wont automatically set date and time

    Would like help setting up apple tv
    I can stream netlix with no issue with my  iPad and on both a notebook PC and desktop
    The apple TV says its connnected to the internet when I check internet settings however it will not set the date and time upon initial power up and I cannot view any internet content

    This sounds like a port issue. Somebody (possibly wjosten) posted a list of ports that need to be open in order for the ATV to work correctly.
    Check your router set up and see if there are any services that are open for your iPad but blocked for the ATV

Maybe you are looking for