Data are not being applied at destination side

Hi all,
I have implemented real time streams replication(not archive log based downstream replication).
source:9.2.0.8.0
destination:10.2.0.2.0
Capture and propagation is working fine. DBlinks are also fine. Apply process is running , but data are not being applied in destination side.
The trc file shows this:
Dump file /dev1/visdb10/10.2.0/admin/VIS_wbsebdev1/bdump/vis_p001_14628.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /dev1/visdb10/10.2.0
System name: Linux
Node name: wbsebdev1
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Instance name: VIS
Redo thread mounted by this instance: 1
Oracle process number: 21
Unix process pid: 14628, image: oracle@wbsebdev1 (P001)
*** SERVICE NAME:(SYS$USERS) 2008-05-29 11:39:26.957
*** SESSION ID:(388.16) 2008-05-29 11:39:26.957
The Alertlog file shows at the end this:
Thu May 29 11:19:06 2008
Streams APPLY A001 with pid=16, OS id=9531 stopped
Thu May 29 11:21:25 2008
Incremental checkpoint up to RBA [0x746.d359.0], current log tail at RBA [0x746.d471.0]
Thu May 29 11:39:26 2008
Streams APPLY A001 started with pid=18, OS id=14624
Streams Apply Reader started P000 with pid=20 OS id=14626
Streams Apply Server started P001 with pid=21 OS id=14628
Thu May 29 11:41:33 2008
Incremental checkpoint up to RBA [0x746.11565.0], current log tail at RBA [0x746.121b9.0]
Pls help.
Thanking You,
Nitesh.

Problem solved.

Similar Messages

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • OHS - Protocol (Periodic) Next due dates are not being captured properly

    Protocol (Periodic) Next due dates are not being captured properly in the Planning Cockpit (EHSH_D_PCP) report nor the Protocol report (S_SH8_7200013).  The Planned date is not resetting itself for the medical service sometimes.
    Any idea what might be causing this issue?
    Regards
    Naveen

    HI Naveen
    Have you overridden the std BADI for calculating Next due date?
    Thanks
    Jagdsh

  • DHCP Option Tags are not being applied...

    Hi,
    About to loose my mind... basically we are working towards a small WYSE Thin Client deployment in our environment.  The WYSE clients require to receive certain DHCP Option Tags to find the WCM server of which they receive their configuration from.  Same
    applies to the WDM Server as well.  The problem is no matter what we do, our test client is not receiving the custom option tags we've defined in our DHCP server.  
    DHCP Servers:
    vlan41
    10.40.1.206
    10.40.1.207
    Test Client:
    vlan46 - ip helpers defined on the switch
    Set to receive the same ip address from the DHCP server through the reservation route.
    Option Tags:
    186 - WDM Server - 10.40.1.184
    195 - WCM Server - 10.40.1.185
    196 - WCM Path - / 
    I've installed Wire Shark on the test client to monitor the DHCP activity.  The above custom options tags are not being pushed on to the client.  
    The Router, DNS Server and Domain Tags are being pushed.  So it's working but also not working????!!!
    Anybody with some insight to this problem?

    Hi hpaul_p
    In all fairness I'm about to give up... the vendor is not coming up with a solution and constantly blaming Microsoft.  To further test and confirm this wasn't a network issue, I've setup a secondary test environment using a 4 port switch, a client and
    a DHCP server.  Same results!!!  I'm really running out of time, so my work around is this:  I've setup a SRV records pointing to the WCM server... in your case this would be SRV record for the WDM server.  I've disabled the auto
    discovery functionality of the WDM Agent, for some reason it seems to be clashing with the WCM agent.  Since you will be using WDM only, don't disable auto discovery, tick the DNS SRV record from the Discovery Settings under the client agent. 
    I'm going to add the clients to the WDM server manually through their ip addresses so don't need auto discovery. From what I gather from the manuals the WCM searches for the repository or conifg servers in this order:  1. SRV 2.DNS (A record)
    3.DHCP (Options), I bet it's the same with WDM.  Though SRV and DNS methods has their limitations, if you will be using the default paths and credentials it shouldn't be a problem.  This is all I have have.  Steven Song I've forwarded you the
    DHCP database, if you find any problems with it please let me know.

  • Image Colour Profiles are not being applied

    When I import images in to InDesign CC 2014 the embedded colour profiles are not being activated.
    Therefore images are looking flat and a bit washed out on screen.
    In order to apply the colour profile I have to right click on the image go down to Graphics and the colour settings and select the correct profile.
    In the InDesign colour settings menu I have Colour management policies set to Preserve Embedded Profiles on RGB and Preserve Numbers (ignore linked Profiles) for CMYK. However changing these to other options makes no difference, the profile still need to be activated on each image.
    I am working with RGB images that have the Adobe RGB 1998 profile embedded in them.
    I cannot figure out why this is happening!??

    Check your color settings.

  • Changed Dates Are Not Being Saved

    I bought a video capture device and am editing a bunch of old family films. I'm using the latest version of iMovie and am having problems with the clip dates. I can adjust the clip date in iMovie, to say 1984, but when I close iMovie and re-open it, the date is back to 2009. How do I get the clip dates to be saved so that I can organize my old movies?

    After you capture your films and split them into logical clips (I use MPEG Streamclip to split), then you can rename your clips in this format:
    clip-yyyy-mm-dd hh;mm;ss.ext
    where hh is hours in 24 hour time. ext is the current extension (e.g. dv, mov, mp4, etc.
    Then restart iMovie.
    Do not do this for clips referenced in projects that you have already started. It will break the links.

  • ASA-5585-X 8.4(6)5 Idle connections are not being removed according to timeout settings

    Hi,
    Just a quick question if anybody has run into a bug where the ASAs "timeout" settings are not being applied to idle connections.
    It seems that our ASA running the software level 8.4(6)5 is not tearing down connections. This mainly seems to be a problem in one Security Context where there are around 300k UDP connections (related to VOIP phones) that are not being torn down. Idle timers on the connections are going as far as 700 hours. Common to all the UDP connections is also the fact that only 19 Bytes of data has been transmitted on the connection built on the firewall. I am not sure what the purpose of these UDP Connections is as both the source and destination port is a random high port.
    I was not able find any Bug ID which description would match the situation I am seeing. I did not see anything in the release notes of 8.4(7) or its interrim release either that would list thing kind of bug.
    - Jouni

    Hi Jouni,
    This caveat seems to be the closest match as 8.4.6 is the affected ASA code.
    CSCuh13899
    Symptoms:-
    Some connection may not removed even after reaching idle timeout.
    https://tools.cisco.com/bugsearch/bug/CSCuh13899/?reffering_site=dumpcr
    You can upgrade to the next stable ASA code as suggested in the referred document.
    HTH
    Regards,
    Dinesh Moudgil
    P.S. Please rate helpful posts.

  • Rules in Mail not being applied after Mavericks update

    Hi everyone, I know there are a lot of threads already discussing similar issues, but so far I've been unable to find one that helps resolve my particular issue. Ever since upgrading to Mavericks my rules are not being applied in Mail. I will give you a screenshot of one of my rules:
    I have about five rules that follow the same pattern: search for particular string in the FROM field and mark it with a color if the string is present. These rules all worked fine in Snow Leopard. All of my rules are still present after the upgrade and all checked as active. When I "select all" messages in my inbox and press Option-Cmd-L the rules are applied properly. However, the rules are not applying themselves when new mail comes in. As far as I can tell this does not have anything to do with the mail not being recognizes “as a new message” like, for example, because the mail was already read on my phone. It happens even if my other devices are offline and the only thing I am using to check mail is my laptop.
    I am using a MacBook Pro 2.3 GHz Intel Core Duo with OS X 10.9.1, in case that matters.
    Thanks for any advice!

    I think I've found at least a partial solution to the Mail - Rules Don't Work problem:
    In "Mail" go to the menu Mailbox and click on Rebuild.
    If you have a lot of stuff, this will take several minutes to finish.
    I also reviewed all my rules and made a few minor changes.
    Mixed results:  I found that running "Apply Rules" didn't work on email already received; but new mail did.  I don't quite understand that, but I call it a partial success.

  • Security constraints not being applied after using custom login module

    I am using form based authentication and I applied the custom login module - DBProcLoginModule to work with the embedded OC4J (JDeveloper 10.1.3.2). I have specified two security contraints in web.xml. The authentication is working correctly, however the security contraints are not being applied. All users are able to access all url resources. The security constraints were working properly before applying the custom login module. Pls help.
    Leena

    Hi,
    if "All users are able to access all url resources" then this indicates that the RL isn't properly protected. If the authorization would fail then noone would have access and you would see error code 401
    Make sure the role names in web.xml are the same as added by the LoginModule. Also make sure you set the dynamic.role property and the custom security provider property in the orion-application.xml
    <jazn provider="XML">
         <property name="custom.loginmodule.provider" value="true"/>
         <property name="role.mapping.dynamic" value="true"/>
    </jazn>
    Note that the above is not required (because done automatically) if the custom LoginModule configuration is deployed through the orion-application.xml file
    Frank

  • Data access disrupters  (DAD's)are not being displayed on control panel

    Hi,
    Data access disrupters are not being displayed on Application server control panel (sid.host.domine > HTTP Server > mod_plsql Services >DAD's ) But users are able to access their applications.
    Not able to see database access details through Application server control panel. Can you please tell me where could be the problem exists..
    Thanks,
    DJ

    I am assuming you mean Discriptors (instead of Disrupters) and I am not sure which release of Application Server you are running. But assuming it is 9i (say 9.0.3 on Windows), if you select the OC4J instance or container the applicatlion was deployed to. You will see a link to Data Sources displayed below Application Defaults.
    The files equivalent will be found in your <ORACLE_APPSHOME>\j2ee\<INSTANCE_NAME>\config\data-sources.xml

  • In the attached VI I dont understand why data from the inner case structures are not being transmitted to the array.

    In the attached VI I don't understand why data from the inner case structures are not being transmitted to the array.
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    TEMP.vi ‏25 KB

    It took me some time to figure what you are trying to do but I think I have it now.
    The SR is still required.
    What is happening is your "Bundle By Name" is replacing all of the fields of the cluster, not just the value coming out of the case structure. So to maintain the cluster stuff you do in earlier iterations you can either...
    1) Put the "Index array, Bundle by name, and Replace array" inside the case structure and ONLY bundle the value you are setting in that iteration. (as you will see Tim post shortly)
    OR
    2) Move the Index array before the Case, unbundle all of the fields and feed teh case structure and run them across the case so that ALL of your output tunnels come from the coresponding input tunnel EXCEPT for the filed you are trying to set.
    Ben
    Message Edited by Ben on 05-05-2010 01:31 PM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Notifications are not being generated for any emails that have rules applied to them.

    Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

    In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
    that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria.  PLease check
    1) whether your rule has trun on alert supression
    2) Close the alert, craised by rule,  and do it again
    Roger

  • Per-service SID's are not being granted correct permissions

    Hi,
    I had posted this here :
    https://connect.microsoft.com/SQLServer/feedback/details/770984/per-service-sid-s-are-not-being-granted-correct-permissions, but no response as yet.
    When installing SQL 2012 (on a VMWare VM), based on the following article :
    http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110), I have noticed that the SQL per service SIDs are not being granted the correct permissions. From the initial install, the following is what was observed (the red x's being permissions that
    should have been granted but were not).
    When re-installing and changing from specifying a domain account, to the default values, during set-up, the 4 service SIDs that were not added to 'Log on as a Service' initially were then correctly granted permission, but the other 4 in 'Bypass traverse
    checking', 'Adjust Memory Quotas for a process' and 'Impersonate a Client after authentication' were still not added.
    When running a repair on this install, 'NT Service\MSSQLFDLauncher' was then granted the correct permissions, but 'NT SERVICE\MsDtsServer110' was still missing 'Bypass traverse checking' and 'Impersonate a Client after authentication'.
    This also resulted in the installation of Reporting Services - Native failing in the original installation with 'Attempted to perform an unauthorized operation'.
    If anyone has recently installed SQL 2012, can you check (via gpedit.msc) that the correct 'User Right Assignment' was granted to the per Service SIDs as per
    http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110) ?

    Have you resolved this yet?  Group policy for the OU with my desktop removes all SQL per-service rights.  If group policy is your issue, I'd be interested in how some are retained.  
    Randy in Marin

  • My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

    My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

    Hello transcend94,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    iTunes: Understanding iTunes Media Organization
    http://support.apple.com/kb/ht3847
    Avoid using different versions of iTunes, or you may be unable to locate content, or may import or transfer content to the wrong location.
    Best of luck,
    Mario

  • Null offset from calibration not being applied to output

    I am measuring some load cells using a I 9237.  I am setting the null offset using Device > Bridge Calibration in the DAQ Assistant.  I measure the offet and hit calibrate.  It says "Calibration successful" and I hit finish, but the offset value is not applied to the data.
    How do I get this to work?

    Hello IamRubber,
    How can you see the calibration not being applied?  Are you running the same DAQ Assistant to see the offset?  If possible, please attach a screenshot from before/after running bridge calibration.
    Patrick W.
    Applications Engineer
    National Instruments

Maybe you are looking for