Data Arrives to PSA but does NOT add any records to ODS.... WHY?

Hi Gurus:
I have a unique isseu. My dada form an info-object arrives successfully to PSA. But this data does not get added to ODS. I know that ODS does not contain these records and PSA does show these records. There are no errors but zer records are added to the ODS. Has anyone come across this before? Am I missing somethign??
Joe-Smith

r u loading parallelly to PSA and data target (or) PSA and then into Data target..
which flow u r following...
otheriwse u delete that request in DSO as anyhow it got 0 records from PSA...
and go to PSA(data source) manage and select the request u need to update and click on UPDATE WITH SCHEDULER option in that window and start...
let us know the status...after that...
rgds,
nkr

Similar Messages

My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either. I uninstalled the program and reinstalled again but nothi

my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regards

Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

# Question
I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
So IMO we can divide image processing into:
operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
RP

HT1688 I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content.

I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?

You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.

Applet detect new particeipent but does not show any output.

hi,
I have written one applet which uses AVReceive2 as inner class.
This applet detects new particepent joined but does not take any action like showing or playing movie.
I cant understand where I am wrong.

Doublechecking, KAT ... is the Device Screen looking a bit like the following screenshot?
Which particular Windows OS are you using? (XP, Vista or 7?)

I have a problem that my phone only vibrates but does NOT ring any more. No matter what I try to do with settings turning off "silent" or whatever nothing helps. Do I need to reset. what are the consequences of resetting?

I have a problem that my phone only vibrates but does NOT ring any more. No matter what I try to do with settings turning off "silent" or whatever nothing helps. Do I need to reset. what are the consequences of resetting?

What a numpty! Yes of course you're right.
Couldn't find the answer when searching the forum but then came accross this.
Next dumb question coming up! :-(

Hey...... my ipod touch 2g wifi dose not work.... it connects to the network but does not open any of the web pages or internet acess!! HELP ME???

Someone plz help me out with this problemm... My IPOD TOUCH 2G connects to the wifi network but could not open any of the web pages... i've tried SAFARI, FIREFOX, and OPERA.... nothing in wifi retrieves data!!! it makes me so angry...
possible reasons???? i've searched net.. and many of the people r having these problems... maybe with the ne iOS4.2.1
HELPPPPPPPPPPP????
...Fateh

- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reser>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does the iPod successfully connect to other routers?

This Formula(Function) compiles but does not display any result

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

Datasource 0WS_TAROBJ_ATTR does not extract any record

I am using the datasource 0WS_TAROBJ_ATTR to get data from CRM to infoobject 0WS_TAROBJ. However, this extractor is not loading any record.
According SAP information and some forum discussion, I have found that the datasource WS_TAROBJ_ATTR loads data from the table CRM_SVY_RE_TAOBJ.
There is no data into this table, even in production environment.
I have found the SAP Note 785261 (CRM survey: Missing entries in table CRM_SVY_RE_TAOBJ) that describes a similar situation. I have applied it and after that I have provide a full repair from 0SVY_DATA_1 in order to fill out this table. However it did not work properly and the table still empty.
Could you please, someone helps me on this issue?
Thanks in advance,
Silvio Messias

No comments!

Select statement works in 8.1.5 but does not work in 8.1.7 why???????

I have written a select statement as part of cursor in a
Database Trigger, the following statement works fine in Oracle
8i ver 8.1.5.0 but the same statement returns error PLS-00103
(Parser related error) in Oracle 8i version 8.1.7.0!!!!!!
The error shown is
PLS-00103Encountered the symbol")" when expecting one of the
following:
from
The Sql statement in a Database Trigger is as follows
select opn_stk,iss_qty,rec_qty,ROWID
from mnth_bal
where to_date(lpad(to_char(month),2,'0')||to_char
(year),'mmyyyy') >= SYSDATE AND
REV_NO = :NEW.REV_NO AND
ITEM_STOCK_ITEM_CD = :NEW.ITEM_CD and
unit_cd = :NEW.unit_cd and
store_cd = :new.store_cd
order by to_date(lpad(to_char(month),2,'0')
||to_char(year),'mmyyyy') ;
Can any one please tell me whats the problem ? In 8.1.5.0 the
same statement in the trigger runs absolutely fine &
compiles.Because of this problem the trigger is not compiling in
8.1.7.0
Would be grateful for any solutions given

Relating line numbers in compile errors to source code.
Oracle does not count blank lines in line numbers. Commenting
with "--" blank lines or deleting blank lines will make the line
counter more accurate.
Oracle counts comments delimited with /*...*/ as one line, no
matter how many lines are in the source code. Using only "--"
will make the line counter more accurate.
Oracle does not count lines before the PL/SQL block DECLARE when
compiling triggers. (CREATE ... TRIGGER....FOR EACH...WHEN(...))
parts of the syntax are not counted. The line in the source
code with the DECLARE of the trigger's PL/SQL block will be line
1.
Hint: Avoid uncertainty. Use "SHO ERR TRIGGER <trigger_name>"
when looking at compile problems.
Good Luck....

When trying to statup with install disc inserted,all i get is an apple logo.when i try starting using command v it seems to see the cpu,but does not list any drivers.any thoughts appreciated!

when trying to startup with install disc inserted,all i get is an apple logo.when using command v keys,it seems to see the cpu, but doesn't list any drivers.any idea what,s wrong?

That is the wrong system disc, the Mid 2007 Mac Mini's originally came with Tiger 10.4. You must have been sent the wrong disc, because that gray 10.6 system disc is obviously for a later Mac.
Mac mini (Mid 2007) - Technical Specifications
At this point I'm afraid that your options are very limited.
1. Call Apple, have your serial # handy and ask for a replacement Tiger disc set. Problem is that it wouldn't be of much use, except for maybe running the Apple Hardware Test.
Apple - Support - iMac - Service FAQ
2. Purchase a Retail Snow Leopard Upgrade disc.
Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
As for the RAM, if 2GB is shown in both Apple / About This Mac and in the Activity Monitor then there is a pretty good chance that's it OK. Of course it is hard to test without the original disc set and in your case may need to be done with a third party RAM checker like Memtest OS X

FDM for PBCS - Drill Thru does not return any records in landing page

This is referring to the Data Management functionality in PBCS, not on-premise FDMEE.
I loaded in a file, for example:
Region|Product|Account|Amount
10|100|1000|9,000
10|100|1000|1,000
In FDM, I am using a multi dimensional map to derive another field. For example, if Region is 10 and Product is 100, than Department = 555.
so in FDM, I would end up with
10|100|1000|555|9,000
10|100|1000|555|1,000
Once loaded to PBCS, that loads in as:
10|100|1000|555|10,000
I built a form that shows this intersection, and then 'drilled to source'. When I get to the FDM landing page, there are no records shown. Is this because the derived field (department) does not exist in the source, or am I doing something wrong?
Appreciate any help.

Do you have access to the server logs by any chance?
Can you check the dimension class for your Scenario dimension in your target application? is it set to SCENARIO?
not showing source records is typically related to FDMEE not finding values in TDATASEG table.
HTH

Mapping executes fine but does not produce any output

I created a mapping to copy values from one table to another for a particular condition. I have data for thsi particular condition in the input table.
The Mapping validated fine and was deployed successfully.
The OWB Mapping is run from Unix.
The mapping executes fine without any issues but it does practically nothing. The target table has no data.
Need any more details on this? Please help.

Generate the code at Mapping Editor and execute it manually. Probably you have to modify the where clause.

On down loading a file the download windo appears but does not liost any files. The same happens under Thuinderbird. Has appied for about the last 2 or 3 weeks. I have the latest upgrades as of 8/18.

When I down load a file the down loads window opens but no files are listed there. (This also happens under Thunderbird). I have updated both T'bird and Firefox in the last couple of weeks. The download window was working ok , say, about 3 weeks ago. About then I cleared an existing lsit of files. Since then, nothing is shown even tho I have downloaded a few files.

alternitive soltuion:
                I have finally figured this out.
                The VMM service runs under the Local System account, I changed it to use the domain account I logged in with. I also had to change the SQL service account to use the same domain account the VMM service runs under.
Prior to performing the above actions, I modified the certificate in MMC > Certificates to not use the Smart Card option from the users profile. Shown below. To make this modification. Follow these steps.
1.       Open MMC
2.       Open > File > Add/Remove Snap-ins
3.       Select Certificates, and click Add (ensure Current – User is selected)
4.       Click OK
5.       Navigate to > Personal > Certificates
6.       Double click on the user Cert
7.       Select the Details Tab, > click the Edit Properties
8.       Select “Enable only the following purposes
9.       Uncheck Smart Card Logon
After the above actions was performed, I then modified the service account the VMM and SQL service was using to use a domain account, and things started working.
Richard Dixon MSFT
Sr Systems Engineer

Data Arrives to PSA but does NOT add any records to ODS.... WHY?

Similar Messages

Maybe you are looking for