Data base for song info?

Is there a data base or site that has info for song tags? In particular I want the date released for all my songs.
Thanks for any help?

I am in the UK and I have been searching for years for such a site, or for this particular information. Gracenote DB is no help at all for this I'm afraid. Unfortunately, record release dates - especially for older songs, is elusive. I have done the following research :
1. In the UK we are lucky enough to have the Guinness Book of British Hit Singles : this gives the chart entry date for all Top 75 hits going back decades. For 98% of releases this will give an approximate indication (I subtract two weeks to allow for radio play).
2. The music papers always used to list the single releases for the week, but this needs a lot of time and research to uncover.
3. For non-chart records, you could try Googling the record's catalogue number, then keep going forward & back one number at a time until you find a release that charted, then work it out from that.
I have nagged record companies to produce a book of release date information,but their response always is "who'd pay for it?"
I think this is one tag you are going to have to research on your own. Sorry

Similar Messages

  • Problem when saving the Data basis for the Consolidation

    Hi Gurus,
    I am having 2 problems.
    1) When i try to execute the UCWB transaction . It gives an information message
    " Data basis DB needs to be generated (after upgrade) . I am following the procedure given in that "<b>Run maintenance of data basis DB in display mode. Go to the "Data Streams" tab page. Choose the "Generate" button.
    If changes to Customizing settings are permitted in the current system or client, as an alternative you can maintain the data basis in change mode and save. In the case of systems supplied with Customizing transports, as an alternative you can generate the data basis in the source system and then transport it again.</b>
    Even after doing that procedure when i again execute the UCWB. it give me the same message.
    2) when is try to save data basis for the consolidation . it give me this error message.
    "Field 0HC_ATCCODE: This compound differs from that of basic field 0HC_MEDCTG"
    I have checked the referenced Info objects . Checked the compound info objects. Activated them again. They dont differ in any way. but still i get this problem.
    Please help me out. If someone has come across this error and solved. Please help me.
    Regards
    satish

    Hi satish,
    I constantly receive the message like your #2 saying that it was a critical change in X infoobject. It's just a warning and I found several OSS notes saying that this message is not correct. Just ignore it.
    In case of your Q #1. The data basis might be generated in two ways: by pressing Save icon and by clicking the Generate icon (the system refers just to this very option) and then - Save. The last way is used in Productive environment. Try it.
    Hope this helps.

  • Data source for 0REGION info object

    Hi.,
    I need to load master data text for 0REGION info object. Can any one tell the standard data source for 0REGION.
    Thanks,
    selva

    Hi Kumar,
    Try these following data sources and choose the opt one.
        0TV_REGION_TEXT
        0CML_REGIN_TEXT
        0FS_REGCON_TEXT
        0EC_REGION_TEXT
        0REGION_TEXT.
    With Regards,
    Ravi Kanth.

  • Error opening data base for the library for Aperture

    Hello,
    I have been using Aperture all day and for some reason am now getting this error message when trying to open it again.
    Te was an error opening the data base for the library "users/*******/pictures/aperture3triallibrary.aplibrary
    Has this happened for anyone else?
    Many Thanks

    When I hold down ⌘⌥ firmly, at the same time, and with these keys held down double click the Aperture library that I want to repair, I get this panel:
    Then, when I select "Repair"  Aperture will show a progress bar and the Dock icon will stay highlighted.
    When it is finished, the Aperture window will open.
    When I select repair, it seems as though it doesn't run. I don't get a dialog box to confirm it's happening and on the dock the little light under the Aperture icon isn't lit, which seems it is'nt open or running.
    After you select "Repair", does the panel close and then nothing? Or does the panel not react?
    I still don't see fully, what is going on on your mac.
    But it is a good sign, that you can create a new library. That suggests, that Aperture is running correctly on your mac, and "only" your old library has a problem. Try to test the new library - import a few images and try to adjust them.
    Once you are convinced, that the new library is working well, you have three options.
    Try "Rebuild" instead of "Repair".
    Or try to import your old library into the new library (Aperture's main menu bar > File >Import > Library) - that is another approach to rebuilsd the library.
    Or restore from backup. To restore from Time Machine, open a Finder Window showing your Aperture library, and then enter Time Machine. Go back in time to the most recent date that has a working Aperture library and select "Restore". If you have enough space on your disk, restore to a different folder and don't overwrite your current library.
    Regards
    Léonie

  • Can't open aperture 3,  warning box comes up," warning there was an error opening the data base for the library /pictures/aperture library .aplibrary  Whats up?

    I have had Aperture 3 loaded on my computer for a while now. Never had any problems till tonight. Restarted my computer and went to open Aperture and a "warning" box poped up, There was an error opening the data base for the library /picture/aperture library ap library.   Then a "quit" button.
    What is going on and how can I open my aperture. I have pictures that need worked for clients.  Help!

    Have you run through the steps in Aperture 3: Troubleshooting Basics. If not that's always a good place to start.
    If that doesn;t resolve the problem when you post back describe your hardware and software setup.
    good luck

  • Library Update rqstd on Aperture 3.2; now won't open get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"   TIme machine won't load backup "error code -8003"

    Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
    now Aperture won't open,  get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"  
    TIme machine won't load backup "error code -8003"
    Tried reloading Aperture 3.2 but get same result.

    You’re running an outdated copy of Safari on your Desktop. That won’t work.
    In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
    If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • Equivalent Data Field for 0EXRATEXACC Info Object

    Hi Gurus,
    I have created a DSO using 2lis_13_VDITM data source by installing the same Info Source. Here i am not able to find the Equivalent Data Field for 0EXRATEXACC Info Object which is in Transfer Rules.
    So, Please let me know the Equivalent Data Field for 0EXRATEXACC Info Object.
    Points are assigned defenetely.
    Thanks in advance
    Peter B

    Hi,
    U have a field KURRF in table KURRF
    *Assign points if helpful.

  • Error:Unable to determine data basis for virtual InfoCube.

    Hi all,
           I am working on Virtual cubes. I have created a query on virtual cube which is getting loaded from a transaction cube. I am using  a transaction cube which is a  copy of standard cube <b>0BCS_C10 - Consolidation (Company/Profit Center).</b> (Transaction cube).
    When I execute the query in BEX it is disconnecting from the server and if I execute the same in transaction <b>RSRT</b> it is showing following errors.
    1.Unable to determine data basis for virtual InfoCube.
    2.Error reading the data of InfoProvider.
    3.System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
    Will be thankful for suggestions.

    Hi Pankesh,
    Thanks for the response..
            Transaction cube contains data and characteristics of virtual cube are  consistent.
              I am trying to see the contents of the virtual cube in transaction <b>LISTCUBE</b>, there also its showing same errors.
    How can I proceed now?

  • Data base for mobile

    mobile asks for data base of server am with sky

    Hi Jyothi,
    IBase forms a stnd tileset under bus component Accounts in MSA.Whether its demarcated to viewing,depends on the bus context.
              Info about Ibase is of immense help for Sales/Serv Pro, working for service intensive products like Gas turbines/Space Propulsion systems et al wherein a substantial portion of revenue stream is realised from MROs( esp A&D Comp),for account maximization.(Barring Planned Services for getting more IBases into the Serv Product Portfolio).
      I hope you could decipher the scenario..
    Wregds,
    A.R.Prasad.

  • APPLE LOOPS AS BASE FOR SONG - CAN I USE IT? - 3RD PARTY?

    I have used an iLife Loop as the basis for the pre chorus and chorus of a song I have created. The rest is mine and I have written lyrics for the whole.
    It seems to me that a third party wrote the jingle and could have a claim on this. Is this correct?
    If so then how would I find out who that is and gain permission and or assign part of the copyright to them should income come from the song?
    The Logic Pro and MainStage software license agreements state:
    "Title and intellectual property rights in and to any content displayed by or accessed through the Apple Software to the respective content owner.
    Such content may be protected by copyright or other intellectual property laws and treaties, and may be subject to terms of use of the third party providing such content.
    Whilst the use of the Loop from Apple's point of view seems to be OK this clause, prior to that muddies the waters. Anybody have any insight on this please?
    Thanks
    Nic

    The instructions depend on which Windows backup product you use. Apple doesn't make one.
    (98279)

  • Logical data base for license revenue report.

    Hi All,
    My requirement is to create "license revenue report through SAP Query with following fields:
    VBAK:
    Sales Document,Sales Doc type,net value of sales order in document,sales org,distribution channel,division,sales office,business area,customer purchase order number,customer purchase order date,sold to party.
    VBAP:
    Sales document item,target quantity in sales units,target quantity in UOM,usage indicator,billing block for item,business area,plant(own or external),
    origin of bill of material,net price,SD document currency,material pricing pgroup,account assignment group for this material,activity type,personnel number.
    VEDA:
    contracts start date,contract end date,date on which contract is assigned.,installation date,agreement acceptance date
    VBREVK:
    clearing account for accrued revenues,clearing accountkey(offsetting account),total accrued value,currency key,amount in document currency,posting year and posting period.
    VBREVE:
    revenue amount,currency key,accrual period,company code,country of destination,profit center,posting year and posting period,amount in document currency,gl account,account for deferred revenue,account for non billed receivable
    Is there any  standard logical data base which gives all the required fields mentioned above? since i am not SD consultant i am not sure whether i have to take only above tables exactly or not
    there are certain logical databases like SD_ORDER,SD_SALES_DOCUMENT which has tables VBAK,VBAP,VEDA but i am unable to join remaining tables  VBREVE and VBREVK with those logical data bases
    Please provide some valuable suggestions on this.
    Thanks&Regards

    Hi All,
    My requirement is to create "license revenue report through SAP Query with following fields:
    VBAK:
    Sales Document,Sales Doc type,net value of sales order in document,sales org,distribution channel,division,sales office,business area,customer purchase order number,customer purchase order date,sold to party.
    VBAP:
    Sales document item,target quantity in sales units,target quantity in UOM,usage indicator,billing block for item,business area,plant(own or external),
    origin of bill of material,net price,SD document currency,material pricing pgroup,account assignment group for this material,activity type,personnel number.
    VEDA:
    contracts start date,contract end date,date on which contract is assigned.,installation date,agreement acceptance date
    VBREVK:
    clearing account for accrued revenues,clearing accountkey(offsetting account),total accrued value,currency key,amount in document currency,posting year and posting period.
    VBREVE:
    revenue amount,currency key,accrual period,company code,country of destination,profit center,posting year and posting period,amount in document currency,gl account,account for deferred revenue,account for non billed receivable
    Is there any  standard logical data base which gives all the required fields mentioned above? since i am not SD consultant i am not sure whether i have to take only above tables exactly or not
    there are certain logical databases like SD_ORDER,SD_SALES_DOCUMENT which has tables VBAK,VBAP,VEDA but i am unable to join remaining tables  VBREVE and VBREVK with those logical data bases
    Please provide some valuable suggestions on this.
    Thanks&Regards

  • User Preset Data Base for Logic Pro's instruments - Synths, etc

    I realize Logic Pro 9 comes with more instrument presets than any one person can audition in a single day, or a week or month for that matter. But I am looking for the data base where other users have shared their own settings. Line 6 has one for Pod Farm and despite their 1000 presets, I found what other users did to be super amazing. Back to Logic Pro, I searched last year for a Theremin sample and someone created it in one of Logic's synths and posted it.
    I can't imagine I'm the first person to ask this questions. I must not be searching correctly. Please help.

    Try this forum:
    http://www.logicprohelp.com/forum/viewforum.php?f=8

  • Multiple data sources for 1 info object

    hi all,
    i am working with ods 0fiap_003 info source overview u can see for 0comp_code
    Company Code: Attributes and Tests (Flexible Update) this is a transaction data  data source.
    G/L Account: Attributes (Flexible Update) this is a transaction data  data source
    G/L Account: Texts (Flexible Update) 0GL_ACCOUNT_TEXT   this is a transaction data  data source
    and there r master data data sources for these objects
    G/L Account  hierarchy text  attributes r available.
    so only for 0gl_account  5 data sources available.
    3 master data ds.2 flexible data trans data data sources.same for comp code.
    so how can we map for these 5 dsources  in this scenario.
    i am going to create process chains for master data(3) transaction data(1).
    should i put trans .data  info packages in the transaction data process chain
    ex: G/L Account: Attributes (Flexible Update) this one.
    plz suggest me
    regards
    sridhar

    Hi Sri,
    There can be multiple datasources assigned to a single master object. Only they should be unique per source system.
    Regarding process chain, u should include the infopackage for transaction data in trans data process chain. This is because ur job scheduling for master and transaction load would differ. So the process chains should be separate.

  • Is it possible to use same data source for two info cube

    Hi,
    My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
    Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
    Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
    "0IC_C03".
    Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
    and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
    Pls. help.
    Regards,
    viren.

    Hi,
    You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
    In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
    Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
    Cheers,
    Kedar

  • Data Base For iPhone

    I want a basic data base on iPhone to keep a list of movies.
    Are there any apps someone is aware of?

    there is a library for the app To connect to SQLServer DB?

Maybe you are looking for